Publikationen
2023
journal articleOvercoming water diffusion limitations in hydrogels via microtubular graphene networks for soft actuatorsHauck, M., Saure, L.M., Zeller-Plumhoff, B., Kaps, S., Hammel, J., Mohr, C., Rieck, L., Nia, A.S., Feng, X., Pugno, N.M., Adelung, R., Schütt, F. (2023)
In: Advanced Materials, 2302816.- journal articleAustenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steelRibamar, G.G., Escobar, J.D., Kwiatkowski da Silva, A., Schell, N., Ávila, J.A., Nishikawa, A.S., Oliveira, J.P., Goldenstein, H. (2023)
In: Acta Materialia, Vol. 247, 118742. - journal articleFirst-Principles Calculations of Elastic and Thermodynamic Properties for Multi-component Co-based SuperalloysTang, Y., Li, W., Li, C., Lu, S., Vitos, L., Pyczak, F. (2023)
In: Metallurgical and Materials Transactions A, Vol. 54, 1635-1648. - journal articleImpact of microstructure on elastic properties in the alloy Ti-42Al-8.5 NbGabrisch, H., Janovská, M., Rackel, M.W., Pyczak, F., Stark, A. (2023)
In: Journal of Alloys and Compounds, Vol. 932, 167578. - journal articleInfluence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laser Beam Powder Bed Fused S316L SteelBodner, S.C., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.A., Keckes, J., Eckert, J. (2023)
In: Advanced Engineering Materials, Vol. 25, 7, 2200524. - journal articleThe genus Plecia (Diptera: Bibionidae) in middle Miocene Dominican amberRosse-Guillevic, S., Peñalver, E., Hammel, J.U., León, A., Solórzano-Kraemer, M.M. (2023)
In: Historical Biology, Vol. 35, 5, 762-779. - journal articleX-ray microtomography investigation of damage fields ahead of cracks in CT and SENT C-Mn steel samplesKumar, R., Besson, J., King, A., Dahl, A., Morgeneyer, T.F. (2023)
In: International Journal of Fracture, Vol. 239, 233-254. - journal articleStacking fault formation in perovskite Ti3AlC carbides in a TiAl based alloy during creep at 800°CWang, L., Liang, X., Liu, B., Oehring, M., Paul, J., Liu, J., Song, M., Pyczak, F., Liu, Y. (2023)
In: Scripta Materialia, Vol. 222, 115034. - journal articleThe effect of temperature on load partitioning evolution in magnesium metal matrix composite reinforced with Ti particles using in-situ synchrotron radiation diffraction experimentsGarces, G., Medina, J., Perez, P., Stark, A., Schell, N., Adeva, P. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, 2, 706-719. - journal articleAdvice on describing Bayesian analysis of neutron and X-ray reflectometryMcCluskey, A., Caruana, A., Kinane, C., Armstrong, A., Arnold, T., Cooper, J., Cortie, D., Hughes, A., Moulin, J., Nelson, A., Potrzebowski, W., Starostin, V. (2023)
In: Journal of Applied Crystallography, Vol. 56, 1, 12-17. - journal articleHigh-oxygen MIM Ti-6Al-7Nb: Microstructure, tensile and fatigue propertiesAmherd Hidalgo, A., Ebel, T., Frykholm, R., Carreño-Morelli, E., Pyczak, F. (2023)
In: Materials Today Communications, Vol. 34, 104982. - journal articleCharacterization of Vapor Capillary Geometry in Laser Beam Welding of Copper with 515 nm and 1030 nm Laser Beam Sources by Means of In Situ Synchrotron X-ray ImagingKaufmann, F., Forster, C., Hummel, M., Olowinsky, A., Beckmann, F., Moosmann, J., Roth, S., Schmidt, M. (2023)
In: Metals, Vol. 13, 1, 135. - journal articleAnalysis on the influence of vapor capillary aspect ratio on pore formation in laser beam welding of aluminumHummel, M., Hagenlocher, C., Haeusler, A., Hollatz, S., Lind, J., Olowinsky, A., Gillner, A., Beckmann, F., Moosmann, J., Weber, R., Graf, T., Häfner, C. (2023)
In: Journal of Materials Processing Technology, Vol. 312, 117862. - journal article35 million-year-old solid-wood-borer beetle larvae support the idea of stressed Eocene amber forestsHaug, C., Baranov, V.A., Hörnig, M.K., Gauweiler, J., Hammel, J.U., Perkovsky, E.E., Haug, J.T. (2023)
In: Palaeobiodiversity and Palaeoenvironments, Vol. 103, 521-530. - journal articleEvolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formatsJakob, S., Lorich, A., Knabl, W., Stark, A., Staron, P., Clemens, H., Spoerk-Erdely, P., Maier-Kiener, V. (2023)
In: International Journal of Refractory Metals and Hard Materials, Vol. 110, 106032. - journal articleComparison on crack propagation under tension at 150 °C of Mg-2Zn-1.5Mn alloy sheets with and without crack notchLiu, Q., Song, J., Shen, Q., Wu, L., Jiang, B., Gan, W., Zheng, K., Pan, F. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, 5, 1536-1548. - journal articleBreak through the strength-ductility trade-off dilemma in aluminum matrix composites via precipitation-assisted interface tailoringMa, Y., Chen, H., Zhang, M.-X., Addad, A., Kong, Y., Lezaack, M.B., Gan, W., Chen, Z., Ji, G. (2023)
In: Acta Materialia, Vol. 242, 118470. - journal articleHard X-ray full-field nanoimaging using a direct photon-counting detectorFlenner, S., Hagemann, J., Wittwer, F., Longo, E., Kubec, A., Rothkirch, A., David, C., Müller, M., Greving, I. (2023)
In: Journal of Synchrotron Radiation, Vol. 30, 2, 390-399. - journal articleMultiscale morphological analysis of bone microarchitecture around Mg-10Gd implantsSefa, S., Espiritu, J., Ćwieka, H., Greving, I., Flenner, S., Will, O., Beuer, S., Wieland, D.C.F., Willumeit-Römer, R., Zeller-Plumhoff, B. (2023)
In: Bioactive Materials, Vol. 30, 154-168. - journal articleFatigue behaviour of multi-spot joints of 2024-T3 aluminium sheets obtained by refill Friction Stir Spot Welding with polysulfide sealantBernardi, M., Suhuddin, U., Fu, B., Gerber, J., Bianchi, M., Ostrovsky, I., Sievers, B., Faes, K., Maawad, E., Lazzeri, L., dos Santos, J., Klusemann, B. (2023)
In: International Journal of Fatigue, Vol. 172, 107539. - journal articleMicrostructures in arc-welded Al10Co25Cr8Fe15Ni36Ti6 and Al10.87Co21.74Cr21.74Cu2.17Fe21.74Ni21.74 multi-principal element alloys: Comparison between experimental data and thermodynamic predictionsShen, J., Martin, A.C., Schell, N., Fink, C., Oliveira, J.P. (2023)
In: Materials Today : Communications, Vol. 34, 104784. - journal articleMicrostructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metalShen, J., Gonçalves, R., Choi, Y.T., Lopes, J.G., Yang, J., Schell, N., Kim, H.S., Oliveira, J.P. (2023)
In: Scripta Materialia, Vol. 222, 115053. - journal articleAssessment of the capability of Zr, Y, La, Gd, Dy, C, and Si to enhance the creep strength of gamma titanium aluminide alloys based on their effect on flow stress and thermal activation parametersFröbel, U., Stark, A., Paul, J., Pyczak, F. (2023)
In: Materials Science and Engineering: A, Vol. 162, 108018. - journal articleDevelopment of a bioreactor-coupled flow-cell setup for 3D in situ nanotomography of Mg alloy biodegradationReimers, J., Trinh, H.C., Wiese, B., Meyer, S., Brehling, J., Flenner, S., Hagemann, J., Kruth, M., Kibkalo, L., Cwieka, H., Hindenlang, B., Lipinska-Chwalek, M., Mayer, J., Willumeit-Roemer, R., Greving, I., Zeller-Plumhoff, B. (2023)
In: ACS Applied Materials and Interfaces, Vol. 15, 29, 35600-35610. - journal articleOn the material dependency of peri-implant morphology and stability in healing boneBruns, S., Krüger, D., Galli, S., Wieland, D.C.F., Hammel, J.U., Beckmann, F., Wennerberg, A., Willumeit-Römer, R., Zeller-Plumhoff, B., Moosmann, J. (2023)
In: Bioactive Materials, Vol. 28, 155-166. - journal articleRapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processingEscobar, J., Gwalani, B., Silverstein, J., Ajantiwalay, T., Roach, C., Bergmann, L., dos Santos, J.F., Maawad, E., Klusemann, B., Devaraj, A. (2023)
In: Materials Characterization, Vol. 202, 112999. - journal articleDetailing the influence of PEO-coated biodegradable Mg-based implants on the lacuno-canalicular network in sheep bone: A pilot studyEspiritu, J., Sefa, S., Cwieka, H., Greving, I., Flenner, S., Willumeit-Römer, R., Seitz, J.M., Zeller-Plumhoff, B. (2023)
In: Bioactive Materials, Vol. 26, 14-23. - journal articleTechnical note on the determination of degradation rates of biodegradable magnesium implantsZeller-Plumhoff, B., Helmholz, H., Feyerabend, F., Dose, T., Wilde, F., Hipp, A., Beckmann, F., Willumeit-Römer, R., Hammel, J.U. (2023)
In: Materials and Corrosion, Vol. 74, 7, 1116-1119. - journal articleAnalysis of dislocation activity of Mg-Zn-Y alloy by using synchrotron radiation under tensile loadingHa, C., Kim, Y.M., Woo, S.W., Maawad, E., Letzig, D., Yi, S. (2023)
In: Journal of Synchrotron Radiation, Vol. 30, - journal articleComparing x-ray phase-contrast imaging using a Talbot array illuminator to propagation-based imaging for non-homogeneous biomedical samplesRiedel, M., Taphorn, K., Gustschin, A., Busse, M., Hammel, J.U., Moosmann, J., Beckmann, F., Fischer, F., Thibault, P., Herzen, J. (2023)
In: Scientific Reports, Vol. 13, 6996. - journal articleInvestigations on the tensile deformation of pure Mg and Mg–15Gd alloy by in-situ X-ray synchrotron radiation and visco-plastic self-consistent modelingXu, Y., Huang, Y., Wang, Y., Gan, W., Wang, S., Maawad, E., Schell, N., Hort, N. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, 2, 607-613. - journal articleIn situ observation of microscopic damage and crack initiation mechanisms in a filled EPDMKallungal, J., Chazeau, L., Chenal, J.M., Adrien, J., Maire, E., Barrès, B.Cantaloube, B., Heuillet, P., Wilde, F., Moosmann, J., Weitkamp, T. (2023)
In: Engineering Fracture Mechanics, Vol. 277, 109007. - journal articleMicromorphology of pineal gland calcification in age-related neurodegenerative diseasesBukreeva, I., Junemann, O., Cedola, A., Brun, F., Longo, E., Tromba, G., Wilde, F., Chukalina, M. V., Krivonosov, Y. S., Dyachkova, I.G., Buzmakov, A.V., Zolotov, D.A., Palermo, F., Gigli, G., Otlyga, D.A., Saveliev, S.V., Fratini, M., Asadchikov, V.E. (2023)
In: Medical Physics, Vol. 50, 3, 1601-1613. - journal articleOut-of-equilibrium formation of Ni3Ti η-phase in Inconel X-750 produced via laser powder bed fusion and spark plasma sinteringVolpato, G.M., Pereira, A.S.P., Lemos, G., Schmitt, M., Glatzel, U., Pyczak, F., Tetzlaff, U., Fredel, M.C. (2023)
In: Metallurgical and Materials Transactions A, Vol. 54, 1924-1936. - journal articleStability and physical properties of the L12-γ′ phase in the CoNiAlTi-systemPyczak, F., Liang, Z., Neumeier, S., Rao, Z. (2023)
In: Metallurgical and Materials Transactions A, Vol. 54, 1661-1670. - journal articleRole of solute in stress development of nanocrystalline films during heating: An in situ synchrotron X-ray diffraction studyWang, J., Li, X., Maawad, E., Han, L., Huang, Y., Liu, Y., Wang, Z. (2023)
In: Journal of Materials Science & Technology, Vol. 144, 188-197.
Zur Publikation beim Verlag 2022
- journal articleEffect of grain boundary segregation on microstructure and mechanical properties of ultra-fine grained Mg–Al–Ca–Mn alloy wiresZuo, J., Nakata, T., Xu, C., Xia, Y.P., Shi, H.L., Wang, X.J., Tang, G.Z., Gan, W.M., Maawad, E., Fan, G.H., Kamado, S., Geng, L. (2022)
In: Materials Science and Engineering: A, Vol. 848, 143423. - journal articleEarly Martensitic Transformation in a 0.74C–1.15Mn–1.08Cr High Carbon SteelKohne, T., Maimaitiyili, T., Winkelmann, A., Maawad, E., Hedström, P., Borgenstam, A. (2022)
In: Metallurgical and Materials Transactions A, Vol. 53, 8, 3034-3043. - journal articleWhich factor determines the optical losses in refractory tungsten thin films at high temperatures?Arya, M., Ganguly, A., Krishnamurthy, G.V., Rout, S.S., Gurevich, L., Krekeler, T., Ritter, M., Pedersen, K., Störmer, M., Yu Petrov, A., Eich, M., Chirumamilla, M. (2022)
In: Applied Surface Science, Vol. 588, 152927. - journal articleIn- and ex-situ study of the deformation behavior of the βo(ωo) phase in a Ti4Al3Nb alloy during high-temperature compressionLiu, X., Song, L., Liu, T., Stark, A., Pyczak, F., He, Z., Lin, J., Zhang, T. (2022)
In: Journal of Alloys and Compounds, Vol. 918, 165626. - journal articleResidual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniquesJászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E., Ebner, R. (2022)
In: Materials & Design, Vol. 221, 110936. - journal articleInfluence of defects on damage tolerance of Metal-Injection-Molded β titanium alloys under static and dynamic loadingXu, P., Ebel, T., Pyczak, F., Willumeit-Römer, R., Yu, S. (2022)
In: Powder Metallurgy, Vol. 65, 5, 354-364. - journal articleMultiscale analysis on otolith structural features reveals differences in ontogenesis and sex in Merluccius merluccius in the western Adriatic SeaPalazzo, Q., Stagioni, M., Raaijmakers, S., Bellemann, R., Prada, F., Hammel, J., Kaandorp, J., Goffredo, S., Falini, G. (2022)
In: Royal Society Open Science, Vol. 9, 5, 211943. - journal articleTi-Al3Ti metal-intermetallic laminate (MIL) composite with a cubic titanium trialuminide stabilized with silver: Selection of fabrication regimes, structure, and propertiesLazurenko, D.V., Petrov, I.Y., Mali, V.I., Esikov, M.A., Kuzmin, R.I., Lozanov, V.V., Pyczak, F., Stark, A., Dovzhenko, G.D., Bataev, I.A., Terentiev, D.S., Ruktuev, A.A. (2022)
In: Journal of Alloys and Compounds, Vol. 916, 165480. - journal articleUnconventional twin deformation of Ni-Mn-Ga 7M martensite under tension mediated by the collective lattice reorientation from a-c twin to b-c twinZhang, X., Li, Z., Li, D., Yang, B., Yan, H., Gan, W., Zhang, Y., Esling, C., Zhao, X., Zuo, L. (2022)
In: Acta Materialia, Vol. 227, 117729. - journal articleFunctional and multiscale 3D structural investigation of brain tissue through correlative in vivo physiology, synchrotron microtomography and volume electron microscopyBosch, C., Ackels, T., Pacureanu, A., Zhang, Y., Peddie, C.J., Berning, M., Rzepka, N., Zdora, M.-C., Whiteley, I., Storm, M., Bonnin, A., Rau, C., Margrie, T., Collinson, L., Schaefer, A.T. (2022)
In: Nature Communications, Vol. 13, 1, 2923. - journal articleNear-Surface and Bulk Dissolution Behavior of γ′ Precipitates in Nickel-Based VDM® Alloy 780 Studied with In-Situ Lab-Source and Synchrotron X-ray DiffractionKümmel, F., Fritton, M., Solís, C., Kriele, A., Stark, A., Gilles, R. (2022)
In: Metals, Vol. 12, 7, 1067. - journal articleCombining High-Resolution Hard X-ray Tomography and Histology for Stem Cell-Mediated Distraction OsteogenesisRodgers, G., Sigron, G.R., Tanner, C., Hieber, S.E., Beckmann, F., Schulz, G., Scherberich, A., Jaquiéry, C., Kunz, C., Müller, B. (2022)
In: Applied Sciences, Vol. 12, 12, 6286. - journal articleRevealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA IIIKrohmer, E., Schmeiser, F., Wahlmann, B., Rosigkeit, J., Graf, G., Spoerk-Erdely, P., Clemens, H., Staron, P., Körner, C., Reimers, W., Uhlmann, E. (2022)
In: Review of Scientific Instruments, Vol. 93, 6, 065104. - journal articleQuench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: An in situ SAXS and HEXRD studyGraf, G., Spoerk-Erdely, P., Staron, P., Stark, A., Mendez Martin, F., Clemens, H., Klein, T. (2022)
In: Acta Materialia, Vol. 227, 117727. - journal articleDiversity of schizomids (Arachnida: Schizomida) revealed by new fossil genera and species from mid-Cretaceous Burmese amber with implications for a Gondwanan origin of the Burma Terrane Get access ArrowDe Francesco Magnussen, I., Müller, S., Hammel, J., Kotthoff, U., Harms, D. (2022)
In: Zoological Journal of the Linnean Society, Vol. 196, 2, 792-844. - journal articleCracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrationsPlatl, J., Bodner, S., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A.G., Previtali, B., Keckes, J., Schnitzer, R. (2022)
In: Acta Materialia, Vol. 225, 117570. - journal articleAnalysis of the Microstructure Role in the Yield Asymmetry of Extruded Mg-LPSO Alloys Using In Situ Diffraction ExperimentsGarces, G., Medina, J., Perez, P., Stark, A., Lim, H.K., Kim, S., Schell, N., Adeva, P. (2022)
In: JOM, Vol. 74, 7, 2609-2621. - journal articleOxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatingsKainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D., Schalk, N. (2022)
In: Scripta Materialia, Vol. 211, 114492. - journal articleGeneralized pole figures from post-processing whole Debye–Scherrer patterns for microstructural analysis on deformed materialsBenatti, E.A., De Vincentis, N.S., Al-Hamdany, N., Schell, N., Brokmeier, H.-G., Avalos, M., Bolmaro, R.E. (2022)
In: Journal of Synchrotron Radiation, Vol. 29, 3, 732-748. - journal articleImproving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steelOliveira, J.P., Shamsolhodaei, A., Shen, J., Lopes, J.G., Gonçalves, R.M., de Brito Ferraz, M., Piçarra, L., Zeng, Z., Schell, N., Zhou, N., Seop Kim, H. (2022)
In: Materials & Design, Vol. 219, 110717. - journal articleTemperature Dependence of Hall–Petch Parameters Using In Situ Diffraction Experiments in AZ31 AlloyGarces, G., Clemente, A., Medina, J., Perez, P., Stark, A., Schell, N., Adeva, P. (2022)
In: JOM, Vol. 74, 7, 2622-2634. - journal articleA novel solution for controlling hardware components of accelerators and beamlinesKhokhriakov, I., Merkulova, O., Nozik, A., Fromme, P., Mazalova, V. (2022)
In: Journal of Synchrotron Radiation, Vol. 29, 3, 644-653. - journal articleFormation of the intermetallic phases Al12Mg17 and Al3Mg2 during heating of elemental Al-Mg composites studied by high-energy X-ray diffractionSanamar, S., Brokmeier, H., Schell, N. (2022)
In: Journal of Alloys and Compounds, Vol. 911, 165114. - journal articleSynchrotron radiation-based phase-contrast microtomography of human dental calculus allows nondestructive analysis of inclusions: implications for archeological samplesPower, R.C., Henry, A.G., Moosmann, J., Beckmann, F., Temming, H., Roberts, A., Le Cabec, A. (2022)
In: Journal of Medical Imaging, Vol. 9, 3, 031505. - journal articleIn-situ hot forging directed energy deposition-arc of CuAl8 alloyDuarte, V.R., Rodrigues, T.A., Schell, N., Miranda, R.M., Oliveira, J.P., Santos, T.G. (2022)
In: Additive Manufacturing, Vol. 55, 102847. - journal articleEffect of Si on bainitic transformation kinetics in steels explained by carbon partitioning, carbide formation, dislocation densities, and thermodynamic conditionsLin, S., Borgenstam, A., Stark, A., Hedström, P. (2022)
In: Materials Characterization, Vol. 185, 111774. - journal articleThe velvet worm brain unveils homologies and evolutionary novelties across panarthropodsMartin, C., Jahn, H., Klein, M., Hammel, J., Stevenson, P., Homberg, U., Mayer, G. (2022)
In: BMC Biology, Vol. 20, 1, 26. - journal articleSingle-exposure X-ray phase imaging microscopy with a grating interferometerWolf, A., Akstaller, B., Cipiccia, S., Flenner, S., Hagemann, J., Ludwig, V., Meyer, P., Schropp, A., Schuster, M., Seifert, M., Weule, M., Michel, T., Anton, G., Funk, S. (2022)
In: Journal of Synchrotron Radiation, Vol. 29, 3, 794-806. - journal articleEffects of Y Additions on the Microstructures and Mechanical Behaviours of as Cast Mg–xY–0.5Zr AlloysYou, S., Huang, Y., Dieringa, H., Maawad, E., Gan, W., Zhang, Y., Kainer, K., Willumeit-Römer, R., Hort, N. (2022)
In: Advanced Engineering Materials, Vol. 24, 4, 2101033. - journal articleTopological Analysis of the Experimental Electron Density in Multiferroic Antiferromagnet Ba2MnGe2O7Dutta, R., Thoma, H., Chernyshov, D., Nafradi, B., Masuda, T., Kriele, A., Hutanu, V. (2022)
In: IEEE Transactions on Magnetics, Vol. 58, 2, 2500206. - journal articleThe first fossils of the most basal pseudoscorpion family (Arachnida: Pseudoscorpiones: Pseudotyrannochthoniidae): evidence for major biogeographical shifts in the European paleofaunaSchwarze, D., Harms, D., Hammel, J., Kotthoff, U. (2022)
In: Paläontologische Zeitschrift, Vol. 96, 1, 11-27. - journal articleFunctionalized material production via multi-stack Upward Friction Stir Processing (UFSP)Inacio, P., Nogueira, F., Ferreira, F., Vidal, C., Schell, N., Tero, T., Vilaça, P., Oliveira, J., Santos, T. (2022)
In: Materials and Manufacturing Processes, Vol. 37, 1, 11-24. - journal articleDeformation and phase transformation behaviors of a high Nb-containing TiAl alloy compressed at intermediate temperaturesLiu, X., Song, L., Stark, A., Lorenz, U., He, Z., Lin, J., Pyczak, F., Zhang, T. (2022)
In: Journal of Materials Science & Technology, Vol. 102, 89-96. - journal articleFormation of plasma electrolytic oxidation coatings on pure niobium in different electrolytesWu, T., Blawert, C., Serdechnova, M., Karlova, P., Dovzhenko, G., Wieland, F., Stojadinovic, S., Vasilicd, R., Mojsilovic, K., Zheludkevich, M. (2022)
In: Applied Surface Science, Vol. 573, 151629. - journal articleFirst record of the spider family Hersiliidae (Araneae) from the Mesozoic of Europe (Bakony Mts, Hungary)Szabó, M., Hammel, J.U., Harms, D., Kotthoff, U., Bodor, E., Novák, J., Kovács, K., Ősi, A. (2022)
In: Cretaceous Research, Vol. 131, 105097. - journal articleMachine learning denoising of high-resolution X-ray nanotomography dataFlenner, S., Bruns, S., Longo, E., Parnell, A., Stockhausen, K., Müller, M., Greving, I. (2022)
