Dr. Hajo Dieringa

Dr. Hajo Dieringa

Hybride Werkstoffe und Prozesse

Abteilungsleiter

Tel: +49(0)4152 87 1955

Mobil: +49(0)151 17352726

E-Mail Kontakt

Liste der Publikationen in Publons

Publikationen in Zeitschriften
Bücher und Buchkapitel
Schwerpunkte und Projekte

2025

journal article
The strength-ductility synergy of magnesium matrix nanocomposite achieved by a dual-heterostructureFan, L.,Xiong, Y.,Zeng, Y.,Ni, R.,Zhang, Y.,Ren, L.,Dieringa, H.,Huang, Y.,Quan, G.,Zhang, X. (2025)
In: Journal of Materials Science & Technology, Vol. 215, , , , 296-314.
Zur Publikation beim Verlag

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

conference paper: Florence (I); 14.-18.06.2002
Behaviour of Saffil-fibre reinforced ZE 41 magnesium hybrid MMC in creep and thermal cyclingDieringa, H.,Hort, N.,Kainer, K.U. (2002)
In: CIMTEC 2002, 3rd Forum on New Materials, Advanced Inorganic Structural Fiber Composites IV, Vol. 5, Florence (I), 14.-18.06.2002, , 227-234.
conference paper: Neu-Ulm (D); 19.-21.09.2001
Gefuege und mechanische Eigenschaften von Magnesium-Matrix-VerbundwerkstoffenDieringa, H.,Morales, E.,Fischer, P.,Kree, V.,Kainer, K.U. (2002)
In: Fortschritte in der Metallographie, 35. DGM-Metallographie-Tagung 2001, Vol. 33, Neu-Ulm (D), 19.-21.09.2001, , 91-96.
conference paper: San Diego, Ca (USA); 01.-06.07.2002
Creep and thermal loading of in situ processed magnesium metal matrix compositesDieringa, H.,Hort, N.,Kainer, K.U.,Wesemann, J. (2002)
In: ICCE 9, 9th International Conference on Composite Materials, Vol. , San Diego, Ca (USA), 01.-06.07.2002, , 169-170.
conference lecture: Stuttgart (D); 17.04.2002
MagnesiumlegierungenHort, N.,Dieringa, H.,Kainer, K.U. (2002)
In: IIR-Workshop: Magnesium - Einsatz im Automobilbau, Vol. , Stuttgart (D), 17.04.2002, , .
conference lecture: Stuttgart (D); 17.04.2002
Magnesium-Matrix-VerbundwerkstoffeHort, N.,Dieringa, H.,Kainer, K.U. (2002)
In: IIR-Workshop: Magnesium - Einsatz im Automobilbau, Vol. , Stuttgart (D), 17.04.2002, , .
conference lecture (invited): Stuttgart (D); 15.-16.04.2002
Verfahrensoptimierte LegierungsentwicklungenKainer, K.U.,Letzig, D.,Hort, N.,Dieringa, H. (2002)
In: Magnesium im Automobil, Vol. , Stuttgart (D), 15.-16.04.2002, , .
conference paper: Florence (I); 14.-18.07.2002
Thermal Cycling of Light Metal Matrix Composites Reinforced with Ceremic Short-FibresHort, N.,Dieringa, H.,Kainer, K.U. (2002)
In: CIMTEC 2002, 3rd Forum on New Materials, Advanced Inorganic Structural Fiber Composites IV, Vol. 5, Florence (I), 14.-18.07.2002, , 218-226.
conference paper: Seattle, WA (USA); 17.-21.02.2002
Effect of thermal cycling on QE 22 + 20 VOL % short fibre MMCSKumar, S.,Dieringa, H.,Kainer, K.U. (2002)
In: Magnesium Technology 2002, Vol. , Seattle, WA (USA), 17.-21.02.2002, , 147-150.

2001

2000

journal article
The strength-ductility synergy of magnesium matrix nanocomposite achieved by a dual-heterostructureFan, L.,Xiong, Y.,Zeng, Y.,Ni, R.,Zhang, Y.,Ren, L.,Dieringa, H.,Huang, Y.,Quan, G.,Zhang, X. (2025)
In: Journal of Materials Science & Technology, Vol. 215, , , , 296-314.
Zur Publikation beim Verlag

conference lecture (invited): Orlando (USA); 03.03.2024 - 07.03.2024
Mechanistic origin of the enhanced strength and ductility in Mg-rare earth alloysOvri, H.,Markmann, J.,Barthel, J.,Kruth, M.,Dieringa, H. (2024)
In: TMS 2024, 153rd Annual Meeting and Exhibition, Vol. , Orlando (USA), 03.03.2024 - 07.03.2024, , .
journal article
Effect of Graphene Nanoplatelet Content on Mechanical and Elevated-Temperature Tribological Performance of Self-Lubricating ZE10 Magnesium Alloy NanocompositesKandemir, S.,Yöyler, S.,Kumar, R.,Antonov, M.,Dieringa, H. (2024)
In: Lubricants, Vol. 12, , , 2, 52.
Zur Publikation beim Verlag
journal article
Scope of magnesium ceria nanocomposites for mandibular reconstruction: Degradation and biomechanical evaluation using a 3-dimensional finite element analysis approachKujur, M.S.,Krishnan, A.V.,Manakari, V.,Parande, G.,Dieringa, H.,Mallick, A.,Gupta, M. (2024)
In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 152, , , , 106424.
Zur Publikation beim Verlag
journal article
Insights into creep behavior of Mg–14Gd–1Zn–0.4Zr (wt.%) alloy containing β- and γ-type precipitatesShi, H.,Yang, L.,Huang, Y.,Zhou, S.,Wang, K.,Liu, C.,Gavras, S.,Xiao, L.,Willumeit-Römer, R.,Dieringa, H.,Hort, N. (2024)
In: Materials Science and Engineering: A, Vol. 893, , , , 146065.
Zur Publikation beim Verlag
journal article
Novel Magnesium Nanocomposite for Wire-Arc Directed Energy DepositionDieringa, H.,Nienaber, M.,Giannopoulou, D.,Isakovic, J.,Bohlen, J.,Kujur, M.S.,Ben Khalifa, N.,Klein, T.,Gneiger, S. (2024)
In: Materials, Vol. 17, , , 2, 500.
Zur Publikation beim Verlag
journal article
Improving the ductility and toughness of nano-TiC/AZ61 composite by optimizing bimodal grain microstructure via extrusion speedFan, L.,Zhou, M.,Lao, W.,Zhang, Y.,Dieringa, H.,Zeng, Y.,Huang, Y.,Quan, G. (2024)
In: Journal of Magnesium and Alloys, Vol. 12, , , 8, 3264-3280.
Zur Publikation beim Verlag

journal article
Compressive creep behavior and microstructural evolution of sand-cast and peak-aged Mg–12Gd–0.4Zr alloy at 250 °CShi, H.,Huang, Y.,Yang, L.,Liu, C.,Dieringa, H.,Lu, C.,Xiao, L.,Willumeit-Römer, R.,Hort, N. (2023)
In: Materials Science and Engineering: A, Vol. 882, , , , 145422.
Zur Publikation beim Verlag
journal article
Mechanistic origin of the enhanced strength and ductility in Mg-rare earth alloysOvri, H.,Markmann, J.,Barthel, J.,Kruth, M.,Dieringa, H.,Lilleodden, E. (2023)
In: Acta Materialia, Vol. 244, , , , 118550.
Zur Publikation beim Verlag
journal article
Achieving high strength and ductility in a heterogeneous bimodal grain structured TiC/AZ61 magnesium nanocomposites via powder metallurgyFan, L.,Zhou, M.,Zhang, Y.,Dieringa, H.,Qian, X.,Zeng, Y.,Lu, X.,Huang, Y.,Quan, G. (2023)
In: Materials Science and Engineering: A, Vol. 867, , , , 144344.
Zur Publikation beim Verlag
conference lecture (invited): Zakynthos (GRC); 11.09.2023 - 14.09.2023
Magnesium-based Nanocomposites - Processing, Properties and PotentialsDieringa, H. (2023)
In: ICSAAM2023 - 10th International Conference on “Structural Analysis of Advanced Materials”, Vol. , Zakynthos (GRC), 11.09.2023 - 14.09.2023, , .
conference lecture (invited): Wien (AUT); 02.07.2023 - 07.07.2023
Novel Magnesium Nanocomposite for Wire Arc Directed Energy DepositionDieringa, H.,Nienaber, M.,Giannopoulou, D.,Bohlen, J.,Ben Khalifa, N.,Klein, T.,Gneiger, S. (2023)
In: Thermec 2023, Vol. , Wien (AUT), 02.07.2023 - 07.07.2023, , .
journal article
Influence of recycled carbon fiber addition on the microstructure and creep response of extruded AZ91 magnesium alloyKandemir, S.,Bohlen, J.,Dieringa, H. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , 7, 2518-2529.
Zur Publikation beim Verlag
conference lecture (invited): Zakhynthos (GRC); 11.09.2023 - 14.09.2023
Development of a sustainable, creepresistant magnesium die casting alloy by avoiding rare earth elementsDieringa, H. (2023)
In: ICSAAM2023 - 10th International Conference on “Structural Analysis of Advanced Materials”, Vol. , Zakhynthos (GRC), 11.09.2023 - 14.09.2023, , .
journal article
Microstructural evolution of Mg–14Gd–0.4Zr alloy during compressive creepShi, H.,Huang, Y.,Yang, L.,Liu, C.,Dieringa, H.,Lu, C.,Xiao, L.,Willumeit-Römer, R.,Hort, N. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , , 3161-3173.
Zur Publikation beim Verlag

journal article
Influence of Extrusion Rate on Microstructure and Mechanical Properties of Magnesium Alloy AM60 and an AM60-Based Metal Matrix NanocompositeGiannopoulou, D.,Bohlen, J.,Ben Khalifa, N.,Dieringa, H. (2022)
In: Nanomaterials, Vol. 12, , , 15, 2682.
Zur Publikation beim Verlag
journal article
Effects of Y Additions on the Microstructures and Mechanical Behaviours of as Cast Mg–xY–0.5Zr AlloysYou, S.,Huang, Y.,Dieringa, H.,Maawad, E.,Gan, W.,Zhang, Y.,Kainer, K.,Willumeit-Römer, R.,Hort, N. (2022)
In: Advanced Engineering Materials, Vol. 24, , , 4, 2101033.
Zur Publikation beim Verlag
journal article
Revealing the role of Al in the microstructural evolution and creep properties of Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloyYang, H.,Jiang, B.,Huang, G.,Huang, Y.,Jin, Y.,Gavras, S.,Dieringa, H. (2022)
In: Materials Science and Engineering: A, Vol. 832, , , , 142358.
Zur Publikation beim Verlag
journal article
Influence of Ca+Bi on tensile and strain hardening behaviour of AZ91 alloyMajhi, J.,Mondal, A.,Basu, A.,Dieringa, H.,Kumar, S. (2022)
In: Materials Science and Technology, Vol. 38, , , 6, 377-389.
Zur Publikation beim Verlag
journal article
AM60-AlN Nanocomposite and AM60 Alloy Corrosion Activity in Simulated Marine-Coastal AmbienceChavez, L.,Veleva, L.,Sanchez, G.,Dieringa, H. (2022)
In: Metals, Vol. 12, , , 12, 1997.
Zur Publikation beim Verlag
conference lecture (invited): Virtual; 01.09.2022
Production of Nanoparticle-Reinforced Magnesium Alloys Using Hybrid ProcessesDieringa, H. (2022)
In: Technologies Webinar - Latest Innovations in Materials; Processing and Sustainable/Green Technologies, Vol. , Virtual, 01.09.2022, , .
conference lecture (invited): Verona (ITA); 26.10.2022 - 28.10.2022
Hybrid processes for the production of ex-situ magnesium-based nanocompositesDieringa, H. (2022)
In: 3D-ICOMAS Intern. Conf. on Materials Science, Vol. , Verona (ITA), 26.10.2022 - 28.10.2022, , .
journal article
Assessment of the Mechanical and Corrosion Properties of Mg-1Zn-0.6Ca/Diamond Nanocomposites for Biomedical ApplicationsŞevik, H.,Özarslan, S.,Dieringa, H. (2022)
In: Nanomaterials, Vol. 12, , , 24, 4399.
Zur Publikation beim Verlag
journal article
In Situ Synchrotron Radiation Diffraction Study of Compression of AZ91 Composites Reinforced with Recycled Carbon FibresMance, S.,Dieringa, H.,Bohlen, J.,Gavras, S.,Stark, A.,Schell, N.,Pereira da Silva, J.,Tolnai, D. (2022)
In: Crystals, Vol. 12, , , 11, 1502.
Zur Publikation beim Verlag

conference lecture (invited): Virtual; 02.11.2021 - 04.11.2021
Strengthening effects in an extruded AlN nanoparticle-reinforced magnesium alloy AM60Giannopoulou, D.,Bohlen, J.,Ben Khalifa, N.,Dieringa, H. (2021)
In: LightMAT2021, Vol. , Virtual, 02.11.2021 - 04.11.2021, , .
book part
Creep Characteristics of Metal Matrix CompositesYang, H.,Gavras, S.,Dieringa, H. (2021)
In: Encyclopedia of Materials: Composites, Vol. 1, , , , 375-388.
Zur Publikation beim Verlag
journal article
High temperature tensile, compression and creep behavior of recycled short carbon fibre reinforced AZ91 magnesium alloy fabricated by a high shearing dispersion techniqueKandemir, S.,Gavras, S.,Dieringa, H. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, , , 5, 1753-1767.
Zur Publikation beim Verlag
Other: editorial
Editorial: Latest Developments in the Field of Magnesium Alloys and Their ApplicationsDieringa, H.,StJohn, D.,Pérez Prado, M.T.,Kainer, K.U. (2021)
In: Frontiers in Materials, Vol. 8, , , , 726297.
Zur Publikation beim Verlag
journal article
Properties of Mg-based Metal Matrix Nanocomposites Processed by High Shear Dispersion Technique (HSDT) - A ReviewYang, H.,Patel, J.,Yang, X.,Gavras, S.,Dieringa, H. (2021)
In: Current Nanomaterials, Vol. 6, , , 2, 106-118.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: virtual; 15.06.2021 - 18.06.2021
Influence of extrusion rate on microstructure and mechanical properties of magnesium alloy AM60 and an AM60-based metal matrix nanocompositeGiannopoulou, D.,Dieringa, H.,Ben Khalifa, N.,Bohlen, J. (2021)
In: Magnesium Alloys and their Applications 2021, Vol. , virtual, 15.06.2021 - 18.06.2021, , .
conference paper: null; null
Improving the Creep Resistance of Elektron21 by Adding AlN/Al Nanoparticles Using the High Shear Dispersion TechniqueYang, H.,Huang, Y.,Kainer, K.,Dieringa, H. (2021)
In: Magnesium 2021 : Proceedings of the 12th International Conference on Magnesium Alloys and their Applications, Vol. , , , , 57-69.
Zur Publikation beim Verlag
journal article
Corrosion Behavior of Extruded AM60-AlN Metal Matrix Nanocomposite and AM60 Alloy Exposed to Simulated Acid Rain EnvironmentChavez, L.,Veleva, L.,Feliu, S.,Giannopoulou, D.,Dieringa, H. (2021)
In: Metals, Vol. 11, , , 6, 990.
Zur Publikation beim Verlag
journal article
Novel Magnesium Based Materials: Are They Reliable Drone Construction Materials? A Mini ReviewHöche, D.,Weber, W.,Gazenbiller, E.,Gavras, S.,Hort, N.,Dieringa, H. (2021)
In: Frontiers in Materials, Vol. 8, , , , 575530.
Zur Publikation beim Verlag
book part
Creep Characteristics of Metal Matrix CompositesYang, H.,Gavras, S.,Dieringa, H. (2021)
In: Encyclopedia of Materials: Composites, Vol. 1, , , , 375-388.
Zur Publikation beim Verlag

