Publications & Proceedings
2023
ArticleFriction Stir Lap Welding of Inconel 625 and a High Strength SteelBossle, E.P.; Vicharapu, B.; Lemos, G.V.B.; Lessa, C.R.D.L.; Bergmann, L.; dos Santos, J.F.; Clarke, T.G.R.; De, A. (2023)
In: Metals, Vol. 13, 1, 146.- ArticleAnisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacingRath, L.; Kallien, Z.; Roos, A.; dos Santos, J.; Klusemann, B. (2023)
In: The International Journal of Advanced Manufacturing Technology, Vol. 125, 5-6, 2091 - 2102. - ArticleFatigue behaviour of multi-spot joints of 2024-T3 aluminium sheets obtained by refill Friction Stir Spot Welding with polysulfide sealantBernardi, M.; Suhuddin, U.; Fu, B.; Gerber, J.; Bianchi, M.; Ostrovsky, I.; Sievers, B.; Faes, K.; Maawad, E.; Lazzeri, L.; dos Santos, J.; Klusemann, B. (2023)
In: International Journal of Fatigue, 107539. - ArticleStrengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser-Based Powder Bed FusionTaghipour, A.; Mazaheri, Y.; McDavid, J.; Sheikhi, S.; Braun, M.; Shen, J.; Klusemann, B.; Ehlers, S. (2023)
In: Advanced Engineering Materials, Vol. 25, 4, 2201230. - ArticleEffect of Welding Speed on Friction Stir Welds of PM2000 AlloyWang, J.; Fu, B.; Bergmann, L.; Liu, F.; Klusemann, B. (2023)
In: Journal of Materials Engineering and Performance, Vol. 32, 2, 577 - 586.
Link to publisher 2022
- ArticleExperimental and numerical investigation of laser beam-welded Al–Cu–Li joints using micro-mechanical characteristicsExamilioti, T.; Papanikos, P.; Kashaev, N.; Klusemann, B.; Alexopoulos, N. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 19, 2431 - 2446. - ArticleThe effect of prior adhesive bonding on the corrosion behavior of AA2024 FSWed single lap jointsCharalampidou, C.; Braga, D.; Bergmann, L.; Kourkoulis, S.; da Silva, L.; Infante, V.; dos Santos, J.; Moreira, P.; Alexopoulos, N. (2022)
In: Mechanics of Materials, Vol. 164, 104122. - ArticleCoupled Modeling Approach for Laser Shock Peening of AA2198-T3: From Plasma and Shock Wave Simulation to Residual Stress PredictionPozdnyakov, V.; Keller, S.; Kashaev, N.; Klusemann, B.; Oberrath, J. (2022)
In: Metals, Vol. 12, 1, 107. - ArticleChanges in processing characteristics and microstructural evolution during friction extrusion of aluminumHalak, R.; Rath, L.; Suhuddin, U.; dos Santos, J.; Klusemann, B. (2022)
In: International Journal of Material Forming, Vol. 15, 3, 24. - ArticleCombined experimental-numerical analysis of the temperature evolution and distribution during friction surfacingKallien, Z.; Klusemann, B. (2022)
In: Surface and Coatings Technology, Vol. 437, 128350. - ArticleTailoring powder strengths for enhanced quality of cold sprayed Al6061 depositsHuang, C.; List, A.; Shen, J.; Fu, B.; Yin, S.; Chen, T.; Klusemann, B.; Gärtner, F.; Klassen, T. (2022)
In: Materials & Design, Vol. 215, 110494. - ArticleMitigating the susceptibility to intergranular corrosion of alloy 625 by friction-stir weldingLemos, G.V.B.; Farina, A.B.; Piaggio, H.; Bergmann, L.; Ferreira, J.Z.; dos Santos, J.F.; Vander Voort, G.; Reguly, A. (2022)
In: Scientific Reports, Vol. 12, 1, 3482. - ArticleEffect of laser peen forming process parameters on bending and surface quality of Ti-6Al-4V sheetsSala, S.; Keller, S.; Chupakhin, S.; Pöltl, D.; Klusemann, B.; Kashaev, N. (2022)
In: Journal of Materials Processing Technology, Vol. 305, 117578. - ArticleFundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturingSoujon, M.; Kallien, Z.; Roos, A.; Zeller-Plumhoff, B.; Klusemann, B. (2022)
In: Materials & Design, Vol. 219, 110786. - ArticleMicroscale Damage Evolution and Failure Behavior of Metal–Composite Friction Spot Joints: Modelling and Experimental AnalysesAndré, N.M.; Alessio, R.P.; dos Santos, J.F.; Amancio-Filho, S.T. (2022)
In: Metals, Vol. 12, 12, 2080. - ArticleA multi-scaled process study of dissimilar friction stir welding of Eurofer RAFM steel to PM2000 ODS alloyWang, J.; Fu, B.; Shen, J.; Bergmann, L.; Lu, X.; dos Santos, J.; Klusemann, B. (2022)
In: Journal of Materials Processing Technology, Vol. 307, 117679. - ArticleInfluence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental–numerical studySandmann, P.; Keller, S.; Kashaev, N.; Ghouse, S.; Hooper, P.; Klusemann, B.; Davies, C. (2022)