In: Journal of Synchrotron Radiation, Vol. 29, 1, 230-238. - journal articleReflectometry with Polarized Neutrons on In Situ Grown Thin FilmsKreuzpaintner, W., Schmehl, A., Book, A., Mairoser, T., Ye, J., Wiedemann, B., Mayr, S., Moulin, J.-F., Stahn, J., Gilbert, D.A., Gabold, H., Inanloo-Maranloo, Z., Heigl, M., Masalovich, S., Georgii, R., Albrecht, M., Mannhart, J., Böni, P. (2022)
In: Physica Status Solidi B, Vol. 259, 5, 2100153. - journal articleNew aspects of globularization crystallography and dynamic phase evolution during thermomechanical processing of Ti–6Al–4V alloyCallegari, B., Oliveira, J.P., Coelho, R.S., Brito, P.P., Schell, N., Soldera, F., Mücklich, F., Pinto, H.C. (2022)
In: Materials Chemistry and Physics, Vol. 276, 125388. - journal articleInteraction of nanoparticles with lipid films: the role of symmetry and shape anisotropyCaselli, L., Ridolfi, A., Mangiapia, G., Maltoni, P., Moulin, J., Berti, D., Steinke, N., Gustafsson, E., Nylander, T., Montis, C. (2022)
In: Physical Chemistry Chemical Physics, Vol. 24, 5, 2762-2776. - journal articleIn situ microstructure analysis of Inconel 625 during laser powder bed fusionSchmeiser, F., Krohmer, E., Wagner, C., Schell, N., Uhlmann, E., Reimers, W. (2022)
In: Journal of Materials Science, Vol. 57, 21, 9663-9677. - journal articleCharacterization of primary, secondary and tertiary {202¯1}<1¯014> successive internal twins in the D019 ordered hexagonal α2-Ti3Al phaseSong, L., Appel, F., Pyczak, F., He, Z., Lin, J., Zhang, T. (2022)
In: Acta Materialia, Vol. 222, 117391. - journal articleSteel-copper functionally graded material produced by twin-wire and arc additive manufacturing (T-WAAM)Rodrigues, T.A., Bairrão, N., Farias, F.W.C., Shamsolhodaei, A., Shen, J., Zhou, N., Maawad, E., Schell, N., Santos, T.G., Oliveira, J.P. (2022)
In: Materials & Design, Vol. 213, 110270. - journal articleLocal structure mapping of gel-spun ultrahigh-molecular-weight polyethylene fibersHuss-Hansen, M., Hedlund, E., Davydok, A., Hansteen, M., Overdijk, J., de Cremer, G., Roeffaers, M., Knaapila, M., Balzano, L. (2022)
In: Polymer, Vol. 239, 124420. - journal articlePhase retrieval framework for direct reconstruction of the projected refractive index applied to ptychography and holographyWittwer, F., Hagemann, J., Brückner, D., Flenner, S., Schroer, C. (2022)
In: Optica, Vol. 9, 3, 295-302. - journal articleThe first fossil of the pseudoscorpion family Ideoroncidae (Arachnida: Pseudoscorpiones): A new taxon from the mid-Cretaceous of northern MyanmarGeißler, C., Kotthoff, U., Hammel, J., Harvey, M., Harms, D. (2022)
In: Cretaceous Research, Vol. 130, 105030. - journal articleIn-situ analysis of the thermoelastic effect and its relation to the onset of yielding of low carbon steelVitzthum, S., Rebelo Kornmeier, J., Hofmann, M., Gruber, M., Maawad, E., Batista, A.C., Hartmann, C., Volk, W. (2022)
In: Materials & Design, Vol. 219, 110753. - journal articlePEO processing of AZ91Nd/Al2O3 MMC-the role of alumina fibersWu, T., Blawert, C., Serdechnova, M., Karlova, P., Dovzhenko, G., Wieland, F., Zheludkevich, M. (2022)
In: Journal of Magnesium and Alloys, Vol. 10, 2, 423-439. - journal articleA previously unknown feeding mode in millipedes and the convergence of fluid feeding across arthropodsMoritz, L., Borisova, E., Hammel, J., Blanke, A., Wesener, T. (2022)
In: Science Advances, Vol. 8, 7, eabm0577. - journal articleEffect of the particle size evolution on the hydrogen storage performance of KH doped Mg(NH2)2 + 2LiHGizer, G., Karimi, F., Pistidda, C., Cao, H., Puszkiel, J., Shang, Y., Gericke, E., Hoell, A., Pranzas, K., Klassen, T., Dornheim, M. (2022)
In: Journal of Materials Science, Vol. 57, 22, 10028-10038. - journal articleImpact of asymmetry deformation on microstructure and mechanical properties of AZ31B alloy sheets deformed by on-line heating rollingXiao, B., Song, J., Zhao, H., Liu, Q., Gan, W., Guo, F., Jiang, B., Pan, F. (2022)
In: Progress in Natural Science: Materials International, Vol. 32, 1, 96-103. - journal articleLow temperature deformation mechanisms of polycrystalline CoZr and Co39Ni11Zr50 B2-type intermetallic compoundsSchaarschuch, R., Oertel, C.-G., Pukenas, A., Zhou, S., Cao, G., Freudenberger, J., Gan, W., Maawad, E., Chulist, R., Skrotzki, W. (2022)
In: Acta Materialia, Vol. 223, 117489. - journal articleIn Situ Coupling Applied Voltage and Synchrotron Radiation: Operando Characterization of TransistorsDavydok, A., Luponosov, Y.N., Ponomarenko, S.A., Grigorian, S. (2022)
In: Nanoscale Research Letters, Vol. 17, 1, 22. - journal articleTransformation textures in Ni rich NiTi shape memory alloyChaithanya Kumar, K.N., Pagare, A., Brokmeier, H.-G., Sankar, M., Schell, N., Suresh, K.S. (2022)
In: Materials Science and Engineering: A, Vol. 835, 142594. - journal articleStingless bees (Hymenoptera: Apidae) in Holocene copal and Defaunation resin from Eastern Africa indicate Recent biodiversity changeSolórzano-Kraemer, M.M., Kunz, R., Hammel, J.U., Peñalver, E., Delclòs, X., Engel, M.S. (2022)
In: The Holocene, Vol. 32, 5, 414-432. - journal articleThe first adult mantis lacewing from Baltic amber, with an evaluation of the post-Cretaceous loss of morphological diversity of raptorial appendages in MantispidaeBaranov, V., Pérez-de la Fuente, R., Engel, M., Hammel, J., Kiesmüller, C., Hörnig, M., Pazinato, P., Stahlecker, C., Haug, C., Haug, J. (2022)
In: Fossil Record, Vol. 25, 1, 11-24. - journal articlePhase transformations and phase stability in the Ti–44 at.%Al–(0–7 at.%)Mo systemMusi, M., Clemens, H., Stark, A., Staron, P., Spoerk-Erdely, P. (2022)
In: Intermetallics, Vol. 143, 107484. - journal articleFlexible Plenoptic X-ray MicroscopyLongo, E., Alj, D., Batenburg, J., de La Rochefoucauld, O., Herzog, C., Greving, I., Li, Y., Lyubomirskiy, M., Falch, K.V., Estrela, P., Flenner, S., Viganò, N., Fajardo, M., Zeitoun, P. (2022)
In: Photonics, Vol. 9, 2, 98. - journal articleDesigning the microstructural constituents of an additively manufactured near β Ti alloy for an enhanced mechanical and corrosion responseHariharan, A., Goldberg, P., Gustmann, T., Maawad, E., Pilz, S., Schell, F., Kunze, T., Zwahr, C., Gebert, A. (2022)
In: Materials & Design, Vol. 217, 110618. - journal articleQuantification of Residual Stress Relief by Heat Treatments in Austenitic Cladded LayersRebelo-Kornmeier, J., Marques, M.J., Gan, W., Batista, A.C., Paddea, S., Loureiro, A. (2022)
In: Materials, Vol. 15, 4, 1364. - journal articleFormation of lower bainite in a high carbon steel – an in-situ synchrotron XRD studyFoster, D., Paladugu, M., Hughes, J., Kapousidou, M., Islam, U., Stark, A., Schell, N., Jimenez-Melero, E. (2022)
In: Journal of Materials Research and Technology, Vol. 18, 5380-5393. - journal articleSurface Recrystallization in a Co-Based Superalloy During High Temperature ExposureLiang, Z., Lilleodden, E., Ovri, H., Pyczak, F. (2022)
In: Metallurgical and Materials Transactions A, Vol. 53, 12, 4156-4160. - journal articleIn-situ study of tensile deformation behaviour of medium Mn TWIP/TRIP steel using synchrotron radiationKalsar, R., Sanamar, S., Schell, N., Brokmeier, H.-G., Saha, R., Ghosh, P., Suwas, S. (2022)
In: Materials Science and Engineering: A, Vol. 857, 144013. - journal articleGenomic-Phenomic Reciprocal Illumination: Desyopone hereon gen. et sp. nov., an Exceptional Aneuretine-like Fossil Ant from Ethiopian Amber (Hymenoptera: Formicidae: Ponerinae)Boudinot, B.E., Richter, A.K., Hammel, J.U., Szwedo, J., Bojarski, B., Perrichot, V. (2022)
In: Insects, Vol. 13, 9, 796. - journal articleThe effect of zirconium on the Ti-(42-46 at.%)Al systemMusi, M., Kardos, S., Hatzenbichler, L., Holec, D., Stark, A., Allen, M., Güther, V., Clemens, H., Spoerk-Erdely, P. (2022)
In: Acta Materialia, Vol. 241, 118414. - journal articleRevision of recluse spiders (Araneae: Sicariidae: Loxosceles) preserved in Dominican amber and a total-evidence phylogeny of Scytodoidea reveal the first fossil DrymusidaeMagalhaes, I.L.F., Pérez-González, A., Labarque, F.M., Carboni, M., Hammel, J.U., Kunz, R., Ramírez, M.J., Solórzano-Kraemer, M.M. (2022)
In: Arthropod Systematics & Phylogeny, Vol. 80, 541-559. - journal articleInfluence of Tempering on Macro- and Micro-Residual Stresses and Yield Stress of Ferritic-Pearlitic Drawn, Coiled, and Straightened WiresLukas, M., Mayer, M., Stark, A., Friessnegger, B., Hönigmann, T., Galler, M., Ressel, G. (2022)
In: Metallurgical and Materials Transactions A, Vol. 53, 11, 3977-3985. - journal articlePrecipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin FilmsMeindlhumer, M., Ziegelwanger, T., Zalesak, J., Hans, M., Löfler, L., Spor, S., Jäger, N., Stark, A., Hruby, H., Daniel, R., Holec, D., Schneider, J.M., Mitterer, C., Keckes, J. (2022)
In: Acta Materialia, Vol. 237, 118156. - journal articleIn-situ x-ray phase contrast observation of the full penetration spot welding on limited aluminum material thicknessChung, W.-S., Häusler, A., Hummel, M., Olowinsky, A., Gillner, A., Beckmann, F., Moosmann, J. (2022)
In: Journal of Laser Applications, Vol. 34, 4, 042019. - journal articleA new fossil inchworm moth discovered in Miocene Dominican amber (Lepidoptera: Geometridae)Sarto i Monteys, V., Hausmann, A., Solórzano-Kraemer, M.M., Hammel, J.U., Baixeras, J., Delclòs, X., Peñalver, E. (2022)
In: Journal of South American Earth Sciences, Vol. 120, 104055. - journal articleEffects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloysLi, L., Wang, L., Liang, Z., He, J., Qiu, J., Pyczak, F., Song, M. (2022)
In: Materials & Design, Vol. 224, 111291. - journal articlePrecipitation Evolution in the Heat-Affected Zone and Coating Material of AA2024 Processed by Friction SurfacingEhrich, J., Staron, P., Karkar, A., Roos, A., Hanke, S. (2022)
In: Advanced Engineering Materials, Vol. 24, 11, 2201019. - journal articleDeveloping sustainable FeTi alloys for hydrogen storage by recyclingShang, Y., Liu, S., Liang, Z., Pyczak, F., Lei, Z., Heidenreich, T., Schökel, A., Kai, J.-J., Gizer, G., Dornheim, M., Klassen, T., Pistidda, C. (2022)
In: Communications Materials, Vol. 3, 1, 101. - journal articleIn Situ Synchrotron Radiation Diffraction Study of Compression of AZ91 Composites Reinforced with Recycled Carbon FibresMance, S., Dieringa, H., Bohlen, J., Gavras, S., Stark, A., Schell, N., Pereira da Silva, J., Tolnai, D. (2022)
In: Crystals, Vol. 12, 11, 1502. - journal articleDissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steelOliveira, J.P., Shen, J., Zeng, Z., Park, J.M., Choi, Y.T., Schell, N., Maawad, E., Zhou, N., Kim, H.S. (2022)
In: Scripta Materialia, Vol. 206, 114219. - journal articleMicrostructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metalShen, J., Goncalves, R., Choi, Y.T., Lopes, J.G., Yang, J., Schell, N., Kim, H.S., Oliveira, J.P. (2022)
In: Materials Science and Engineering: A, Vol. 857, 144025. - journal articleTexture Evolution During Hot Compression of CoCuFeMnNi Complex Concentrated Alloy Using Neutron Diffraction and Crystal Plasticity SimulationsSonkusare, R., Biswas, K., Gan, W., Brokmeier, H., Gurao, N. (2022)
In: Transactions of the Indian Institute of Metals, Vol. 75, 12, 3061-3066. - journal articleGas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloyShen, J., Agrawal, P., Rodrigues, T.A., Lopes, J.G., Schell, N., Zeng, Z., Mishhra, R.S., Oliveira, J.P. (2022)
In: Materials & Design, Vol. 223, 111176. - journal articleLocal microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steelPlatl, J., Bodner, S., Leitner, H., Turk, C., Nielsen, M.-A., Keckes, J., Schnitzer, R. (2022)
In: Materials Characterization, Vol. 193, 112318. - journal articleIn-situ analysis of the elastic-plastic characteristics of high strength dual-phase steelVitzthum, S., Rebelo Kornmeier, J., Hofmann, M., Gruber, M., Norz, R., Maawad, E., Mendiguren, J., Volk, W. (2022)
In: Materials Science and Engineering: A, Vol. 857, 144097. - journal articleInfluence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase AlloysHaußmann, L., Neumeier, S., Bresler, J., Keim, S., Pyczak, F., Göken, M. (2022)
In: Metals, Vol. 12, 5, 752. - journal articleMapping structure heterogeneities and visualizing moisture degradation of perovskite films with nano-focus WAXSLi, N., Pratap, S., Körstgens, V., Vema, S., Song, L., Liang, S., Davydok, A., Krywka, C., Müller-Buschbaum, P. (2022)
In: Nature Communications, Vol. 13, 6701. - journal articleWater flow through bone: Neutron tomography reveals differences in water permeability between osteocytic and anosteocytic bone materialSilveira, A., Kardjilov, N., Markötter, H., Longo, E., Greving, I., Lasch, P., Shahar, R., Zaslansky, P. (2022)
In: Materials & Design, Vol. 224, 111275. - journal articlePhase transformation induced by high pressure torsion in the high-entropy alloy CrMnFeCoNiChulist, R., Pukenas, A., Chekhonin, P., Hohenwarter, A., Pippan, R., Schell, N., Skrotzki, W. (2022)
In: Materials, Vol. 15, 23, 8407. - journal articleGraded Inconel-Stainless Steel Multi-Material Structure by Inter- and Intralayer Variation of Metal AlloysBodner, S.C., Hlushko, K., van de Vorst, L.T.G., Meindlhumer, M., Todt, J., Nielsen, M.A., Hooijmans, J.W., Saurwalt, J.J., Mirzaei, S., Keckes, J. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 21, 4846-4859. - journal articleThree-dimensional analyses of vascular network morphology in a murine lymph node by X-ray phase-contrast tomography with a 2D Talbot arraySchwarzenberg, F.L., Schütz, P., Hammel, J.U., Riedel, M., Bartl, J., Bordbari, S., Frank, S.C., Walkenfort, B., Busse, M., Herzen, J., Lohr, C., Wülfing, C., Henne, S. (2022)
In: Frontiers in Immunology, Vol. 13, 947961. - journal articlePhase transformation of the Ti-5553 titanium alloy subjected to rapid heatingChanfreau, N., Poquillon, D., Stark, A., Maawad, E., Mareau, C., Dehmas, M. (2022)
In: Journal of Materials Science, Vol. 57, 5620-5633. - journal articlePhase Equilibria in the Ti-Rich Part of the Ti-Al-Nb System—Part I: Low-Temperature Phase Equilibria Between 700 and 900 °CDistl, B., Hauschildt, K., Rashkova, R., Pyczak, F., Stein, F. (2022)
In: Journal of Phase Equilibria and Diffusion, Vol. 43, 355-381. - journal articlePhase Equilibria in the Ti-Rich Part of the Ti-Al-Nb System—Part II: High-Temperature Phase Equilibria Between 1000 and 1300 °CDistl, B., Hauschildt, K., Pyczak, F., Stein, F. (2022)
In: Journal of Phase Equilibria and Diffusion, Vol. 43, 554-575. - journal articleExperimental Investigation of Phase Equilibria in the Ti—Al—Zr System at 1000–1300 °CKahrobaee, Z., Rashkova, B., Hauschildt, K., Palm, M. (2022)
In: Crystals, Vol. 12, 9, 1184. - journal articleImproving the Young's modulus of Mg via alloying and compositing – A short reviewShi, H., Xu, C., Hu, X., Gan, W., Wu, K., Wang, X. (2022)
In: Journal of Magnesium and Alloys, Vol. 10, 8, 2009-2024. - journal articleThin-Copper-Layer-Induced Early Fracture in Graphene-Nanosheets (GNSs)-Reinforced Copper-Matrix-Laminated CompositesShi, H., Wang, X., Li, X., Hu, X., Gan, W., Xu, C., Wang, G. (2022)
In: Materials, Vol. 15, 21, 7677. - journal articleInvestigations of PMMCs laminates with regulatable thickness ratio: Microstructure, mechanical behavior and fractural mechanismLiu, Y., Deng, K.-K., Zhang, X.-C., Wang, C.-J., Nie, K.-B., Gan, W.-M., Shi, Q.-X. (2022)
In: Materials Science and Engineering: A, Vol. 856, 143997. - journal articleThe influence of in-situ alloying of electro-spark deposited coatings on the multiscale morphological and mechanical properties of laser welded Al–Si coated 22MnB5Shehryar Khan, M., Enrique, P., Ghatei-Kalashami, A., Lopes, J.G., Schell, N., Oliveira, J.P., Biro, E., Norman Zhou, Y. (2022)
In: Materials Science and Engineering: A, Vol. 839, 142830. - journal articleThe first fossil immature of Elmidae: an unusual riffle beetle larva preserved in Baltic amberZippel, A., Baranov, V.A., Hammel, J.U., Hörnig, M.K., Haug, C., Haug, J.T. (2022)
In: PeerJ, Vol. 10, e13025. - journal articleThermal stability of a cathodic arc evaporated Cr0.74Ta0.26N coatingKainz, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C., Pohler, M., Schalk, N. (2022)
In: Materialia, Vol. 22, 101434. - journal articleHeterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloyEscobar, J., Gwalni, B., Olszta, M., Silverstein, J., Ajantiwalay, T., Overman, N., Fu, W., Li, Y., Bergmann, L., Maawad, E., Klusemann, B., dos Santos, J., Devaraj, A. (2022)
In: Journal of Alloys and Compounds, Vol. 928, 167007. - journal articleCrack propagation in filled elastomers: 3D study of mechanisms involving the filler agglomeratesKallungal, J., Chazeau, L., Chenal, J.-M., Adrien, J., Maire, E., Barrès, C., Cantaloube, B., Heuillet, P., Wilde, F., Moosmann, J., Weitkamp, T. (2022)
In: Engineering Fracture Mechanics, Vol. 274, 108771. - journal articleAtomic site occupancy of alloying elements and Laves phase stability in γ-γ′ Co-base superalloysWang, L., Kong, Y., Oehring, M., Song, M., Pyczak, F. (2022)
In: Journal of Alloys and Compounds, Vol. 906, 164261. - journal articleAssessing the fracture and fatigue resistance of nanostructured thin filmsZauner, L., Hahn, R., Aschauer, E., Wojcik, T., Davydok, A., Hunold, O., Polcik, P., Riedl, H. (2022)
In: Acta Materialia, Vol. 239, 118260. - journal articleCreep resistance improvement of a polycrystalline Ni-based superalloy via TiC particles reinforcementLemos, G., Fredel, M.C., Pyczak, F., Tetzlaff, U. (2022)
In: Materials Science and Engineering: A, Vol. 854, 143821. - journal articleAssessing the long-term in vivo degradation behavior of magnesium alloys - a high resolution synchrotron radiation micro computed tomography studySefa, S., Wieland, F., Helmholz, H., Zeller-Plumhoff, B., Wennerberg, A., Moosmann, J., Willumeit-Römer, R., Galli, S. (2022)
In: Frontiers in Biomaterials Science, Vol. 1, 925471. - journal articleAutomatic melt pool recognition in X-ray radiography images from laser-molten Al alloyNielsen, M., Gloy, J., Lott, D., Sun, T., Müller, M., Staron, P. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 21, 3502-3513. - journal articlePore formation and melt pool analysis of laser welded Al-Cu joints using synchrotron radiationHollatz, S., Hummel, M., Olowinsky, A., Gillner, A., Beckmann, F., Moosmann, J. (2022)
In: Journal of Materials Processing Technology, Vol. 309, 117738. - journal articleOn the impact of nanometric γ’ precipitates on the tensile deformation of superelastic Co49Ni21Ga30Reul, A., Lauhoff, C., Krooß, P., Somsen, C., Langenkämper, D., Gutmann, M.J., Pedersen, B., Hofmann, M., Gan, W.M., Kireeva, I., Chumlyakov, Y.I., Eggeler, G., Niendorf, T., Schmahl, W.W. (2022)
In: Acta Materialia, Vol. 230, 117835. - journal articlePolymeric Nanocapsules from Well-Defined Zwitanionic Vesicles as a TemplateYalcinkaya, H., Mangiapia, G., Appavou, M.-S., Hoffmann, I., Gradzielski, M. (2022)
In: Macromolecules, Vol. 55, 17, 7869-7878. - journal articleIn-situ synchrotron X-ray analysis of metal Additive Manufacturing: Current state, opportunities and challengesIoannidou, C., König, H.-H., Semjatov, N., Ackelid, U., Staron, P., Körner, C., Hedström, P., Lindwall, G. (2022)
In: Materials & Design, Vol. 219, 110790. - journal articleCombining hardness measurements of a heat-treated crankshaft bearing with cross-sectional residual stress and retained austenite distributions measured by HEXRDMevec, D.G., Jászfi, V., Prevedel, P., Todt, J., Maawad, E., Keckes, J., Raninger, P. (2022)
In: Materials Today Communications, Vol. 33, 104267. - journal articleWire and arc additive manufacturing of 316L stainless steel/Inconel 625 functionally graded material: development and characterizationRodrigues, T., Farias, F., Zhang, K., Shamsolhodaei, A., Shen, J., Zhou, N., Schell, N., Capek, J., Polatidis, E., Santos, T., Oliveira, J. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 21, 237-251. - journal articleStudy of solid state transformations and their effect on mechanical response in the stoichiometric Ni2Cr using in-situ synchrotron radiation diffraction experimentsMedina, J., Pérez, P., Vega, M.F., Garces, G., Maawad, E., Schell, N., Adeva, P. (2022)
In: Materials Characterization, Vol. 193, 112279. - journal articleEffect of Mo on Phase Stability and Properties in FeMnNiCo High-Entropy AlloysCichocki, K., Bała, P., Kozieł, T., Cios, G., Schell, N., Muszka, K. (2022)
In: Metallurgical and Materials Transactions A, Vol. 53, 5, 1749-1760. - journal articleHow Si affects the microstructural evolution and phase transformations of intermetallic γ-TiAl based alloysMusi, M., Galy, B., Stark, A., Schell, N., Hantcherli, M., Monchoux, J.-P., Couret, A., Clemens, H., Spoerk-Erdely, P. (2022)
In: Materialia, Vol. 24, 101475. - journal articleApplication of X-ray Microcomputed Tomography for the Static and Dynamic Characterization of the Microstructure of OleofoamsMetilli, L., Storm, M., Marathe, S., Lazidis, A., Marty-Terrade, S., Simone, E. (2022)
In: Langmuir, Vol. 38, 4, 1638-1650.