Other: editorial
Production and Properties of Light Metal Matrix NanocompositesDieringa, H. (2020)
In: Metals, Vol. 10, , , 1, 95.
Zur Publikation beim Verlag
journal article
Individual/synergistic effects of Al and AlN on the microstructural evolution and creep resistance of Elektron21 alloyYang, H.,Zander, D.,Huang, Y.,Kainer, K.,Dieringa, H. (2020)
In: Materials Science and Engineering A, Vol. 777, , , , 139072.
Zur Publikation beim Verlag | Zur Publikation
journal article
Effects of heat treatment on the microstructural evolution and creep resistance of Elektron21 alloy and its nanocompositeYang, H.,Zander, D.,Jiang, B.,Huang, Y.,Gavras, S.,Kainer, K.,Dieringa, H. (2020)
In: Materials Science and Engineering A, Vol. 789, , , , 139669.
Zur Publikation beim Verlag | Zur Publikation
journal article
Roles of Nd and Mn in a new creep-resistant magnesium alloyMo, N.,McCarroll, I.,Tan, Q.,Ceguerra, A.,Cairney, J.,Dieringa, H.,Huang, Y.,Jiang, B.,Pan, F.,Bermingham, M.,Zhang, M.-X. (2020)
In: Materials Science and Engineering A, Vol. 779, , , , 139152.
Zur Publikation beim Verlag | Zur Publikation
journal article
Microstructural correlation with tensile and creep properties of AZ91 alloy in three casting techniquesShastri, H.,Mondal, A.,Dutta, K.,Dieringa, H.,Kumar, S. (2020)
In: Journal of Manufacturing Processes, Vol. 57, , , , 566-573.
Zur Publikation beim Verlag | Zur Publikation

journal article
Influences of Al and high shearing dispersion technique on the microstructure and creep resistance of Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloyYang, H.,Huang, Y.,Tolnai, D.,Kainer, K.U.,Dieringa, H. (2019)
In: Materials Science and Engineering A, Vol. 764, , , , 138215.
Zur Publikation beim Verlag | Zur Publikation
journal article
Grain-scale investigation of the anisotropy of Portevin-Le Chatelier effect in Mg AZ91 alloyOvri, H.,Steglich, D.,Dieringa, H.,Lilleodden, E.T. (2019)
In: Materials Science and Engineering A, Vol. 740-741, , , , 226-234.
Zur Publikation beim Verlag | Zur Publikation
journal article
Advanced Metal Matrix NanocompositesMalaki, M.,Xu, W.,Kasar, A.K.,Menezes, P.L.,Dieringa, H.,Varma, R.S.,Gupta, M. (2019)
In: Metals, Vol. 9, , , 3, 330.
Zur Publikation beim Verlag
journal article
Enhancing the creep resistance of AlN/Al nanoparticles reinforced Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloy by a high shear dispersion techniqueYang, H.,Huang, Y.,Song, B.,Kainer, K.U.,Dieringa, H. (2019)
In: Materials Science and Engineering A, Vol. 755, , , , 18-27.
Zur Publikation beim Verlag | Zur Publikation
book part
Connected Process Design for Hot Working of a Creep-Resistant Mg–4Al–2Ba–2Ca Alloy (ABaX422)Rao, K.P.,Chalasani, D.,Suresh, K.,Prasad, Y.V.R.K.,Dieringa, H.,Hort, N. (2019)
In: Material and Process Design for Lightweight Structures, Vol. 1319, , , , 90-103.
Zur Publikation beim Verlag
conference lecture (invited): Jonkoeping (S); 27.-29.05.2019
Effect of AlN nanoparticles added by intensive melt shearing on the microstructure and mechanical properties of an extruded AM60 magnesium alloy nanocompositeKar, S.,Bohlen, J.,Dieringa, H. (2019)
In: 27nd International Conference on Processing and Fabrication of Advanced Materials, PFAM XXVII, Vol. , Jonkoeping (S), 27.-29.05.2019, , .
conference paper: Jonkoeping (S); 27.-29.05.2019
Effect of AlN nanoparticles added by intensive melt shearing on the microstructure and mechanical properties of an extruded AM60 magnesium alloy nanocompositeKar, S.,Bohlen, J.,Dieringa, H. (2019)
In: Proceedings of 27nd International Conference on Processing and Fabrication of Advanced Materials, PFAM XXVII, Vol. , Jonkoeping (S), 27.-29.05.2019, , 324-336.
journal article
The Role of Second Phases on the Creep Behavior of As-Cast and Hot-Extruded Mg-Ca-Zr AlloysYou, S.,Huang, Y.,Dieringa, H.,Maawad, E.,Gan, W.,kainer, K.U.,Hort, N. (2019)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 71, , , 7, 2227-2234.
Zur Publikation beim Verlag | Zur Publikation
journal article
Influences of AlN/Al Nanoparticles on the Creep Properties of Elektron21 Prepared by High Shear Dispersion TechnologyYang, H.,Huang, Y.,Gavras, S.,Kainer, K.U.,Hort, N.,Dieringa, H. (2019)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 71, , , 7, 2245-2252.
Zur Publikation beim Verlag | Zur Publikation
journal article
Influence of AlN Nanoparticle Addition on Microstructure and Mechanical Properties of Extruded Pure Magnesium and an Aluminum-Free Mg-Zn-Y AlloyGiannopoulou, D.,Dieringa, H.,Bohlen, J. (2019)
In: Metals, Vol. 9, , , 6, 667.
Zur Publikation beim Verlag
conference lecture: Dresden (D); 18.-20.09.2019
Druckkriechverhalten moderner aluminiumhaltiger Magnesiumlegierungen fuer den DruckgussDieringa, H.,Gavras, S. (2019)
In: Werkstoffwoche 2019, Vol. , Dresden (D), 18.-20.09.2019, , .
conference lecture: Manchester (GB); 05.-07.11.2019
Influence of Al on the microstructural evolution and creep properties of Elektron21 processed by high shearing dispersion techniqueDieringa, H.,Yang, H.,Huang, Y.,Tolnai, D.,Kainer, K.U. (2019)
In: 3rd International Conference on Light Materials - Science and Technology, LightMAT 2019, Vol. , Manchester (GB), 05.-07.11.2019, , .
journal article
Neue kriechbestaendige Magnesiumdruckgusslegierungen frei von Seltenen ErdenDieringa, H.,Kainer, K.U. (2019)
In: DIALOG - Materialwissenschaft und Werkstofftechnik, Vol. 1, , , , 18-22.
conference lecture: Manchester/UK; 05.11.2019 - 07.11.2019
Influence of Al on the microstructural evolution and creep properties of Elektron21 processed by high shearing dispersion techniqueDieringa, H.,Yang, H.,Huang, Y.,Tolnai, T.,Kainer, K. (2019)
In: LightMAT2019, Vol. , Manchester/UK, 05.11.2019 - 07.11.2019, , .
conference lecture (invited): Shanghai (CHN); 15.10.2019 - 18.10.2019
Modification and functionalization of magnesium based materials by the addition of nanoparticles – an overviewDieringa, H. (2019)
In: LMT2019, Vol. , Shanghai (CHN), 15.10.2019 - 18.10.2019, , .
conference lecture (invited): Istanbul (TR); 31.10.-01.11.2019
Influence of ceramic nanoparticles on strength and creep properties of magnesium alloysDieringa, H. (2019)
In: International Materials Technologies and Metallurgyl Conference 2019, MTM 2019, Vol. , Istanbul (TR), 31.10.-01.11.2019, , .
journal article
Development of Pore-Free Ti-Si-C MAX/Al-Si Composite Materials Manufactured by Squeeze Casting InfiltrationDmitruk, A.,Naplocha, K.,Zak, A.,Strojny-Nedza, A.,Dieringa, H.,Kainer, K.U. (2019)
In: Journal of Materials Engineering and Performance, Vol. 28, , , 10, 6248-6257.
Zur Publikation beim Verlag
journal article
Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg–Gd–Ca alloyMo, N.,McCarroll, I.,Tan, Q.,Ceguerra, A.,Liu, Y.,Cairney, J.,Dieringa, H.,Huang, Y.,Jiang, B.,Pan, F.,Bermingham, M.,Zhang, M.-X. (2019)
In: Acta Materialia, Vol. 181, , , , 185-199.
Zur Publikation beim Verlag | Zur Publikation
journal article
Compressive creep behaviour of high-pressure die-cast aluminium-containing magnesium alloys developed for elevated temperature applicationsGavras, S.,Zhu, S.,Easton, M.A.,Gibson, M.A.,Dieringa, H. (2019)
In: Frontiers in Materials, Vol. 6, , , , 262.
Zur Publikation beim Verlag

conference paper: Phoenix, AZ (USA); 11.-15.03.2018
Magnesium Pistons in Engines: Fiction or Fact?Hort, N.,Dieringa, H.,Kainer, K.U. (2018)
In: Conference Proceedings, Magnesium Technology 2018, TMS 2018, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , 349-353.
Zur Publikation beim Verlag
journal article
Review on Hot Working Behavior and Strength of Calcium-Containing Magnesium AlloysRao, K.P.,Prasad, Y.V.R.K.,Dharmendra, C.,Suresh, K.,Hort, N.,Dieringa, H. (2018)
In: Advanced Engineering Materials, Vol. 20, , , 9, 1701102.
Zur Publikation beim Verlag
journal article
Deformation Mechanisms and Formability Window for As-Cast Mg-6Al-2Ca-1Sn-0.3Sr Alloy (MRI 230D)Suresh, K.,Rao, K.P.,Chalasani, D.,Krishna, P.Y.V.R.,Hort, N.,Dieringa, H. (2018)
In: Journal of Materials Engineering and Performance, Vol. 27, , , 3, 1440-1449.
Zur Publikation beim Verlag
conference lecture: Bremen (D); 18.-19.04.2018
Herstellung und mechanische Eigenschaften eines AM60 basierten Metall Matrix Nanokomposits (MMNC)Dieringa, H. (2018)
In: 3. Internationalen DGM-Konferenz-Hybrid Materials and Structures 2018, Vol. , Bremen (D), 18.-19.04.2018, , .
conference paper: Phoenix, AZ (USA); 11.-15.03.2018
Magnesium-Based Metal Matrix Nanocomposites - Processing and PropertiesDieringa, H.,Hort, N. (2018)
In: Supplemental Proceedings, 147th Annual Meeting & Exhibition, TMS 2018 - Symposium on Functional Nanomaterials: Discovery and Integration of Nanomaterials, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , 679-691.
Zur Publikation beim Verlag
conference lecture: Phoenix, AZ (USA); 11.-15.03.2018
Magnesium-Based Metal Matrix Nanocomposites - Processing and PropertiesDieringa, H.,Hort, N. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018, Symposium on Functional Nanomaterials: Discovery and Integration of Nanomaterials, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , .
conference lecture (invited): Phoenix, AZ (USA); 11.-15.03.2018
Mg Alloys: Challenges and Achievements in Controlling Performance, and Future Application PerspectivesDieringa, H.,Hort, N.,Letzig, D.,Bohlen, J.,Hoeche, D.,Blawert, C.,Zheludkevich, M.,Kainer, K.U. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018 - Symposium Magnesium Technology 2018, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , .
conference lecture: Phoenix, AZ (USA); 11.-15.03.2018
Magnesium Pistons in Engines: Fiction or Fact?Hort, N.,Dieringa, H.,Kainer, K.U. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018 - Symposium Magnesium Technology 2018, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , .
conference paper: Phoenix, AZ (USA); 11.-15.03.2018
Mg Alloys: Challenges and Achievements in Controlling Performance, and Future Application PerspectivesDieringa, H.,Hort, N.,Letzig, D.,Bohlen, J.,Hoeche, D.,Blawert, C.,Zheludkevich, M.,Kainer, K.U. (2018)
In: Conference Proceedings, Magnesium Technology 2018, TMS 2018, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , 3-14.
Zur Publikation beim Verlag
conference object: Berlin (D); 23.-24.05.2018
Processing and yield strength increase of an AM60-based metal matrix nanocomposite (MMNC)Dieringa, H. (2018)
In: Abstract Book, 4th International Conference on Structural Nano Composites, NANOSTRUC 2018, Vol. , Berlin (D), 23.-24.05.2018, , 24.
conference paper: Phoenix, AZ (USA); 11.-15.03.2018
Hot Forging Behavior of Mg−8Al−4Ba−4Ca (ABaX844) Alloy and Validation of Processing MapRao, K.P.,Dharmendra, C.,Prasad, Y.V.R.K.,Dieringa, H.,Hort, N. (2018)
In: Conference Proceedings, Magnesium Technology 2018, TMS 2018, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , 289-296.
Zur Publikation beim Verlag
conference lecture: Phoenix, AZ (USA); 11.-15.03.2018
Hot Forging Behavior of Mg−8Al−4Ba−4Ca (ABaX844) Alloy and Validation of Processing MapRao, K.P.,Dharmendra, C.,Prasad, Y.V.R.K.,Dieringa, H.,Hort, N. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018 - Symposium Magnesium Technology 2018, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , .
conference lecture: Phoenix, AZ (USA); 11.-15.03.2018
Recent Developments in the Application of the Interdependence Model of Grain Formation and RefinementSt. John, D.H.,Hu, X.,Sun, M.,Peng, L.,Dieringa, H. (2018)
In: 147th Annual Meeting & Exhibition, Magnesium Technology 2018, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , .
journal article
Current Status and Recent Developments in Porous Magnesium FabricationKucharczyk, A.,Naplocha, K.,Kaczmar, J.W.,Dieringa, H.,Kainer, K.U. (2018)
In: Advanced Engineering Materials, Vol. 20, , , 1, 1700562.
Zur Publikation beim Verlag
conference lecture: Berlin (D); 23.-24.05.2018
Processing and yield strength increase of an AM60-based metal matrix nanocomposite (MMNC)Dieringa, H. (2018)
In: 4th International Conference on Structural Nano Composites, NANOSTRUC 2018, Vol. , Berlin (D), 23.-24.05.2018, , .
conference paper: Phoenix, AZ (USA); 11.-15.03.2018
Recent Developments in the Application of the Interdependence Model of Grain Formation and RefinementSt. John, D.H.,Hu, X.,Sun, M.,Peng, L.,Dieringa, H. (2018)
In: Magnesium Technology 2018, The Minerals, Metals & Materials Series, 147th Annual Meeting & Exhibition, Vol. , Phoenix, AZ (USA), 11.-15.03.2018, , 315-322.
Zur Publikation beim Verlag
conference lecture: Lund (S); 29.-30.05.2018
Magnesium based metal matrix nanocomposites - Effects of nanoparticlesDieringa, H. (2018)
In: Microstructure Control: Towards Innovative Development of Structure Materials, Summer School Lund, Vol. , Lund (S), 29.-30.05.2018, , .
conference paper: Old Windsor (GB); 24.-27.07.2018
Comparison of the Microstructure and Properties of AlN-Reinforced Nanocomposites Based on Elektron21 and AM60Dieringa, H. (2018)
In: Magnesium 2018, Proceedings of the 11th International Conference on Magnesium Alloys and Their Applications, Vol. , Old Windsor (GB), 24.-27.07.2018, , 115-120.
conference lecture (invited): Strasbourg (F); 18.-22.06.2018
Hydrogen storage systems from Mg wastesPistidda, C.,Hardian, R.,Chaudhary, A.-L.,Capurso, G.,Gizer, G.,Milanese, C.,Girella, A.,Dieringa, H.,Kainer, K.U.,Klassen, T.,Dornheim, M. (2018)
In: 2018 E-MRS Spring Meeting and Exhibit, Vol. , Strasbourg (F), 18.-22.06.2018, , .
journal article
Processing of Magnesium-Based Metal Matrix Nanocomposites by Ultrasound-Assisted Particle Dispersion: A ReviewDieringa, H. (2018)
In: Metals, Vol. 8, , , 6, 431.
Zur Publikation beim Verlag
journal article
Hot forging of Mg-4Al-2Ba-2Ca (ABaX422) alloy and validation of processing mapSuresh, K.,Rao, K.P.,Prasad, Y.V.R.K.,Hort, N.,Dieringa, H. (2018)
In: Transactions of Nonferrous Metals Society of China, Vol. 28, , , 8, 1495-1503.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Old Windsor (GB); 24.-27.07.2018
Microstructure, Mechanical and Creep Properties of Elektron21 Reinforced with AlN Nanoparticles by Intensive Melt ShearingYang, H.,Huang, Y.,Song, B.,Kainer, K.U.,Hort, N.,Dieringa, H. (2018)
In: Magnesium 2018, Proceedings of the 11th International Conference on Magnesium Alloys and Their Applications, Vol. , Old Windsor (GB), 24.-27.07.2018, , 128-135.
conference lecture: Old Windsor (GB); 24.-27.07.2018
Microstructure, Mechanical and Creep Properties of Elektron21 Reinforced with AlN Nanoparticles by Intensive Melt ShearingYang, H.,Huang, Y.,Song, B.,Kainer, K.U.,Hort, N.,Dieringa, H. (2018)
In: 11th International Conference on Magnesium Alloys and Their Applications, Mg 2018, Vol. , Old Windsor (GB), 24.-27.07.2018, , .
book part
Magnesium and Magnesium AlloysDieringa, H.,Kainer, K.U. (2018)
In: Springer Handbook of Materials Data, Vol. , , , , 151-159.
Zur Publikation beim Verlag
conference lecture: Old Windsor (GB); 24.-27.07.2018
Comparison of the Microstructure and Properties of AlN-Reinforced Nanocomposites Based on Elektron21 and AM60Dieringa, H. (2018)
In: 11th International Conference on Magnesium Alloys and Their Applications, Mg 2018, Vol. , Old Windsor (GB), 24.-27.07.2018, , .
journal article
Current development of creep-resistant magnesium cast alloys: A reviewMo, N.,Tan, Q.,Bermingham, M.,Huang, Y.,Dieringa, H.,Hort, N.,Zhang, M.-X. (2018)
In: Materials and Design, Vol. 155, , , , 422-442.
Zur Publikation beim Verlag | Zur Publikation
conference object: null; null
Magnesium based nanocomposites - Challenges and PotentialDieringa, H.,Kainer, K.U. (2018)
In: Journal of Material Sciences and Engineering, Conference Proceedings, 19th World Congress on Materials Science and Engineering, Vol. 7, , , , 102-103.
Zur Publikation beim Verlag
conference lecture: Barcelona (E); 11.-13.06.2018
Magnesium based nanocomposites - Challenges and PotentialDieringa, H.,Kainer, K.U. (2018)
In: 19th World Congress on Materials Science and Engineering, Vol. , Barcelona (E), 11.-13.06.2018, , .
journal article
Connected Process Design for Hot Working of a Creep-Resistant Mg–4Al–2Ba–2Ca Alloy (ABaX422)Rao, K.P.,Chalasani, D.,Suresh, K.,Prasad, Y.V.R.K.,Dieringa, H.,Hort, N. (2018)
In: Metals, Vol. 8, , , 6, 463.
Zur Publikation beim Verlag
conference lecture: Hannover (D); 23.-27.04.2018
Nanopartikelverstaerkte Magnesiumlegierungen – Herstellung und EigenschaftenDieringa, H. (2018)
In: Integrated Lightweight Plaza, Hannover Messe 2018, Vol. , Hannover (D), 23.-27.04.2018, , .
journal article
Waste Mg-Al based alloys for hydrogen storageHardian, R.,Pistidda, C.,Chaudhary, A.-L.,Capurso, G.,Gizer, G.,Cao, H.,Milanese, C.,Girella, A.,Santoru, A.,Yigit, D.,Dieringa, H.,Kainer, K.U.,Klassen, T.,Dornheim, M. (2018)
In: International Journal of Hydrogen Energy, Vol. 43, , , 34, 16738-16748.
Zur Publikation beim Verlag | Zur Publikation

conference lecture: Aalen (D); 10.-11.05.2017
Neue Entwicklungen bei MagnesiumlegierungenKainer, K.U.,Dieringa, H. (2017)
In: Aalener Gießerei Kolloquium 2017, Vol. , Aalen (D), 10.-11.05.2017, , .
journal article
Indirect improvement of high temperature mechanical properties of a Mg-based alloy Elektron21 by addition of AlN nanoparticlesDaudin, R.,Terzi, S.,Mallmann, C.,Sanchez Martin, R.,Lhuissier, P.,Boller, E.,Pacureanu, A.,Katsarou, L.,Dieringa, H.,Salvo, L. (2017)
In: Materials Science and Engineering A, Vol. 688, , , , 76-82.
Zur Publikation beim Verlag | Zur Publikation
journal article
High Temperature Deformation of Cast ZW11 Magnesium Alloy with Very Large Grain SizeRao, K.P.,Bagheripoor, M.,Dieringa, H.,Hort, N. (2017)
In: Key Engineering Materials, Advances in Engineering Plasticity and its Application XIII, Vol. 725, , , , 232-237.
Zur Publikation beim Verlag | Zur Publikation
journal article
Influence of Cryogenic Temperatures on the Microstructure and Mechanical Properties of Magnesium Alloys: A ReviewDieringa, H. (2017)
In: Metals, Vol. 7, , , 2, 38.
Zur Publikation beim Verlag
conference paper: San Diego, CA (USA); 26.02.-02.03.2017
Corrosion and Creep Resistance of Thixomolded® Magnesium AlloysBuzolin, R.,Dieringa, H.,Blawert, C.,Frank, H.,Mendis, C.L.,Lohmueller, A.,Kainer, K.U.,Hort, N. (2017)
In: Magnesium Technology 2017, 146th Annual Meeting and Exhibition, TMS 2017, Vol. , San Diego, CA (USA), 26.02.-02.03.2017, , 381-389.
Zur Publikation beim Verlag
conference lecture: San Diego, CA (USA); 26.02.-02.03.2017
A Comparative Study on the Microstructure, Mechanical Properties, and Hot Deformation of Magnesium Alloys Containing Zinc, Calcium and YttriumRao, K.P.,Suresh, K.,Dieringa, H.,Hort, N. (2017)
In: 146th Annual Meeting and Exhibition, TMS 2017, Vol. , San Diego, CA (USA), 26.02.-02.03.2017, , .
conference paper: San Diego, CA (USA); 26.02.-02.03.2017
A Comparative Study on the Microstructure, Mechanical Properties, and Hot Deformation of Magnesium Alloys Containing Zinc, Calcium and YttriumRao, K.P.,Suresh, K.,Dieringa, H.,Hort, N. (2017)
In: Magnesium Technology 2017, 146th Annual Meeting and Exhibition, TMS 2017, Vol. , San Diego, CA (USA), 26.02.-02.03.2017, , 449-461.
Zur Publikation beim Verlag
conference lecture: Landshut (D); 08.-09.03.2017
Magnesium Druckguss – Technologien, Legierungen und SchutzgaseHort, N.,Dieringa, H. (2017)
In: Leichtbau grenzenlos, 8. Landshuter Leichtbau-Colloquium, Vol. , Landshut (D), 08.-09.03.2017, , .
conference lecture: San Diego, CA (USA); 26.02.-02.03.2017
Corrosion and Creep Resistance of Thixomolded® Magnesium AlloysBuzolin, R.,Dieringa, H.,Blawert, C.,Frank, H.,Mendis, C.L.,Lohmueller, A.,Kainer, K.U.,Hort, N. (2017)
In: 146th Annual Meeting and Exhibition, TMS 2017, Vol. , San Diego, CA (USA), 26.02.-02.03.2017, , .
conference lecture (invited): San Sebastian (E); 09.-13.05.2017
Processing and properties of nanoparticle reinforced magnesium alloysDieringa, H. (2017)
In: EMN Nanoparticles Meeting, Vol. , San Sebastian (E), 09.-13.05.2017, , .
conference lecture: Bremen (D); 08.-10.11.2017
Microstructure and mechanical properties of as-cast and heat treated Mg-Ca-Y-Zr alloysYou, S.,Huang, Y.,Dieringa, H.,Kainer, K.U.,Hort, N. (2017)
In: 2nd International Conference on Light Materials, Science and Technology, LightMAT 2017, Vol. , Bremen (D), 08.-10.11.2017, , .
journal article
High Temperature Strength and Hot Working Technology for As-Cast Mg–1Zn–1Ca (ZX11) AlloyRao, K.P.,Suresh, K.,Prasad, Y.V.R.K.,Dharmendra, C.,Hort, N.,Dieringa, H. (2017)
In: Metals, Vol. 7, , , 10, 405.
Zur Publikation beim Verlag
journal article
Optimization of Thermo-Mechanical Processing for Forging of Newly Developed Creep-Resistant Magnesium Alloy ABaX633Rao, K.P.,Dharmendra, C.,Prasad, Y.V.R.K.,Hort, N.,Dieringa, H. (2017)
In: Metals, Vol. 7, , , 11, 513.
Zur Publikation beim Verlag
journal article
Effect of Solution Treatment on Precipitation Behaviors, Age Hardening Response and Creep Properties of Elektron21 Alloy Reinforced by AlN NanoparticlesSaboori, A.,Papovano, E.,Pavese, M.,Dieringa, H.,Badini, C. (2017)
In: Materials, Vol. 10, , , 12, 1380.
Zur Publikation beim Verlag
journal article
Mechanism of Dynamic Recrystallization and Evolution of Texture in the Hot Working Domains of the Processing Map for Mg-4Al-2Ba-2Ca AlloySuresh, K.,Rao, K.P.,Prasad, Y.V.R.K.,Wu, C.-M.,Hort, N.,Dieringa, H. (2017)
In: Metals, Vol. 7, , , 12, 539.
Zur Publikation beim Verlag
conference lecture (invited): Kovalem (IND); 14.-16.12.2017
Recent Advances in Magnesium Alloys for Aerospace ApplicationsKainer, K.U.,Dieringa, H. (2017)
In: International Conference on Advanced Materials and Processes, ADMAT 2017, Vol. , Kovalem (IND), 14.-16.12.2017, , .
conference lecture (invited): Nagercoil (IND); 14.12.2017
Metallic Light Weight Materials for New Vehicle ConceptsKainer, K.U.,Dieringa, H. (2017)
In: International Seminar VINS Christian College of Engineering, Vol. , Nagercoil (IND), 14.12.2017, , .
journal article
Ultrasound Assisted Casting of an AM60 Based Metal Matrix Nanocomposite, Its Properties, and RecyclabilityDieringa, H.,Katsarou, L.,Buzolin, R.,Szakacs, G.,Horstmann, M.,Wolff, M.,Mendis, C.,Vorozhtsov, S.,John, D.St. (2017)
In: Metals, Vol. 7, , , 10, 388.
Zur Publikation beim Verlag

journal article
Creep behavior of Mg–10Gd–xZn (x=2 and 6wt%) alloysSrinivasan, A.,Dieringa, H.,Mendis, C.L.,Huang, Y.,Rajesh Kumar, R.,Kainer, K.U.,Hort, N. (2016)
In: Materials Science and Engineering A, Vol. 649, , , , 158-167.
Zur Publikation beim Verlag | Zur Publikation
journal article
Corrosion fatigue assessment of creep-resistant magnesium alloy Mg–4Al–2Ba–2Ca in aqueous sodium chloride solutionWittke, P.,Klein, M.,Dieringa, H.,Walther, F. (2016)
In: International Journal of Fatigue, Vol. 83, , , 1, 59-65.
Zur Publikation beim Verlag
conference lecture (invited): Chennai (IND); 04.-06.02.2016
Mechanical property enhancement of magnesium alloys by reinforcing with nanoparticles: A reviewDieringa, H.,Hort, N.,Kainer, K.U. (2016)
In: International Conference and Expo on Magnesium, iMagCon 2016, Vol. , Chennai (IND), 04.-06.02.2016, , .
journal article
Microstructure, mechanical properties and creep of magnesium alloy Elektron21 reinforced with AlN nanoparticles by ultrasound-assisted stirringKatsarou, L.,Mounib, M.,Lefebvre, W.,Vorozhtsov, S.,Pavese, M.,Badini, C.,Molina-Aldareguia, J.M.,Jimenez, C.C.,Perez Prado, M.T.,Dieringa, H. (2016)
In: Materials Science and Engineering A, Vol. 659, , , , 84-92.
Zur Publikation beim Verlag
book part
Materials - Metal Matrix CompositesDieringa, H.,Ibe, G.,Kainer, K.U. (2016)
In: Ullmann's Encyclopedia of Industrial Chemistry, Vol. , , , , .
Zur Publikation beim Verlag
conference lecture: Venedig (I); 22.-23.062016
Protecting molten Magnesium and its alloysHort, N.,Wiese, B.,Dieringa, H.,Kainer, K.U. (2016)
In: High Tech Die Casting, HTDC 2016, Vol. , Venedig (I), 22.-23.062016, , .
journal article
Protecting molten Magnesium and its alloysHort, N.,Wiese, B.,Dieringa, H.,Kainer, K.U. (2016)
In: Metallurgia Italiana, Vol. , , , 6, 105-108.
conference lecture (invited): Wuerzburg (D); 01.-02.06.2016
Magnesiumlegierungen im Leichtbau – Anwendungen, Eigenschaften, Vor- und NachteileDieringa, H. (2016)
In: Anwendertreff Leichtbau, Vol. , Wuerzburg (D), 01.-02.06.2016, , .
conference lecture (invited): Darmstadt (D); 26.09.2016
Entwicklung der internationalen Magnesium-Industrie und Produktionstechnologie ab den 1930er Jahren bis ins „Wirtschaftswunder"Kainer, K.U.,Dieringa, H. (2016)
In: DGM Tag 2016, Vol. , Darmstadt (D), 26.09.2016, , .
conference paper: Chiang Mai (THA); 13.-16.12.2016
High Temperature Deformation Behavior of a Newly Developed Mg Alloy Containing Al, Ba and CaRao, K.P.,Lam, S.W.,Hort, N.,Dieringa, H. (2016)
In: Proceedings of 7th TSME International Conference on Mechanical Engineering, ICoME 2016, Vol. , Chiang Mai (THA), 13.-16.12.2016, , 108-113.
conference lecture: Hiroshima (J); 04.-08.12.2016
High Temperature Deformation of Cast ZW11 Magnesium Alloy with Very Large Grain SizeRao, K.P.,Bagheripoor, M.,Dieringa, H.,Hort, N. (2016)
In: 13th Asia-Pacific Symposium on Engineering Plasticity and its Applications, AEPA 2016, Vol. , Hiroshima (J), 04.-08.12.2016, , .
journal article
Impression creep behaviour of squeeze-cast Ca and Sb added AZ91 magnesium alloyBankoti, A.K.S.,Mondal, A.K.,Dieringa, H.,Ray, B.C.,Kumar, S. (2016)
In: Materials Science and Engineering A, Vol. 673, , , , 332-345.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Kyoto (J); 01.-05.08.2016
High Temperature Deformation Processing of Dilute Magnesium Alloy Z1 for Bioimplant ApplicationRao, K.P.,Bagheripoor, M.,Dieringa, H.,Hort, N. (2016)
In: 9th Pacific Rim International Conference Advanced Materials and Processing, PRICM 9, Vol. , Kyoto (J), 01.-05.08.2016, , .
conference paper: Kyoto (J); 01.-05.08.2016
High Temperature Deformation Processing of Dilute Magnesium Alloy Z1 for Bioimplant ApplicationRao, K.P.,Bagheripoor, M.,Dieringa, H.,Hort, N. (2016)
In: Proceedings of 9th Pacific Rim International Conference Advanced Materials and Processing, PRICM 9, Vol. , Kyoto (J), 01.-05.08.2016, , 390-394.
conference lecture: Chiang Mai (THA); 13.-16.12.2016
High Temperature Deformation Behavior of a Newly Developed Mg Alloy Containing Al, Ba and CaRao, K.P.,Lam, S.W.,Hort, N.,Dieringa, H. (2016)
In: 7th TSME International Conference on Mechanical Engineering, ICoME 2016, Vol. , Chiang Mai (THA), 13.-16.12.2016, , .
journal article
Magnesiumlegierungen im LeichtbauDieringa, H.,Bohlen, J. (2016)
In: Konstruktionspraxis : Alles, was der Konstrukteur braucht, Vol. 10, , , , 24-25.