Zur Publikation2021
- journal articleCorrelative cross-sectional characterization of nitrided, carburized and shot-peened steels: synchrotron micro-X-ray diffraction analysis of stress, microstructure and phase gradientsBodner, S., Meindlhumer, M., Ziegelwanger, T., Winklmayr, H., Hatzenbichler, T., Schindelbacher, C., Sartory, B., Krobath, M., Ecker, W., Schell, N., Keckes, J. (2021)
In: Journal of Materials Research and Technology : JMRT, Vol. 11, 1396-1410. - journal articleInfluence of the amount of intermetallics on the degradation of Mg-Nd alloys under physiological conditionsZhang, Y., Huang, Y., Feyerabend, F., Blawert, C., Gan, W., Maawad, E., You, S., Gavras, S., Scharnagl, N., Bode, J., Vogt, C., Zander, D., Willumeit-Römer, R., Kainer, K., Hort, N. (2021)
In: Acta Biomaterialia, Vol. 121, 695-712. - journal articleNew Insights into the Intermartensitic Transformation and Over 11% Magnetic Field-Induced Strain in 14 m Ni−Mn−Ga MartensiteChulist, R., Pagounis, E., Czaja, P., Schell, N., Brokmeier, H. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100131. - journal articleIn situ synchrotron X-ray diffraction study of continuous cooling transformations of TIMETAL 54MMaawad, E., Stark, A. (2021)
In: Journal of Alloys and Compounds, Vol. 881, 160602. - journal articleWire and Arc Additive Manufacturing of High-Strength Low-Alloy Steel: Microstructure and Mechanical PropertiesDuarte, V., Rodrigues, T., Schell, N., Oliveira, J., Miranda, R. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 20010036. - journal articleMicrostructure and lattice parameters of suction-cast Ti–Nb alloys in a wide range of Nb concentrationsThoemmes, A., Bataev, I.A., Lazurenko, D.V., Ruktuev, A.A., Ivanov, I.V., Afonso, C.R.M., Stark, A., Jorge, A.M., Jr. (2021)
In: Materials Science and Engineering: A, Vol. 818, 141378. - journal articleCreep-induced ωo phase precipitation and cavity formation in a cast 45.5Ti-45Al-9Nb-0.5B alloyLiu, X., Song, L., Stark, A., Lazurenko, D., Pyczak, F., Zhang, T. (2021)
In: Journal of Alloys and Compounds, Vol. 875, 160106. - journal articleIn situ synchrotron X-ray diffraction study of reaction routes in Ti-Al3Ti-based composites: The effect of transition metals on L12 structure stabilizationLazurenko, D.V., Lozanov, V.V., Stark, A., Pyczak, F., Ruktuev, A.A., Emurlaev, K.I., Song, L., Bataev, I.A., Ivanov, I.V., Ogneva, T.S., Bataev, A.A. (2021)
In: Journal of Alloys and Compounds, Vol. 875, 160004. - journal articleDeformation-induced martensitic transformation in Co-28Cr-6Mo alloy produced by laser powder bed fusion: Comparison surface vs. bulkAntunes, L.H.M., Hoyos, J.J., Andrade, T.C., Sarvezuk, P.W.C., Wu, L., Ávila, J.A., Oliveira, J.P., Schell, N., Jardini, A.L., Žilková, J., da Silva Farina, P.F., Abreu, H.F.G., Béreš, M. (2021)
In: Additive Manufacturing, Vol. 46, 102100. - journal articleMulti-scale phase analyses of strain-induced martensite in austempered ductile iron (ADI) using neutron diffraction and transmission techniquesLi, X., Soria, S., Gan, W., Hofmann, M., Schulz, M., Hoelzel, M., Brokmeier, H.-G., Petry, W. (2021)
In: Journal of Materials Science, Vol. 56, 5296-5306. - journal articleComparison of a low carbon steel processed by Cold Rolling (CR) and Asymmetrical Rolling (ASR): Heterogeneity in strain path, texture, microstructure and mechanical propertiesMuñoz, J.A., Avalos, M., Schell, N., Brokmeier, H.G., Bolmaro, R.E. (2021)
In: Journal of Manufacturing Processes, Vol. 64, 557-575. - journal articleIn Situ Observation of γ′ Phase Transformation Dynamics During Selective Laser Melting of CMSX-4Wahlmann, B., Krohmer, E., Breuning, C., Schell, N., Staron, P., Uhlmann, E., Körner, C. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100112. - journal articleIn Situ High-Energy Synchrotron X-Ray Diffraction Reveals the Role of Texture on the Activation of Slip and Twinning during Deformation of Laser Powder Bed Fusion Ti–6Al–4VVallejos, J., Barriobero-Vila, P., Gussone, J., Haubrich, J., Kelm, K., Stark, A., Schell, N., Requena, G. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2001556. - journal articleEffect of laser heating on mechanical properties, residual stresses and retardation of fatigue crack growth in AA2024Kashaev, N., Groth, A., Ventzke, V., Horstmann, M., Riekehr, S., Staron, P., Huber, N. (2021)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 44, 4, 887-900. - journal articleReal-time stress evolution during laser surface line hardening at varying maximum surface temperatures using synchrotron X-ray diffractionKiefer, D., Simon, N., Beckmann, F., Wilde, F., Gibmeier, J. (2021)
In: Optics and Laser Technology, Vol. 140, 106964. - journal articleIntegrative anatomical study of the branched annelid Ramisyllis multicaudata (Annelida, Syllidae)Ponz-Segrelles, G., Glasby, C., Helm, C., Beckers, P., Hammel, J., Ribeiro, R., Aguado, M. (2021)
In: Journal of Morphology, Vol. 282, 6, 900-916. - journal articleMovement analysis of primate molar teeth under load using synchrotron X-ray microtomographyBemmann, M., Schulz-Kornas, E., Hammel, J., Hipp, A., Moosmann, J., Herrel, A., Rack, A., Radespiel, U., Zimmermann, E., Kaiser, T., Kupczik, K. (2021)
In: Journal of Structural Biology, Vol. 213, 1, 107658. - journal articleTexture-Based Optimization of Crystal Plasticity Parameters: Application to Zinc and Its AlloyFrydrych, K., Jarzebska, A., Virupakshi, S., Kowalczyk-Gajewska, K., Bieda, M., Chulist, R., Pachla, W., Schell, N., Sztwiertnia, K. (2021)
In: Metallurgical and Materials Transactions A, Vol. 52, 8, 3257-3273. - journal articleRevealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steelFu, B., Shen, J., Suhuddin, U., Pereira, A., Maawad, E., dos Santos, J., Klusemann, B., Rethmeier, M. (2021)
In: Materials & Design, Vol. 209, 109997. - journal articleSynthesis of bulk reactive Ni–Al composites using high pressure torsionRenk, O., Tkadletz, M., Kostoglou, N., Gunduz, I., Fezzaa, K., Sun, T., Stark, A., Doumanidis, C., Eckert, J., Pippan, R., Mitterer, C., Rebholz, C. (2021)
In: Journal of Alloys and Compounds, Vol. 857, 157503. - journal articleMutually Beneficial Combination of Molecular Dynamics Computer Simulations and Scattering ExperimentsZec, N., Mangiapia, G., Hendry, A.C., Barker, R., Koutsioubas, A., Frielinghaus, H., Campana, M., Ortega-Roldan, J.L., Busch, S., Moulin, J. (2021)
In: Membranes, Vol. 11, 7, 507. - journal articleAdsorption-induced deformation of hierarchical organised carbon materials with ordered; non-convex mesoporosityLudescher, L., Morak, R., Braxmeier, S., Balzer, C., Putz, F., Busch, S., Hüsing, N., Reichenauer, G., Gor, G., Paris, O. (2021)
In: Molecular Physics, Vol. 119, 15-16, e1894362. - journal articleThe tracheal system of scutigeromorph centipedes and the evolution of respiratory systems of myriapodsHilken, G., Rosenberg, J., Edgecombe, G., Blüml, V., Hammel, J., Hasenberg, A., Sombke, A. (2021)
In: Arthropod Structure & Development, Vol. 60, 101006. - journal articleDegradation Analysis of Thin Mg-xAg Wires Using X-ray Near-Field HolotomographyMeyer, S., Wolf, A., Sanders, D., Iskhakova, K., Ćwieka, H., Bruns, S., Flenner, S., Greving, I., Hagemann, J., Willumeit-Römer, R., Wiese, B., Zeller-Plumhoff, B. (2021)
In: Metals, Vol. 11, 9, 1422. - journal articleEvaporation kinetics in highly porous tetrapodal zinc oxide networks studied using in situ SRµCTHindenlang, B., Gapeeva, A., Baum, M., Kaps, S., Saure, L., Rasch, F., Hammel, J., Moosmann, J., Storm, M., Adelung, R., Schütt, F., Zeller-Plumhoff, B. (2021)
In: Scientific Reports, Vol. 11, 1, 20272. - journal articleSuperior fatigue endurance exempt from high processing cleanliness of Metal-Injection-Molded β Ti-Nb-Zr for bio-tolerant applicationsXu, P., Pyczak, F., Limberg, W., Willumeit-Römer, R., Ebel, T. (2021)
In: Materials & Design, Vol. 211, 110141. - journal articleOn the prediction of fatigue crack growth based on weight functions in residual stress fields induced by laser shock peening and laser heatingKashaev, N., Keller, S., Staron, P., Maawad, E., Huber, N. (2021)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 44, 12, 3463-3481. - journal articleA comprehensive study on lithium-based reactive hydride composite (Li-RHC) as a reversible solid-state hydrogen storage system toward potential mobile applicationsKarimi, F., Pranzas, K., Puszkiel, J., Castro Riglos, V., Milanese, C., Vainio, U., Pistidda, C., Gizer, G., Klassen, T., Schreyer, A., Dornheim, M. (2021)
In: RSC Advances, Vol. 11, 37, 23122-23135. - journal articleMultimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloyEscobar, J., Gwalani, B., Olszta, M., Silverstein, J., Overman, N., Bergmann, L., dos Santos, J.F., Staron, P., Maawad, E., Klusemann, B., Mathaudhu, S., Devaraj, A. (2021)
In: Journal of Alloys and Compounds, Vol. 887, 161351. - journal articleComing together – symbiont acquisition and early development in deep-sea bathymodioline musselsFranke, M., Geier, B., Hammel, J., Dubilier, N., Leisch, N. (2021)
In: Proceedings of the Royal Society B, Vol. 288, 1957, 20211044. - journal articleIn Situ Synchrotron Tomography of the Solidification of an Elektron 21 Mg AlloyTolnai, D., Gavras, S., Wilde, F., Hammel, J., Bruns, S. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100383. - journal articleTEM and Synchrotron X-ray Study of the Evolution of Phases Formed During Bonding of IN718/Al/IN718 Couples by TLPBPoliserpi, M., Barriobero-Vila, P., Requena, G., García, L.N., Tolley, A., Poletti, C., Vojtek, T., Weiser, A., Schell, N., Stark, A., Boeri, R., Sommadossi, S. (2021)
In: Metallurgical and Materials Transactions A, Vol. 52, 4, 1382-1394. - journal articleHigh Hydrogen Mobility in an Amide–Borohydride Compound Studied by Quasielastic Neutron ScatteringAslan, N., Gizer, G., Pistidda, C., Dornheim, M., Müller, M., Busch, S., Lohstroh, W. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100620. - journal articleAn In Situ High-Energy Synchrotron X-Ray Diffraction Study of Directional Solidification in Binary TiAl AlloysOehring, M., Matthiessen, D., Blankenburg, M., Schell, N., Pyczak, F. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100151. - journal articleCharacterization of LiBH4–MgH2 Reactive Hydride Composite System with Scattering and Imaging Methods Using Neutron and Synchrotron RadiationKarimi, F., Börris, S., Pranzas, P., Metz, O., Hoell, A., Gizer, G., Puszkiel, J., Riglos, M., Pistidda, C., Dornheim, M., Klassen, T., Schreyer, A. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100294. - journal articleScreening for O phase in advanced γ–TiAl alloysRackel, M., Stark, A., Gabrisch, H., Pyczak, F. (2021)
In: Intermetallics, Vol. 131, 107086. - journal articleGrain Boundary Formation Through Particle Detachment During Coarsening of Nanoporous MetalsElder, K.L.M., Beck Andrews, W., Ziehmer, M., Mameka, N., Kirchlechner, C., Davydok, A., Micha, J.-S., Chadwick, A.F., Lilleodden, E.T., Thornton, K., Voorhees, P.W. (2021)
In: Proceedings of the National Academy of Sciences of the United States of America: PNAS, Vol. 118, 30, e2104132118. - journal articleCapillarity and active cell movement at mesendoderm translocation in the Xenopus gastrulaNagel, M., Barua, D., Damm, E., Kashef, J., Hofmann, R., Ershov, A., Cecilia, A., Moosmann, J., Baumbach, T., Winklbauer, R. (2021)
In: Development, Vol. 148, 18, dev198960. - journal articleUsing In Situ Synchrotron-Radiation-Based Microtomography to Investigate 3D Structure-Dependent Material Properties of Tension WoodSchmelzle, S., Bruns, S., Beckmann, F., Moosmann, J., Lautner, S. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100235. - journal articleGaining Insight into the Deformation of Achilles Tendon Entheses in MiceSartori, J., Köhring, S., Bruns, S., Moosmann, J., Hammel, J. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100085. - journal articleThe Effect of Chemistry and 3D Microstructural Architecture on Corrosion of Biodegradable Mg–Ca–Zn AlloysZander, D., Zaslansky, P., Zumdick, N., Feldten, M., Schnatterer, C., Chaineux, V., Hammel, J., Storm, M., Wilde, F., Fleck, C. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100157. - journal articleJuvenile ecology drives adult morphology in two insect ordersRühr, P., van de Kamp, T., Farago, T., Hammel, J., Wilde, F., Borisova, E., Edel, C., Frenzel, M., Baumbach, T., Blanke, A. (2021)
In: Proceedings of the Royal Society B, Vol. 288, 1953, 20210616. - journal articleCompetition of mechanisms contributing to the texture formation in metastable austenitic steel under compressive loadUllrich, C., Martin, S., Schimpf, C., Brokmeier, H., Schell, N., Stark, A., Rafaja, D. (2021)
In: Materials Characterization, Vol. 176, 111132. - journal articleMicrostructure and mechanical behavior of Mg-5Zn matrix influenced by particle deformation zoneShi, Q., Wang, C., Deng, K., Nie, K., Wu, Y., Gan, W., Liang, W. (2021)
In: Journal of Materials Science & Technology, Vol. 60, 8-20. - journal articleLoad Partitioning Between Mg17Al12 Precipitates and Mg Phase in the AZ91 Alloy Using In-Situ Synchrotron Radiation Diffraction ExperimentsGarces, G., Medina, J., Chavez, B., Perez, P., Barea, R., Schell, N., Stark, A., Adeva, P. (2021)
In: Metallurgical and Materials Transactions A, Vol. 52, 7, 2732-2745. - journal articleElectrochemical Surface Structuring for Strong SMA Wire–Polymer Interface AdhesionGapeeva, A., Vogtmann, J., Zeller-Plumhoff, B., Beckmann, F., Gurka, M., Carstensen, J., Adelung, R. (2021)
In: ACS Applied Materials and Interfaces, Vol. 13, 18, 21924-21935. - journal articleInterfacial Reactions in the Bonding Zones of Explosively Welded Tantalum to Stainless Steel SheetsPaul, H., Chulist, R., Mania, I., Schell, N., Lityńska-Dobrzyńska, L. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2001521. - journal articlePhenomenological analysis of constrained in-plane compression of paperboard using micro-computed tomography ImagingWallmeier, M., Barbier, C., Beckmann, F., Brandberg, A., Holmqvist, C., Kulachenko, A., Moosmann, J., Östlund, S., Pettersson, T. (2021)
In: Nordic Pulp & Paper Research Journal, Vol. 36, 3, 491-502. - journal articleIn-Situ Investigation of the Oxidation Behaviour of Chemical Vapour Deposited Zr(C,N) Hard Coatings Using Synchrotron X-ray DiffractionFrank, F., Tkadletz, M., Saringer, C., Stark, A., Schell, N., Deluca, M., Czettl, C., Schalk, N. (2021)
In: Coatings, Vol. 11, 3, 264. - journal articleStructural changes and pseudo-piezoelectric behaviour of field assisted sintered calcium titanateRiaz, A., Witte, K., Bodnar, W., Hantusch, M., Schell, N., Springer, A., Burkel, E. (2021)
In: Materialia, Vol. 15, 100998. - journal articleLaser welding of H-phase strengthened Ni-rich NiTi-20Zr high temperature shape memory alloyOliveira, J., Shen, J., Escobar, J., Salvador, C., Schell, N., Zhou, N., Benafan, O. (2021)
In: Materials & Design, Vol. 202, 109533. - journal articleInsight into physical interpretation of high frequency time constant in electrochemical impedance spectra of MgWang, L., Snihirova, D., Deng, M., Wang, C., Vaghefinazari, B., Wiese, G., Langridge, M., Höche, D., Lamaka, S., Zheludkevich, M. (2021)
In: Corrosion Science, Vol. 187, 109501. - journal articleA Unique Quenching and Deformation Dilatometer for Combined In Situ Neutron Diffraction Analysis of Engineering MaterialsLi, X., Hofmann, M., Landesberger, M., Reiberg, M., Zhang, X., Huang, Y., Wang, L., Werner, E., Gan, W. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100163. - journal articleSuperelasticity preservation in dissimilar joint of NiTi shape memory alloy to biomedical PtIrShamsolhodaei, A., Oliveira, J., Panton, B., Ballesteros, B., Schell, N., Zhou, Y. (2021)
In: Materialia, Vol. 16, 101090. - journal articleEvaluating the morphology of the degradation layer of pure magnesium via 3D imaging at resolutions below 40 nmZeller-Plumhoff, B., Laipple, D., Slominska, H., Iskhakova, K., Longo, E., Hermann, A., Flenner, S., Greving, I., Storm, M., Willumeit-Römer, R. (2021)
In: Bioactive Materials, Vol. 6, 12, 4368-4376. - journal articleMechanism of LDH Direct Growth on Aluminum Alloy Surface: A Kinetic and Morphological ApproachBouali, A., Iuzviuk, M., Serdechnova, M., Yasakau, K., Drozdenko, D., Lutz, A., Fekete, K., Dovzhenko, G., Wieland, F., Terryn, H., Ferreira, M., Zobkalo, I., Zheludkevich, M. (2021)
In: The Journal of Physical Chemistry C, Vol. 125, 21, 11687-11701. - journal articleMicrostructural influence of the thermal behavior of arc deposited TiAlN coatings with high aluminum contentChaar, A., Rogström, L., Johansson-Jöesaar, M., Barrirero, J., Aboulfadl, H., Schell, N., Ostach, D., Mücklich, F., Oden, M. (2021)
In: Journal of Alloys and Compounds, Vol. 854, 157205. - journal articleIn situ Observation of Ternary Eutectic Growth in a Directionally Solidified Mo–Si–B Alloy Using High-Energy Synchrotron X-RaysHasemann, G., Zhu, L., Hauschildt, K., Blankenburg, M., Ida, S., Pyczak, F., Yoshimi, K., Krüger, M. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100111. - journal articlePartitioning Behavior of Nb, Ta, and Zr in Fully Lamellar γ/α2 Titanium Aluminides and Its Effect on the Lattice Misfit and Creep BehaviorNeumeier, S., Bresler, J., Zenk, C., Haussmann, L., Stark, A., Pyczak, F., Göken, M. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100156. - journal articleInfluence of partitioning parameters on the mechanical stability of austenite in a Q&P steel: A comparative in-situ studyEbner, S., Schnitzer, R., Maawad, E., Suppan, C., Hofer, C. (2021)
In: Materialia, Vol. 15, 101033. - journal articleLattice strain during compressive loading of AlCrFeNiTi multi-principal element alloysReiberg, M., Li, X., Maawad, E., Werner, E. (2021)
In: Continuum Mechanics and Thermodynamics, Vol. 33, 4, 1541-1554. - journal articleDeformation Behavior of Cross-Linked Supercrystalline Nanocomposites: An in Situ SAXS/WAXS Study during Uniaxial CompressionGiuntini, D., Davydok, A., Blankenburg, M., Domènech, B., Bor, B., Li, M., Scheider, I., Krywka, C., Müller, M., Schneider, G. (2021)
In: Nano Letters, Vol. 21, 7, 2891-2897. - journal articleDiscovery of Lebambromyia in Myanmar Cretaceous Amber: Phylogenetic and Biogeographic Implications (Insecta, Diptera, Phoroidea)Badano, D., Zhang, Q., Fratini, M., Maugeri, L., Bukreeva, I., Longo, E., Wilde, F., Yeates, D., Cerretti, P. (2021)
In: Insects, Vol. 12, 4, 354. - journal articlePropagation-Based Phase Contrast Computed Tomography as a Suitable Tool for the Characterization of Spatial 3D Cell Distribution in BiomaterialsWieland, D., Krueger, S., Moosmann, J., Distler, T., Weizel, A., Boccaccini, A., Seitz, H., Jonitz-Heincke, A., Bader, R. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2001188. - journal articleCollagen Fiber Orientation Is Coupled with Specific Nano-Compositional Patterns in Dark and Bright Osteons Modulating Their Biomechanical PropertiesStockhausen, K., Qwamizadeh, M., Wölfel, E., Hemmatian, H., Fiedler, I., Flenner, S., Longo, E., Amling, M., Greving, I., Ritchie, R., Schmidt, F., Busse, B. (2021)
In: ACS Nano, Vol. 15, 1, 455-467. - journal articleSuppression and Recovery of Martensitic Transformation and Magnetism in Mechanically and Thermally Treated Magnetic Shape-Memory Ni−Mn−Ga Melt-Spun RibbonsCzaja, P., Chulist, R., Wojcik, A., Kowalczyk, M., Zackiewicz, P., Szewczyk, A., Schell, N., Maziarz, W. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100075. - journal articleProfiling cellular diversity in sponges informs animal cell type and nervous system evolutionMusser, J.M., Schippers, K.J., Nickel, M., Mizzon, G., Kohn, A.B., Pape, C., Ronchi, P., Papadopoulos, N., Tarashansky, A.J., Hammel, J.U., Wolf, F., Liang, C., Hernández-Plaza, A., Cantalapiedra, C.P., Achim, K., Schieber, N.L., Pan, L., Ruperti, F., Francis, W.R., Vargas, S., Kling, S., Renkert, M., Polikarpov, M., Bourenkov, G., Feuda, R., Gaspar, I., Burkhardt, P., Wang, B., Bork, P., Beck, M., Schneider, T.R., Kreshuk, A., Wörheide, G., Huerta-Cepas, J., Schwab, Y., Moroz, L.L., Arendt, D. (2021)
In: Science, Vol. 374, 6568, 717-723. - journal articleTunable Pseudo-Piezoelectric Effect in Doped Calcium Titanate for Bone Tissue EngineeringRiaz, A., Witte, K., Bodnar, W., Seitz, H., Schell, N., Springer, A., Burkel, E. (2021)
In: Materials, Vol. 14, 6, 1495. - journal articleThree-dimensional imaging of xylem at cell wall level through near field nano holotomographyKoddenberg, T., Greving, I., Hagemann, J., Flenner, S., Krause, A., Laipple, D., Klein, K.C., Schmitt, U., Schuster, M., Wolf, A., Seifert, M., Ludwig, V., Funk, S., Militz, H., Nopens, M. (2021)
In: Scientific Reports, Vol. 11, 1, 4574. - journal articlePowder diffraction computed tomography: a combined synchrotron and neutron studyKochetov, V., Mühlbauer, M., Schökel, A., Fischer, T., Müller, T., Hofmann, M., Staron, P., Lienert, U., Petry, W., Senyshyn, A. (2021)
In: Journal of Physics: Condensed Matter, Vol. 33, 10, 105901. - journal articleThermal expansion of a multiphase intermetallic Ti-Al-Nb-Mo alloy studied by high-energy X-ray diffractionStaron, P., Stark, A., Schell, N., Spoerk-Erdely, P., Clemens, H. (2021)
In: Materials, Vol. 14, 4, 727. - journal articleEstimation of sinking velocity using free-falling dynamically scaled models: Foraminifera as a test caseWalker, M., Hammel, J., Wilde, F., Hoehfurtner, T., Humphries, S., Schuech, R. (2021)
In: The Journal of Experimental Biology, Vol. 224, 2, jeb230961. - journal articleModeling precipitation kinetics for multi-phase and multi-component systems using particle size distributions via a moving grid techniqueHerrnring, J., Sundman, B., Staron, P., Klusemann, B. (2021)
In: Acta Materialia, Vol. 215, 117053. - journal articleTaC Precipitation Kinetics During Cooling of Co−Re-Based AlloysKarge, L., Gilles, R., Hofmann, M., Mukherji, D., Rösler, J., Honecker, D., Beran, P., Strunz, P., Schell, N., Busch, S. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100129. - journal articleAnomalies in the vertebral column and ilio-sacral articulation of some anuran amphibiansHaas, A., Schwippert, S., Büsse, S., Kleinteich, T., Beerlink, A., Hammel, J., Gorb, S., Engelkes, K. (2021)
In: Salamandra, Vol. 57, 1, 53-64. - journal articleMicrostructure and mechanical properties of M40/AZ91 composites fabricated by pressure infiltration methodSun, Z., Hu, X., Wang, X., Wu, K., Gan, W. (2021)
In: Composites Communications, Vol. 24, 100640. - journal articleThe second chthonioid pseudoscorpion (Pseudoscorpiones: Chthoniidae) from mid-Cretaceous Burmese amber: a new genus with unique morphological features and potential Gondwanan affinitiesWriedt, A., Harvey, M., Hammel, J., Kotthof, U., Harms, D. (2021)
In: The Journal of Arachnology, Vol. 48, 3, 311-321. - journal articleEvolutionary morphology of the antennal heart in stick and leaf insects (Phasmatodea) and webspinners (Embioptera) (Insecta: Eukinolabia)Wipfler, B., Bradler, S., Büsse, S., Hammel, J., Müller, B., Pass, G. (2021)
In: Zoomorphology, Vol. 140, 3, 331-340. - journal articleParallel evolution of direct development in frogs ‐ Skin and thyroid gland development in African Squeaker Frogs (Anura: Arthroleptidae: Arthroleptis)Naumann, B., Schweiger, S., Hammel, J., Müller, H. (2021)