journal article
Twin-roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiCDieringa, H.,Das, S.,Eskin, D.,Fan, Z.,Katsarou, L.,Horstmann, M.,Kurz, G.,Mendis, C.,Hort, N.,Kainer, K.U. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, , , , 35-40.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Port Elizabeth (ZA); 27.-29.07.2015
Twin-roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiCDieringa, H.,Das, S.,Eskin, D.,Fan, Z.,Katsarou, L.,Horstmann, M.,Kurz, G.,Mendis, C.,Hort, N.,Kainer, K.U. (2015)
In: 7th Internaternational Light Metals Technology Conference, LMT 2015, Vol. , Port Elizabeth (ZA), 27.-29.07.2015, , .
conference paper: Port Elizabeth (ZA); 27.-29.07.2015
Twin-roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiCDieringa, H.,Das, S.,Eskin, D.,Fan, Z.,Katsarou, L.,Horstmann, M.,Kurz, G.,Mendis, C.,Hort, N.,Kainer, K.U. (2015)
In: Light Metals Technology 2015, 7th Internaternational Light Metals Technology Conference, LMT 2015, Vol. , Port Elizabeth (ZA), 27.-29.07.2015, , 35-40.
journal article
Magnesium Melt ProtectionHort, N.,Wiese, B.,Dieringa, H.,Kainer, K.U. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, , , , 78-81.
Zur Publikation beim Verlag | Zur Publikation
journal article
Deformation-induced dynamic precipitation during creep in magnesium-tin alloysHuang, Y.,Dieringa, H.,Kainer, K.U.,Hort, N. (2015)
In: Key Engineering Materials, Advances in Fracture and Damage Mechanics XIII, Vol. 627, , , , 365-368.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Port Elizabeth (ZA); 27.-29.07.2015
Magnesium Melt ProtectionHort, N.,Wiese, B.,Dieringa, H.,Kainer, K.U. (2015)
In: 7th Internaternational Light Metals Technology Conference, LMT 2015, Vol. , Port Elizabeth (ZA), 27.-29.07.2015, , .
journal article
Investigation on mechanical properties and creep behavior of stir cast AZ91-SiCp compositesViswanath, A.,Dieringa, H.,Kumar, K.K.A.,Pillai, U.T.S.,Pai, B.C. (2015)
In: Journal of Magnesium and Alloys, Vol. 3, , , 1, 16-22.
Zur Publikation beim Verlag
conference paper: Orlando, FL (USA); 15.-19.03.2015
Microstructure and Properties of Magnesium Alloy Mg-1Zn-1Ca (ZX11)Katsarou, L.,Suresh, K.,Rao, K.P.,Hort, N.,Blawert, C.,Mendis, C.,Dieringa, H. (2015)
In: Collected Proceedings, 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology 2015, Vol. , Orlando, FL (USA), 15.-19.03.2015, , 419-423.
conference lecture: Orlando, FL (USA); 15.-19.03.2015
Microstructure and Properties of Magnesium Alloy Mg-1Zn-1Ca (ZX11)Katsarou, L.,Suresh, K.,Rao, K.P.,Hort, N.,Blawert, C.,Mendis, C.,Dieringa, H. (2015)
In: 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology, Vol. , Orlando, FL (USA), 15.-19.03.2015, , .
journal article
Correlation of microstructure and creep behaviour of MRI230D Mg alloy developed by two different casting technologiesMondal, A.K.,Kesavan, A.R.,Reddy, B.R.K.,Dieringa, H.,Kumar, S. (2015)
In: Materials Science and Engineering A, Vol. 631, , , , 45-51.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Kopenhagen (DK); 19.-24.07.2015
Magnesium Alloy Elektron21 Reinforced with ALN: Processing, Microstructure and Compression Creep ResponseKatsarou, L.,Mounib, M.,Lefebvre, W.,Dieringa, H. (2015)
In: 20th International Conference on Composite Materials, ICCM 20, Vol. , Kopenhagen (DK), 19.-24.07.2015, , .
conference lecture: Jeju (ROK); 11.-16.10.2015
Development and Characterization of a New Mg-Sn-Y Alloy and its NanocompositeSeetharaman, S.,Dieringa, H.,Kainer, K.U.,Gupta, M. (2015)
In: Proceedings of 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Vol. , Jeju (ROK), 11.-16.10.2015, , 872-878.
conference paper: Port Elizabeth (ZA); 27.-29.07.2015
Magnesium Melt ProtectionHort, N.,Wiese, B.,Dieringa, H.,Kainer, K.U. (2015)
In: Light Metals Technology 2015, 7th Internaternational Light Metals Technology Conference, LMT 2015, Vol. , Port Elizabeth (ZA), 27.-29.07.2015, , 78-81.
journal article
Schutz von MagnesiumschmelzenWiese, B.,Hort, N.,Dieringa, H.,Kainer, K.U. (2015)
In: Giesserei-Praxis : Fachzeitschrift fuer alle Bereiche der Giessereitechnik, Vol. 66, , , 12, 601-603.
conference paper: Jeju (ROK); 11.-16.10.2015
Microstructural Response to Hot Working of Mg-4Al-2Ba-1Ca (ABaX421) as Revealed by Processing MapRao, K.P.,Suresh, K.,Prasad, Y.V.R.K.,Hort, N.,Dieringa, H. (2015)
In: Proceedings of 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Vol. , Jeju (ROK), 11.-16.10.2015, , 97-104.
conference lecture: Jeju (ROK); 11.-16.10.2015
Microstructural Response to Hot Working of Mg-4Al-2Ba-1Ca (ABaX421) as Revealed by Processing MapRao, K.P.,Suresh, K.,Prasad, Y.V.R.K.,Hort, N.,Dieringa, H. (2015)
In: 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Vol. , Jeju (ROK), 11.-16.10.2015, , .
conference lecture: Jeju (ROK); 11.-16.10.2015
Development and Characterization of a New Mg-Sn-Y Alloy and its NanocompositeSeetharaman, S.,Dieringa, H.,Kainer, K.U.,Gupta, M. (2015)
In: 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Vol. , Jeju (ROK), 11.-16.10.2015, , .
journal article
Aqueous corrosion behavior of creep resistant Mg-Al-Ba-Ca alloys in sodium chloride solutionsZander, D.,Zumdick, N.A.,Schnatterer, C.,Dieringa, H. (2015)
In: Materials and Corrosion, Vol. 66, , , 11, 1315-1325.
Zur Publikation beim Verlag
conference paper: Kopenhagen (DK); 19.-24.07.2015
Magnesium Alloy Elektron21 Reinforced with ALN: Processing, Microstructure and Compression Creep ResponseKatsarou, L.,Mounib, M.,Lefebvre, W.,Dieringa, H. (2015)
In: Proceedings of 20th International Conference on Composite Materials, ICCM 20, Vol. , Kopenhagen (DK), 19.-24.07.2015, , .
conference lecture (invited): Warschau (PL); 20.-24.09.2015
Magnesium Matrix Composites - Challenges and OpportunitiesKainer, K.U.,Dieringa, H.,Hort, N. (2015)
In: European Congress and Exhibition on Advanced Materials and Processes, EUROMAT 2015, Vol. , Warschau (PL), 20.-24.09.2015, , .
conference lecture: Dresden (D); 14.-17.09.2015
Herstellung, Mikrostruktur und Druckkriechverhalten der nanopartikelverstaerkten Magnesiumlegierung Elektron21Katsarou, L.,Dieringa, H.,Mounib, M.,Lefebvre, W. (2015)
In: Werkstoffwoche 2015, Vol. , Dresden (D), 14.-17.09.2015, , .
journal article
High temperature mechanical behavior of an extruded Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloyYu, Z.,Huang, Y.,Dieringa, H.,Mendis, C.L.,Guan, R.,Hort, N.,Meng, J. (2015)
In: Materials Science and Engineering A, Vol. 645, , , , 213-224.
Zur Publikation beim Verlag

journal article
The ExoMet Project: EU/ESA Research on High-Performance Light-Metal Alloys and NanocompositesSillekens, W.H.,Jarvis, D.J.,Vorozhtsov, A.,Bojarevics, V.,Badini, C.F.,Pavese, M.,Terzi, S.,Salvo, L.,Katsarou, L.,Dieringa, H. (2014)
In: Metallurgical and Materials Transactions A, Vol. 45, , , 8, 3349-3361.
Zur Publikation beim Verlag
book part
Advances in manufacturing processes for magnesium alloysDieringa, H.,Hort, N.,Bohlen, J.,Letzig, D.,Kainer, K.U. (2014)
In: Essential Readings in Magnesium Technology, Vol. , , , , 19-24.
conference lecture: St. Julians (M); 13.-19.07.2014
Magnesium Matrix Composites for Transportation IndustriesKainer, K.U.,Dieringa, H.,Hort, N. (2014)
In: 22nd Annual International Conference on Composites/Nanoengineering, ICCE 22, Vol. , St. Julians (M), 13.-19.07.2014, , .
conference lecture (invited): Dresden (D); 25.-27.06.2014
Potenzial von Magnesium-Werkstoffen fuer den nachhaltigen LeichtbauKainer, K.U.,Dieringa, H. (2014)
In: 18. Internationales Dresdener Leichtbausymposium, Vol. , Dresden (D), 25.-27.06.2014, , .
journal article
Reactivity and Microstructure of Al2O3-Reinforced Magnesium-Matrix CompositesMounib, M.,Pavese, M.,Badini, C.,Lefebvre, W.,Dieringa, H. (2014)
In: Advances in Materials Science and Engineering, Vol. , , , , 476079.
Zur Publikation beim Verlag
conference lecture (invited): Dortmund (D); 30.09.-01.10.2014
Neuentwicklungen im Bereich der Magnesiumlegierungen und MagnesiumkompositeDieringa, H. (2014)
In: 1. Dortmunder Werkstoff-Forum 2014, Vol. , Dortmund (D), 30.09.-01.10.2014, , .
journal article
Microstructure and Compression Creep Strength of the Newly Developed Magnesium Alloy DieMag422Dieringa, H.,Hort, N.,Kainer, K.U. (2014)
In: Advanced Materials Research, AMI Light Metals Conference 2014, Vol. 1019, , , , 177-183.
Zur Publikation beim Verlag | Zur Publikation
conference lecture (invited): Kwa Maritane Bush Lodge (ZA); 15.-17.10.2014
Microstructure and Compression Creep Strength of the Newly Developed Magnesium Alloy DieMag422Dieringa, H.,Hort, N.,Kainer, K.U. (2014)
In: Light Metals Conference 2014, Vol. , Kwa Maritane Bush Lodge (ZA), 15.-17.10.2014, , .
conference lecture: Portoroz (SLO); 20.-22.10.2014
Processing and compression creep response of AlN reinforced magnesium alloy Elektron21Katsarou, L.,Vorozhtsov, A.,Dieringa, H. (2014)
In: 22nd International Conference on Materials and Technology, Vol. , Portoroz (SLO), 20.-22.10.2014, , .
conference poster: Kwa Maritane Bush Lodge (ZA); 15.-17.10.2014
Mechanical Properties and Microstructures of Nano SiC Reinforced ZE10 Composites Prepared with Ultrasonic VibrationSong, J.,Dieringa, H.,Huang, Y.,Gan, W.,Kainer, K.U.,Hort, N. (2014)
In: Light Metals Conference 2014, Vol. , Kwa Maritane Bush Lodge (ZA), 15.-17.10.2014, , .
journal article
Mechanical Properties and Microstructures of Nano SiC Reinforced ZE10 Composites Prepared with Ultrasonic VibrationSong, J.,Dieringa, H.,Huang, Y.,Gan, W.,Kainer, K.U.,Hort, N. (2014)
In: Advanced Materials Research, AMI Light Metals Conference 2014, Vol. 1019, , , , 169-176.
Zur Publikation beim Verlag | Zur Publikation
journal article
Understanding effects of microstructural inhomogeneity on creep response – New approaches to improve the creep resistance in magnesium alloysHuang, Y.,Dieringa, H.,Kainer, K.U.,Hort, N. (2014)
In: Journal of Magnesium and Alloys, Vol. 2, , , 2, 124-132.
Zur Publikation beim Verlag
journal article
Microstructure-based characterization of the corrosion behavior of the creep resistant Mg–Al–Ba–Ca alloy DieMag422Klein, M.,Kuhlmann, F.,Wittke, P.,Dieringa, H.,Walther, F. (2014)
In: Materials and Corrosion, Vol. 65, , , 10, 991-998.
Zur Publikation beim Verlag
conference lecture: St. Julians (M); 13.-19.07.2014
Magnesium Matrix Composites for Transportation IndustriesKainer, K.U.,Dieringa, H.,Hort, N. (2014)
In: Proceedings of 22nd Annual International Conference on Composites/Nanoengineering, ICCE 22, Vol. , St. Julians (M), 13.-19.07.2014, , 429-430.
conference lecture: Ponta Delgado, Sao Miguel (P); 23.-25.09.2014
Deformation-induced dynamic precipitation during creep in magnesium-tin alloysHuang, Y.,Dieringa, H.,Kainer, K.U.,Hort, N. (2014)
In: 13th International Conference on Fracture and Damage Mechanics, FDM 2014, Vol. , Ponta Delgado, Sao Miguel (P), 23.-25.09.2014, , .