In: Developmental Dynamics, Vol. 250, 4, 584-600. - journal articleLocal Strain Distribution in ZnO Microstructures Visualized with Scanning Nano X-Ray Diffraction and Impact on Electrical PropertiesJordt, P., Hrkac, S., Gröttrup, J., Davydok, A., Krywka, C., Wolff, N., Kienle, L., Adelung, R., Magnussen, O., Murphy, B. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100201. - journal article3D Spatial Distribution of Nanoparticles in Mice Brain Metastases by X-ray Phase-Contrast TomographyLongo, E., Sancey L., Cedola, A., Barbier, E., Bravin, A., Brun, F., Bukreeva, I., Fratini, M., Massimi, L., Greving, I., Le Duc, G., Tillement, O., De La Rochefoucauld, O., Zeitoun P. (2021)
In: Frontiers in Oncology, Vol. 11, 554668. - journal articleUtilizing Synchrotron Radiation for the Characterization of Biodegradable Magnesium Alloys—From Alloy Development to the Application as Implant MaterialZeller-Plumhoff, B., Tolnai, D., Wolff, M., Greving, I., Hort, N., Willumeit-Römer, R. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100197. - journal articleTube Drawing with Tilted Die: Texture, Dislocation Density and Mechanical PropertiesAl-Hamdany, N., Salih, M., Palkowski, H., Carradò, A., Gan, W., Schell, N., Brokmeier, H. (2021)
In: Metals, Vol. 11, 4, 638. - journal articleThe Influence of In Situ Anatase Particle Addition on the Formation and Properties of Multifunctional Plasma Electrolytic Oxidation Coatings on AA2024 Aluminum AlloyIgnjatovic, S., Blawert, C., Serdechnova, M., Karpushenkov, S., Damjanovic, M., Karlova, P., Dovzhenko, G., Wieland, F., Zeller-Plumhoff, B., Starykevich, M., Stojanovic, S., Damjanovic-Vasilic, L., Zheludkevich, M. (2021)
In: Advanced Engineering Materials, Vol. 23, 6, 2001527. - journal articleSynchrotron-radiation computed tomography uncovers ecosystem functions of fly larvae in an Eocene forestBaranov, V., Engel, M., Hammel, J., Hörnig, M., van de Kamp, T., Zuber, M., Haug, J. (2021)
In: Palaeontologia Electronica, Vol. 24, 1, a07. - journal articleFirst steps toward suctorial feeding in millipedes: Comparative morphology of the head of the Platydesmida (Diplopoda: Colobognatha)Moritz, L., Blanke, A., Hammel, J., Wesener, T. (2021)
In: Invertebrate Biology, Vol. 140, 2, e12312. - journal articleEstimation of sinking velocity using free-falling dynamically scaled models: Foraminifera as a test caseWalker, M., Hammel, J., Wilde, F., Hoehfurtner, T., Humphries, S., Schuech, R. (2021)
In: Journal of Experimental Biology, Vol. 224, jeb230961. - journal articleIon irradiation-induced localized stress relaxation in W thin film revealed by cross-sectional X-ray nanodiffractionHlushko, K., Mackova, A., Zalesak, J., Burghammer, M., Davydok, A., Krywka, C., Daniel, R., Keckes, J., Todt, J. (2021)
In: Thin Solid Films, Vol. 722, 138571. - journal articleEffect of B addition on the superelasticity in FeNiCoAlTa single crystalsCzerny, M., Cios, G., Maziarz, W., Chumlyakov, Y., Schell, N., Chulist, R. (2021)
In: Materials & Design, Vol. 197, 109225. - journal articleExploring Structural Changes, Manufacturing, Joining, and Repair of Intermetallic γ-TiAl-Based Alloys: Recent Progress Enabled by In Situ Synchrotron X-Ray TechniquesSpoerk-Erdely, P., Staron, P., Liu, J., Kashaev, N., Stark, A., Hauschildt, K., Maawad, E., Mayer, S., Clemens, H. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2000947. - journal articleDevelopment and strengthening mechanisms of a hybrid CNTs@SiCp/Mg-6Zn composite fabricated by a novel methodDing, C., Hu, X., Shi, H., Gan, W., Wu, K., Wang, X. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, 4, 1363-1372. - journal articleHigh-resolution and sensitivity bi-directional x-ray phase contrast imaging using 2D Talbot array illuminatorsGustschin, A., Riedel, M., Taphorn, K., Petrich, C., Gottwald, W., Noichl, W., Busse, M., Francis, S., Beckmann, F., Hammel, J., Moosmann, J., Thibault, P., Herzen, J. (2021)
In: Optica, Vol. 8, 12, 1588-1595. - journal articleResponse of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fire-resistant steelEscobar, J.D., Delfino, P.M., Ariza-Echeverri, E.A., Carvalho, F.M., Schell, N., Stark, A., Rodrigues, T.A., Oliveira, J.P., Avila, J.A., Goldenstein, H., Tschiptschin, A.P. (2021)
In: Materials Characterization, Vol. 182, 111567. - journal articleSalt-Dependent Phase Transition Behavior of Doubly Thermoresponsive Poly(sulfobetaine)-Based Diblock Copolymer Thin FilmsKreuzer, L.P., Widmann, T., Geiger, C., Wang, P., Vagias, A., Heger, J.E., Haese, M., Hildebrand, V., Laschewsky, A., Papadakis, C.M., Müller-Buschbaum, P. (2021)
In: Langmuir, Vol. 37, 30, 9179-9191. - journal articleDeformation kinetics of a TRIP steel determined by in situ high-energy synchrotron X-ray diffractionBarriobero-Vila, P., Jerez-Mesa, R., Guitar, A., Gavalda-Diaz, O., Travieso-Rodríguez, J.A., Stark, A., Schell, N., Llumà, J., Fargas, G., Mateo, A., Roa, J.J. (2021)
In: Materialia, Vol. 20, 101251. - journal articleMicrostructure evolution induced by the intrinsic heat treatment occurring during wire-arc additive manufacturing of an Al-Mg-Zn-Cu crossover alloyKlein, T., Graf, G., Staron, P., Stark, A., Clemens, H., Spoerk-Erdely, P. (2021)
In: Materials Letters, Vol. 303, 130500. - journal articleLithium distribution and transfer in high-power 18650-type Li-ion cells at multiple length scalesPetz, D., Mühlbauer, M.J., Baran, V., Schökel, A., Kochetov, V., Hofmann, M., Dyadkin, V., Staron, P., Vaughan, G., Lienert, U., Müller-Buschbaum, P., Senyshyn, A. (2021)
In: Energy Storage Materials, Vol. 41, 546-553. - journal articleAn In Situ Synchrotron Dilatometry and Atomistic Study of Martensite and Carbide Formation during Partitioning and TemperingPlesiutschnig, E., Albu, M., Canelo-Yubero, D., Razumovskiy, V.I., Stark, A., Schell, N., Kothleitner, G., Beal, C., Sommitsch, C., Hofer, F. (2021)
In: Materials, Vol. 14, 14, 3849. - journal articleEvolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloyZhang, X., Lutz, A., Andrä, H., Lahres, M., Gan, W., Maawad, E., Emmelmann, C. (2021)
In: International Journal of Plasticity, Vol. 139, 102946. - journal articleMiocene pinhole borer ambrosia beetles: new species of Diapus (Coleoptera: Curculionidae: Platypodinae)Solórzano-Kraemer, M., Hammel, J., Kunz, R., Xu, C., Cognato, A. (2021)
In: Palaeoworld, - journal articleTernary Nanoswitches Realized with Multiresponsive PMMA-b-PNIPMAM Films in Mixed Water/Acetone Vapor AtmospheresGeiger, C., Reitenbach, J., Henschel, C., Kreuzer, L.P., Widmann, T., Wang, P., Mangiapia, G., Moulin, J.-F., Papadakis, C.M., Laschewsky, A., Müller-Buschbaum, P. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100191. - journal article3D characterisation of hydrogen environmentally assisted cracking during static loading of AA7449-T7651De Francisco, U., Beckmann, F., Moosmann, J., Larrosa, N., Peel, M. (2021)
In: International Journal of Fracture, Vol. 232, 1, 93-116. - journal articleAssessing the microstructure and in vitro degradation behavior of Mg-xGd screw implants using µCTKrüger, D., Zeller-Plumhoff, B., Wiese, B., Yi, S., Zuber, M., Wieland, F., Moosmann, J., Willumeit-Römer, R. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, 6, 2207-2222. - journal articleAn additively manufactured and direct-aged AlSi3.5Mg2.5 alloy with superior strength and ductility: micromechanical mechanismsZhang, X.X., Lutz, A., Andrä, H., Lahres, M., Sittig, D., Maawad, E., Gan, W.M., Knoop, D. (2021)
In: International Journal of Plasticity, Vol. 146, 103083. - journal articleRole of polymorph microstructure of Ti6Al4V alloy on PEO coating formation in phosphate electrolyteWu, T., Blawert, C., Serdechnova, M., Karlova, P., Dovzhenko, G., Wieland, F., Zheludkevich, M. (2021)
In: Surface and Coatings Technology, Vol. 428, 127890. - journal articleStructure and Properties of Ti-Al-Ta and Ti-Al-Cr Cladding Layers Fabricated on TitaniumLazurenko, D.V., Golkovsky, M.G., Stark, A., Pyczak, F., Bataev, I.A., Ruktuev, A.A., Petrov, I.Yu., Laptev, I.S. (2021)
In: Metals, Vol. 11, 7, 1139. - journal articleIn situ observation of competitive growth of α grains during β → α transformation in laser beam manufactured TiAl alloysLiu, J., Wu, T., Wang, M., Wang, L., Zhou, Q., Wang, K., Staron, P., Schell, N., Huber, N., Kashaev, N. (2021)
In: Materials Characterization, Vol. 179, 111371. - journal articleNew insight into deformation induced α variant selection in a metastable β titanium alloy during isothermal compression at 600 °CHua, K., Zhang, F., Kou, H., Wan, Q., Zhang, Y., Gan, W., Li, J. (2021)
In: Progress in Natural Science: Materials International, Vol. 31, 3, 471-476. - journal articleIn Situ Synchrotron X-Ray Diffraction during High-Pressure Torsion Deformation of Ni and NiTiKerber, M., Spieckermann, F., Schuster, R., von Baeckmann, C., Fischer, T., Schell, N., Waitz, T., Schafler, E. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100159. - journal articleInterface-Mediated Twinning-Induced Plasticity in a Fine Hexagonal Microstructure Generated by Additive ManufacturingBarriobero-Vila, P., Vallejos, J., Gussone, J., Haubrich, J., Kelm, K., Stark, A., Schell, N., Requena, G. (2021)
In: Advanced Materials, Vol. 33, 52, 2105096. - journal articleIn-situ synchrotron X-ray diffraction during quenching and tempering of SAE 52100 steelFoster, D., Paladugu, M., Hughes, J., Kapousidou, M., Islam, U., Stark, A., Schell, N., Jimenez-Melero, E. (2021)
In: Materials Today : Communications, Vol. 29, 102930. - journal articleEvolution of microstructure and crystallographic texture of Ni-Mn-Ga melt-spun ribbons exhibiting 1.15% magnetic field-induced strainWójcik, A., Chulist, R., Czaja, P., Kowalczyk, M., Zackiewicz, P., Schell, N., Maziarz, W. (2021)
In: Acta Materialia, Vol. 219, 117237. - journal articleThe temperature effect on the plastic deformation of the Mg88Zn7Y5 alloy with LPSO phase studied by in-situ synchrotron radiation diffractionFekete, K., Farkas, G., Drozdenko, D., Tolnai, D., Stark, A., Dobroň, P., Garcés, G., Máthis, K. (2021)
In: Intermetallics, Vol. 138, 107321. - journal articleSolid-Solid Phase Transformations and Their Kinetics in Ti-Al-Nb AlloysDistl, B., Hauschildt, K., Pyczak, F., Stein, F. (2021)
In: Metals, Vol. 11, 12, 1991. - journal articleBreaking the continuity of the Al2O3 oxide scale by additions of Cr in Co-Al-W-based superalloysLiang, Z., Pyczak, F., Stark, A., Rao, Z., Neumeier, S., Göken, M. (2021)
In: Corrosion Science, Vol. 189, 109594. - journal articleInfluence of small amounts of Si and Cr on the high temperature oxidation behavior of novel cobalt base superalloysLiang, Z., Göken, M., Lorenz, U., Neumeier, S., Oehring, M., Pyczak, F., Stark, A., Wang, L. (2021)
In: Corrosion Science, Vol. 184, 109388. - journal articleMicrostructure Analysis and Bulk Texture Study in Wide Magnesium Alloy Sheets Processed by Twin-Roll CastingLi, Y., Wang, T., Liu, Y., Chen, D., Sun, K., Li, M., Gan, W., Zha, M., Wang, S., Hofmann, M., Liu, X., Bai, R., Hou, Y., Gao, J., Li, X., Yu, Z., Tian, G. (2021)
In: Science of Advanced Materials, Vol. 13, 9, 1771-1780. - journal articleIn-situ high-energy X-ray diffraction study of austenite decomposition during rapid cooling and isothermal holding in two HSLA steelsLin, S., Borggren, U., Stark, A., Borgenstam, A., Mu, W., Hedström, P. (2021)
In: Metallurgical and Materials Transactions A, Vol. 52, 5, 1812-1825. - journal articleIn situ Investigation during Low Pressure Carburizing by Means of Synchrotron X-ray Diffraction : In-situ-Untersuchung während der Niederdruckaufkohlung mittels Synchrotron-RöntgenbeugungTapar, O., Steinbacher, M., Gibmeier, J., Schell, N., Epp, J. (2021)
In: HTM - Journal of Heat Treatment and Materials, Vol. 76, 6, 417-431. - journal articleStainless steel reveals an anomaly in thermal expansion behavior of severely deformed materialsRenk, O., Enzinger, R., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L., Ruban, A. (2021)
In: Physical Review Materials, Vol. 5, 11, 113609. - journal articleIn situ high-energy X-ray diffraction of precipitation and dissolution reactions during heating of Al alloysFröck, H., Rowolt, C., Milkereit, B., Reich, M., Kowalski, W., Stark, A., Kessler, O. (2021)
In: Journal of Materials Science, Vol. 56, 35, 19697-19708. - journal articleParasitic hump-backed flies (Diptera: Phoridae) from Miocene ambersSolórzano-Kraemer, M.M., Bourdeau, C., Rosse-Guillevic, S., Hammel, J.U., Xu, C.-P., Brown, B.V. (2021)
In: Palaeoworld, - journal articleEffect of heat treatments on 316 stainless steel parts fabricated by wire and arc additive manufacturing : Microstructure and synchrotron X-ray diffraction analysisRodrigues, T.A., Escobar, J.D., Shen, J., Duarte, V.R., Ribamar, G.G., Avila, J.A., Maawad, E., Schell, N., Santos, T.G., Oliveira, J.P. (2021)
In: Additive Manufacturing, Vol. 48, Part B, 102428. - journal articleTexas beetle larvae (Brachypsectridae) – the last 100 million years reviewedHaug, J., Zippel, A., Haug, G., Hoffeins, C., Hoffeins, H., Hammel, J., Baranov, V., Haug, C. (2021)
In: Palaeodiversity, Vol. 14, 1, 161-183. - journal articleDefects and plasticity in ultrastrong supercrystalline nanocompositesGiuntini, D., Zhao, S., Krekeler, T., Li, M., Blankenburg, M., Bor, B., Schaan, G., Domènech, B., Müller, M., Scheider, I., Ritter, M., Schneider, G.A. (2021)
In: Science Advances, Vol. 7, 2, eabb6063. - journal articleTunable Hydrogels with Improved Viscoelastic Properties from Hybrid PolypeptidesSkoulas, D., Mangiapia, G., Parisi, D., Kasimatis, M., Glynos, E., Stratikos, E., Vlassopoulos, D., Frielinghaus, H., Iatrou, H. (2021)
In: Macromolecules, Vol. 54, 23, 10786-10800. - journal articleMorphology–Ionic Conductivity Relationship in Polymer–Titania Hybrid Electrolytes for Lithium-Ion BatteriesSchaper, S., Metwalli, E., Kaeppel, M., Kriele, A., Gilles, R., Raftopoulos, K., Müller-Buschbaum, P. (2021)
In: ACS Applied Energy Materials, Vol. 4, 12, 13438-13443. - journal articleOn the reversibility of the α2/ωo phase transformation in a high Nb containing TiAl alloy during high temperature deformationSong, L., Appel, F., Stark, A., Lorenz, U., He, J., He, Z., Lin, J., Zhang, T., Pyczak, F. (2021)
In: Journal of Materials Science & Technology, Vol. 93, 96-102. - journal articleIn Situ Investigation of the Rapid Solidification Behavior of Intermetallic γ-TiAl-Based Alloys Using High-Energy X-Ray DiffractionGraf, G., Rosigkeit, J., Krohmer, E., Staron, P., Krenn, R., Clemens, H., Spoerk-Erdely, P. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100557. - journal articleScaling the U-net: segmentation of biodegradable bone implants in high-resolution synchrotron radiation microtomogramsBaltruschat, I.M., Ćwieka, H., Krüger, D., Zeller-Plumhoff, B., Schlünzen, F., Willumeit-Römer, R., Moosmann, J., Heuser, P. (2021)
In: Scientific Reports, Vol. 11, 1, 24237. - journal articleTemperature dependent partitioning mechanisms and its associated microstructural evolution in a CMnSiAl quenching and partitioning (Q&P) steelMaheswari, N., Amirthalingam, M., Schwedt, A., Brokmeier, H.G., Schell, N., Mayer, J., Kumar, K.C.H., Sankaran, S. (2021)
In: Materials Today : Communications, Vol. 29, 102918. - journal articleIn-situ synchrotron X-ray diffraction analysis of the elastic behaviour of martensite and H-phase in a NiTiHf high temperature shape memory alloy fabricated by laser powder bed fusionShen, J., Zeng, Z., Nematollahi, M., Schell, N., Maawad, E., Vasin, R., Safaei, K., Poorganji, B., Elahinia, M., Oliveira, J. (2021)
In: Additive Manufacturing Letters, Vol. 1, 100003. - journal articleStability of Ordered B2-βO and Disordered BCC-β Phases in Tial - A First Principles StudyPyczak, F., Kononikhina, V., Stark, A. (2021)
In: Materials Science Forum, Vol. 1016, 5, 1159-1165. - journal articleCharacterization of rapidly solidified Al-Mg-Sc alloys with Li additionGancarz, T., Dobosz, A., Bogno, A., Cempura, G., Schell, N., Chulist, R., Henein, H. (2021)
In: Materials Characterization, Vol. 178, 111290. - journal articleEffect of the as-built microstructure on the martensite to austenite transformation in a 18Ni maraging steel after laser-based powder bed fusionConde, F., Avila, J., Oliveira, J., Schell, N., Oliveira, M., Oscobar, J. (2021)
In: Additive Manufacturing, Vol. 46, 102122. - journal articleMultimodal ex vivo methods reveal that Gd-rich corrosion byproducts remain at the implant site of biodegradable Mg-Gd screwsPeruzzi, N., Galli, S., Helmholz, H., Kardjilov, N., Krüger, D., Markötter, H., Moosmann, J., Orlov, D., Prgomet, Z., Willumeit-Römer, R., Wennerberg, A., Bech, M. (2021)
In: Acta Biomaterialia, Vol. 136, 582-591. - journal articleChemical heterogeneities in tungsten containing TiAl alloys processed by powder metallurgyCouret, A., Allen, M., Rackel, M.W., Galy, B., Monchoux, J.-P., Güther, V., Pyczak, F., Sallot, P., Thomas, M. (2021)
In: Materialia, Vol. 18, 101147. - journal articleInternal Stress Evolution and Subsurface Phase Transformation in Titanium Parts Manufactured by Laser Powder Bed Fusion - An In Situ X-Ray Diffraction StudySchmeiser, F., Krohmer, E., Schell, N., Uhlmann, E., Reimers, W. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2001502.
2020
- journal articleX-ray Zernike phase contrast tomography: 3D ROI visualization of mm-sized mice organ tissues down to sub-cellular componentsLongo, E., Sancey, L., Flenner, S., Kubec, A., Bonnin, A., David, C., Müller, M., Greving, I. (2020)
In: Biomedical Optics Express, Vol. 11, 10, 5506-5517. - journal articleHRTEM analysis of the high-temperature phases of the newly developed high-temperature Ni-base superalloy VDM 780 PremiumGhica, C., Solís, C., Munke, J., Stark, A., Gehrmann, B., Bergner, M., Rösler, J., Gilles, R. (2020)
In: Journal of Alloys and Compounds, Vol. 814, 152157. - journal articleIn-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructuresCallegari, B., Oliveira, J., Aristizabal, K., Coelho, R., Brito, P., Wu, L., Schell, N., Soldera, F., Mücklich, F., Pinto, H. (2020)
In: Materials Characterization, Vol. 165, 110400. - journal articleElastic strain induced abnormal grain growth in graphene nanosheets (GNSs) reinforced copper (Cu) matrix compositesShi, H., Gan, W., Esling, C., Wang, X., Zhang, Y., Maawad, E., Stark, A., Li, X., Wang, L. (2020)
In: Acta Materialia, Vol. 200, 338-350. - journal articleIn operando monitoring of wood transformation during pretreatment with ionic liquidsViell, J., Szekely, N., Mangiapia, G., Hövelmann, C., Marks, C., Frielinghaus, H. (2020)
In: Cellulose, Vol. 27, 4889-4907. - journal articleEcomorphology of the pectoral girdle in anurans (Amphibia, Anura): Shape diversity and biomechanical considerationsEngelkes, K., Kath, L., Kleinteich, T., Hammel, J., Beerlink, A., Haas, A. (2020)
In: Ecology and Evolution, Vol. 10, 20, 11467-11487. - journal articleMultiple Mechanical Gradients are Responsible for the Strong Adhesion of Spider Attachment HairFlenner, S., Schaber, C., Krasnov, I., Stieglitz, H., Rosenthal, M., Burghammer, M., Gorb, S., Müller, M. (2020)
In: Advanced Materials, Vol. 32, 37, 2002758. - journal articleObservation of compact ferrimagnetic skyrmions in DyCo3 filmChen, K., Lott, D., Philippi-Kobs, A., Weigand, M., Luo, C., Radu, F. (2020)
In: Nanoscale, Vol. 12, 18137-18143. - journal articleA zone melting device for the in situ observation of directional solidification using high-energy synchrotron x rays editors-pickGombola, C., Hasemann, G., Kauffmann, A., Sprenger, I., Laube, S., Schmitt, A., Gang, F., Bolbut, V., Oehring, M., Blankenburg, M., Schell, N., Staron, P., Pyczak, F., Krüger, M., Heilmaier, M. (2020)
In: Review of Scientific Instruments, Vol. 91, 9, 093901. - journal articleDirect Energy Deposition of TiAl for Hybrid Manufacturing and Repair of Turbine BladesRittinghaus, S., Schmelzer, J., Rackel, M., Hemes, S., Vogelpoth, A., Hecht, U., Weisheit, A. (2020)
In: Materials, Vol. 13, 19, 4392. - journal articleObservation of iron diffusion in the near-surface region of magnetite at 470 KTober, S., Creutzburg, M., Arndt, B., Krausert, K., Mattauch, S., Koutsioubas, A., Pütter, S., Mohd, A., Volgger, L., Hutter, H., Noei, H., Vonk, V., Lott, D., Stierle, A. (2020)
In: Physical Review Research, Vol. 2, 023406. - journal articleA laser powder bed fusion system for in situ x-ray diffraction with high-energy synchrotron radiationUhlmann, E., Krohmer, E., Schmeiser, F., Schell, N., Reimers, R. (2020)
In: Review of Scientific Instruments, Vol. 91, 7, 075104. - journal articleProduction and characterization of functionally graded NiTi shape memory alloys by Joule effectInácio, P., Camacho, E., Schell, N., Braz Fernandes, F., Oliveira, J., Santos, T. (2020)
In: Journal of Materials Processing Technology, Vol. 285, 116803. - journal articleCharacterization of carbides in Q&P steels using a combination of high-resolution methodsEbner, S., Schnitzer, R., Suppan, C., Stark, A., Liu, H., Hofer, C. (2020)
In: Materials Characterization, Vol. 163, 110242. - journal articleInconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, residual stress and property gradientsBodner, S., van de Vorst, L., Zalesak, J., Todt, J., Keckes, J., Maier-Kiener, V., Sartory, B., Schell, N., Hooijmans, J., Saurwalt, J. (2020)
In: Additive Manufacturing, Vol. 32, 101027. - journal articleUltrafine eutectic Ti-Fe-based alloys processed by additive manufacturing – A new candidate for high temperature applicationsGussone, J., Bugelnig, K., Barriobero-Vila, P., da Silva, J., Hecht, U., Dresbach, C., Sket, F., Cloetens, P., Stark, A., Schell, N., Haubrich, J., Requena, G. (2020)
In: Applied Materials Today, Vol. 20, 100767. - journal articlePushing the temporal resolution in absorption and Zernike phase contrast nanotomography: enabling fast in situ experimentsFlenner, S., Storm, M., Kubec, A., Longo, E., Döring, F., Pelt, D., David, C., Müller, M., Greving, I. (2020)
In: Journal of Synchrotron Radiation, Vol. 27, 5, - journal articleInitial plasticity stages in Mg alloys containing Long-Period Stacking Ordered phases using High Resolution Digital Image Correlation (HRDIC) and in-situ synchrotron radiationGarces, G., Orozco-Caballero, A., Quinta da Fonseca, J., Pérez, P., Medina, J., Stark, A., Schell, N., Adeva, P. (2020)
In: Materials Science and Engineering A, Vol. 772, 138716. - journal articleAnisotropic Plastic Behavior in an Extruded Long-Period Ordered Structure Mg90Y6.5Ni3.5 (at.%) AlloyGarces, G., Barea, R., Stark, A., Schell, N. (2020)
In: Crystals, Vol. 10, 4, 279. - journal articleApplication of Different Diffraction Peak Profile Analysis Methods to Study the Structure Evolution of Cold-Rolled Hexagonal α-TitaniumIvanov, I., Lazurenko, D., Stark, A., Pyczak, F., Thömmes, A., Bataev, I. (2020)
In: Metals and Materials International, Vol. 26, 83-93. - journal articleHot deformation of Mg-Y-Zn alloy with a low content of the LPSO phase studied by in-situ synchrotron radiation diffractionHorváth Fekete, K., Drozdenko, D., Čapek, J., Máthis, K., Tolnai, D., Stark, A., Garcés, G., Dobroň, P. (2020)