book part
Magnesiumlegierungen und -Matrix VerbundwerkstoffeEvertz, T.,Flaxa, V.,Georgeou, Z.,Gronebaum, R.-H.,Kwiaton, N.,Lesch, C.,Otto, M.,Schoettler, J.,Schulz, T.,Springub, B.,Furrer, P.,Mueller, A.,Dieringa, H.,Kainer, K.U.,Leyens, C.,Peters, M.,Gadow, R.,Drechsler, K.,Ziegmann, G. (2013)
In: Leichtbau in der Fahrzeugtechnik, Vol. , , , , 314-336.
journal article
Microstructure, Mechanical and Corrosion Properties of Mg-Gd-Zn AlloysSrinivasan, A.,Huang, Y.,Mendis, C.,Dieringa, H.,Blawert, C.,Kainer, K.U.,Hort, N. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, , , , 28-32.
Zur Publikation beim Verlag | Zur Publikation
journal article
Development of a magnesium secondary alloy system for mixed magnesium post-consumer scrapFechner, D.,Blawert, C.,Hort, N.,Dieringa, H.,Kainer, K.U. (2013)
In: Materials Science and Engineering A, Vol. 576, , , , 222-230.
Zur Publikation beim Verlag | Zur Publikation
conference poster: Paris (F); 08.-11.07.2013
Effect of gadolinium content on the corrosion behaviour of magnesium alloys in 1% NaCl solutionHamdani, M.,Zidane, N.,Ait Addi, A.,Douch, J.,Dietzel, W.,Dieringa, H.,Hort, N. (2013)
In: Proceedings of Journees Electrochimie 2013, Vol. , Paris (F), 08.-11.07.2013, , 212.
journal article
Effects of Sn segregation and precipitates on creep response of Mg-Sn alloysHuang, Y.,Dieringa, H.,Kainer, K.U.,Hort, N. (2013)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 36, , , 4, 308-315.
Zur Publikation beim Verlag
journal article
Compression-creep response of magnesium alloy DieMag422 containing barium compared with the commercial creep-resistant alloys AE42 and MRI230DDieringa, H.,Huang, Y.,Wittke, P.,Klein, M.,Walther, F.,Dikovits, M.,Poletti, C. (2013)
In: Materials Science and Engineering A, Vol. 585, , , , 430-438.
Zur Publikation beim Verlag | Zur Publikation
report part
Life Cycle Assessment of Magnesium Components in Vehicle ConstructionEhrenberger, S.,Dieringa, H.,Friedrich, H. (2013)
In: Study of Life cycle Assessment (LCA )of Magnesium in Vehicle Construction by International Magnesium Association (IMA), IMA LCA Study, Vol. , , , , .
conference lecture: Bremen (D); 03.-05.09.2013
Hot deformation studies of a creep resistant Mg alloy DieMag422Dikovits, M.,Mitsche, S.,Dieringa, H.,Poletti, C. (2013)
In: International Congress and Exhibition on Light Materials Aluminium, Magnesium, Titanium and their Alloys, Euro LightMAT 2013, Vol. , Bremen (D), 03.-05.09.2013, , .
conference lecture: Aachen (D); 09.-11.09.2013
Influence of Corrosion on Fatigue Properties of New Creep-Resistant Magnesium Alloy DIEMAG422Klein, M.,Wittke, P.,Dieringa, H.,Walther, F. (2013)
In: 7th International Conference on Low Cycle Fatigue, Vol. , Aachen (D), 09.-11.09.2013, , .
conference lecture: Aachen (D); 09.-11.09.2013
Influence of Corrosion on Fatigue Properties of New Creep-Resistant Magnesium Alloy DIEMAG422Klein, M.,Wittke, P.,Dieringa, H.,Walther, F. (2013)
In: Proceedings of 7th International Conference on Low Cycle Fatigue, Vol. , Aachen (D), 09.-11.09.2013, , 319-324.
conference paper: Old Windsor (GB); 24.-26.07.2013
Creep Behaviour Under Compressive Stresses of Calcium and Barium Containing Mg-Al-based Die Casting AlloysDieringa, H.,Zander, D.,Gibson, M.A. (2013)
In: Light Metals Technology 2013, 6th Internaternational Light Metals Technology Conference, LMT 2013, Vol. , Old Windsor (GB), 24.-26.07.2013, , 69-76.
conference paper: Old Windsor (GB); 24.-26.07.2013
Microstructure, Mechanical and Corrosion Properties of Mg-Gd-Zn AlloysSrinivasan, A.,Huang, Y.,Mendis, C.,Dieringa, H.,Blawert, C.,Kainer, K.U.,Hort, N. (2013)
In: Light Metals Technology 2013, 6th Internaternational Light Metals Technology Conference, LMT 2013, Vol. , Old Windsor (GB), 24.-26.07.2013, , 28-32.
journal article
Creep Behaviour Under Compressive Stresses of Calcium and Barium Containing Mg-Al-based Die Casting AlloysDieringa, H.,Zander, D.,Gibson, M.A. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, , , , 69-73.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Old Windsor (GB); 24.-26.07.2013
Microstructure, Mechanical and Corrosion Properties of Mg-Gd-Zn AlloysSrinivasan, A.,Huang, Y.,Mendis, C.,Dieringa, H.,Blawert, C.,Kainer, K.U.,Hort, N. (2013)
In: 6th Internaternational Light Metals Technology Conference, LMT 2013, Vol. , Old Windsor (GB), 24.-26.07.2013, , .
book part
Applications: magnesium-based metal matrix composites (MMCs)Dieringa, H. (2013)
In: Fundamentals of Magnesium Alloy Metallurgy, Vol. , , , , 317-341.
Zur Publikation beim Verlag
conference lecture: Bellevue, WA (USA); 02.-05.2013
Magnesium Alloys in AerospaceDieringa, H.,Hort, N.,Kainer, K.U. (2013)
In: AeroMat 2013, Vol. , Bellevue, WA (USA), 02.-05.2013, , .
conference lecture: Wildau (D); 07.03.2013
Magnesium im Flugzeug - Gestern und heuteDieringa, H. (2013)
In: Forum Leichtbau 2013, Vol. , Wildau (D), 07.03.2013, , .
conference lecture: Old Windsor (GB); 24.-26.07.2013
Creep Behaviour Under Compressive Stresses of Calcium and Barium Containing Mg-Al-based Die Casting AlloysDieringa, H.,Zander, D.,Gibson, M.A. (2013)
In: 6th Internaternational Light Metals Technology Conference, LMT 2013, Vol. , Old Windsor (GB), 24.-26.07.2013, , .
conference poster: Paris (F); 08.-11.07.2013
Effect of gadolinium content on the corrosion behaviour of magnesium alloys in 1% NaCl solutionHamdani, M.,Zidane, N.,Ait Addi, A.,Douch, J.,Dietzel, W.,Dieringa, H.,Hort, N. (2013)
In: Journees Electrochimie 2013, Vol. , Paris (F), 08.-11.07.2013, , .

conference paper: Orlando, FL (USA); 11.-15.03.2012
Microstructure and Creep Properties of MEZ Magnesium Alloy Processed by ThixocastingMorales Garza, E.D.,Dieringa, H.,Hort, N.,Kainer, K.U. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Vol. , Orlando, FL (USA), 11.-15.03.2012, , 385-389.
journal article
The formation of Sr6.33Mg16.67Si13 in magnesium alloy AM50 and its effect on mechanical propertiesFechner, D.,Hort, N.,Blawert, C.,Dieringa, H.,Stoermer, M.,Kainer, K.U. (2012)
In: Journal of Materials Science, Vol. 47, , , 14, 5461-5469.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Vancouver (CDN); 08.-12.07.2012
Creep behavior of magnesium alloy ZE10 reinforced with ceria and produced using ultrasonic stirringDieringa, H. (2012)
In: 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vol. , Vancouver (CDN), 08.-12.07.2012, , .
conference lecture: Orlando, FL (USA); 11.-15.03.2012
Microstructure and Creep Properties of MEZ Magnesium Alloy Processed by ThixocastingMorales Garza, E.D.,Dieringa, H.,Hort, N.,Kainer, K.U. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Vol. , Orlando, FL (USA), 11.-15.03.2012, , .
journal article
Magnesium Matrix Composites: State-of the-art and what’s the futureDieringa, H.,Kainer, K.U. (2012)
In: Advanced Materials Research, Processing and Fabrication of Advanced Materials, Vol. 410, , , , 275-278.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Orlando, FL (USA); 11.-15.03.2012
Mechanical and Corrosion Properties of As-Cast and Extruded Mg10gd Alloy for Biomedical ApplicationMaier, P.,Mueller, S.,Dieringa, H.,Hort, N. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Vol. , Orlando, FL (USA), 11.-15.03.2012, , .
conference paper: Orlando, FL (USA); 11.-15.03.2012
Mechanical and Corrosion Properties of As-Cast and Extruded Mg10gd Alloy for Biomedical ApplicationMaier, P.,Mueller, S.,Dieringa, H.,Hort, N. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Vol. , Orlando, FL (USA), 11.-15.03.2012, , 253-259.
conference paper: Hong Kong (VRC); 15.-18.12.2011
Magnesium Matrix Composites: State-of the-art and what’s the futureDieringa, H.,Kainer, K.U. (2012)
In: Processing and Fabrication of Advanced Materials, Selected, Peer Reviewed Papers from the 20th International Symposium on Processing and Fabrication of Advanced Materials, PFAM XX, Vol. 410, Hong Kong (VRC), 15.-18.12.2011, , 275-278.
conference lecture (invited): Cottbus (D); 22.-24.05.2012
Neuere Entwicklungen bei Magnesiumlegierungen und magnesiumbasierten VerbundwerkstoffenDieringa, H. (2012)
In: Hochleistungsverfahren und Hochleistungswerkstoffe, 10. Cottbuser Leichtbauworkshop, Vol. , Cottbus (D), 22.-24.05.2012, , .
conference lecture: Venedig (I); 24.-28.06.2012
Ultrasonic Stirring as a Production Process for Nanoparticle Reinforced Magnesium Alloys and the Compression Creep Response of Ze10 Reinforced with Ceria NanoparticlesDieringa, H.,Hort, N.,Kainer, K.U. (2012)
In: 15th European Conference on Composite Materials, ECCM 15, Vol. , Venedig (I), 24.-28.06.2012, , .
conference lecture: Venedig (I); 24.-28.06.2012
Ultrasonic Stirring as a Production Process for Nanoparticle Reinforced Magnesium Alloys and the Compression Creep Response of Ze10 Reinforced with Ceria NanoparticlesDieringa, H.,Hort, N.,Kainer, K.U. (2012)
In: Proceedings of the 15th European Conference on Composite Materials, ECCM 15, Vol. , Venedig (I), 24.-28.06.2012, , .
conference paper: Vancouver (CDN); 08.-12.07.2012
Creep behavior of magnesium alloy ZE10 reinforced with ceria and produced using ultrasonic stirringDieringa, H. (2012)
In: Proceedings of the 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vol. , Vancouver (CDN), 08.-12.07.2012, , 857-862.
conference lecture: Bad Neuenahr (D); 06.-07.12.2012
Einfluss von Korrosion auf das Ermuedungsverhalten der Magnesiumlegierung DieMag422Wittke, P.,Pipetz, A.,Dieringa, H.,Walther, F. (2012)
In: Werkstoffpruefung 2012, Vol. , Bad Neuenahr (D), 06.-07.12.2012, , .
conference paper: Bad Neuenahr (D); 06.-07.12.2012
Einfluss von Korrosion auf das Ermuedungsverhalten der Magnesiumlegierung DieMag422Wittke, P.,Pipetz, A.,Dieringa, H.,Walther, F. (2012)
In: Fortschritte in der Werkstoffpruefung fuer Forschung und Praxis, Tagungsband Werkstoffpruefung 2012, Vol. , Bad Neuenahr (D), 06.-07.12.2012, , 179-186.

conference lecture: Lueneburg (D); 19.-22.07.2011
Compression creep at 240°C of extruded magnesium alloys containing GadoliniumDieringa, H.,Hort, N.,Mueller, S.,Kainer, K.U. (2011)
In: 5th International Light Metals Technology Conference 2011, Vol. , Lueneburg (D), 19.-22.07.2011, , .
journal article
Properties of magnesium alloys reinforced with nanoparticles and carbon nanotubes: a reviewDieringa, H. (2011)
In: Journal of Materials Science, Vol. 46, , , 2, 289-306.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Montpellier (F); 12.-15.09.2011
Compressive creep study of creep resistant magnesium alloys at 200°CDieringa, H. (2011)
In: Euromat 2011, Vol. , Montpellier (F), 12.-15.09.2011, , .
journal article
Compression creep at 240°C of extruded magnesium alloys containing GadoliniumDieringa, H.,Hort, N.,Mueller, S.,Kainer, K.U. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, , , , 270-273.
Zur Publikation beim Verlag | Zur Publikation
conference paper: Lueneburg (D); 19.-22.07.2011
Compression creep at 240°C of extruded magnesium alloys containing GadoliniumDieringa, H.,Hort, N.,Kainer, K.U. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Vol. , Lueneburg (D), 19.-22.07.2011, , 270-273.
conference lecture (invited): Quebec (CDN); 01.-05.08.2011
Past and Possible Future for Magnesium Alloys in Aerospace IndustriesKainer, K.U.,Dieringa, H. (2011)
In: Internationale Conference on Processing & Manufacturing of Advanced Materials, THERMEC 2011, Vol. , Quebec (CDN), 01.-05.08.2011, , .
conference lecture: Hong Kong (VRC); 15.-18.12.2011
Magnesium Matrix Composites: State-of the-art and what’s the futureDieringa, H.,Kainer, K.U. (2011)
In: 20th International Symposium on Processing and Fabrication of Advanced Materials, PFAM XX, Vol. , Hong Kong (VRC), 15.-18.12.2011, , .

conference paper: Weimar (D); 26.-29.10.2009
Barium as alloying element for a creep resistant magnesium alloyDieringa, H.,Hort, N.,Kainer, K.U. (2010)
In: Magnesium, 8th International Conference on Magnesium Alloys and their Applications, Magnesium 2009, Vol. , Weimar (D), 26.-29.10.2009, , 62-67.
journal article
Status of the Development of Creep Resistant Magnesium Materials for Automotive ApplicationsKainer, K.U.,Huang, Y.,Dieringa, H.,Hort, N. (2010)
In: Materials Science Forum, THERMEC 2009, Vol. 638-642, , , , 73-80.
Zur Publikation beim Verlag | Zur Publikation
conference lecture: Detroit, MI (USA); 13.-15.04.2010
Bolt load retention and creep response of AS41 alloyed with 0.15% CaAnopuo, O.,Huang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2010)
In: SAE 2010 World Congress & Exhibition, Vol. , Detroit, MI (USA), 13.-15.04.2010, , .
conference lecture: Seattle, WA (USA); 14.-18.02.2010
Approaching Bolt Load Retention Behaviour of AS41 Through Compliance and Creep DeformationAnopuo, O.,Huang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2010)
In: TMS Annual Meeting 2010, Vol. , Seattle, WA (USA), 14.-18.02.2010, , .
conference paper: Seattle, WA (USA); 14.-18.02.2010
Approaching Bolt Load Retention Behaviour of AS41 Through Compliance and Creep DeformationAnopuo, O.,Huang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Vol. , Seattle, WA (USA), 14.-18.02.2010, , 215-220.
journal article
Interrupted creep behaviour of Mg alloys developed for powertrain applicationsMondal, A.K.,Fechner, D.,Kumar, S.,Dieringa, H.,Maier, P.,Kainer, K.U. (2010)
In: Materials Science and Engineering A, Vol. 527, , , 9, 2289-2296.
Zur Publikation beim Verlag
conference paper: Detroit, MI (USA); 13.-15.04.2010
Bolt load retention and creep response of AS41 alloyed with 0.15% CaAnopuo, O.,Huang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2010)
In: Advances In Light Weight Materials – Aluminum, Casting Materials, and Magnesium Technologies, 2010, SAE 2010 World Congress & Exhibition, Vol. SP 2294, Detroit, MI (USA), 13.-15.04.2010, , 0404.
Zur Publikation beim Verlag
journal article
Bolt Load Retention and Creep Response of AS41 Alloyed with 0.15 % CaAnopuo, O.,Huang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2010)
In: The SAE International Journal of Materials and Manufacturing, Vol. 3, , , 1, 202-210.
conference lecture: Trivandrum (IND); 02.11.2010
Nanoparticle Reinforced MagnesiumDieringa, H. (2010)
In: Seminar at the National Institute for Interdisciplinary Science and Technology, Vol. , Trivandrum (IND), 02.11.2010, , .
conference lecture (invited): Chunkankadai (IND); 01.11.2010
Magnesium Alloys and Magnesium Based MMCs for Structural Aerospace ApplicationsDieringa, H. (2010)
In: International Symposium on Advanced Science and Technology, Vol. , Chunkankadai (IND), 01.11.2010, , .
conference lecture (invited): Trivandrum (IND); 29.-31.10.2010
New developments in creep resistant magnesium alloys and compositesDieringa, H. (2010)
In: International Conference on Recent Trends in Materials Science and Technology, ICMST 2010, Vol. , Trivandrum (IND), 29.-31.10.2010, , .