In: Journal of Magnesium and Alloys, Vol. 8, 1, 199-209. - journal articleAn insitu and exsitu study of chi phase formation in a hypoeutectic Fe-based hardfacing alloyWieczerzak, K., Michler, J., Wheeler, J., Lech, S., Chulist, R., Gondek, L., Czub, J., Hoser, A., Schell, N., Bala, P. (2020)
In: Materials and Design, Vol. 188, 108438. - journal articleControlling intermetallic compounds formation during laser welding of NiTi to 316L stainless steelShamsolhodaei, A., Oliveira, J., Schell, N., Maawad, E., Panton, B., Zhou, Y. (2020)
In: Intermetallics, Vol. 116, 106656. - journal articleInside the head of a cybertype – three-dimensional reconstruction of the head muscles of Ommatoiulus avatar (Diplopoda: Juliformia: Julidae) reveals insights into the feeding movements of JuliformiaNaumann, B., Reip, H.S., Akkari, N., Neubert, D., Hammel, J.U. (2020)
In: Zoological Journal of the Linnean Society, Vol. 188, 4, 954-975. - journal articleThe oldest short-tailed whipscorpion (Schizomida): a new genus and species from the Upper Cretaceous amber of northern MyanmarMüller, S.P., Dunlop, J.A., Kotthoff, U., Hammel, J.U., Harms, D. (2020)
In: Cretaceous Research, Vol. 106, 104227. - journal articleGold nanoparticles interacting with synthetic lipid rafts: an AFM investigationRidolfi, A., Caselli, L., Montis, C., Mangiapia, G., Berti, D., Brucale, M., Valle, F. (2020)
In: Journal of Microscopy, Vol. 280, 3, 194-203. - journal article3D printed spherical environmental chamber for neutron reflectometry and grazing-incidence small-angle neutron scattering experimentsWidmann, T., Kreuzer, L., Mangiapia, G., Haese, M., Frielinghaus, H., Müller-Buschbaum, P. (2020)
In: Review of Scientific Instruments, Vol. 91, 113903. - journal articleCyclic Water Storage Behavior of Doubly Thermoresponsive Poly(sulfobetaine)-Based Diblock Copolymer Thin FilmsKreuzer, L., Widmann, T., Aldosari, N., Bießmann, L., Mangiapia, G., Hildebrand, V., Laschewsky, A., Papadakis, C., Müller-Buschbaum, P. (2020)
In: Macromolecules, Vol. 53, 20, 9108-9121. - journal articleComparing the backfilling of mesoporous titania thin films with hole conductors of different sizes sharing the same mass densityMärkl, R., Hohn, N., Hupf, E., Bießmann, L., Körstgens, V., Kreuzer, L., Mangiapia, G., Pomm, M., Kriele, A., Rivard, E., Müller-Buschbaum, P. (2020)
In: IUCrJ, Vol. 7, 2, 268-275. - journal articleDetermination of Temperature-Dependent Elastic Constants of Steel AISI 4140 by Use of In Situ X-ray Dilatometry ExperimentsKiefer, D., Gibmeier, J., Stark, A. (2020)
In: Materials, Vol. 13, 10, 2378. - journal articleHot forging wire and arc additive manufacturing (HF-WAAM)Duarte, V., Rodrigues, T., Schell, N., Miranda, M., Oliveira, J., Santos, T. (2020)
In: Additive Manufacturing, Vol. 35, 101193. - journal articleIn situ compressive investigations on the effects of solid solution Gd on the texture and lattice strain evolution of MgXu, Y., Huang, Y., Zhong, Z., You, S., Gan, W., Xiao, B., Maawad, E., Schell, N., Gensch, F., Pan, F., Hort, N. (2020)
In: Materials Science and Engineering A, Vol. 774, 138938. - journal articleInfluence of spinodal decomposition and fcc→w phase transformation on global and local mechanical properties of nanolamellar CVD fcc-Ti1-xAlxN coatingsTkadletz, M., Lechner, A., Schalk, N., Sartory, B., Stark, A., Schell, N., Saringer, C., Mitterer, C., Czettl, C. (2020)
In: Materialia, Vol. 11, 100696. - journal articleTemperature dependence of misfit in different Co–Al–W ternary alloys measured by synchrotron X-ray diffractionLi, Y., Pyczak, F., Stark, A., Wang, L., Oehring, M., Paul, J., Lorenz, U. (2020)
In: Journal of Alloys and Compounds, Vol. 819, 152940. - journal articleNovel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sinteringWimler, D., Lindemann, J., Gammer, C., Spoerk-Erdely, P., Stark, A., Clemens, H., Mayer, S. (2020)
In: Materials Science and Engineering: A, Vol. 792, 139798. - journal articleLoad partition during hot deformation of AlSi12 and AlSi10Cu6Ni2 alloys: a quantitative evaluation of the stiffness of Si networksCanelo-Yubero, D., Etzlstorfer, C., Koos, R., Germann, H., Steffens, T., Stark, A., Boller, E., Requena, G. (2020)
In: Journal of Materials Science, Vol. 55, 14558-14570. - journal articleMapping the geometry of Ti-6Al-4V: From martensite decomposition to localized spheroidization during selective laser meltingBarriobero-Vila, P., Artzt, K., Stark, A., Schell, N., Siggel, M., Gussone, J., Kleinert, J., Kitsche, W., Requena, G., Haubrich, J. (2020)
In: Scripta Materialia, Vol. 182, 48-52. - journal articleMicrostructural evolution and thermal stability of AlCr(Si)N hard coatings revealed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffractionJäger, N., Meindlhumer, M., Spor, S., Hruby, H., Julin, J., Stark, A., Nahif, F., Keckes, J., Mitterer, C., Daniel, R. (2020)
In: Acta Materialia, Vol. 186, 545-554. - journal articleStudy of Microstructural Development of Bainitic Steel using Eddy Current and Synchrotron XRD in-situ Measurement Techniques during Thermomechanical TreatmentDong, J., Skalecki, M., Hatwig, R., Bevilaqua, W., Stark, A., Epp, J., da Silva Rocha, A., Zoch, H. (2020)
In: HTM - Journal of Heat Treatment and Materials, Vol. 75, 1, 3-22. - journal articleIn-situ analysis of continuous cooling precipitation in Al alloys by wide-angle X-ray scatteringRowolt, C., Fröck, H., Milkereit, B., Reich, M., Kowalski, W., Stark, A., Keßler, O. (2020)
In: Science and Technology of Advanced Materials, Vol. 21, 1, 205-218. - journal articleTexture and Lattice Strain Evolution during Tensile Loading of Mg–Zn Alloys Measured by Synchrotron DiffractionZhou, X., Ha, C., Yi, S., Bohlen, J., Schell, N., Chi, Y., Zheng, M., Brokmeier, H. (2020)
In: Metals, Vol. 10, 1, 124. - journal articleIn situ observations of continuous cooling transformations in low alloy steelsPickering, E., Collins, J., Stark, A., Connor, L., Kiely, A., Stone, H. (2020)
In: Materials Characterization, Vol. 165, 110355. - journal articleBiomedical x-ray imaging with a GaAs photon-counting detector: A comparative studyScholz, J., Birnbacher, L., Petrich, C., Riedel, M., Heck, L., Gkoumas, S., Sellerer, T., Achterhold, K., Herzen, J. (2020)
In: APL Photonics, Vol. 5, 106108. - journal articleMechanistic study of superlattice-enabled high toughness and hardness in MoN/TaN coatingsHahn, R., Koutná, N., Wójcik, T., Davydok, A., Kolozsvári, S., Krywka, C., Holec, D., Bartosik, M., Mayrhofer, P. (2020)
In: Communications Materials, Vol. 1, 62. - journal articleStress relaxation through thermal crack formation in CVD TiCN coatings grown on WC-Co with different Co contentsStylianou, R., Velic, D., Daves, W., Ecker, W., Stark, A., Schell, N., Tkadletz, M., Schalk, N., Czettl, C., Mitterer, C. (2020)
In: International Journal of Refractory Metals and Hard Materials, Vol. 86, 105102. - journal articleHigh temperature mechanical behaviour of Mg–6Zn–1Y alloy with 1 wt.% calcium addition: Reinforcing effect due to I-(Mg3Zn6Y1) and Mg6Zn3Ca2 phasesMedina, J., Garces, G., Pérez, P., Stark, A., Schell, N., Adeva, P. (2020)
In: Journal of Magnesium and Alloys, Vol. 8, 4, 1047-1060. - journal articleOxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEMMoritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Letofsky-Papst, I., Czettl, C., Pohler, M., Schalk, N. (2020)
In: Surface and Coatings Technology, Vol. 404, 126632. - journal articleThermo-physical properties of coatings in the Ti(B,N) system grown by chemical vapor depositionKainz, C., Schalk, N., Tkadletz, M., Saringer, C., Winkler, M., Stark, A., Schell, N., Julin, J., Czettl, C. (2020)
In: Surface and Coatings Technology, Vol. 384, 125318. - journal articleHard X-ray nano-holotomography with a Fresnel zone plateFlenner, S., Kubec, A., David, C., Storm, M., Schaber, C., Vollrath, F., Müller, M., Greving, I., Hagemann, J. (2020)
In: Optics Express, Vol. 28, 25, 37514-37525. - journal articleElemental partitioning in medium Mn steel during short-time annealing: An in-situ study using synchrotron x-raysKalsar, R., Sanamar, S., Schell, N., Brokmeier, H., Saha, R., Ghosh, P., Bhagat, A., Suwas, S. (2020)
In: Materialia, Vol. 9, 100594. - journal articleNew insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot workingCallegari, B., Oliveira, J., Coelho, R., Brito, P., Schell, N., Soldera, F., Mücklich, F., Sadik, M., Garcia, J., Pinto, H. (2020)
In: Materials Characterization, Vol. 162, 110180. - journal articleMultiphase magnetism in Yb2Ti2O7Scheie, A., Kindervater, J., Zhang, S., Changlani, H., Sala, G., Ehlers, G., Heinemann, A., Tucker, G., Koohpayeh, S., Broholm, C. (2020)
In: Proceedings of the National Academy of Sciences of the United States of America: PNAS, Vol. 117, 44, 27245-27254. - journal articleIn-situ characterization of continuous dynamic recrystallization during hot torsion of an Al–Si–Mg alloyCanelo-Yubero, D., Kovács, Z., Simonet Fotso, J., Tolnai, D., Schell, N., Groma, I., Poletti, C. (2020)
In: Journal of Alloys and Compounds, Vol. 822, 153282. - journal articleNew insights into high-temperature deformation and phase transformation mechanisms of lamellar structures in high Nb-containing TiAl alloysSong, L., Appel, F., Wang, L., Oehring, M., Hu, X., Stark, A., He, J., Lorenz, U., Zhang, T., Lin, J., Pyczak, F. (2020)
In: Acta Materialia, Vol. 186, 575-586. - journal articleRevealing the interfacial nanostructure of a deep eutectic solvent at a solid electrodeZec, N., Mangiapia, G., Zheludkevich, M., Busch, S., Moulin, J. (2020)
In: Physical Chemistry Chemical Physics, Vol. 22, 21, 12104-12112. - journal articleInfluence of the Ti/Al/Nb ratio on the structure and properties on intermetallic layers obtained on titanium by non-vacuum electron beam claddingLazurenko, D., Laptev, I., Golkovsky, M., Stark, A., Paul, J., Bataev, I., Ruktuev, A., Song, L., Gollwitzer, C., Pyczak, F. (2020)
In: Materials Characterization, Vol. 163, 110264. - journal articleOn the formation of temperature-induced defects at the surface of TEM specimens prepared from TiAl using high-energy Gallium and low-energy Argon ionsFröbel, U., Laipple, D. (2020)
In: Philosophical Magazine, Vol. 100, 15, 1915-1941. - journal articleThe instrument suite of the European Spallation SourceAndersen, K.H., Argyriou, D.N., Jackson, A.J., Houston, J., Henry, P.F., Deen, P.P., Toft-Petersen, R., Beran, P., Strobl, M., Arnold, T., Wacklin-Knecht, H., Tsapatsaris, N., Oksanen, E., Woracek, R., Schweika, W., Mannix, D., Hiess, A., Kennedy, S., Kirstein, O., Petersson Årsköld, S., Taylor, J., Hagen, M.E., Laszlo, G., Kanaki, K., Piscitelli, F., Khaplanov, A., Stefanescu, I., Kittelmann, T., Pfeiffer, D., Hall-Wilton, R., Lopez, C.I., Aprigliano, G., Whitelegg, L., Moreira, F.Y., Olsson, M., Bordallo, H.N., Martín-Rodríguez, D., Schneider, H., Sharp, M., Hartl, M., Nagy, G., Ansell, S., Pullen, S., Vickery, A., Fedrigo, A., Mezei, F., Arai, M., Heenan, R.K., Halcrow, W., Turner, D., Raspino, D., Orszulik, A., Cooper, J., Webb, N., Galsworthy, P., Nightingale, J., Langridge, S., Elmer, J., Frielinghaus, H., Hanslik, R., Gussen, A., Jaksch, S., Engels, R., Kozielewski, T., Butterweck, S., Feygenson, M., Harbott, P., Poqué, A., Schwaab, A., Lieutenant, K., Violini, N., Voigt, J., Brückel, T., Koenen, M., Kämmerling, H., Babcock, E., Salhi, Z., Wischnewski, A., Heynen, A., Désert, S., Jestin, J., Porcher, F., Fabrèges, X., Fabrèges, G., Annighöfer, B., Klimko, S., Dupont, T., Robillard, T., Goukassov, A., Longeville, S., Alba-Simionesco, C., Bourges, P., Guyon Le Bouffy, J., Lavie, P., Rodrigues, S., Calzada, E., Lerche, M., Schillinger, B., Schmakat, P., Schulz, M., Seifert, M., Lohstroh, W., Petry, W., Neuhaus, J., Loaiza, L., Tartaglione, A., Glavic, A., Schütz, S., Stahn, J., Lehmann, E., Morgano, M., Schefer, J., Filges, U., Klauser, C., Niedermayer, C., Fenske, J., Nowak,G., Rouijaa, M., Siemers, D.J., Kiehn, R., Müller, M., Carlsen, H., Udby, L., Lefmann, K., Birk, J.O., Holm-Dahlin, S., Bertelsen, M., Hansen, U.B., Olsen, M.A., Christensen, M., Iversen, K., Christensen, N.B., Rønnow, H.M., Freeman, P.G., Hauback, B.C., Kolevatov, R., Llamas-Jansa, I., Orecchini, A., Sacchetti, F., Petrillo, C., Paciaroni, A., Tozzi, P., Zanatta, M., Luna, P., Herranz, I., del Moral, O.G., Huerta, M., Magán, M., Mosconi, M., Abad, E., Aguilar, J., Stepanyan, S., Bakedano, G., Vivanco, R., Bustinduy, I., Sordo, F., Martínez, J.L., Lechner, R.E., Villacorta, F.J., Šaroun, J., Lukáš, P., Markó, M., Zanetti, M., Bellissima, S., del Rosso, L., Masi, F., Bovo, C., Chowdhury, M., De Bonis, A., DiFresco, L., Scatigno, C., Parker, S.F., Fernandez-Alonso, F., Colognesi, D., Senesi, R., Andreani, C., Gorini, G., Scionti, G., Schreyer, A. (2020)
In: Nuclear Instruments and Methods in Physics Research A, Vol. 957, 163402. - journal articleThe mid-Cretaceous †Lepiceratus Gen. nov. and the Evolution of the Relict Beetle Family Lepiceridae (Insecta: Coleoptera: Myxophaga)Jaloszyñski, P., Luo, X., Hammel, J., Yamamoto, S., Beutel, R. (2020)
In: Journal of Systematic Palaeontology, Vol. 18, 13, 1127-1140. - journal articleGas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloyOliveira, J., Curado, T., Zeng, Z., Lopes, J., Rossinyol, E., Park, J., Schell, N., Braz Fernandes, J., Kim, H. (2020)
In: Materials and Design, Vol. 189, 108505. - journal articleHigh-pressure cell for in situ neutron studies of hydrogen storage materialsAslan, N., Horstmann, C., Metz, O., Kotlyar, O., Dornheim, M., Pistidda, C., Busch, S., Lohstroh, W., Müller, M., Pranzas, K. (2020)
In: Journal of Neutron Research, Vol. 21, 3 - 4, 125-135. - journal articleIn-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM)Rodrigues, T., Duarte, V., Tomàs, D., Avila, J., Escobar, J., Rossinyol, E., Schell, N., Santos, T., Oliveira, J. (2020)
In: Additive Manufacturing, Vol. 34, 101200. - journal articleWire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: Microstructure and mechanical propertiesZeng, Z., Cong, B., Oliveira, J., Ke, W., Schell, N., Peng, B., Qi, Z., Ge, F., Zhang, W., Ao, S. (2020)
In: Additive Manufacturing, Vol. 32, 101051. - journal articleExperimental observation of stress formation during selective laser melting using in situ X-ray diffractionSchmeiser, F., Krohmer, E., Schell, N., Uhlmann, E., Reimers, W. (2020)
In: Additive Manufacturing, Vol. 32, 1010128. - journal articleSurface distortion of Fe dot-decorated TiO2 nanotubular templates using time-of-flight grazing incidence small angle scatteringPaul, N., Moulin, J., Mangiapia, G., Kriele, A., Müller-Buschbaum, P., Opel, M., Paul, A. (2020)
In: Scientific Reports, Vol. 10, 4038. - journal articleExamples of High-energy X-ray Structural Studies at PETRA III: High T C Superconductors, Real-time Surface and Thin Film Processes, and Design of Engineering MaterialsDippel, A., Zimmermann, M., Staron, P., Schneider, J. (2020)
In: Synchrotron Radiation News, Vol. 33, 6, 24-30. - journal articleAdhesion and Surface Layers on Silicon Anodes Suppress Formation of c-Li3.75Si and Solid-Electrolyte InterphaseXie, H., Sayed, S., Kalisvaart, W., Schaper, S., Müller-Buschbaum, P., Luber, E., Olsen, B., Haese, M., Buriak, J. (2020)
In: ACS Applied Energy Materials, Vol. 3, 2, 1609-1616. - journal articlePhase evolution of Al–Mg metal matrix composites during low temperature annealing at 200 °C and 250 °CSanamar, S., Brokmeier, H., Schell, N. (2020)
In: Intermetallics, Vol. 124, 106862. - journal articleEffect of Kind of Deformation on Young's Modulus, Damage Parameter, Texture and Structure of Alloy Mg – 5% Li (wt)Usov, V., Brokmeier, H., Shkatulyak, N., Savchuk, E., Schell, N. (2020)
In: East European Journal of Physics, Vol. 1, 83-95. - journal articleAn in situ and ex situ study of χ phase formation in a hypoeutectic Fe-based hardfacing alloyWieczerzak, K., Michler, J., Wheeler, J., Lech, S., Chulist, R., Gondek, L., Czub, J., Hoser, A., Schell, N., Bala, P. (2020)
In: Materials & Design, Vol. 188, 108438. - journal articleDynamics of porous and amorphous magnesium borohydride to understand solid state Mg-ion-conductorsHeere, M., Hansen, A.-L., Payandeh, S.H., Aslan, N., Gizer, G., Sørby, M.H., Hauback, B.C., Pistidda, C., Dornheim, M., Lohstroh, W. (2020)
In: Scientific Reports, Vol. 10, 1, 9080. - journal articleA critical evaluation of microstructure-texture-mechanical behavior heterogeneity in high pressure torsion processed CoCuFeMnNi high entropy alloySonkusare, R., Biswas, K., Al-Hamdany, N., Brokmeier, H.G., Kalsar, R., Schell, N., Gurao, N.P. (2020)
In: Materials Science and Engineering: A, Vol. 782, 139187. - journal articlePotato Protein Nanofibrils Produced from a Starch Industry SidestreamJosefsson, L., Ye, X., Brett, C.J., Meijer, J., Olsson, C., Sjögren, A., Sundlöf, J., Davydok, A., Langton, M., Emmer, Å., Lendel, C. (2020)
In: ACS Sustainable Chemistry & Engineering, Vol. 8, 2, 1058-1067. - journal articleFirst stages of plasticity in three-point bent Au nanowires detected by in situ Laue microdiffractionRen, Z., Cornelius, T., Leclere, C., Davydok, A., Micha, J., Robach, O., Richter, G., Thomas, O. (2020)
In: Applied Physics Letters, Vol. 116, 24, 243101. - journal articleSelf-Diffusion in 57Fe/natFe Multilayers by In Situ Neutron ReflectometrySajti, S., Bottyán, L., Moulin, J., Paul, A. (2020)
In: Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, Vol. 14, S1-S4. - journal articleEffect of Trapped Solvent on the Interface between PS-b-PMMA Thin Films and P(S-r-MMA) Brush LayersSparnacci, K., Chiarcos, R., Gianotti, V., Laus, M., Giammaria, T., Perego, M., Munaò, G., Milano, G., De Nicola, A., Haese, M., Kreuzer, L., Widmann, T., Müller-Buschbaum, P. (2020)
In: ACS Applied Materials and Interfaces, Vol. 12, 6, 7777-7787. - journal articleInvestigation into the influence of carbon nanotubes addition on residual stresses and mechanical properties in the CNTs@SiCp/Mg-6Zn hybrid composite using neutron diffraction methodDing, C., Gan, W., Hu, X., Wu, K., Wang, X. (2020)
In: Materials Science and Engineering: A, Vol. 797, 140105. - journal articleTexture transition in friction stir processed Al powder compactMalakar, A., Suresh, K., Pancholi, V., Brokmeier, H., Schell, N. (2020)
In: Materials Characterization, Vol. 167, 110525. - journal articleProcessing, microstructure and mechanical properties of a novel mg matrix composites reinforced with urchin-like CNTs@SiCpDing, C., Shi, H., Wu, K., Wang, X., Gan, W., Hu, X., Xu, C. (2020)
In: Diamond and Related Materials, Vol. 109, 108087. - journal articleMicrostructure, texture and hardness of a metastable β-titanium alloy after bar-rolling and annealingGu, B., Chekhonin, P., Schaarschuch, R., Oertel, C.-G., Xin, S.W., Ma, C.L., Zhou, L., Gan, W.M., Skrotzki, W. (2020)
In: Journal of Alloys and Compounds, Vol. 825, 154082. - journal articleEffects of finish turning on an austenitic weld investigated using diffraction methodsKornmeier, J.R., Hofmann, M., Gan, W.M., Robin, V., Valiorgue, F., Pascal, H., Gibmeier, J., Saroun, J. (2020)
In: The International Journal of Advanced Manufacturing Technology, Vol. 108, 3, 635-645. - journal articleOver 2% magnetic-field-induced strain in a polycrystalline Ni50Mn28.5Ga21.5 alloy prepared by directional solidificationLi, Z., Yang, B., He, X., Gan, W., Zhang, Y., Esling, C., Zhao, X., Zuo, L. (2020)
In: Materials Science and Engineering: A, Vol. 780, 139170. - journal articleMicroscopic stresses in carbon nanotube reinforced aluminum matrix composites determined by in-situ neutron diffractionZhang, X.X., Zhang, J.F., Liu, Z.Y., Gan, W.M., Hofmann, M., Andrä, H., Xiao, B.L., Ma, Z.Y. (2020)
In: Journal of Materials Science & Technology, Vol. 54, 58-68. - journal articleSmall-angle neutron scattering (SANS) characterization of 13.5 Cr oxide dispersion strengthened ferritic steel for fusion applicationsCoppola, R., Klimenkov, M., Lindau, R., Mangiapia, G. (2020)
In: Nuclear Materials and Energy, Vol. 24, 100778. - journal articleWork hardening and softening behavior of pure Mg influenced by Zn addition investigated via in-situ neutron diffractionShi, Q.-X., Wang, C.-J., Deng, K.-K., Nie, K.-B., Cao, M., Gan, W.-M., Liang, W. (2020)
In: Materials Science and Engineering: A, Vol. 772, 138827. - journal articleOnset of a skyrmion phase by chemical substitution in MnGe-based chiral magnetsAltynbaev, E., Martin, N., Heinemann, A., Fomicheva, L., Tsvyashchenko, A., Mirebeau, I., Grigoriev, S. (2020)
In: Physical Review B, Vol. 101, 10, 100404. - journal articleRobust metastable skyrmions with tunable size in the chiral magnet FePtMo3NSukhanov, A.S., Heinemann, A., Kautzsch, L., Bocarsly, J.D., Wilson, S.D., Felser, C., Inosov, D.S. (2020)
In: Physical Review B, Vol. 102, 14, 140409. - journal articleThermo-mechanical characterization of NiTi orthodontic archwires with graded actuating forcesRodrigues, P., Fernandes, F., Magalhaes, R., Camacho, E., Lopes, A., Paula, A., Basu, R., Schell, N. (2020)
In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 107, 103747. - journal articleAnisotropic fractal magnetic domain pattern in bulk Mn1.4PtSnSukhanov, A.S., Cespedes, B.E.Z., Vir, P., Cameron, A.S., Heinemann, A., Martin, N., Chaboussant, G., Kumar, V., Milde, P., Eng, L.M., Felser, C., Inosov, D.S. (2020)
In: Physical Review B, Vol. 102, 17, 174447. - journal articleThe effect of heat treatment on the precipitation hardening in FeNiCoAlTa single crystalsCzerny, M., Maziarz, W., Cios, G., Wojcik, A., Chumkyakov, Y., Schell, N., Fitta, M., Chulist, R. (2020)
In: Materials Science and Engineering: A, Vol. 784, 139327. - journal articleMicrostructure and phase transformations of ωo-Ti4Al3Nb based alloys after quenching and subsequent aging at intermediate temperaturesSong, L., Wang, L., Zhang, T., Lin, Y., Pyczak (2020)
In: Journal of Alloys and Compounds, Vol. 821, 153387. - journal articleIndentation response of a superlattice thin film revealed by in-situ scanning X-ray nanodiffractionTodt, J., Krywka, C., Zhang, Z., Mayrhofer, P., Keckes, J., Bartosik, M. (2020)
In: Acta Materialia, Vol. 195, 425-432. - journal articleIndentation-Induced Structural Changes in Vitreous Silica Probed by in-situ Small-Angle X-Ray ScatteringFuhrmann, S., de Macedo, G., Limbach, R., Krywka, C., Bruns, S., Durst, K., Wondraczek, L. (2020)
In: Frontiers in Materials, Vol. 7, 173. - journal articlePhase Transition Kinetics of Doubly Thermoresponsive Poly(sulfobetaine)-Based Diblock Copolymer Thin FilmsKreuzer, L., Widmann, T., Bießmann, L., Hohn, N., Pantle, J., Märkl, R., Moulin, J., Hildebrand, V., Laschewsky, A., Papadakis, C., Müller-Buschbaum, P. (2020)
In: Macromolecules, Vol. 53, 8, 2841-2855. - journal articleFollow-up structural evolution of Ni/Ti reactive nano and microlayers during diffusion bonding of NiTi to Ti6Al4V in a synchrotron beamlineCavaleiro, A., Ramos, A., Braz Fernandes, F., Schell, N., Viera, M. (2020)
In: Journal of Materials Processing Technology, Vol. 275, 116354. - journal articleEvaluation of the Weighted Mean X-ray Energy for an Imaging System Via Propagation-Based Phase-Contrast ImagingSeifert, M., Weule, M., Cipiccia, S., Flenner, S., Hagemann, J., Ludwig, V., Michel, T., Neumayer, P., Schuster, M., Wolf, A., Anton, G., Akstaller, B. (2020)
In: Journal of Imaging, Vol. 6, 7, 63.
2019
- journal articleMagnetic small-angle neutron scatteringMühlbauer, S., Honecker, D., Périgo, É.A., Bergner, F., Disch, S., Heinemann, A., Erokhin, S., Berkov, D., Leighton, C., Eskildsen, M.R., Michels, A. (2019)
In: Reviews of Modern Physics, Vol. 91, 1, 015004. - journal articleUltrahigh-resolution neutron spectroscopy of low-energy spin dynamics in UGe2Haslbeck, F., Säubert, S., Seifert, M., Franz, C., Schulz, M., Heinemann, A., Keller, T., Das, P., Thompson, J.D., Bauer, E.D., Pfleiderer, C., Janoschek, M. (2019)
In: Physical Review B, Vol. 99, 1, 014429. - journal articleMagnetic structure of the inverse opal-like structures: Small angle neutron diffraction and micromagnetic simulationsMistonov, A.A., Dubitskiy, I.S., Shishkin, I.S., Grigoryeva, N.A., Heinemann, A., Sapoletova, N.A., Valkovskiy, G.A., Grigoriev, S.V. (2019)
In: Journal of Magnetism and Magnetic Materials, Vol. 477, 99-108. - journal articleHigh strength nanocrystalline Cu–Co alloys with high tensile ductilityBachmeier, A., Rathmayr, G.B., Schmauch, J., Schell, N., Stark, A., de Jonge, N., Pippan, R. (2019)
In: Journal of Materials Research, Vol. 34, 1, 58-68. - journal articleIn situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austeniteEggbauer, A., Lukas, M., Ressel, G., Prevedel, P., Mendez-Martin, F., Keckes, J., Stark, A., Ebner, R. (2019)
In: Journal of Materials Science, Vol. 54, 9197-9212. - journal articleNanoporous gold: a hierarchical and multiscale 3D test pattern for characterizing X-ray nano-tomography systemsLarsson, E., Guersoy, D., De Carlo, F., Lilleodden, E.T., Storm, M., Wilde, F., Hu, K., Mueller, M., Greving, I. (2019)
In: Journal of Synchrotron Radiation, Vol. 26, 1, 194-204. - journal articleAustenite decomposition and carbon partitioning during quenching and partitioning heat treatments studied via in-situ X-ray diffractionEbner, S., Suppan, C., Stark, A., Schnitzer, R., Hofer, C. (2019)
In: Materials and Design, Vol. 178, 107862. - journal articleSpin-wave stiffness in the Dzyaloshinskii-Moriya helimagnet with ferrimagnetic ordering Cu2OSeO3Grigoriev, S.V., Pschenichnyi, K.A., Altynbaev, E.V., Heinemann, A., Magrez, A. (2019)
In: Physical Review B, Vol. 99, 5, 054427. - journal articlePhase evolution of radio frequency magnetron sputtered Cr-rich (Cr,Zr)2O3 coatings studied by in situ synchrotron X-ray diffraction during annealing in air or vacuumLandälv, L., Rogström, L., Lu, J., Ostach, D., Eriksson, F., Junaid, M., Ghafoor, N., Ekström, E., Hsiao, C., Leiste, H., Ahlgren, M., Göthelid, E., Alling, B., Hultmann, L., Stüber, M., Schell, N., Birch, J., Eklund, P. (2019)
In: Journal of Materials Research, Vol. 34, 22, 3735-3746. - journal articleTunable viscosity modification with diluted particles: when particles decrease the viscosity of complex fluidsGvaramia, M., Mangiapia, G., Pipich, V., Appavou, M., Jaksch, S., Holderer, O., Rukhadze, M., Frielinghaus, H. (2019)
In: Colloid and Polymer Science, Vol. 297, 11-12, 1507-1517. - journal articleMicrostructure evolution and enhanced creep property of a high Nb containing TiAl alloy with carbon additionSong, L., Hu, X., Wang, L., Stark, A., Lazurenko, D., Lorenz, U., Lin, J., Pyczak, F., Zhang, T. (2019)
In: Journal of Alloys and Compounds, Vol. 807, 151649. - journal articleGrowth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditionsWahlmann, B., Galgon, F., Stark, A., Gayer, S., Schell, N., Staron, P., Körner, C. (2019)
In: Acta Materialia, Vol. 180, 84-96. - journal articleEvidence for the formation of nanoprecipitates with magnetically disordered regions in bulk Ni50Mn45In5 Heusler alloysBenacchio, G., Titov, I., Malyeyev, A., Peral, I., Bersweiler, M., Bender, P., Mettus, D., Honecker, D., Gilbert, E.P., Coduri, M., Heinemann, A., Mühlbauer, S., Cąklr, A., Acet, M., Michels, A. (2019)
In: Physical Review B, Vol. 99, 18, 184422. - journal articleRotation of the magnetic vortex lattice in Ru7B3 driven by the effects of broken time-reversal and inversion symmetryCameron, A.S., Yerin, Y.S., Tymoshenko, Y.V., Portnichenko, P.Y., Sukhanov, A.S., Hatnean, M.C., Paul, D.M.K., Balakrishnan, G., Cubitt, R., Heinemann, A., Inosov, D.S. (2019)
In: Physical Review B, Vol. 100, 2, 024518. - journal articleIn-Situ Synchrotron X-Ray Diffraction of Ti-6Al-4V During Thermomechanical Treatment in the Beta FieldWarchomicka, F., Canelo-Yubero, D., Zehetner, E., Requena, G., Stark, A., Poletti, C. (2019)
In: Metals, Vol. 9, 8, 862. - journal articleIncrease in the Mechanical Strength of Mg-8Gd-3Y-1Zn Alloy Containing Long-Period Stacking Ordered Phases Using Equal Channel Angular Pressing ProcessingGarces, G., Perez, P., Barea, R., Medina, J., Stark, A., Schell, N., Adeva, P. (2019)
In: Metals, Vol. 9, 2, 221. - journal articleEffect of precipitation in the compressive behavior of high strength Mg-Gd-Y-Zn extruded alloyGarces, G., Máthis, K., Barea, R., Medina, J., Pérez, P., Stark, A., Schell, N., Adeva, P. (2019)
In: Materials Science and Engineering A, Vol. 768, 138452. - journal articleStress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffractionMeindlhumer, M., Klima, S., Jäger, N., Stark, A., Hruby, H., Mitterer, C., Keckes, J., Daniel, R. (2019)
In: Scientific Reports, Vol. 9, 18027. - journal articleEffect of heat treatment on the precipitation hardening in FeNiCoAlTaB shape memory alloysChulist, R., Prokopowicz, M., Maziarz, W., Ostachowski, P., Schell, N. (2019)
In: International Journal of Materials Research, Vol. 110, 1, 70-74. - journal articleCold gas spraying of Ti-48Al-2Cr-2Nb intermetallic for jet engine applicationsBakan, E., Mauer, G., Sohn, Y., Schwedt, A., Rackel, M., Riedlberger, F., Pyczak, F., Peters, J., Mecklenburg, M., Gartner, T., Vaßen, R. (2019)
In: Surface and Coatings Technology, Vol. 371, 203-210. - journal articleEx vivo evaluation of an atherosclerotic human coronary artery via histology and high-resolution hard X-ray tomographyBuscema, M., Hieber, S., Schulz, G., Deyle, H., Hipp, A., Beckmann, F., Lobrinus, J., Saxer, T., Müller, B. (2019)
In: Scientific Reports, Vol. 9, 14348. - journal articleSensitivity comparison of absorption and grating-based phase tomography of paraffin-embedded human brain tissueBikis, C., Rodgers, G., Deyhle, H., Thalmann, P., Hipp, A., Beckmann, F., Weitkamp, T., Theocharis, S., Rau, C., Schuluz, G., Müller, B. (2019)
In: Applied Physics Letters, Vol. 114, 8, 083702. - journal articleSpin-wave stiffness of the Dzyaloshinskii-Moriya helimagnet compounds Fe1−xCoxSi studied by small-angle neutron scatteringGrigoriev, S.V., Pschenichnyi, K.A., Altynbaev, E.V., Siegfried, S.-A., Heinemann, A., Honnecker, D., Menzel, D. (2019)
In: Physical Review B, Vol. 100, 9, 094409. - journal articleThe influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminidesBresler, J., Neumeier, S., Ziener, M., Pyczak, F., Göken, M. (2019)
In: Materials Science and Engineering A, Vol. 744, 46-53. - journal articleSite occupancy of alloying elements in the L12 structure determined by channeling enhanced microanalysis in γ/γ’ Co-9Al-9W-2X alloysWang, L., Oehring, M., Liu, Y., Lorenz, U., Pyczak, F. (2019)
In: Acta Materialia, Vol. 162, 176-188. - journal articleUsing neutron methods SANS and PGAA to study evolution of structure and composition of alkali-doped polybenzimidazole membranesBabcock, E., Szekely, N., Konovalova, A., Lin, Y., Appavou, M.-S., Mangiapia, G., Revay, Z.;, Stieghorst, C., Holderer, O., Henkensmeier, D., Lehnert, W., Carmo, M. (2019)
In: Journal of Membrane Science, Vol. 577, 12-19. - journal articleLaser welding of precipitation strengthened Ni-rich NiTiHf high temperature shape memory alloys: Microstructure and mechanical propertiesOliveira, J.P., Schell, N., Zhou, N., Wood, L., Benafan, O. (2019)
In: Materials and Design, Vol. 162, 229-234. - journal articleTexture Gradient in a Rectangular Extruded Al60Mg40 Metal Matrix CompositeSanamar, S., Brokmeier, H.-G., Schell, N. (2019)
In: Metals, Vol. 9, 2, 167. - journal articleBiomimetic hard and tough nanoceramic Ti–Al–N film with self-assembled six-level hierarchyMeindlhumer, M., Zalesak, J., Pitonak, R., Todt, J., Sartory, B., Burghammer, B., Stark, A., Schell, N., Daniel, R., Keckes, J.F., Lessiak, M., Koepf, A., Weissenbacher, R., Keckes, J. (2019)
In: Nanoscale, Vol. 11, 16, 7986-7995. - journal articleDeformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression testsWeissensteiner, I., Petersmann, M., Erdeley, P., Stark, A., Antretter, T., Clemens, H., Maier-Kiener, V. (2019)
In: Acta Materialia, Vol. 164, 272-282. - journal articleThe first fossil free-living late instar larva of Strepsiptera (Insecta)Pohl, H., Hammel, J.U., Richter, A., Beutel, R.G. (2019)
In: Arthropod Systematics and Phylogeny, Vol. 77, 1, 125-140. - journal articleDeformation Mechanisms in Metastable Austenitic TRIP/TWIP Steels under Compressive Load Studied by in situ Synchrotron Radiation DiffractionUllrich, C., Martin, S., Schimpf, C., Stark, A., Schell, N., Rafaja, D. (2019)
In: Advanced Engineering Materials, Vol. 21, 5, 1801101. - journal articleLayered double hydroxide based active corrosion protective sealing of plasma electrolytic oxidation/sol-gel composite coating on AA2024Bouali, A.C., Straumal, E.A., Serdechnova, M., Wieland, D.C.F., Starykevich, M., Blawert, C., Hammel, J.U., Lermontov, S.A., Ferreira, M.G.S., Zheludkevich, M.L. (2019)
In: Applied Surface Science, Vol. 494, 829-840. - journal articleCarbon Redistribution Process in Austempered Ductile Iron (ADI) During Heat Treatment—APT and Synchrotron Diffraction StudyLi, X., Wagner, J.N., Stark, A., Koos, R., Landesberger, M., Hofmann, M., Fan, G., Gan, W., Petry, W. (2019)
In: Metals, Vol. 9, 7, 789. - journal articleIn-situ investigation of the oxidation behavior of metastable CVD-Ti1-xAlxN using a novel combination of synchrotron radiation XRD and DSCSaringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C., Schalk, N. (2019)
In: Surface and Coatings Technology, Vol. 374, 617-624. - journal articleFormation of maghemite nanostructures in polyol: tuning the particle size via the precursor stoichiometryWetegrove, M., Witte, K., Bodnar, W., Phahl, D.-E., Springer, A., Schell, N., Westphal, F., Burkel, E. (2019)
In: CrystEngComm, Vol. 21, 12, 1956-1966. - journal articleMeasurement error in μCT‐based three‐dimensional geometric morphometrics introduced by surface generation and landmark data acquisitionEngelkes, K., Helfsgott, J., Hammel, J.U., Buesse, S., Kleinteich, T., Beerlink, A., Gorb, S.N., Haas, A. (2019)
In: Journal of Anatomy, Vol. 235, 2, 357-378. - journal articleBranching of {110) twin boundaries in five-layered Ni-Mn-Ga bent single crystalsChulist, R., Straka, L., Seiner, H., Sozinov, A., Schell, N., Tokarski, T. (2019)
In: Materials and Design, Vol. 171, 107703. - journal articleThe role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4VHaubrich, J., Gussone, J., Barriobero-Vila, P., Kuernsteiner, P., Jaegle, E.A., Raabe, D., Schell, N., Requena, G. (2019)
In: Acta Materialia, Vol. 167, 136-148. - journal articleNanostructured Low Carbon Steels Obtained from the Martensitic State via Severe Plastic Deformation, Precipitation, Recovery, and RecrystallizationMueller, T., Bachmeier, A., Stark, A., Schell, N., Pippan, R. (2019)
In: Advanced Engineering Materials, Vol. 21, 1, 1800202. - journal articleIn-Situ Synchrotron Profile Analysis after High-Pressure Torsion DeformationKerber, M., Spieckermann, F., Schuster, R., Joni, B., Schell, N., Schafler, E. (2019)
In: Crystals, Vol. 9, 5, 232. - journal articleCoherent charge and magnetic ordering in Ho/Y superlattice revealed by element-selective x-ray scatteringUkleev, V., Tarnavich, V., Tartakovskaya, E., Lott, D., Kapaklis, V., Oleshkevych, A., Gargiani, P., Valvidares, M., White, J., Grigoriev, S.; (2019)
In: Physical Review B, Vol. 100, 13, 134417. - journal articleIncreasing skyrmion stability in Cu2OSeO3 by chemical substitutionSukhanov, A.S., Vir, P., Cameron, A.S., Wu, H.C., Martin, N., Mühlbauer, S., Heinemann, A., Yang, H.D., Felser, C., Inosov, D.S. (2019)
In: Physical Review B, Vol. 100, 18, 184408. - journal articleThe transient liquid phase bonding process of a γ-TiAl alloy with brazing solders containing Fe or NiHauschildt, K., Stark, A., Schell, N., Mueller, M., Pyczak, F. (2019)
In: Intermetallics, Vol. 106, 48-58. - journal articleIn situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solutionErdely, P., Staron, P., Stark, A., Klein, T., Clemens, H., Mayer, S. (2019)
In: Acta Materialia, Vol. 164, 110-121. - journal articleResidual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verificationBrunbauer, S., Winter, G., Antretter, T., Staron, P., Ecker, W. (2019)
In: Materials Science and Engineering A, Vol. 747, 73-79. - journal articleInterfacial Phenomena between Liquid Ga-Based Alloys and Ni SubstrateGancarz, T., Berent, K., Schell, N., Chulist, R. (2019)
In: Journal of Electronic Materials, Vol. 48, 9, 5941-5947. - journal articleCorrosion behavior of metal–composite hybrid joints: Influence of precipitation state and bonding zonesAndre, N.M., Bouali, A., Maawad, E., Staron, P., dos Santos, J.F., Zheludkevich, M.L., Amancio-Filho, S.T. (2019)
In: Corrosion Science, Vol. 158, 108075. - journal articleImpact of Symmetry on Anisotropic Magnetoresistance in Textured Ferromagnetic Thin FilmsPhilippi-Kobs, A., Farhadi, A., Matheis, L., Lott, D., Chuvilin, A., Oepen, H.P. (2019)
In: Physical Review Letters, Vol. 123, 13, 137201. - journal articleMicrostructure, phase stability and element partitioning of γ-γ′ Co-9Al-9W-2X alloys in different annealing conditionsWang, L., Oehring, M., Li, Y., Song, L., Liu, Y., Stark, A., Lorenz, U., Pyczak, F. (2019)
In: Journal of Alloys and Compounds, Vol. 787, 594-605. - journal articleDecomposition routes and strain evolution in arc deposited TiZrAlN coatingsRogstroem, L., Johannson Joesaar, M.P., Pilemalm, R., Ghafoor, N., Johnson, L.J.S., Schell, N., Oden, M. (2019)
In: Journal of Alloys and Compounds, Vol. 779, 261-269. - journal articleObservation of a Chirality-Induced Exchange-Bias EffectChen, K., Philippi-Kobs, A., lauter, V., Vorobiev, A., Dyadkina, E., Yakovchuk, V.Y., Stolyar, S., Lott, D. (2019)
In: Physical Review Applied, Vol. 12, 2, 024047. - journal articleIn Situ Structural Characterization of Functionally Graded Ni–Ti Shape Memory Alloy During Tensile LoadingBraz Fernandes, F., Camacho, E., Rodrigues, P., Inacio, P., Santos, T., Schell, N. (2019)
In: Shape Memory and Superelasticity, Vol. 5, 457-467. - journal articleA custom built lathe designed for in operando high-energy x-ray studies at industrially relevant cutting parametersRogström, L., Chen, Y., Johansson Jöessaar, M., Eriksson, J., Fallqvist, M., Andersson, J., Schell, N., Oden, M., Birch, J. (2019)
In: Review of Scientific Instruments, Vol. 90, 10, 103901. - journal articleEvidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopyMusi, M., Erdely, P., Rashkova, B., Clemens, H., Stark, A., Staron, P., Schell, N., Mayer, S. (2019)
In: Materials Characterization, Vol. 147, 398-405. - journal articleFerrite recrystallization and austenite formation during annealing of cold-rolled advanced high-strength steels: In situ synchrotron X-ray diffraction and modelingBellavoine, M., Dumont, M., Dehmas, M., Stark, A., Schell, N., Drillet, J., Hébert, V., Maugis, P. (2019)
In: Materials Characterization, Vol. 154, 20-30. - journal articleEvidence for deformation twinning of the D019-α2 phase in a high Nb containing TiAl alloySong, L., Wang, L., Oehring, M., Hu, X., Appel, F., Lorenz, U., Pyczak, F., Zhang, T. (2019)
In: Intermetallics, Vol. 109, 91-96. - journal articleEvolution of texture in precision seamless tubes investigated by synchrotron and neutron radiation measurementFoadian, F., Carradó, A., Brokmeier, H.G., Gan, W.M., Schell, N., Al-Hamdany, N., Palkowski, H. (2019)
In: Materials Characterization, Vol. 151, 582-589. - journal articleNew methylpyridinium ionic liquids – Influence of the position of –CH3 group on physicochemical and structural propertiesVraneš, M., Papović, S., Idrissi, A., Zec, N., Panaget, T., Ajduković, J., Gadžurić, S. (2019)
In: Journal of Molecular Liquids, Vol. 283, 208-220. - journal articleMorphology Tuning of ZnO/P3HT/P3HT-b-PEO Hybrid Films Deposited via Spray or Spin CoatingWang, K., Hohn, N., Kreuzer, L., Widmann, T., Haese, M., Moulin, J., Müller-Buschbaum, P. (2019)
In: ACS Applied Materials and Interfaces, Vol. 11, 11, 10998-11005. - journal articleHydration and Solvent Exchange Induced Swelling and Deswelling of Homogeneous Poly(N-isopropylacrylamide) Microgel Thin FilmsWidmann, T., Kreuzer, L.P., Hohn, N., Bießmann, L., Wang, K., Rinner, S., Moulin, J.-F., Schmid, A.J., Hannappel, Y., Wrede, O., Kühnhammer, M., Hellweg, T., Von Klitzing, R., Müller-Buschbaum, P. (2019)
In: Langmuir, Vol. 35, 49, 16341-16352. - journal articleFabrication, microstructure and mechanical properties of the as-rolled ZW31/PMMCs laminateZhang, X.-C., Wang, C.-J., Deng, K.-K., Nie, K.-B., Gan, W.-M., Liang, W., Wu, Y.-C. (2019)
In: Materials Science and Engineering: A, Vol. 761, 138043. - journal articleDiffraction-based determination of single-crystal elastic constants of polycrystalline titanium alloysHeldmann, A., Hoelzel, M., Hofmann, M., Gan, W., Schmahl, W.W., Griesshaber, E., Hansen, T., Schell, N., Petrya, W. (2019)
In: Journal of Applied Crystallography, Vol. 52, 5, 1144-1156. - journal articleDefect-rich GaN interlayer facilitating the annihilation of threading dislocations in polar GaN crystals grown on (0001)-oriented sapphire substratesBarchuk, M., Motylenko, M., Schneider, T., Förste, M., Röder, C., Davydok, A., Lazarev, S., Schimpf, C., Wüstefeld, C., Pätzold, O., Rafaja, D. (2019)
In: Journal of Applied Physics, Vol. 126, 8, 085301. - journal articleEffect of Applied Compressive Stress and Impregnation Material on Internal Strain and Stress State in Nb3Sn Rutherford Cable StacksWolf, F., Scheuerlein, C., Lorentzon, M., Katzer, B., Hofmann, M., Gan, W., Lackner, F., Schoerling, D., Tommasini, D., Savary, F., Bottura, L. (2019)
In: IEEE Transactions on Applied Superconductivity, Vol. 29, 5, 8400605. - journal articleStrain and stress analyses on thermally annealed Ti-Al-N/Mo-Si-B multilayer coatings by synchrotron X-ray diffractionAschauer, E., Bartosik, M., Bolvardi, H., Arndt, M., Polcik, P., Davydok, A., Krywka, C., Riedl, H., Mayrhofer, P.H. (2019)
In: Surface and Coatings Technology, Vol. 361, 364-370. - journal article20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastificationGruber, D., Kiefer, D., Rössler, R., Beckmann, F., Tkadletz, M., Klünsner, T., Czettl, C., Keckes, J., Gibmeier, J. (2019)
In: International Journal of Refractory Metals and Hard Materials, Vol. 82, 121-128. - journal articleIdentification of Laves phases in a Zr or Hf containing γ-γ′ Co-base superalloyWang, L., Song, L., Stark, A., Liu, Y., Oehring, M., Lorenz, U., Pyczak, F. (2019)
In: Journal of Alloys and Compounds, Vol. 805, 880-886. - journal articleHierarchical supercrystalline nanocomposites through the self-assembly of organically-modified ceramic nanoparticlesDomènech, B., Kampferbeck, M., Larsson, E., Krekeler, T., Bor, B., Giuntini, D., Blankenburg, M., Ritter, M., Müller, M., Vossmeyer, T., Weller, H., Schneider, G.A. (2019)
In: Scientific Reports, Vol. 9, 1, 3435. - journal articleHierarchical architecture of spider attachment setae reconstructed from scanning nanofocus X-ray diffraction dataSchaber, C., Flenner, S., Glisovic, A., Krasnov, I., Rosenthal, M., Stieglitz, H., Krywka, C., Burghammer, M., Müller, M., Gorb, S. (2019)
In: Journal of the Royal Society Interface, Vol. 16, 150, 20180692. - journal articleTexture in Superconducting Magnet Constituent Materials and Its Effect on Elastic AnisotropyScheuerlein, C., Gan, W., Hofmann, M., Katzer, B. (2019)
In: IEEE Transactions on Applied Superconductivity, Vol. 29, 5, 7800105. - journal articleHot deformation behavior originated from dislocation activity and β to α phase transformation in a metastable β titanium alloyHua, K., Zhang, Y., Gan, W., Kou, H., Beausir, B., Li, J., Esling, C. (2019)
In: International Journal of Plasticity, Vol. 119, 200-214. - journal articleGiant enhancement of the skyrmion stability in a chemically strained helimagnetSukhanov, A.S., Vir, P., Heinemann, A., Nikitin, S.E., Kriegner, D., Borrmann, H., Shekhar, C., Felser, C., Inosov, D.S. (2019)
In: Physical Review B, Vol. 100, 18, 180403. - journal articleCeramic-Reinforced γ-TiAl-Based Composites: Synthesis, Structure, and PropertiesLazurenko, D., Stark, A., Esikov, M., Paul, J., Bataev, I., Kashimbetova, A., Mali, V., Lorenz, U., Pyczak, F. (2019)
In: Materials, Vol. 12, 4, 629. - journal articleHigh strength nanocrystalline Cu–Co alloys with high tensile ductilityBachmaier, A., Rathmayr, G., Schmauch, J., Schell, N., Stark, A., de Jonge, N., Pippan, R. (2019)
In: Journal of Materials Research, Vol. 34, 1, 58-68. - journal articleNeutron diffraction measurement of residual stresses in an ITER-like tungsten-monoblock type plasma-facing componentCoppola, R., Crescenzi, F., Gan, W., Hofmann, M., Li, M., Visca, E., You, J.-H. (2019)
In: Fusion Engineering and Design, Vol. 146, Part A, 701-704. - journal articleEnhanced tensile plasticity of a CuZr-based bulk metallic glass composite induced by ion irradiationXue, P., Pauly, S., Gan, W., Jiang, S., Fan, H., Ning, Z., Huang, Y., Sun, J. (2019)
In: Journal of Materials Science & Technology, Vol. 35, 10, 2221-2226. - journal articleNon-destructive Neutron Surface Residual Stress AnalysisRebelo Kornmeier, J., Hofmann, M., Gan, W.M., Gibmeier, J., Saroun, J. (2019)
In: Journal of Nondestructive Evaluation, Vol. 38, 3, 79. - journal articleSwelling and Exchange Behavior of Poly(sulfobetaine)-Based Block Copolymer Thin FilmsKreuzer, L.P., Widmann, T., Hohn, N., Wang, K., Bießmann, L., Peis, L., Moulin, J.-F., Hildebrand, V., Laschewsky, A., Papadakis, C.M., Müller-Buschbaum, P. (2019)
In: Macromolecules, Vol. 52, 9, 3486-3498. - journal articleDeformation of Ni–Mn-Ga 7M modulated martensite through detwinning/twinning and forward/reverse intermartensitic transformation studied by in-situ neutron diffraction and interrupted in-situ EBSDZou, N., Li, Z., Zhang, Y., Gan, W., Yang, B., Zhao, X., Esling, C., Hofmann, M., Zuo, L. (2019)
In: Acta Materialia, Vol. 174, 319-331. - journal articlePutative spin-nematic phase in BaCdVO(PO4)2Skoulatos, M., Rucker, F., Nilsen, J., Bertin, A., Pomjakushina, E., Ollivier, J., Pfleiderer, C., Schneidewind, A., Georgii, R., Rüegg, C., Zaharko, O., Keller, L., Shannon, N., Schmidt, B., Kriele, A., Senyshyn, A., Smerald, A. (2019)
In: Physical Review B, Vol. 100, 1, 014405. - journal articleHot extrusion approach to enhance the cyclic stability of elastocaloric effect in polycrystalline Ni-Mn-Ga alloysWei, L., Zhang, X., Gan, W., Ding, C., Geng, L. (2019)
In: Scripta Materialia, Vol. 168, 28-32. - journal articleEffects of welding speed on the multiscale residual stresses in friction stir welded metal matrix compositesZhang, X.X., Wu, L.H., Andrä, H., Gan, W.M., Hofmann, M., Wang, D., Ni, D.R., Xiao, B.L., Ma, Z.Y. (2019)
In: Journal of Materials Science & Technology, Vol. 35, 5, 824-832.