journal article
Investigation of minimum creep rates and stress exponents calculated from tensile and compressive creep data of magnesium alloy AE42Dieringa, H.,Hort, N.,Kainer, K.U. (2009)
In: Materials Science and Engineering A, Vol. 510-511, , , , 382-386.
Zur Publikation beim Verlag | Zur Publikation
conference lecture (invited): Taiyuan (VRC); 07.-09.04.2009
Development of advanced magnesium cast alloys and technologiesKainer, K.U.,Hort, N.,Dieringa, H. (2009)
In: IMA 2009 Taiyuan Global Magnesium Conference and Exhibition, Vol. , Taiyuan (VRC), 07.-09.04.2009, , .
lecture: Fachhochschule fuer Angewandte Wissenschaften, FB Maschinenbau und Produktion; SS 2009
Werkstoffkunde und Chemie - ADieringa, H. (2009)
lecture: Fachhochschule fuer Angewandte Wissenschaften, FB Maschinenbau und Produktion; WS 2009-2010
Werkstoffkunde und ChemieDieringa, H. (2009)
conference lecture: Magdeburg (D); 12.02.2009
Technologische Eigenschaften und Potential von Magnesium und MagnesiumlegierungenKainer, K.U.,Dieringa, H. (2009)
In: Magnesiumguss im Fahrzeugbau, VDI Spezialtag, Vol. , Magdeburg (D), 12.02.2009, , .
journal article
Mechanical Properties and Corrosion Performance of AZ-Mg Alloy Modified with Ca and SrAnopuo, O.,Huang, Y.,Dieringa, H.,Hort, N.,Kainer, K.U.,Abdul, K.K. (2009)
In: The SAE International Journal of Materials and Manufacturing, Vol. 1, , , 1, 103-110.
journal article
Technologische Eigenschaften und Potential von MagnesiumlegierungenDieringa, H.,Kainer, K.-U. (2009)
In: Giesserei Rundschau, Vol. 56, , , 7-8, 114-119.
journal article
Neue Entwicklungen bei der Anwendung von MagnesiumlegierungenDieringa, H.,Hort, N.,Kainer, K.U. (2009)
In: Praxis der Naturwissenschaften - Chemie in der Schule, Vol. 58, , , 3, 9-13.
conference lecture (invited): Augsburg (D); 01.-02.07.2009
Magnesiumm Alloys and Magnesium Based MMCs for Structural Aerospace ApplicationsDieringa, H.,Hort, N.,Kainer, K.U. (2009)
In: European Conference on Materials and Structures in Aerospace, EUCOMAS 2009, Vol. , Augsburg (D), 01.-02.07.2009, , .
conference lecture: Edinburgh (GB); 27.-31.07.2009
Mechanical and corrosion behaviour of a hydroxyapatite reinforced magnesium alloy WE43Dieringa, H.,Fuskova, L.,Fechner, D.,Blawert, C. (2009)
In: 17th International Conference on Composite Materials, ICCM 17, Vol. , Edinburgh (GB), 27.-31.07.2009, , .
conference lecture: Weimar (D); 26.-29.10.2009
Barium as alloying element for a creep resistant magnesium alloyDieringa, H.,Hort, N.,Kainer, K.U. (2009)
In: 8th International Conference on Magnesium Alloys and their Applications, Magnesium 2009, Vol. , Weimar (D), 26.-29.10.2009, , .
journal article
Magnesiumoetvoetek technologiai tulajdonsagai es lehetoesegeiDieringa, H.,Kainer, K.U. (2009)
In: Banyaszati es Kohaszati Lapok - Kohaszat, Vol. 142, , , 6, 9-15.
journal article
Local deformation and processing maps of as-cast AZ31 alloyPoletti, C.,Dieringa, H.,Warchomicka, F. (2009)
In: Materials Science and Engineering A, Vol. 516, , , 1-2, 138-147.
Zur Publikation beim Verlag

journal article
Influence of Processing Route on the Properties of Magnesium AlloysFrank, H.,Hort, N.,Dieringa, H.,Kainer, K.U. (2008)
In: Solid State Phenomena, Semi-Solid Processing of Alloys and Composites X, Vol. 141-143, , , , 43-18.
Zur Publikation beim Verlag
conference lecture: Stuttgart (D); 31.03.-01.04.2008
Alloy DevelopmentKainer, K.U.,Dieringa, H.,Hort, N. (2008)
In: 2nd Annual European Magnesium in Automotive Seminar, Vol. , Stuttgart (D), 31.03.-01.04.2008, , .
conference lecture: Paris (F); 31.03.-02.04.2008
Microstructure and Mechanical properties of AlSi9Cu3 Alloy Based Hybrid CompositesHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2008)
In: SAMPE EUROPE 28th International Conference and Forum: Composites Forever, SEICO 08, Vol. , Paris (F), 31.03.-02.04.2008, , .
conference paper: Paris (F); 31.03.-02.04.2008
Microstructure and Mechanical properties of AlSi9Cu3 Alloy Based Hybrid CompositesHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2008)
In: SAMPE EUROPE 28th International Conference and Forum: Composites Forever, SEICO 08, Vol. , Paris (F), 31.03.-02.04.2008, , 398-403.
conference lecture (invited): Chongqing (VRC); 14.-17.04.2008
Tension and Compression Creep Asymmetry in Magnesium Alloy AE42Kainer, K.U.,Dieringa, H.,Hort, N. (2008)
In: 3rd China-Europe Advanced Materials Symposium, Vol. , Chongqing (VRC), 14.-17.04.2008, , .
conference lecture: Detroit, MI (USA); 14.-17.04.2008
Mechanical Properties and Corrosion Performance of AZ-Mg Alloy Modified with Ca and SrAnopuo, O.,Huang, Y.,Dieringa, H.,Hort, N.,Kainer, K.U.,Abdul, K.K. (2008)
In: SAE 2008 World Congress, Vol. , Detroit, MI (USA), 14.-17.04.2008, , .
conference paper: Detroit, MI (USA); 14.-17.04.2008
Mechanical Properties and Corrosion Performance of AZ-Mg Alloy Modified with Ca and SrAnopuo, O.,Huang, Y.,Dieringa, H.,Hort, N.,Kainer, K.U.,Abdul, K.K. (2008)
In: SAE Technical Paper Series, SAE 2008 World Congress, Vol. , Detroit, MI (USA), 14.-17.04.2008, , 01-0372.
conference lecture: Chongqing (VRC); 15.-17.04.2008
Approaches to improve high temperature creep resistance of magnesium alloys by alleviating the segregation of primary alloying elementsHuang, Y.,Dieringa, H.,Hort, N.,Zhen, Z.,Kainer, K.U. (2008)
In: China-Europe Collaboration: 3rd China-Europe Advanced Materials Symposium, CEAM 3, Vol. , Chongqing (VRC), 15.-17.04.2008, , .
conference paper: Chongqing (VRC); 15.-17.04.2008
Approaches to improve high temperature creep resistance of magnesium alloys by alleviating the segregation of primary alloying elementsHuang, Y.,Dieringa, H.,Hort, N.,Zhen, Z.,Kainer, K.U. (2008)
In: China-Europe Collaboration: 3rd China-Europe Advanced Materials Symposium, CEAM 3, Vol. , Chongqing (VRC), 15.-17.04.2008, , 133-137.
conference lecture: Dudelange (L); 21.-22.04.2008
Introduction in Magnesium, Thixomolding and Demands of Automotive IndustryKainer, K.U.,Dieringa, H.,Hort, N. (2008)
In: Husky Metal Molding Day 2008, Vol. , Dudelange (L), 21.-22.04.2008, , .
conference paper: New Orleans, LA (USA); 09.-13.03.2008
Creep and Hot Working Behavior of a new Magnesium Alloy Mg-3Sn-2CaHort, N.,Rao, K.P.,Abu Leil, T.,Dieringa, H.,Prasad, V.Y.R.K.,Kainer, K.U. (2008)
In: Magnesium Technology 2008, TMS Annual Meeting & Exhibition, Vol. , New Orleans, LA (USA), 09.-13.03.2008, , 401-406.
lecture: Fachhochschule fuer Angewandte Wissenschaften, FB Technik und Informatik; SS 2008
Werkstoffkunde und ChemieDieringa, H. (2008)
conference lecture: New Orleans, LA (USA); 09.-13.03.2008
Creep and Hot Working Behavior of a new Magnesium Alloy Mg-3Sn-2CaHort, N.,Rao, K.P.,Abu Leil, T.,Dieringa, H.,Prasad, V.Y.R.K.,Kainer, K.U. (2008)
In: 2008 TMS Annual Meeting & Exhibition, Vol. , New Orleans, LA (USA), 09.-13.03.2008, , .
conference lecture: Bayreuth (D); 04.-09.05.2008
Investigation of minimum creep rates and stress exponents calculated from tensile and compressive creep data of magnesium alloy AE42Dieringa, H.,Hort, N.,Kainer, K.U. (2008)
In: 11th International Conference on Creep and Fracture of Engineering Materials and Structures, CREEP 2008, Vol. , Bayreuth (D), 04.-09.05.2008, , .
journal article
Evolution of microstructure and hardness of AE42 alloy after heat treatmentsHuang, Y.,Dieringa, H.,Hort, N.,Maier, P.,Kainer, K.U.,Liu, Y. (2008)
In: Journal of Alloys and Compounds, Vol. 463, , , 1-2, 238-245.
Zur Publikation beim Verlag
book
Zug- und Druckkriechverhalten von Magnesiumwerkstoffen - Vergleichende Untersuchung der minimalen Kriechraten der verstaerkten und unverstaerkten Magnesiumlegierung AE42Dieringa, H. (2008)
lecture: Fachhochschule fuer Angewandte Wissenschaften, FB Technik und Informatik; WS 2008-2009
Werkstoffkunde und ChemieDieringa, H. (2008)
journal article
Effects of segregation of primary alloying elements on the creep response in magnesium alloysHuang, Y.,Dieringa, H.,Hort, N.,Abu Leil, T.,Kainer, K.U.,Liu, Y. (2008)
In: Scripta Materialia, Vol. 58, , , 10, 894-897.
Zur Publikation beim Verlag

journal article
Thermal cycling behaviour of the magnesium alloy based hybrid composite in transverse directionKumar, S.,Dieringa, H.,Kainer, K.U. (2007)
In: Materials Science and Engineering A, Vol. 454-455, , , , 367-370.
Zur Publikation beim Verlag
conference lecture: Orlando, FL (USA); 25.02.-01.03.2007
Threshold Stress during Tensile and Compressive Creep in AE42 Magnesium AlloyDieringa, H.,Hort, N.,Kainer, K.U. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Vol. , Orlando, FL (USA), 25.02.-01.03.2007, , .
conference paper: Orlando, FL (USA); 25.02.-01.03.2007
Threshold Stress during Tensile and Compressive Creep in AE42 Magnesium AlloyDieringa, H.,Hort, N.,Kainer, K.U. (2007)
In: Magnesium Technology 2007, TMS Annual Meeting & Exhibition, Vol. , Orlando, FL (USA), 25.02.-01.03.2007, , 395-400.
journal article
Magnesium - der Zukunftswerkstoff fuer die Automobilindustrie?Dieringa, H.,Kainer, K.U. (2007)
In: Materialwissenschaft und Werkstofftechnik, Vol. 38, , , 2, 91-96.
Zur Publikation beim Verlag
conference lecture (invited): Orlando, FL (USA); 25.02.-01.03.2007
Advances in Manufacturing Processes for Magnesium AlloysKainer, K.U.,Dieringa, H.,Bohlen, J.,Hort, N.,Letzig, D. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Vol. , Orlando, FL (USA), 25.02.-01.03.2007, , .
conference paper: Orlando, FL (USA); 25.02.-01.03.2007
Advances in Manufacturing Processes for Magnesium AlloysKainer, K.U.,Dieringa, H.,Bohlen, J.,Hort, N.,Letzig, D. (2007)
In: Magnesium Technology 2007, TMS Annual Meeting & Exhibition, Vol. , Orlando, FL (USA), 25.02.-01.03.2007, , 3-8.
journal article
Effect of Heat Treatment on the Microstructure and Creep Behavior of Mg-Sn-Ca AlloysAbu Leil, T.,Huang, Y.,Dieringa, H.,Hort, N.,Kainer, K.U.,Bursik, J.,Jiraskova, Y.,Rao, K.P. (2007)
In: Materials Science Forum, Progress in Light Metals, Aerospace Materials and Superconductors, Vol. 546-549, , , , 69-72.
Zur Publikation beim Verlag
conference lecture: Orlando, FL (USA); 25.02.-01.03.2007
Microstructure, Corrosion and Creep of As-Cast Magnesium Alloys Mg-2Sn-2Ca and Mg-4Sn-2CaAbu Leil, T.,Rao, K.P.,Hort, N.,Huang, Y.,Blawert, C.,Dieringa, H.,Kainer, K.U. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Vol. , Orlando, FL (USA), 25.02.-01.03.2007, , .
conference paper: Dresden (D); 06.-09.11.2006
In Mould Heating of Continuous Carbon Fibre Preforms for Reinforced High Pressure Die Casting Magnesium PartsOberschelp, C.,Klaus, G.,Buehring-Polaczek, A.,Werner, J.,Langkamp, A.,Hufenbach, W.,Hort, N.,Dieringa, H.,Kainer, K.U. (2007)
In: Magnesium, Proceedings of the 7th International Conference on Magnesium Alloys and their Applications, Vol. , Dresden (D), 06.-09.11.2006, , 929-934.
journal article
Microstructure Characterisation and creep properties of AE42 based hybrid composites prepared by squeeze casting processArunachaleswaran, A.,Dhindhaw, B.K.,Dieringa, H.,Hort, N.,Kainer, K.U. (2007)
In: Transactions of the Indian Institute of Metals, Vol. 60, , , 2-3, 87-91.
journal article
Creep behavior of AE42 based hybrid compositesArunachaleswaran, A.,Pereira, I.,Dieringa, H.,Huang, Y.,Hort, N.,Dhindaw, B.K.,Kainer, K.U. (2007)
In: Materials Science and Engineering A, Vol. 460-461, , , , 268-276.
Zur Publikation beim Verlag
conference paper: Orlando, FL (USA); 25.02.-01.03.2007
Microstructure, Corrosion and Creep of As-Cast Magnesium Alloys Mg-2Sn-2Ca and Mg-4Sn-2CaAbu Leil, T.,Rao, K.P.,Hort, N.,Huang, Y.,Blawert, C.,Dieringa, H.,Kainer, K.U. (2007)
In: Magnesium Technology 2007, TMS Annual Meeting & Exhibition, Vol. , Orlando, FL (USA), 25.02.-01.03.2007, , 257-262.
conference lecture: Nuernberg (D); 10.-13.09.2007
Creep rates and stress exponents of unreinforced and short fiber reinforced magnesium alloy AE42Dieringa, H.,Huang, Y.,Hort, N.,Kainer, K.U. (2007)
In: EUROMAT 2007, Vol. , Nuernberg (D), 10.-13.09.2007, , .
conference paper: Singapore (SGP); 17.-19.12.2007
Comparison of tensile and compressive creep data of AE42 magnesium alloy and its short fiber compositeDieringa, H.,Hort, N.,Kainer, K.U. (2007)
In: Processing and Fabrication of Advanced Materials, 16th International Conference, Vol. , Singapore (SGP), 17.-19.12.2007, , 248-255.
conference paper: Singapore (SGP); 17.-19.12.2007
Interrupted creep of newly developed high pressure die cast magnesium alloysFechner, D.,Mondal, A.K.,Kumar, S.,Dieringa, H.,Maier, P.,Kainer, K.U. (2007)
In: Processing and Fabrication of Advanced Materials, 16th International Conference, Vol. , Singapore (SGP), 17.-19.12.2007, , 561-570.
conference lecture: Singapore (SGP); 17.-19.12.2007
Interrupted creep of newly developed high pressure die cast magnesium alloysFechner, D.,Mondal, A.K.,Kumar, S.,Dieringa, H.,Maier, P.,Kainer, K.U. (2007)
In: 16th International Conference on Processing and Fabrication of Advanced Materials, Vol. , Singapore (SGP), 17.-19.12.2007, , .
conference lecture (invited): Trivandrum (IND); 24.-26.10.2007
Minimum creep rates and calculated stress exponents compared in tensile and compressive creep of Saffil short fiber reinforced magnesium alloy AE42Dieringa, H.,Hort, N.,Kainer, K.U. (2007)
In: International Conference on Advanced Materials and Composites, ICAMC 2007, Vol. , Trivandrum (IND), 24.-26.10.2007, , .
conference lecture: Singapore (SGP); 17.-19.12.2007
Comparison of tensile and compressive creep data of AE42 magnesium alloy and its short fiber compositeDieringa, H.,Hort, N.,Kainer, K.U. (2007)
In: 16th International Conference on Processing and Fabrication of Advanced Materials, Vol. , Singapore (SGP), 17.-19.12.2007, , .
conference lecture (invited): Singapore (SGP); 17.-19.12.2007
Magnesium Materials for Transportation IndustriesKainer, K.U.,Dieringa, H.,Hort, N. (2007)
In: 16th International Symposium of Processing and Fabrication of Advanced Materials, PFAM 16, Vol. , Singapore (SGP), 17.-19.12.2007, , .
conference paper: Trivandrum (IND); 24.-26.10.2007
Minimum creep rates and calculated stress exponents compared in tensile and compressive creep of Saffil short fiber reinforced magnesium alloy AE42Dieringa, H.,Hort, N.,Kainer, K.U. (2007)
In: International Conference on Advanced Materials and Composites, ICAMC 2007, Vol. , Trivandrum (IND), 24.-26.10.2007, , .