2018
- journal articleTexture and microstructure of HPT-processed Fe-based shape memory alloysChulist, R., Czerny, M., Panigrahi, A., Zehetbauer, M., Schell, N., Skrotzki, W. (2018)
In: IOP Conference Series: Materials Science and Engineering, Vol. 375, 012006. - journal articleLattice and phase strain evolution during tensile loading of an intermetallic, multi-phase Gamma-TiAl based alloyErdely, P., Staron, P., Maawad, E., Schell, N., Clemens, H., Mayer, S. (2018)
In: Acta Materialia, Vol. 158, 193-205. - journal articleInsights into interactions between 1-butyl-3-methylimidazolium dicyanamide and molecular solvents: γ-valerolactone, γ-butyrolactone and propylene carbonate. Volumetric properties and MD simulationsZec, N., Idrissi, A., Bester-Rogac, M., Vranes, M., Gadzuric, S. (2018)
In: Journal of Molecular Liquids, Vol. 268, 481-489. - journal articleNew insights into perovskite-Ti3AlC precipitate splitting in a Ti-45Al-5Nb-0.75C alloy by transmission electron microscopyWang, L., Oehring, M., Lorenz, U., Stark, A., Pyczak, F. (2018)
In: Intermetallics, Vol. 100, 70-76. - journal articleRafting of Gamma′ precipitates in a Co-9Al-9W superalloy during compressive creepLi, Y., Pyczak, F., Paul, J., Oehring, M., Lorenz, U., Yao, Z., Ning, Y. (2018)
In: Materials Science and Engineering A, Vol. 719, 43-48. - journal articlePeritectic titanium alloys for 3D printingBarriobero-Vila, P., Gussone, J., Stark, A., Schell, N., Haubrich, J., Requena, G. (2018)
In: Nature Communications, Vol. 9, 3426. - journal articleResidual stresses and fatigue crack growth in friction surfacing coated Ti-6Al-4V sheetsDovzhenko, G., Hanke, S., Staron, P., Maawad, E., Schreyer, A., Horstmann, M. (2018)
In: Journal of Materials Processing Technology, Vol. 262, 104-110. - journal articleElemental Segregation and O-Phase Formation in a Gamma-TiAl AlloyGabrisch, H., Krekeler, T., Lorenz, U., Rackel, M., Ritter, M., Pyczak, F., Stark, A. (2018)
In: Materials Science Forum, THERMEC 2018, Vol. 941, 741-746. - journal articleSurface Modification of 304 Stainless Steel by Electro-Spark DepositionJiao, Z., Peterkin, S., Felix, L., Liang, R., Oliveira, J.P., Schell, N., Scotchmer, N., Toyserkani, E., Zhou, Y. (2018)
In: Journal of Materials Engineering and Performance, Vol. 27, 9, 4799-4809. - journal articleInvestigation of single phase Cu2ZnSnxSb1−xS4 compounds processed by mechanochemical synthesisNeves, F., Stark, A., Schell, N., Mendes, M.J., Aguas, H., Fortunato, E., Martins, R., Correia, J.B., Joyce, A. (2018)
In: Physical Review Materials, Vol. 2, 7, 075404. - journal articleStructural and molecular response in cyclodextrin-based pH-sensitive hydrogels by the joint use of Brillouin, UV Raman and Small Angle Neutron Scattering techniquesRossi, B., Bottari, C., Comez, L., Corezzi, S., Paolantoni, M., Gessini, A., Masciovecchio, C., Mele, A., Punta, C., Melone, L., Fiorati, A., Radulescu, A., Mangiapia, G., Paciaroni, A. (2018)
In: Journal of Molecular Liquids, Vol. 271, 738-746. - journal articleSynchrotron X-ray imaging of a dichasium cupule of Castanopsis from Eocene Baltic amberSadowski, E.-M., Hammel, J.U., Denk, T. (2018)
In: American Journal of Botany, Vol. 105, 12, 2025-2036. - journal articlePropagation-based phase-contrast tomography of a guinea pig inner ear with cochlear implant using a model-based iterative reconstruction algorithmHehn, L., Gradl, R., Voss, A., Guenther, B., Dierolf, M., Jud, C., Willer, K., Allner, S., Hammel, J.U., Hessler, R., Morgan, K.S., Herzen, J., Hemmert, W., Pfeiffer, F. (2018)
In: Biomedical Optics Express, Vol. 9, 11, 5330-5339. - journal articleEffects of laser processing on the transformation characteristics of NiTi: A contribute to additive manufacturingOliveira, J.P., Cavaleiro, A.J., Schell, N., Stark, A., Miranda, R.M., Ocana, J.L., Braz Fernandes, F.M. (2018)
In: Scripta Materialia, Vol. 152, 122-126. - journal articleInfluence of alloying additions on L12 decomposition in Gamma-Gamma′ Co-9Al-9W-2X quaternary alloysWang, L., Oehring, M., Lorenz, U., Yang, J., Pyczak, F. (2018)
In: Scripta Materialia, Vol. 154, 176-181. - journal articleInfluence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy AlloySchuh, B., Voelker, B., Todt, J., KormoutK.S., Schell, N., Hohenwarter, A. (2018)
In: Materials, Vol. 11, 5, 662. - journal articleA simple setup for episcopic microtomy and a digital image processing workflow to acquire high-quality volume data and 3D surface models of small vertebratesEngelkes, K., Friedrich, F., Hammel, J.U., Haas, A. (2018)
In: Zoomorphology, Vol. 137, 1, 213-228. - journal articleQuantitative characterization of degradation processes in situ by means of a bioreactor coupled flow chamber under physiological conditions using time-lapse SRMueCTZeller-Plumhoff, B., Helmholz, H., Feyerabend, F., Dose, T., Wilde, F., Hipp, A., Beckmann, F., Willumeit-Roemer, R., Hammel, J. (2018)
In: Materials and Corrosion, Vol. 69, 3, 298-306. - journal articleThermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical propertiesSchuh, B., Voelker, B., Todt, J., Schell, N., Perriere, L., Li, J., Couzinie, J.P., Hohenwarter, A. (2018)
In: Acta Materialia, Vol. 142, 201-212. - journal articleIn situ analysis of PCBN cutting tool materials during thermo-mechanical loading using synchrotron radiationProes, F., Eichenseer, C., Hintze, W., Schell, N., Leahy, W., M´Saoubi, R., Sattel, S. (2018)
In: Production Engineering, Vol. 12, 3-4, 535-546. - journal articleEvaluation of contrasting techniques for X-ray imaging of velvet worms (Onychophora)Jahn, H., de Sena Oliveira, I., Gross, V., Martin, C., Hipp, A., Mayer, G., Hammel, J.U. (2018)
In: Journal of Microscopy (Oxford), Vol. 270, 3, 343-358. - journal articleHigh-strength Mg-6Zn-1Y-1Ca (wt%) alloy containing quasicrystalline I-phase processed by a powder metallurgy routeMedina, J., Perez, P., Garces, G., Stark, A., Schell, N., Adeva, P. (2018)
In: Materials Science and Engineering A, Vol. 715, 92-100. - journal articleWetting of Sn-Zn-Ga and Sn-Zn-Na Alloys on Al and Ni SubstrateGancarz, T., Bobrowski, P., Pawlak, S., Schell, N., Chulist, R., Janik, K. (2018)
In: Journal of Electronic Materials, Vol. 47, 1, 49-60. - journal articleArachnids in Bitterfeld amber: A unique fauna of fossils from the heart of Europe or simply old friends?Dunlop, J.A., Kotthoff, U., Hammel, J.U., Ahrens, J., Harms, D. (2018)
In: Evolutionary Systematics, Vol. 2, 1, 31-44. - journal articleDislocation dipole-induced strengthening in intermetallic TiAlHe, Y., Liu, Z., Zhou, G., Wang, H., Bai, C., Rodney, D., Appel, F., Xu, D., Yang, R. (2018)
In: Scripta Materialia, Vol. 143, 98-102. - journal articleA synchrotron X-ray and electron backscatter diffraction based investigation on deformation and failure micro-mechanisms of monotonic and cyclic loading in titaniumGhosh, A., Brokmeier, H.-G., Al-Hamdany, N., Sinha, S., Schell, N., Gurao, N. (2018)
In: Materials Science and Engineering A, Vol. 726, 143-153. - journal articleMultiscale process simulation of residual stress fields of laser beam welded precipitation hardened AA6082Herrnring, J., Staron, P., Kashaev, N., Klusemann, B. (2018)
In: Materialia, Vol. 3, 243-255. - journal articleEnergy-Efficient Elastocaloric Cooling by Flexibly and Reversibly Transferring Interface in Magnetic Shape-Memory AlloysLi, Y., Zhao, D., Liu, J., Qian, S., Gan, W., Chen, X. (2018)
In: ACS Applied Materials and Interfaces, Vol. 10, 30, 25438-25445. - journal articleThe effect of residual stresses and strain reversal on the fracture toughness of TiAl alloysAppel, F., Paul, J.D.H., Staron, P., Oehring, M., Kolednik, O., Predan, J., Fischer, F.D. (2018)
In: Materials Science and Engineering A, Vol. 709, 17-29. - journal articleGradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffractionTodt, J., Keckes, J., Winter, G., Staron, P., Hohenwarter, A. (2018)
In: Scripta Materialia, Vol. 146, 178-181. - journal articleA method for the in-situ study of solid-state joining techniques using synchrotron radiation - observation of phase transformations in Ti-6Al-4V after friction surfacingHanke, S., Staron, P., Fischer, T., Fitseva, V., dos Santos, J.F. (2018)
In: Surface and Coatings Technology, Vol. 335, 355-367. - journal articleSevere Plastic Deformation by Equal Channel Angular Pressing and Rolling: The Influence of the Deformation Path on Strain DistributionKliauga, A.M., Sordi, V.L., De Viincentis, N.S., Bolmaro, R.E., Schell, N., Brokmeier, H.-G. (2018)
In: Advanced Engineering Materials, Vol. 20, 4, 1700055. - journal articlePhase Transformations in the Brazing Joint during Transient Liquid Phase Bonding of a Gamma-TiAl Alloy Studied with In Situ High-Energy X-Ray DiffractionHauschildt, K., Stark, A., Burmester, H., Tietze, U., Schell, N., Mueller, M., Pyczak, F. (2018)
In: Materials Science Forum, THERMEC 2018, Vol. 941, 943-948. - journal articleAn in situ investigation of the deformation mechanisms in a Beta-quenched Ti-5Al-5V-5Mo-3Cr alloyBarriobero-Vila, P., Gussone, J., Kelm, K., Haubrich, J., Stark, A., Schell, N., Requena, G. (2018)
In: Materials Science and Engineering A, Vol. 717, 134-143. - journal articleFormation of block-copolymer-templated mesoporous silicaBjoerk, E.M., Maekie, P., Rogstroem, L., Atakan, A., Schell, N., Oden, M. (2018)
In: Journal of Colloid and Interface Science, Vol. 521, 183-189. - journal articleRole of layered structure in ductility improvement of layered Ti-Al metal compositeHuang, M., Xu, C., Fan, G., Maawad, E., Gan, W., Geng, L., Lin, F., Tang, G., Wu, H., Du, Y., Li, D., Miao, K., Zhang, T., Yang, X., Xia, Y., Cao, G., Kang, H., Wang, T., Xiao, T., Xie, H. (2018)
In: Acta Materialia, Vol. 153, 235-249. - journal articleIn Vitro Model of the Gram-Negative Bacterial Cell Envelope for Investigation of Anti-Infective Permeation KineticsGraef, F., Richter, R., Fetz, V., Murgia, X., De Rossi, C., Schneider-Daum, N., Allegretta, G., Elgaher, W., Haupenthal, J., Empting, M., Beckmann, F., Broenstrup, M., Hartmann, R., Gordon, S., Lehr, C.-M. (2018)
In: ACS Infectious Diseases, Vol. 4, 8, 1188-1196. - journal articleThe influence of n-hexanol on the morphology and composition of CTAB micellesSchmutzler, T., Schindler, T., Schmiele, M., Appavou, M., Lagesa, S., Kriele, A., Gilles, R., Unruh, T. (2018)
In: Colloids and Surfaces A, Vol. 543, 56-63. - journal articleInfluence of quasicrystal I-phase on twinning of extruded Mg-Zn-Y alloys under compressionGarces, G., Medina, J., Perez, P., Mathis, K., Horvath, K., Stark, A., Schell, N., Adeva, P. (2018)
In: Acta Materialia, Vol. 151, 271-281. - journal articleExperimental and numerical investigation of residual stresses in laser shock peened AA2198Keller, S., Chupakhin, S., Staron, P., Maawad, E., Kashaev, N., Klusemann, B. (2018)
In: Journal of Materials Processing Technology, Vol. 255, 294-307. - journal articleEffect of cationic structure of surface active ionic liquids on their micellization: A thermodynamic studyCobanov, I., Sarac, B., Medos, Z., Vranes, M., Gadzuric, S., Zec, N., Bester-Rogac, M. (2018)
In: Journal of Molecular Liquids, Vol. 271, 437-442. - journal articleStrain-Induced Martensitic Transformation Kinetic in Austempered Ductile Iron (ADI)Li, X.H., Saal, P., Gan, W.M., Hoelzel, M., Volk, W., Petry, W., Hofmann, M. (2018)
In: Metallurgical and Materials Transactions A, Vol. 49, 1, 94-104. - journal articleCrystallographic texture gradient along the wall thickness of an SF-copper tubeAl-Hamdany, N., Brokmeier, H.-G., Salih, M., Zhong, Z., Schwebke, B., Schell, N., Gan, W. (2018)
In: Materials Characterization, Vol. 139, 125-133. - journal articleCrystallographic texture and lattice strain evolution during tensile load of swaged brassAl-Hamdany, N., Brokmeier, H.-G., Gan, W. (2018)
In: Materials Science and Engineering: A, Vol. 711, 149-155. - journal articleRetraction of the dissolution front in natural porous mediaYang, Y., Bruns, S., Rogowska, M., Hakim, S.S., Hammel, J.U., Stipp, S.L.S., Soerensen, H.O. (2018)
In: Scientific Reports, Vol. 8, 5693. - journal articleCorrelation Between the Microstructural Defects and Residual Stress in a Single Crystal Nickel-Based Superalloy During Different Creep StagesMo, F., Wu, E., Zhang, C., Wang, H., Zhong, Z., Zhang, J., Chen, B., Hofmann, M., Gan, W., Sun, G. (2018)
In: Metals and Materials International, Vol. 24, 5, 1002-1011. - journal articleThe metallurgical texture of gold artefacts found at the Bronze Age rampart of Bernstorf (Bavaria) studied by neutron diffractionWagner, F.E., Gebhard, R., Gan, W., Hofmann, M. (2018)
In: Journal of Archaeological Science: Reports, Vol. 20, 338-346. - journal articleCorrelation between imposed deformation and transformation lattice strain on α variant selection in a metastable β-Ti alloy under isothermal compressionHua, K., Zhang, Y., Gan, W., Kou, H., Li, J., Esling, C. (2018)
In: Acta Materialia, Vol. 161, 150-160. - journal articleHeat-treatment induced defect formation in α-Al matrix in Sr-modified eutectic Al–Si alloyLiu, X., Beausir, B., Zhang, Y., Gan, W., Yuan, H., Yu, F., Esling, C., Zhao, X., Zuo, L. (2018)
In: Journal of Alloys and Compounds, Vol. 730, 208-218. - journal articleRapid measurement of volumetric texture using resonant ultrasound spectroscopyLan, B., Carpenter, M.A., Gan, W., Hofmann, M., Dunne, F.P.E., Lowe, M.J.S. (2018)
In: Scripta Materialia, Vol. 157, 44-48. - journal articleDirect volumetric measurement of crystallographic texture using acoustic wavesLan, B., Britton, T., Jun, T., Gan, W., Hofmann, M., Dunne, F., Lowe, M. (2018)
In: Acta Materialia, Vol. 159, 384-394. - journal articlePhotonic materials for high-temperature applications: Synthesis and characterization by X-ray ptychographic tomographyFurlan, K., Larsson, E., Diaz, A., Holler, M., Krekeler, T., Ritter, M., Petrov, A., Eich, M., Blick, R., Schneider, G., Greving, I., Zierold, R., Janßen, R. (2018)
In: Applied Materials Today, Vol. 13, 359-369. - journal articleDirect Observation of Coupled Geochemical and Geomechanical Impacts on Chalk Microstructure Evolution under Elevated CO2 PressureYang, Y., Hakim, S., Bruns, S., Rogowska, M., Boehnert, S., Hammel, J., Stipp, S., Sørensen, H. (2018)
In: ACS Earth and Space Chemistry, Vol. 2, 6, 618-633. - journal articleIn Situ Characterization at Elevated Temperatures of a New Ni-Based Superalloy VDM-780 PremiumSolis, C., Munke, J., Bergner, M., Kriele, A., Muehlbauer, M.J., Cheptiakov, D.V., Gehrmann, B., Roesler, J., Gilles, R. (2018)
In: Metallurgical and Materials Transactions A, Vol. 49, 9, 4373-4381. - journal articleElectrodeposited Na2Ni[Fe(CN)6] Thin-Film Cathodes Exposed to Simulated Aqueous Na-Ion Battery ConditionsMarzak, P., Yun, J., Dorsel, A., Kriele, A., Gilles, R., Schneider, O., Bandarenka, A.S. (2018)
In: The Journal of Physical Chemistry C, Vol. 122, 16, 8760-8768. - journal articleUnderstanding precipitate evolution during friction stir welding of Al-Zn-Mg-Cu alloy through in-situ measurement coupled with simulationdos Santos, J.F., Staron, P., Fischer, T., Robson, J.D., Kostka, A., Colegrove, P., Wang, H., Hilgert, J., Bergmann, L., Huetsch, L.L., Huber, N., Schreyer, A. (2018)
In: Acta Materialia, Vol. 148, 163-172. - journal articleConductivity and Morphology Correlations of Ionic-Liquid/Lithium-Salt/Block Copolymer Nanostructured Hybrid ElectrolytesMetwalli, E., Kaeppel, M.V., Schaper, S.J., Kriele, A., Gilles, R., Raftopoulos, K.N., Mueller-Buschbaum, P. (2018)
In: ACS Applied Energy Materials, Vol. 1, 2, 666-675. - journal articleCreep deformation of Co-Re-Ta-C alloys with varying C content–investigated in-situ by simultaneous synchrotron radiation diffractionKarge, L., Gilles, R., Mukherji, D., Stark, A., Beran, P., Schell, N., Hofmann, M., Strunz, P., Haeusler, J., Roesler, J (2018)
In: Materials Science and Engineering A, Vol. 719, 124-131. - journal articleSynthesis of metal-intermetallic laminate (MIL) composites with modified Al3Ti structure and in situ synchrotron X-ray diffraction analysis of sintering processLazurenko, D.V., Bataev, I.A., Mali, V.I., Jorge, A.M.jr, Stark, A., Pyczak, F., Ogneva, T.S., Maliutina, I.N. (2018)
In: Materials and Design, Vol. 151, 8-16. - journal articleCapillary condensation and gelling of microemulsions with clay additivesGvaramia, M., Mangiapia, G., Falus, P., Ohl, M., Holderer, O., Frielinghaus, H. (2018)
In: Journal of Colloid and Interface Science, Vol. 525, 161-165. - journal articleNitrogen transport through thermally grown chromia scalesSolimani, A., Schuetze, M., Stark, A., Galetz, M.C. (2018)
In: Corrosion Science, Vol. 145, 180-190. - journal articleThe Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced DensityFreund, L.P., Stark, A., Kirchmayer, A., Schell, N., Pyczak, F., Goeken, M., Neumeier, S. (2018)
In: Metallurgical and Materials Transactions A, Vol. 49, 9, 4070-4078. - journal articleThe grain boundary pinning effect of the Mue phase in an advanced polycrystalline Gamma/Gamma′ Co-base superalloyFreund, L.P., Stark, A., Pyczak, F., Schell, N., Goeken, M., Neumeier, S. (2018)
In: Journal of Alloys and Compounds, Vol. 753, 333-342. - journal articleStrain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous coolingReisinger, S., Kozeschnik, E., Ressel, G., Keckes, J., Stark, A., Marsoner, S., Ebner, R. (2018)
In: Materials and Design, Vol. 155, 475-484.