conference lecture: Montreal (CDN); 01.-04.10.2006
Development and characterization of a series of Mg-Sn-Ca alloysAbu Leil, T.,Rao, K.P.,Hort, N.,Dieringa, H.,Blawert, C.,Huang, Y.,Kainer, K.U. (2006)
In: International Symposium on Magnesium Technology in the Global Age, Vol. , Montreal (CDN), 01.-04.10.2006, , .
conference lecture: Opio (F); 28.05.-02.06.2006
Creep resistant magnesium alloys for power train applicationsFrank, H.,Dieringa, H.,Hort, N.,Kainer, K.U. (2006)
In: MCWASP Conference, Modeling of Casting, Welding and Advanced Soldification Processes XI, Vol. , Opio (F), 28.05.-02.06.2006, , .
conference lecture: San Antonio, TX (USA); 12.-16.03.2006
Effects of Interfacial Reactions During Solidification Process on Mechanical Properties in Short Fiber Reinforced AlSi12CuMgNi CompositesHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2006)
In: TMS 2006: The Rohatgi Honorary Symposium on Solidification Processing of Metal Matrix Composites, Vol. , San Antonio, TX (USA), 12.-16.03.2006, , .
book part
Particles, Fibres and short Fibres for the reinforcement of metal materialsDieringa, H.,Kainer, K.U. (2006)
In: Metal Matrix Composites, Vol. , , , , 55-76.
conference paper: San Antonio, TX (USA); 12.-16.03.2006
Effects of Interfacial Reactions During Solidification Process on Mechanical Properties in Short Fiber Reinforced AlSi12CuMgNi CompositesHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2006)
In: TMS 2006: The Rohatgi Honorary Symposium on Solidification Processing of Metal Matrix Composites, Vol. , San Antonio, TX (USA), 12.-16.03.2006, , 165-172.
conference lecture: Beijing (VRC); 25.-30.06.2006
Effect of Heat Treatment on the Microstructure and Creep Behavior of Mg-Sn-Ca AlloysAbu Leil, T.,Huang, Y.,Dieringa, H.,Hort, N.,Kainer, K.U.,Bursik, J.,Jiraskova, Y.,Rao, K.P. (2006)
In: 2006 Beijing International Materials Week, Vol. , Beijing (VRC), 25.-30.06.2006, , .
conference poster: Lausanne (CH); 04.-08.09.2006
Characterization of a new series of Mg-Sn-Ca alloysAbu Leil, T.,Hort, N.,Dieringa, H.,Blawert, C.,Huang, Y.,Kainer, K.U.,Rao, K.P. (2006)
In: Junior EuroMat 2006, Vol. , Lausanne (CH), 04.-08.09.2006, , .
conference poster: Berlin (D); 07.-09.06.2006
Untersuchungen zum Korrosions- und Kriechverhalten von Mg-Sn-Ca-Legierungen fuer den HochtemperatureinsatzAbu Leil, T.,Hort, N.,Blawert, C.,Huang, Y.,Dieringa, H.,Kainer, K.U. (2006)
In: DGM-Tag 2006, Vol. , Berlin (D), 07.-09.06.2006, , .
conference paper: Opio (F); 28.05.-02.06.2006
The Influence of the Casting Process on the Creep Properties of Different AZ-Based Magnesium AlloysFrank, H.,Dieringa, H.,Hort, N.,Kainer, K.U. (2006)
In: Modeling of Casting, Welding and Advanced Soldification Processes-XI, MCWASP Conference, Vol. , Opio (F), 28.05.-02.06.2006, , 669-676.
conference lecture: Chemnitz (D); 07.-08.09.2006
Magnesium - der Zukunftswerkstoff fuer die AutomobilindustrieDieringa, H.,Kainer, K.U. (2006)
In: 9. Werkstofftechnisches Kolloquium, Verbundwerkstoffe und Werkstoffverbunde, Vol. , Chemnitz (D), 07.-08.09.2006, , .
conference paper: Chemnitz (D); 07.-08.09.2006
Magnesium - der Zukunftswerkstoff fuer die AutomobilindustrieDieringa, H.,Kainer, K.U. (2006)
In: Verbundwerkstoffe und Werkstoffverbunde, 9. Werkstofftechnisches Kolloquium, Vol. , Chemnitz (D), 07.-08.09.2006, , 98-107.
doctoral thesis: TU Hamburg, FB Werkstoffphysik und -technologie
Vergleichende Untersuchungen zum Zug- und Druckkriechverhalten der verstärkten und unverstärkten Magnesiumlegierung AE42 (Dissertation)Dieringa, H. (2006)
conference lecture: Aalen (D); 28.-29.09.2006
Creep rates of tensile and compressive creep of magnesium alloy AE42 as a consequence of different twinning behaviourDieringa, H.,Hort, N.,Maier, P.,Kainer, K.U. (2006)
In: 14th Magnesium Automotive and End User Seminar, Vol. , Aalen (D), 28.-29.09.2006, , .
conference lecture: Dresden (D); 06.-09.11.2006
In Mould Heating of Continuous Carbon Fibre Preforms for Reinforced High Pressure Die Casting Magnesium PartsOberschelp, C.,Klaus, G.,Buehring-Polaczek, A.,Werner, J.,Langkamp, A.,Hufenbach, W.,Hort, N.,Dieringa, H.,Kainer, K.U. (2006)
In: 7th International Conference on Magnesium Alloys and their Applications, Vol. , Dresden (D), 06.-09.11.2006, , .
conference paper: Montreal (CDN); 01.-04.10.2006
Development and characterization of a series of Mg-Sn-Ca alloysAbu Leil, T.,Rao, K.P.,Hort, N.,Dieringa, H.,Blawert, C.,Huang, Y.,Kainer, K.U. (2006)
In: Magnesium Technology in the Global Age, Conference of Metallurgists, COM 2006, Vol. , Montreal (CDN), 01.-04.10.2006, , 739-749.
journal article
Investigations on thermal fatigue of aluminium-and magnesium-alloy based compositesHuang, Y.,Hort, N.,Dieringa, H.,Maier, P.,Kainer, K.U. (2006)
In: International Journal of Fatigue, Vol. 28, , , 10, 1399-1405.
Zur Publikation beim Verlag | Zur Publikation
book part
Magnesium Matrix CompositesHort, N.,Dieringa, H.,Thakur, S.K.,Kainer, K.U. (2006)
In: Magnesium Technology, Metallurgy, Design Data, Applications, Vol. , , , , 315-334.
conference poster: Lausanne (CH); 04.-08.09.2006
A Comparative investigation of the bolt load retention behaviour of some selected Mg-alloysAnopuo, O.,Dieringa, H.,Huang, Y.,Meier, P.,Hort, N.,Kainer, K.U. (2006)
In: Junior EuroMat 2006, Vol. , Lausanne (CH), 04.-08.09.2006, , .
conference paper: Montreal (CDN); 01.-04.10.2006
The Use of Magnesium Alloys: Past, Present and FutureKainer, K.U.,Dieringa, H.,Dietzel, W.,Hort, N.,Blawert, C. (2006)
In: Magnesium Technology in the Global Age, Conference of Metallurgists, COM 2006, Vol. , Montreal (CDN), 01.-04.10.2006, , 3-19.
conference paper: Aalen (D); 28.-29.09.2006
Creep rates of tensile and compressive creep of magnesium alloy AE42 as a consequence of different twinning behaviourDieringa, H.,Hort, N.,Maier, P.,Kainer, K.U. (2006)
In: 14th Magnesium Automotive and End User Seminar, Vol. , Aalen (D), 28.-29.09.2006, , .
conference lecture (invited): Montreal (CDN); 01.-04.10.2006
The Use of Magnesium Alloys: Past, Present and FutureKainer, K.U.,Dieringa, H.,Dietzel, W.,Hort, N.,Blawert, C. (2006)
In: Conference of Metallurgists, COM 2006, Vol. , Montreal (CDN), 01.-04.10.2006, , .

conference poster: Kassel (D); 06.-08.04.2005
Interfacial reaction in the short-fiber reinforced AlSi12CuMgNi piston alloysHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U.,Liu, Y. (2005)
In: 15. Symposium, Verbundwerkstoffe und Werkstoffverbunde, Vol. , Kassel (D), 06.-08.04.2005, , .
conference poster: Kassel (D); 06.-08.04.2005
Mechanical Properties of Short Fiber Reinforced AlSi12CuMgNi Piston Alloys Before and After Dynamic Thermal CyclingHort, N.,Huang, Y.,Dieringa, H.,Kainer, K.U. (2005)
In: 15. Symposium, Verbundwerkstoffe und Werkstoffverbunde, Vol. , Kassel (D), 06.-08.04.2005, , .
conference poster: San Francisco, CA (USA); 13.-17.02.2005
Tensile and compressive creep behavior of Al2O3 (Saffil)-short fiber reinforced magnesium alloy AE42Dieringa, H.,Huang, Y.,Maier, P.,Hort, N.,Kainer, K.U. (2005)
In: TMS 2005, Magnesium Technology, Vol. , San Francisco, CA (USA), 13.-17.02.2005, , .
conference paper: Kassel (D); 06.-08.04.2005
Mechanical Properties of Short Fiber Reinforced AlSi12CuMgNi Piston Alloys Before and After Dynamic Thermal CyclingHort, N.,Huang, Y.,Dieringa, H.,Kainer, K.U. (2005)
In: Verbundwerkstoffe und Werkstoffverbunde, Vol. , Kassel (D), 06.-08.04.2005, , 563-563.
conference paper: Kassel (D); 06.-08.04.2005
Interfacial reaction in the short-fiber reinforced AlSi12CuMgNi piston alloysHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U.,Liu, Y. (2005)
In: Verbundwerkstoffe und Werkstoffverbunde, Vol. , Kassel (D), 06.-08.04.2005, , 33-38.
journal article
Microstructural investigations of interfaces in short fiber reinforced AlSi12CuMgNi compositesHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U.,Liu, Y. (2005)
In: Acta Materialia, Vol. 53, , , 14, 3913-3923.
Zur Publikation beim Verlag
journal article
Microstructural Development in Tension and Compression Creep of Magnesium Alloy AE42Dieringa, H.,Bowles, A.,Hort, N.,Kainer, K.U. (2005)
In: Materials Science Forum, Materials Structure & Micromechanics of Fracture, Vol. 482, , , , 271-274.
Zur Publikation beim Verlag
journal article
Investigations in the Magnesium-Tin systemBowles, A.,Dieringa, H.,Blawert, C.,Hort, N.,Kainer, K.U. (2005)
In: Materials Science Forum, Magnesium – Science, Technology and Applications, Vol. 488-489, , , , 135-138.
Zur Publikation beim Verlag
journal article
Analysis of instantaneous thermal expansion coefficient curve during thermal cycling in short fiber reinforced AlSi12CuMgNi compositesHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2005)
In: Composites Science and Technology, Vol. 65, , , 1, 137-147.
Zur Publikation beim Verlag
conference lecture: Durban (ZA); 27.06.-01.07.2005
Creep and microstructure of hybrid reinforced magnesium alloy AE42Dieringa, H.,Pereira, I.M.,Hort, N.,Kainer, K.U. (2005)
In: Fifteenth International Conference on Composite Materials, ICCM 15, Vol. , Durban (ZA), 27.06.-01.07.2005, , .
conference paper: Durban (ZA); 27.06.-01.07.2005
Creep and microstructure of hybrid reinforced magnesium alloy AE42Dieringa, H.,Pereira, I.M.,Hort, N.,Kainer, K.U. (2005)
In: Fifteenth International Conference on Composite Materials, Extended Abstracts, ICCM 15, Vol. , Durban (ZA), 27.06.-01.07.2005, , 513-514.
conference lecture: Geesthacht (D); 20.04.2005
Faserverstaerkte Magnesiumlegierungen - Einfluss der Grenzflaechen auf die mechanischen EigenschaftenDieringa, H.,Hort, N.,Kainer, K.U. (2005)
In: Grenzflaechen in mehrphasigen Werkstoffen, Workshop der ISH-Initiative Oberflaechentechnik, Vol. , Geesthacht (D), 20.04.2005, , .
journal article
Thermal cycling and creep studies of AM50+Nd magnesium alloy based carbon fiber, SiC particulate and in-situ Mg2Si reinforced habrid compositesThakur, S.,Dieringa, H.,Dhindaw, B.K.,Hort, N.,Kainer, K.U. (2005)
In: Transactions of the Indian Institute of Metals, Vol. 58, , , 4, 653-659.
conference lecture (invited): Moskau (RUS); 29.11.-01.12.2005
Present and Future of Magnesium Alloys in our CivilizationDieringa, H.,Maier, P.,Fechner, D.,Bohlen, J.,Kainer, K.U. (2005)
In: Conference and Exhibition "Magnesium - Broad Horizons", Vol. , Moskau (RUS), 29.11.-01.12.2005, , .
conference lecture: Aachen (D); 09.-11.11.2005
Magnesium - Vom Rohmaterial zum GussteilDieringa, H.,Kainer, K.U. (2005)
In: 2. WING-Konferenz des BMBF, Vol. , Aachen (D), 09.-11.11.2005, , .
conference lecture: Geesthacht (D); 22.-24.11.2005
Warmfeste Mg-WerkstoffeHort, N.,Dieringa, H. (2005)
In: DGM Fortbildungsseminar Magnesium, Vol. , Geesthacht (D), 22.-24.11.2005, , .
conference lecture: Kassel (D); 06.-08.04.2005
Mechanical Properties of Short Fiber Reinforced AlSi12CuMgNi Piston Alloys Before and After Dynamic Thermal CyclingHort, N.,Huang, Y.,Dieringa, H.,Kainer, K.U. (2005)
In: 15. Symposium, Verbundwerkstoffe und Werkstoffverbunde, Vol. , Kassel (D), 06.-08.04.2005, , .
conference paper: Kassel (D); 06.-08.04.2005
Mechanical Properties of Short Fiber Reinforced AlSi12CuMgNi Piston Alloys Before and After Dynamic Thermal CyclingHort, N.,Huang, Y.,Dieringa, H.,Kainer, K.U. (2005)
In: Verbundwerkstoffe und Werkstoffverbunde, 15. Symposium, Vol. , Kassel (D), 06.-08.04.2005, , 563-568.
journal article
Hot tearing of magnesium alloysHort, N.,Dieringa, H.,Kainer, K.U. (2005)
In: Transactions of the Indian Institute of Metals, Vol. 58, , , 4, 703-708.
journal article
Effect of particulate content on the thermal cycling behaviour of the magnesium alloy based hybrid compositesKumar, S.,Dieringa, H.,Kainer, K.U. (2005)
In: Composites / A, Vol. 36, , , 3, 321-325.
Zur Publikation beim Verlag | Zur Publikation
journal article
Tensile and compressive creep behaviour of Al2O3 (Saffil) short fiber reinforced magnesium alloy AE42Dieringa, H.,Huang, Y.,Maier, P.,Hort, N.,Kainer, K.U. (2005)
In: Materials Science and Engineering A, Vol. 410-411, , , , 85-88.
Zur Publikation beim Verlag

conference lecture: Geesthacht (D); 14.-16.06.2004
Partikel, Fasern und Kurzfasern fuer eine Verstaerkung von metallischen WerkstoffenKainer, K.U.,Dieringa, H. (2004)
In: DGM Fortbildungsseminar Metallische Verbundwerkstoffe, Vol. , Geesthacht (D), 14.-16.06.2004, , .
journal article
Analysing hysteresis and residual strains in thermal cycling curves of short fibre reinforced Mg-MMCsKumar, S.,Mondal, A.,Dieringa, H.,Kainer, K.U. (2004)
In: Composites Science and Technology, Vol. 64, , , 9, 1179-1189.
journal article
Magnesium based MMCs reinforced with C-fibersDieringa, H.,Hort, N.,Kainer, K.U. (2004)
In: Advances in Technology of Materials and Materials Processing, Vol. 6, , , 2, 136-141.
conference paper: Long Beach, CA (USA); 16.-20.05.2004
Thermal Cycling and Creep Studies of AM50+Nd Magnesium Alloy Based Carbon Fiber, SiC Particulate and IN-SITU Mg2Si Reinforced Hybrid CompositesThakur, S.K.,Dieringa, H.,Dhindaw, B.K.,Hort, N.,Kainer, K.U. (2004)
In: SAMPE 2004, Conference Proceedings, Vol. , Long Beach, CA (USA), 16.-20.05.2004, , CD.
conference lecture: Long Beach, CA (USA); 16.-20.05.2004
Thermal Cycling and Creep Studies of AM50+Nd Magnesium Alloy Based Carbon Fiber, SiC Particulate and IN-SITU Mg2Si Reinforced Hybrid CompositesThakur, S.K.,Dieringa, H.,Dhindaw, B.K.,Hort, N.,Kainer, K.U. (2004)
In: SAMPE 2004, Vol. , Long Beach, CA (USA), 16.-20.05.2004, , .
conference lecture: Kyoto (J); 13.-15.09.2004
Investigation on thermal fatigue of metal matrix compositesHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2004)
In: 3rd International Conference on Fatigue of Composites, Vol. , Kyoto (J), 13.-15.09.2004, , .
conference lecture: Brno (CZ); 23.-25.06.2004
Microstructural development in tension and compression creep of magnesium alloy AE42Dieringa, H.,Bowles, A.,Hort, N.,Kainer, K.U. (2004)
In: 4th Internationale Conference on Materials Structure & Micromechanics of Fracture, Vol. , Brno (CZ), 23.-25.06.2004, , .
conference lecture (invited): Nagaoka (J); 19.-21.01.2004
Magnesium Based Metal Matrix Composites Reinforced with C-FibersDieringa, H.,Hort, N.,Kainer, K.U. (2004)
In: 4th International Symposium on the 21st Centurry COE Program of Nagaoka University of Technology, Vol. , Nagaoka (J), 19.-21.01.2004, , .
journal article
Micro-Strain Induced by Thermal Cycling in the Short Fiber Reinforced AlSi12CuMgNi Piston Alloys and AE42 Magnesium AlloysHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2004)
In: Advanced Engineering Materials, Vol. 6, , , 11, 883-888.
Zur Publikation beim Verlag
conference paper: Kyoto (J); 13.-15.09.2004
Investigation on thermal fatigue of metal matrix compositesHuang, Y.,Hort, N.,Dieringa, H.,Kainer, K.U. (2004)
In: Fatigue of Composites, ICF 03, Vol. , Kyoto (J), 13.-15.09.2004, , 63-64.
conference lecture: Peking (VCR); 20.-24.09.2004
Investigations in the Magnesium-Tin SystemBowles, A.,Dieringa, H.,Blawert, C.,Hort, N.,Kainer, K.U. (2004)
In: International Conference on Magnesium - Science, Technology and Applications, Vol. , Peking (VCR), 20.-24.09.2004, , .
conference lecture: Stuttgart (D); 10.12.2004
Verhalten von Magnesium-Verbundwerkstoffen bei erhoehten TemperaturenDieringa, H.,Kainer, K.U. (2004)
In: Kolloquium ueber Werkstoffmodellierung, Vol. , Stuttgart (D), 10.12.2004, , .
conference lecture (invited): Bangalore (IND); 17.-20.11.2004
Hot Tearing of MagnesiumKainer, K.U.,Hort, N.,Dieringa, H. (2004)
In: International Conference on Solidification Science and Processing, Vol. , Bangalore (IND), 17.-20.11.2004, , .

conference paper: Pune (IND); 25.-27.09.2003
Thermal cycling behaviour of short fiber reinforced AE42 Magnesium alloyDieringa, H.,Bowles, A,Huang, Y.,Hort, N.,Kainer, K.U. (2003)
In: Materials Show 2003, International Conference on Advances in Materials & Processes for Industrial Applications, Vol. , Pune (IND), 25.-27.09.2003, , 194-199.
book part
Partikel, Fasern und Kurzfasern zur Verstaerkung von metallischen WerkstoffenDieringa, H.,Kainer, K.U. (2003)
In: Metallische Verbundwerkstoffe, Vol. , , , , 66-88.
conference lecture: Ustron-Jaszowiec (PL); 23.-25.04.2003
Compression creep of short fibre reinforced magnesium alloy AE42Dieringa, H.,Hort, N.,Kainer, K.U. (2003)
In: Composites 2003, Theory and Practice, Vol. , Ustron-Jaszowiec (PL), 23.-25.04.2003, , .
conference poster: Wien (A); 02.-04.07.2003
Druckkriechverhalten der kurzfaserverstaerkten Magnesiumlegierung AE42Dieringa, H.,Kainer, K.U. (2003)
In: 14. Symposium der DGM, Vol. , Wien (A), 02.-04.07.2003, , .
conference paper: Wien (A); 02.-04.07.2003
Korrosions- und Verschleisseigenschaften von kurzfaserverstaerkter Magnesiumlegierung QE22Blawert, C.,Morales, E.,Dieringa, H.,Hort, N.,Azeem, M.A.,Kumar, S. (2003)
In: Verbundwerkstoffe, 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Vol. , Wien (A), 02.-04.07.2003, , 159-164.
journal article
Compression creep of short fibre reinforced magnesium alloy AE42Dieringa, H.,Hort, N.,Kainer, K.U. (2003)
In: Kompozyty / Composites, Vol. 3, , , 7, 275-278.
conference lecture: Geesthacht (D); 28.-30.04.2003
Partikel, Fasern und Kurzfasern für die Verstaerkung metallischer WerkstoffeDieringa, H.,Kainer, K.U. (2003)
In: DGM Fortbildung Metallische Verbundwerkstoffe, Vol. , Geesthacht (D), 28.-30.04.2003, , .
journal article
Thermal Cycling of Mg-MMC'sKumar, S.,Ingole, S.,Dieringa, H.,Kainer, K.U. (2003)
In: Materials Science Forum, Vol. 426-432, , , , 2119-2124.
conference lecture: Wien (A); 02.-04.07.2003
Thermische Ausdehnung in kurzfaserverstaerkten AlSi12CuMgNi- und AE42-LegierungenHuang, Y.,Dieringa, H.,Hort, N.,Kainer, K.U. (2003)
In: 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Vol. , Wien (A), 02.-04.07.2003, , .
conference lecture (invited): Puna (IND); 25.-27.09.2003
Local Materials Engineering of Magnesium AlloysHort, N.,Dieringa, H.,Kainer, K.U. (2003)
In: International Conference on Advances in Materials & Processes for Industrial Applications, Vol. , Puna (IND), 25.-27.09.2003, , .
conference lecture (invited): Pune (IND); 25.-27.09.2003
Thermal cycling behaviour of short fiber reinforced AE42 Magnesium alloyDieringa, H.,Bowles, A,Huang, Y.,Hort, N.,Kainer, K.U. (2003)
In: International Conference on Advances in Materials & Processes for Industrial Applications, Vol. , Pune (IND), 25.-27.09.2003, , .
journal article
Analysis of thermal cycling curves of short fibre reinforced Mg-MMCsKumar, S.,Ingole, S.,Dieringa, H.,Kainer, K.U. (2003)
In: Composites Science and Technology, Vol. 63, , , , 1805-1814.
conference paper: Wien (A); 02.-04.07.2003
Thermische Ausdehnung in kurzfaserverstaerkten AlSi12CuMgNi- und AE42-LegierungenHuang, Y.,Dieringa, H.,Hort, N.,Kainer, K.U. (2003)
In: Verbundwerkstoffe, 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Vol. , Wien (A), 02.-04.07.2003, , 115-120.
conference paper: Wien (A); 02.-04.07.2003
Druckkriechverhalten der kurzfaserverstaerkten Magnesiumlegierung AE42Dieringa, H.,Kainer, K.U. (2003)
In: Verbundwerkstoffe, 14. Symposium der DGM, Vol. , Wien (A), 02.-04.07.2003, , 257-261.
conference paper: Puna (IND); 25.-27.09.2003
Local Materials Engineering of Magnesium AlloysHort, N.,Dieringa, H.,Kainer, K.U. (2003)
In: Material Show 2003, International Conference on Advances in Materials & Processes for Industrial Applications, Vol. , Puna (IND), 25.-27.09.2003, , 8-13.

conference paper: Florence (I); 14.-18.06.2002
Behaviour of Saffil-fibre reinforced ZE 41 magnesium hybrid MMC in creep and thermal cyclingDieringa, H.,Hort, N.,Kainer, K.U. (2002)
In: CIMTEC 2002, 3rd Forum on New Materials, Advanced Inorganic Structural Fiber Composites IV, Vol. 5, Florence (I), 14.-18.06.2002, , 227-234.
conference paper: Neu-Ulm (D); 19.-21.09.2001
Gefuege und mechanische Eigenschaften von Magnesium-Matrix-VerbundwerkstoffenDieringa, H.,Morales, E.,Fischer, P.,Kree, V.,Kainer, K.U. (2002)
In: Fortschritte in der Metallographie, 35. DGM-Metallographie-Tagung 2001, Vol. 33, Neu-Ulm (D), 19.-21.09.2001, , 91-96.
conference paper: San Diego, Ca (USA); 01.-06.07.2002
Creep and thermal loading of in situ processed magnesium metal matrix compositesDieringa, H.,Hort, N.,Kainer, K.U.,Wesemann, J. (2002)
In: ICCE 9, 9th International Conference on Composite Materials, Vol. , San Diego, Ca (USA), 01.-06.07.2002, , 169-170.
conference lecture: Stuttgart (D); 17.04.2002
MagnesiumlegierungenHort, N.,Dieringa, H.,Kainer, K.U. (2002)
In: IIR-Workshop: Magnesium - Einsatz im Automobilbau, Vol. , Stuttgart (D), 17.04.2002, , .
conference lecture: Stuttgart (D); 17.04.2002
Magnesium-Matrix-VerbundwerkstoffeHort, N.,Dieringa, H.,Kainer, K.U. (2002)
In: IIR-Workshop: Magnesium - Einsatz im Automobilbau, Vol. , Stuttgart (D), 17.04.2002, , .
conference lecture (invited): Stuttgart (D); 15.-16.04.2002
Verfahrensoptimierte LegierungsentwicklungenKainer, K.U.,Letzig, D.,Hort, N.,Dieringa, H. (2002)
In: Magnesium im Automobil, Vol. , Stuttgart (D), 15.-16.04.2002, , .
conference paper: Florence (I); 14.-18.07.2002
Thermal Cycling of Light Metal Matrix Composites Reinforced with Ceremic Short-FibresHort, N.,Dieringa, H.,Kainer, K.U. (2002)
In: CIMTEC 2002, 3rd Forum on New Materials, Advanced Inorganic Structural Fiber Composites IV, Vol. 5, Florence (I), 14.-18.07.2002, , 218-226.
conference paper: Seattle, WA (USA); 17.-21.02.2002
Effect of thermal cycling on QE 22 + 20 VOL % short fibre MMCSKumar, S.,Dieringa, H.,Kainer, K.U. (2002)
In: Magnesium Technology 2002, Vol. , Seattle, WA (USA), 17.-21.02.2002, , 147-150.

conference paper: Chemnitz (D); 05.-07.09.2001
Verhalten von kurzfasegestaerkten Magnesiumlegierungen bei thermomechanischer BeanspruchungDieringa, H.,Kainer, K.U. (2001)
In: Verbundwerkstoffe und Werkstoffverbunde, DGM-Symposium, Vol. , Chemnitz (D), 05.-07.09.2001, , 182-188.
conference paper: Peking (VRC); 25.-29.06.2001
Microstructure, Creep and Dilatometric Behavior of Reinforced Magnesium Matrix CompositesDieringa, H.,Benzler, T.,Kainer, K.U. (2001)
In: ICCM 13, Vol. , Peking (VRC), 25.-29.06.2001, , CD.
conference paper: Las Vegas, NV (USA); 04.-08.12.2000
Potential of discontinuously reinforced alloys for automotive applicationKainer, K.U.,Benzler, T.,Dieringa, H. (2001)
In: THERMEC 2000, Processing & Manufacturing of Advanced Materials, Vol. , Las Vegas, NV (USA), 04.-08.12.2000, , CD.
conference lecture (invited): GKSS, Geesthacht (D); 23.-25.10.2001
Magnesiummatrix - VerbundwerkstoffeHort, N.,Dieringa, H.,Kainer, K.U. (2001)
In: DGM Fortbildungsseminar: Magnesium - Eigenschaften, Anwendungen, Potentiale, Vol. , GKSS, Geesthacht (D), 23.-25.10.2001, , .
conference lecture: Geesthacht (D); 23.-25.10.2001
Hochtemperatureigenschaften von MagnesiumlegierungenKainer, K.U.,Dieringa, H. (2001)
In: DGM Fortbildungsseminar, Magnesium - Eigenschaften, Anwendungen, Potenziale, Vol. , Geesthacht (D), 23.-25.10.2001, , .
conference lecture: Peking (VRC); 25.-29.06.2001
Microstructure, Creep and Dilatometric Behavior of Reinforced Magnesium Matrix CompositesDieringa, H.,Benzler, T.,Kainer, K.U. (2001)
In: ICCM 13, Vol. , Peking (VRC), 25.-29.06.2001, , .
conference lecture: Chemnitz (D); 05.-07.09.2001
Verhalten von kurzfasegestaerkten Magnesiumlegierungen bei thermomechanischer BeanspruchungDieringa, H.,Kainer, K.U. (2001)
In: Verbundwerkstoffe und Werkstoffverbunde, DGM-Symposium, Vol. , Chemnitz (D), 05.-07.09.2001, , .

conference lecture (invited): Las Vegas, NV (USA); 04.-08.12.2000
Potential of discontinuously reinforced alloys for automotive applicationKainer, K.U.,Benzler, T.,Dieringa, H. (2000)
In: THERMEC 2000, Processing & Manufacturing of Advanced Materials, Vol. , Las Vegas, NV (USA), 04.-08.12.2000, , .
conference paper,conference lecture: Muenchen (D); 26.-29.09.2000
Formation of Mg2Si by Infiltration of C-Fibres-Si-Hybrid-PreformsKainer, K.U.,Dieringa, H.,Schulz, P.,Reiter, J. (2000)
In: Magnesium Alloys and Their Applications, Vol. , Muenchen (D), 26.-29.09.2000, , 240-245.

Entwicklung neuer Magnesiumlegierungen
Kriechbeständigkeit von Magnesiumlegierungen und -kompositen
Entwicklung und Charakterisierung von Leichtmetallmatrix Verbundwerkstoffen
Magnesiumbasierte Nanokomposite
Work Package Koordination "Metal Matrix Nanocomposites" im FP7 EU-Projekt "ExoMet"
Koordination des BMWK-Projektes "OptUm-MagNa - Optimierte Umformbarkeit von Magnesium-Nanokompositen" im Technologietransfer-Programm Leichtbau (TTP)