2017
- journal articleDesign and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloyErdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H., Mayer, S. (2017)
In: Materials and Design, Vol. 131, 286-296. - journal articleThermal and mechanical stability of wurtzite-ZrAlN/cubic-TiN and wurtzite-ZrAlN/cubic-ZrN multilayersChen, Y.H., Rogstroem, L., Roa, J.J., Zhu, J.Q., Schramm, I.C., Johnson, L.J.S., Schell, N., Muecklich, F., Anglada, M.J., Oden, M. (2017)
In: Surface and Coatings Technology, Vol. 324, 328-337. - journal articleMicrostructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded CladsFronczek, D.M., Chulist, R., Litynska-Dobrzynska, L., Lopez, G.A., Wierzbicka-Miernik, A., Schell, N., Szulc, Z., Wojewoda-Budka, J. (2017)
In: Metallurgical and Materials Transactions A, Vol. 48, 9, 4154-4165. - journal articleFormation of a quasicrystalline phase in Al–Mn base alloys cast at intermediate cooling ratesStan-Glowinska, K., Rogal, L., Goral, A., Wierzbicka-Miernik, A., Wojewoda-Budka, J., Schell, N., Litynska-Dobrzynska, L. (2017)
In: Journal of Materials Science, Vol. 52, 13, 7794-7807. - journal articleEffects of decomposition route and microstructure on h-AlN formation rate in TiCrAlN alloysChen, Y,H., Rogstroem, L., Ostach, D., Ghafoor, N., Johasson-Joesaar, M.P., Schell, N., Birch, J., Oden, M. (2017)
In: Journal of Alloys and Compounds, Vol. 691, 1024-1032. - journal articleThermal stability of Gamma′ phase in long-term aged Co-Al-W alloysLi, Y., Pyczak, F., Oehring, M., Wang, L., Paul, J., Lorenz, U., Yao, Z. (2017)
In: Journal of Alloys and Compounds, Vol. 729, 266-276. - journal articleStructure-activity relationships in carbohydrates revealed by their hydrationMaugeri, L., Busch, S., McLain, S.E., Pardo, L.C., Bruni, F., Ricci, M.A. (2017)
In: Biochimica et Biophysica Acta: BBA General Subjects, Vol. 1861, 6, 1486-1493. - journal articleMicrostructure evolution in L12 hardened Co-base superalloys during creepLi, Y., Pyczak, F., Paul, J., Oehring, M., Lorenz, U., Yao, Z. (2017)
In: Journal of Materials Research, Vol. 32, 24, 4522-4530. - journal articleMorphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloysWang, L., Zenk, C., Stark, A., Felfer, P., Gabrisch, H., Goeken, M., Lorenz, U., Pyczak, F. (2017)
In: Acta Materialia, Vol. 137, 36-44. - journal articleInducing Stable Alpha + Beta Microstructures during Selective Laser Melting of Ti-6Al-4V Using Intensified Intrinsic Heat TreatmentsBarriobero-Vila, P., Gussone, J., Haubrich, J., Sandloebes, S., da Silva, J.C., Cloetens, P., Schell, N., Requena, G. (2017)
In: Materials, Vol. 10, 3, 268. - journal articleCorrigendum to: "A fossil biting midge (Diptera: Ceratopogonidae) from early Eocene Indian amber with a complex pheromone evaporator" published in Scientific Reports, 6 (2016) 34352Stebner, F., Szadziewski, R., Ruehr, P.T., Singh, H., Hammel, J.U., Kvifte, G.M., Rust, J. (2017)
In: Scientific Reports, Vol. 7, 41899. - journal articleDeformation characteristics of the intermetallic alloy 60NiTiBenafan, O., Garg, A., Noebe, R.D., Skorpenske, H.D., An, K., Schell, N. (2017)
In: Intermetallics, Vol. 82, 40-52. - journal articleMicrostructure of gas atomised Gamma-TiAl based alloy powdersLaipple, D., Wang, L., Rackel, M., Stark, A., Schwebke, B., Schreyer, A., Pyczak, F. (2017)
In: MRS Advances, Vol. 2, 25, 1347-1352. - journal articleStructural and magnetic properties of the nanocomposite materials based on a mesoporous silicon dioxide matrixGrigorieva, N.A., Eckerlebe, H., Eliseev, A.A., Lukashin, A.V., Napolskii, K.S., Kraje, M., Grigoriev, S.V. (2017)
In: Journal of Experimental and Theoretical Physics: JETP, Vol. 124, 3, 476-492. - journal articleMicrostructural characterization of NiTi shape memory alloy produced by rotary hot forgingRodrigues, P., Braz Fernandes, F.M., Paula, A.S., Oliveira, J.P., Ribero, S.B., Texeira, E.N., Schell, N. (2017)
In: Powder Diffraction, Vol. 32, S1, S 201-206. - journal articleInfluence of alloy composition and thermal history on carbide precipitation in Gamma-based TiAl alloysWang, L., Lorenz, U., Muench, M., Stark, A., Pyczak, F. (2017)
In: Intermetallics, Vol. 89, 32-39. - journal articleEffect of hot rolling and primary annealing on the microstructure and texture of a Beta-stabilised Gamma-TiAl based alloyErdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S., Clemens, H. (2017)
In: Acta Materialia, Vol. 126, 145-153. - journal articleNew POLDI-project of reincarnation of a polarized neutron diffractometer at the reactor PIKZobkalo, I., Gavrilov, S., Matveev, V., Fenske, J. (2017)
In: Journal of Physics: Conference Series, Vol. 862, 012031. - journal articleMicrostructure and kinetics of intermetallic phase growth of three-layered A1050/AZ31/A1050 clads prepared by explosive welding combined with subsequent annealingFronczek, D.M., Chulist, R., Litynska-Dobrzynska, L., Kac, S., Schell, N., Kania, Z., Szulc, Z., Wojewoda-Budka, J. (2017)
In: Materials and Design, Vol. 130, 120-130. - journal articleCalibrating SANS data for instrument geometry and pixel sensitivity effects: Access to an extended Q rangeKarge, L., Gilles, R., Busch, S. (2017)
In: Journal of Applied Crystallography, Vol. 50, 5, 1382-1394. - journal articleCharacteristics of intermetallic phases in Cu/(Sn,Ni) diffusion couples annealed at 220 °CWierzbicka-Miernik, A., Wojewoda-Budka, J., Miernik, K., Litynska-Dobrzynska, L., Schell, N. (2017)
In: Journal of Alloys and Compounds, Vol. 693, 1102-1108. - journal articleProduction of Al/NiTi composites by friction stir welding assisted by electrical currentOliveira, J.P., Duarte, J.F., Inacio, P., Schell, N., Miranda, R.M., Santos, T.G. (2017)
In: Materials and Design, Vol. 113, 311-318. - journal articlePhase transformations of stoichiometric mixtures of hematite and iron under FAST conditionsWitte, K., Bodnar, W., Schell, N., Fulda, G., Burkel, E. (2017)
In: Journal of Alloys and Compounds, Vol. 724, 728-734. - journal articleDepth resolved near-surface residual stresses in Gamma-based TiAl before and after high temperature exposurePaul, J.D.H., Oehring, M., Appel, F., Pyczak, F. (2017)
In: Intermetallics, Vol. 84, 103-111. - journal articleCrack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopyIqbal, F., Pyczak, F., Neumeier, S., Goeken, M. (2017)
In: Materials Science and Engineering A, Vol. 689, 11-16. - journal articleMorphology and stability of orthorhombic and hexagonal phases in a lamellar Gamma-Ti-42Al-8.5Nb alloy-A transmission electron microscopy studyGabrisch, H., Lorenz, U., Pyczak, F., Rackel, M., Stark, A. (2017)
In: Acta Materialia, Vol. 135, 304-313. - journal articleSynchrotron-Based Capabilities for Studying Engineering Materials at PETRA-IIISchell, N. (2017)
In: Synchrotron Radiation News, Vol. 30, 3, 29-34. - journal articleEffects of laser shock peening on the microstructure and fatigue crack propagation behaviour of thin AA2024 specimensKashaev, N., Ventzke, V., Horstmann, M., Chupakhin, S., Riekehr, S., Falck, R., Maawad, E., Staron, P., Schell, N., Huber, N. (2017)
In: International Journal of Fatigue, Vol. 98, 223-233. - journal articleOrdering and disordering of β/βo-phase in γ-TiAl based alloys investigated by neutron diffractionKononikhina, V., Stark, A., Gan, W., Pyczak, F., Schreyer, A. (2017)
In: MRS Advances, Vol. 2, 26, 1399-1404. - journal articleCephalic anatomy and three-dimensional reconstruction of the head of Catops ventricosus (Weise, 1877) (Coleoptera: Leiodidae: Cholevinae)Antunes-Carvalho, C., Yavorskaya, M., Gnaspini, P., Ribera, I., Hammel, J.U., Beutel, R.G. (2017)
In: Organisms Diversity and Evolution, Vol. 17, 1, 199-212. - journal articleReconstructing the anterior part of the nervous system of Gordius aquaticus (Nematomorpha, cycloneuralia) by a multimethodological approachHenne, S., Friedrich, F., Hammel, J.U., Sombke, A., Schmidt-Rhaesa, A. (2017)
In: Journal of Morphology, Vol. 278, 1, 106-118. - journal articleNeutron detectors for the ESS diffractometersStefanescu, I., Christensen, M., Fenske, J., R. Hall-Wilton, R., Henry, P., Kirstein, O., Mueller, M., Nowak, G., Pooley, D., Raspino, D., Rhodes, N., Saroun, J., Schefer, J., Schooneveld, E., Sykora, J., Schweika, W. (2017)
In: Journal of Instrumentation, Vol. 12, P01019. - journal articleMicrostructure stability of Gamma-TiAl produced by selective laser meltingGussone, J., Garces, G., Haubrich, J., Stark, A., Hagedorn, Y.-C., Schell, N., Requena, G. (2017)
In: Scripta Materialia, Vol. 130, 110-113. - journal articleIon irradiation effects on a magnetic Si/Ni/Si trilayer and lateral magnetic–nonmagnetic multistrip patterning by focused ion beamDev, B.N., Banu, N., Fassbender, J., Grenzer, J., Schell, N., Bischoff, L., Groetzschel, R., McCord, J. (2017)
In: Indian Journal of Physics, Vol. 91, 10, 1167-1172. - journal articleMyoanatomy of the velvet worm leg revealed by laboratory-based nanofocus X-ray source tomographyMueller, M., de Sena Oliveira, I., Allner, S., Ferstl, S., Bidola, P., Mechlem, K., Fehringer, A., Hehn, L., Dierolf, M., Achterhold, K., Gleich, B., Hammel, J.U., Jahn, H., Mayer, G., Pfeiffer, F. (2017)
In: Proceedings of the National Academy of Sciences of the United States of America: PNAS, Vol. 114, 47, 12378-12383. - journal articleIn Situ Experiment for Laser Beam Welding of Ti Alloys Using High-Energy X-RaysStaron, P., Liu, J., Riekehr, S., Schell, N., Huber, N., Kashaev, N., Mueller, M., Schreyer, A. (2017)
In: Materials Science Forum, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VIII, Vol. 905, 114-119. - journal articleCrystallographic Characterization on Polycrystalline Ni-Mn-Ga Alloys with Strong Preferred OrientationLi, Z., Yang, B., Zou, N., Zhang, Y., Esling, C., Gan, W., Zhao, X., Zuo, L. (2017)
In: Materials, Vol. 10, 5, 463. - journal articleChanges within the stabilizing layer of ZnO nanoparticles upon washingSchindler, T., Schmutzler, T., Schmiele, M., Lin, W., Segets, D., Peukert, W., Appavou, M.-S., Kriele, A., Gilles, R., Unruh, T. (2017)
In: Journal of Colloid and Interface Science, Vol. 504, 356-362. - journal articleQuantifying adsorption-induced deformation of nanoporous materials on different length scalesMorak, R., Braxmeier, S., Ludescher, L., Putz, F., Busch, S., Hüsing, N., Reichenauer, G., Paris, O. (2017)
In: Journal of Applied Crystallography, Vol. 50, 5, 1404-1410. - journal articleMicrostructure of calcite deformed by high-pressure torsion: An X-ray line profile studySchuster, R., Schafler, E., Schell, N., Kunz, M., Abart, R. (2017)
In: Tectonophysics, Vol. 721, 448-461. - journal articleThe origin of striation in the metastable β phase of titanium alloys observed by transmission electron microscopyFan, J., Li, J., Zhang, Y., Kou, H., Ghanbaja, J., Gan, W., Germain, L., Esling, C. (2017)
In: Journal of Applied Crystallography, Vol. 50, 3, 795-804. - journal articleComposite structure of α phase in metastable β Ti alloys induced by lattice strain during β to α phase transformationHua, K., Zhang, Y., Kou, H., Li, J., Gan, W., Fundenberger, J., Esling, C. (2017)
In: Acta Materialia, Vol. 132, 307-326. - journal articleReply to comments on “composite structure of α phase in metastable β Ti alloys induced by lattice strain during β to α phase transformation” by prof. D. BanerjeeHua, K., Zhang, Y., Kou, H., Li, J., Gan, W., Fundenberger, J.-J., Esling, C. (2017)
In: Scripta Materialia, Vol. 141, 148-150. - journal articleCombined caloric effects in a multiferroic Ni–Mn–Ga alloy with broad refrigeration temperature regionHu, Y., Li, Z., Yang, B., Qian, S., Gan, W., Gong, Y., Li, Y., Zhao, D., Liu, J., Zhao, X., Zuo, L., Wang, D., Du, Y. (2017)
In: APL Materials, Vol. 5, 046103. - journal articleCycling capacity recovery effect: A coulombic efficiency and post-mortem studyWilhelm, J., Seidlmayer, S., Keil, P., Schuster, J., Kriele, A., Gilles, R., Jossen, A. (2017)
In: Journal of Power Sources, Vol. 365, 327-338. - journal articleEnhanced multiscale modeling of macroscopic and microscopic residual stresses evolution during multi-thermo-mechanical processesZhang, X., Wang, D., Xiao, B., Andrä, H., Gan, W., Hofmann, M., Ma, Z. (2017)
In: Materials & Design, Vol. 115, 364-378. - journal articleThe influence of C/Ta ratio on TaC precipitates in Co-Re base alloys investigated by small-angle neutron scatteringKarge, L., Gilles, R., Mukherji, D., Strunz, P., Beran, P., Hofmann, M., Gavilano, J., Keiderling, U., Dolotko, O., Kriele, A., Neubert, A., Rösler, J., Petry, W. (2017)
In: Acta Materialia, Vol. 132, 354-366. - journal articleDevelopment of a TiCp Reinforced Ni-Based Superalloy MMC, with High Creep Resistance and Reduced WeightLemos, G., Fredel, M.C., Pyczak, F., Tetzlaff, U. (2017)
In: Key Engineering Materials, 21st Symposium on Composites, Vol. 742, 189-196. - journal articleNanotomography endstation at the P05 beamline: Status and perspectivesGreving, I., Ogurreck, M., Marschall, F., Last, A., Wilde, F., Dose, T., Burmester, H., Lottermoser, L., Mueller, M., David, C., Beckmann, F. (2017)
In: Journal of Physics: Conference Series, Vol. 849, 012056. - journal articleEffect of Extrusion Temperature on the Plastic Deformation of an Mg-Y-Zn Alloy Containing LPSO Phase Using In Situ Neutron DiffractionGarces, G., Perez, P., Cabeza, S., Kabra, S., Gan, W., Adeva, P. (2017)
In: Metallurgical and Materials Transactions A, Vol. 48, 11, 5332-5343. - journal articleInhomogeneity and relaxation phenomena in the graphite anode of a lithium-ion battery probed by in situ neutron diffractionZinth, V., von Lüders, C., Wilhelm, J., Erhard, S.V., Hofmann, M., Seidlmayer, S., Rebelo-Kornmeier, J., Gan, W., Jossen, A., Gilles, R. (2017)
In: Journal of Power Sources, Vol. 361, 54-60. - journal articlePhase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniquesVieweg, A., Povoden-Karadeniz, E., Ressel, G., Prevedel, P., Wojcik, T., Mendez-Martin, F., Stark, A., Keckes, J., Kozeschnik, E. (2017)
In: Materials and Design, Vol. 136, 214-222.
2016
- journal articleOn the mechanisms for martensite formation in YAG laser welded austenitic NiTiOliveira, J.P., Braz Fernandes, F.M., Miranda, R.M., Schell, N. (2016)
In: Shape Memory and Superelasticity, Vol. 2, 1, 114-120. - journal articleInteraction of a biosurfactant, Surfactin with a cationic Gemini surfactant in aqueous solutionJin, L., Haramus, V.M., Liu, F., Xiao, J., Eckerlebe, H., Willumeit-Roemer, R. (2016)
In: Journal of Colloid and Interface Science, Vol. 481, 201-209. - journal articleLithiation-driven structural transition of VO2F into disordered rock-salt LixVO2FChen, R., Maawad, E., Knapp, M., Ren, S., Beran, P., Witter, R., Hempelmann, R. (2016)
In: RSC Advances, Vol. 6, 69, 65112-65118. - journal articleGrain refinement of intermetallic compounds in the Cu–Sn system under high pressure torsionKorneva, A., Straumal, B., Chulist, R., Kilmametov, A., Bala, P., Cios, G., Schell, N., Zieba, P. (2016)
In: Materials Letters, Vol. 179, 12-15. - journal articleMartensitic transition, structure and magnetic anisotropy of martensite in Ni-Mn-Sn single crystalCzaja, P., Szczerba, M.J., Chulist, R., Balanda, M., Przewoznik, J., Chumlyakov, Y.I., Schell, N., Kapusta, Cz., Maziarz, W. (2016)
In: Acta Materialia, Vol. 118, 213-220. - journal articleOrthorhombic phase formation in a Nb-rich Gamma-TiAl based alloy – An in situ synchrotron radiation investigationRackel, M.W., Stark, A., Gabrisch, H., Schell, N., Schreyer, A., Pyczak, F. (2016)
In: Acta Materialia, Vol. 121, 343-351. - journal articleEarliest Onychophoran in Amber Reveals Gondwanan Migration Patternsde Sena Oliveira, I., Bai, M., Jahn, H., Gross, V., Martin, C., Hammel, J.U., Zhang, W., Mayer, G. (2016)
In: Current Biology, Vol. 26, 19, 2594-2601. - journal articleA fossil biting midge (Diptera: Ceratopogonidae) from early Eocene Indian amber with a complex pheromone evaporatorStebner, F., Szadziewski, R., Ruehr, P.T., Singh, H., Hammel, J.U., Kvifte, G.M., Rust, J. (2016)
In: Scientific Reports, Vol. 6, 34352. - journal articleResidual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffractionOliveira, J.P., Braz Fernandes, F.M., Miranda, R.M., Schell, N., Ocana, J.L. (2016)
In: Materials and Design, Vol. 100, 180-187. - journal articleHigh-Performance Low-Temperature Li+ Intercalation in Disordered Rock-Salt Li–Cr–V OxyfluoridesChen, R., Ren, S., Mu, X., Maawad, E., Zander, S., Hempelmann, R., Hahn, H. (2016)
In: ChemElectroChem, Vol. 3, 6, 892-895. - journal articleThe structure of liquid water beyond the first hydration shellHenao, A., Busch, S., Guardia, E., Tamarit, J.L., Pardo, L.C. (2016)
In: Physical Chemistry Chemical Physics, Vol. 18, 28, 19420-19425. - journal articleA detailed study on the transition from the blocked to the superparamagnetic state of reduction-precipitated iron oxide nanoparticlesWitte, K., Bodnar, W., Mix, T., Schell, N., Fulda, G., Woodcock, T.G., Burkel, E. (2016)
In: Journal of Magnetism and Magnetic Materials, Vol. 403, 103-113. - journal articleOn the Bauschinger Effect in TiAl AlloysPaul, J.D.H., Hoppe, R., Appel, F. (2016)
In: Acta Materialia, Vol. 104, 101-108. - journal articleStructure of DPPC–hyaluronan interfacial layers – effects of molecular weight and ion compositionWieland, D.C.F., Degen, P., Zander, T., Gayer, S., Raj, A., An, J., Dedinaite, A., Claesson, P., Willumeit-Roemer, R. (2016)
In: Soft Matter, Vol. 12, 3, 729-740. - journal articleA robust comparison of dynamical scenarios in a glass-forming liquidVispa, A., Busch, S., Tamarit, J.L., Unruh, T., Fernandez-Alonso, F., Pardo, L.C. (2016)
In: Physical Chemistry Chemical Physics, Vol. 18, 5, 3975-3981. - journal articleModeling concepts for intermetallic titanium aluminidesAppel, F., Clemens, H., Fischer, F.D. (2016)
In: Progress in Materials Science, Vol. 81, 55-124. - journal articleStructural properties of Ti/Al clads manufactured by explosive welding and annealingFronczek, D.M., Wojewoda-Budka, J., Chulist, R., Sypien, A., Korneva, A., Szulc, Z., Schell, N., Zieba, P. (2016)
In: Materials and Design, Vol. 91, 80-89. - journal articleHigh strain and long duration cycling behavior of laser welded NiTi sheetsOliveira, J.P., Miranda, R.M., Schell, N., Braz Fernandes, F.M. (2016)
In: International Journal of Fatigue, Vol. 83, 2, 195-200. - journal articleLoad partition and microstructural evolution during in situ hot deformation of Ti–6Al–6V–2Sn alloysCanelo-Yubero, D., Requena, G., Sket, F., Poletti, C., Warchomicka, F., Daniels, J., Schell, N., Stark, A. (2016)
In: Materials Science and Engineering A, Vol. 657, 244-258. - journal articleIn Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide AlloyErdely, P., Schmoelzer, T., Schwaighofer, E., Staron, P., Stark, A., Liss, K.-D., Clemens, H., Mayer, S. (2016)
In: Metals, Vol. 6, 1, 10. - journal articleMartensite stabilization during superelastic cycling of laser welded NiTi platesOliveira, J.P., Braz Fernandes, F.M., Schell, N., Miranda, R.M. (2016)
In: Materials Letters, Vol. 171, 273-276. - journal articleOn the atomic structure of cocaine in solutionJohnston, A.J., Busch, S., Pardo, L.C., Callear, S.K., Biggin, P.C., McLain, S.E. (2016)
In: Physical Chemistry Chemical Physics, Vol. 18, 2, 991-999. - journal articleLocal mechanical properties of the (Beta0+Omega0) composite in multiphase titanium aluminides studied with nanoindentation at room and high temperaturesKolb, M., Wheeler, J.M., Mathur, H.N., Neumeier, S., Korte-Kerzel, S., Pyczak, F., Michler, J., Goeken, M. (2016)
In: Materials Science and Engineering A, Vol. 665, 135-140. - journal articleInfluence of crystallographic texture on the microstructure, tensile properties and residual stress state of laser-welded titanium jointsMaawad, E., Gan, W., Hofmann, M., Ventzke, V., Riekehr, S., Brokmeier, H.-G., Kashaev, N., Mueller, M. (2016)
In: Materials and Design, Vol. 101, 137-145. - journal articleBEER-The Beamline for European Materials Engineering Research at ESSFenske, J., Rouijaa, M., Saroun, J., Kampmann, R., Staron, P., Nowak, G., Pilch, J., Beran, P., Strunz, P., Sittner, P., Brokmeier, H.-G., Ryukhtin, V., Kaderavek, L., Strobl, M., Mueller, M., Lukas, P., Schreyer, A. (2016)
In: Journal of Physics: Conference Series, Vol. 746, 1, 012009. - journal articleStructural Characterization of Lecithin-Stabilized Tetracosane Lipid Nanoparticles - Part I: EmulsionsSchmiele, M., Busch, S., Morhenn, H., Schindler, T., Schmutzler, T., Schweins, R., Lindner, P., Boesecke, P., Westermann, M., Steiniger, F., Funari, S.S., Unruh, T. (2016)
In: The Journal of Physical Chemistry B, Vol. 120, 24, 5505-5512. - journal articleStructural Characterization of Lecithin-Stabilized Tetracosane Lipid Nanoparticles - Part II: SuspensionsSchmiele, M., Busch, S., Morhenn, H., Schindler, T., Schmutzler, T., Schweins, R., Lindner, P., Boesecke, P., Westermann, M., Steiniger, F., Funari, S.S., Unruh, T. (2016)
In: The Journal of Physical Chemistry B, Vol. 120, 24, 5513-5526. - journal articleNeutron optics concept for the materials engineering diffractometer at the ESSSaroun, J., Fenske, J., Rouijaa, M., Beran, P., Navratil, J., Lukas, P., Schreyer, A., Strobl, M. (2016)
In: Journal of Physics: Conference Series, Vol. 746, 1, 012011. - journal articleLamellar Diblock Copolymer Films with Embedded Maghemite NanoparticlesYao, Y., Metwalli, E., Opel, M., Haese, M., Moulin, J., Rodewald, K., Rieger, B., Müller-Buschbaum, P. (2016)
In: Advanced Materials Interfaces, Vol. 3, 8, 1500712. - journal articleProcedural influences on compression and injection moulded cellulose fibre-reinforced polylactide (PLA) composites: Influence of fibre loading, fibre length, fibre orientation and voidsGraupner, N., Ziegmann, G., Wilde, F., Beckmann, F., Muessig, J. (2016)
In: Composites / A, Vol. 81, 158-171. - journal articleProcessing of Al–12Si–TNM composites by selective laser melting and evaluation of compressive and wear propertiesPrashanth, K.G., Scudino, S., Chaubey, A.K., Loeber, L., Wang, P. Attar, H., Schimansky, F.P., Pyczak, P., Eckert, J. (2016)
In: Journal of Materials Research, Vol. 31, 1, 55-65. - journal articleMapping strain fields induced in Zr-based bulk metallic glasses during in-situ nanoindentation by X-ray nanodiffractionGamcova, J., Mohanty, G., Michalik, S., Wehrs, J., Bednarcik, J., Krywka, C., Breguet, J.M., Michler, J., Franz, H. (2016)
In: Applied Physics Letters, Vol. 108, 3, 031907. - journal articleEvidence for a chemical clock in oscillatory formation of UiO-66Goesten, M.G., de Lange, M.F., Olivos.Suarez, A.I., Bavykina, A.V., Serra-Crespo, P., Krywka, C., Bickelhaupt, F.M., Kapteijn, F., Gascon, J. (2016)
In: Nature Communications, Vol. 7, 11832. - journal articleImpact of the B2 ordering behavior on the mechanical properties of a FeCoMo alloyTurk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W.M., Staron, P., Primig, S. (2016)
In: Materials Science and Engineering A, Vol. 662, 511-518. - journal articleHigh-Temperature Stable Zirconia Particles Doped with Yttrium, Lanthanum, and GadoliniumLeib, E.W., Pasquarelli, R.M., Blankenburg, M., Mueller, M., Schreyer, A., Janssen, R., Weller, H., Vossmeyer, T. (2016)
In: Particle & Particle Systems Characterization, Vol. 33, 9, 645-655. - journal articleCross-sectional structure-property relationship in a graded nanocrystalline Ti1−xAlxN thin filmZalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P.H., Keckes, J. (2016)
In: Acta Materialia, Vol. 102, 212-219. - journal articleIn-situ Observation of Cross-Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during NanoindentationZeilinger, A., Todt, J., Krywka, C., Mueller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C., Keckes, J. (2016)
In: Scientific Reports, Vol. 6, 22670. - journal articlePolarization transfer in Rayleigh scattering of hard x-raysBlumenhagen, K.-H., Fritzsche, S., Gassner, T., Gumberidze, A., Maertin, R., Schell, N., Seipt, D., Spillmann, U., Surzhykov, A., Trotsenko, S., Weber, G., Yerokhin, V.A., Stoehlker, T. (2016)
In: New Journal of Physics, Vol. 18, 10, 103034. - journal articleDynamics of water confined in mesoporous magnesium carbonateSoininen, A.J., Appavou, M.-S., Frykstrand, S., Welch, K., Khaneft, M., Kriele, A., Bellissent-Funel, M.-C., Stroemme, M., Wuttke, J. (2016)
In: The Journal of Chemical Physics, Vol. 145, 23, 234503. - journal articleEffect of compressive load on the martensitic transformation from austenite to 5M martensite in a polycrystalline Ni–Mn-Ga alloy studied by in-situ neutron diffractionLi, Z., Zou, N., Yang, B., Gan, W., Hou, L., Li, X., Zhang, Y., Esling, C., Hofmann, M., Zhao, X., Zuo, L. (2016)
In: Journal of Alloys and Compounds, Vol. 666, 1-9. - journal articleMicrostructure evolution and mechanical properties of nano-SiCp/AZ91 composite processed by extrusion and equal channel angular pressing (ECAP)Qiao, X.G., Ying, T., Zheng, M.Y., Wei, E.D., Wu, K., Hu, X.S., Gan, W.M., Brokmeier, H.G., Golovin, I.S. (2016)
In: Materials Characterization, Vol. 121, 222-230. - journal articleMicrostructure of Ti-45Al-5Nb and Ti-45Al-10Nb powdersLaipple, D., Stark, A., Schimanski, F.-P., Schwebke, B., Pyczak, F., Schreyer, A. (2016)
In: Key Engineering Materials, Powder Metallurgy of Titanium II, Vol. 704, 214-222. - journal articleVERITAS: a high-flux neutron reflectometer with vertical sample geometry for a long pulse spallation sourceMattauch, S., Ioffe, A., Lott, D., Menelle, A., Ott, F., Medic, Z. (2016)
In: Journal of Physics: Conference Series, Vol. 711, 012009. - journal articleMagnetic field-dependent spin structures of nanocrystalline holmiumSzary, P., Kaiser, D., Bick, J.-P., Lott, D., Heinemann, A., Dewhurst, C., Birringer, R., Michels, A. (2016)
In: Journal of Applied Crystallography, Vol. 49, 533-538. - journal articleEvolution of strain-induced hafnium carbides in a molybdenum base Mo–Hf–C alloy studied by small-angle neutron scattering and complementary methodsLang, D., Karge, L., Schatte, J., Gilles, R., Dallinger, R., Weissensteiner, I., Staron, P., Knabl, W., Primig, S., Clemens, H. (2016)
In: Journal of Alloys and Compounds, Vol. 688, 619-631. - journal articleHidden quantum phase transition in Mn1−xFexGe evidenced by small-angle neutron scatteringAltynbaev, E., Siegfried, S.-A., Moskvin, E., Menzel, D., Dewhurst, C., Heinemann, A., Feoktystov, A., Fomicheva, L., Tsvyashchenko, A., Grigoriev, S. (2016)
In: Physical Review B, Vol. 94, 17, 174403. - journal articleMicrostructural changes in an extruded Mg-Zn-Y alloy reinforced by quasicrystalline I-phase by small additions of calcium, manganese and cerium-rich mischmetalMedina, J., Perez, P., Garces, G., Tolnai, D., Stark, A., Schell, N., Adeva, P. (2016)
In: Materials Characterization, Vol. 118, 186-198. - journal articleFormation of an 18R long-period stacking ordered structure in rapidly solidified Mg88Y8Zn4 alloyGarces, G., Requena, G., Tolnai, D., Perez, P., Medina, J., Stark, A., Schell, N., Adeva, P. (2016)
In: Materials Characterization, Vol. 118, 514-518. - journal articleEffect of laser welding parameters on the austenite and martensite phase fractions of NiTiOliveira, J.P., Braz Fernandes, F.M., Miranda, R.M., Schell, N., Ocana, J.L. (2016)
In: Materials Characterization, Vol. 119, 148-151.