In: Additive Manufacturing, Vol. 60, 103204. - ArticleComparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequencesSu, Y.; Li, W.; Shen, J.; Bergmann, L.; dos Santos, J.F.; Klusemann, B.; Vairis, A. (2022)
In: Materials Science and Engineering: A, Vol. 859, 144227. - ArticleDataset from healthy and defective spot welds in refill friction stir spot welding using acoustic emissionDahmene, F.; Yaacoubi, S.; El Mountassir, M.; Porot, G.; Masmoudi, M.; Nennig, P.; Suhuddin, U.; dos Santos, J. (2022)
In: Data in Brief, Vol. 45, 108750. - ArticleEffects of semi-solid structure on interface formation of dissimilar aluminum to galvanized steel welds produced by load-controlled Refill Friction Stir Spot WeldingFerrari, V.R.; Coury, F.G.; Suhuddin, U.F.H.; Alcântara, N.G.; dos Santos, J.F.; Ohashi, R.; Fujimoto, M.; Koga, G.Y. (2022)
In: Journal of Manufacturing Processes, Vol. 84, 298 - 315. - ArticleEffect of rotational speed and double-sided welding in friction stir–welded dissimilar joints of aluminum alloy and steelBergmann, L.; Batistão, B.; de Alcantara, N.; Gargarella, P.; Klusemann, B. (2022)
In: Welding in the World, Vol. 66, 9, 1747 - 1756. - ArticleModeling of temperature- and strain-driven intermetallic compound evolution in an Al–Mg system via a multiphase-field approach with application to refill friction stir spot weldingRaza, S.; Mittnacht, T.; Diyoke, G.; Schneider, D.; Nestler, B.; Klusemann, B. (2022)
In: Journal of the Mechanics and Physics of Solids, Vol. 169, 105059. - ArticleTool wear mechanisms and effects on refill friction stir spot welding of AA2198-T8 sheetsde Castro, C.; Shen, J.; Plaine, A.; Suhuddin, U.; de Alcantara, N.; dos Santos, J.; Klusemann, B. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 20, 857 - 866. - ArticleHeterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloyEscobar, J.; Gwalni, B.; Olszta, M.; Silverstein, J.; Ajantiwalay, T.; Overman, N.; Fu, W.; Li, Y.; Bergmann, L.; Maawad, E.; Klusemann, B.; dos Santos, J.; Devaraj, A. (2022)
In: Journal of Alloys and Compounds, Vol. 928, 167007. - ArticleNumerical investigation of dissimilar friction stir welding of AISI 304L and 410S stainless steelsCruz da Silva, Y.; Caminha Andrade, T.; Vieira de Oliveira Júnior, F.; dos Santos, J.; Marcondes, F.; Miranda, H.; Silva, C. (2022)
In: The International Journal of Advanced Manufacturing Technology, Vol. 121, 3-4, 2721 - 2733.
Link to publication2021
- ArticleInfluence of LDH conversion coatings on the adhesion and corrosion protection of friction spot-joined AA2024-T3/CF-PPSBouali, A.; André, N.; Silva Campos, M.; Serdechnova, M.; Dos Santos, J.; Amancio-Filho, S.; Zheludkevich, M. (2021)
In: Journal of Materials Processing Technology, Vol. 67, 197 - 210. - ArticleAssessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy JointsWen, Q.; Li, W.; Patel, V.; Bergmann, L.; Klusemann, B.; dos Santos, J. (2021)
In: Acta Metallurgica Sinica (English Letters), Vol. 34, 125 - 134. - ArticleInvestigation of friction stir welding process applied to ASTM 572 steel plate cladded with Inconel®625Landell, R.; de Lima Lessa, C.; Bergmann, L.; dos Santos, J.; Kwietniewski, C.; Klusemann, B. (2021)
In: Welding in the World, Vol. 65, 393 - 403. - ArticleRecent progress on control strategies for inherent issues in friction stir weldingMeng, X.; Huang, Y.; Cao, J.; Shen, J.; Dos Santos, J. (2021)
In: Progress in Materials Science, Vol. 115, 100706. - ArticleModeling precipitation kinetics for multi-phase and multi-component systems using particle size distributions via a moving grid techniqueHerrnring, J.; Sundman, B.; Staron, P.; Klusemann, B. (2021)
In: Acta Materialia, Vol. 215, 117053. - ArticleApplication of stress intensity factor superposition in residual stress fields considering crack closureKeller, S.; Klusemann, B. (2021)
In: Engineering Fracture Mechanics, Vol. 243, 107415. - ArticleExperimental and numerical thermo-mechanical analysis of wire-based laser metal deposition of Al-Mg alloysBock, F.; Herrnring, J.; Froend, M.; Enz, J.; Kashaev, N.; Klusemann, B. (2021)
In: Journal of Manufacturing Processes, Vol. 64, 982 - 995. - ArticleProbing underlying mechanisms for pcBN tool decay during friction stir welding of nickel-based alloysVicharapu, B.; Lemos, G.; Bergmann, L.; dos Santos, J.; De, A.; Clarke, T. (2021)
In: Tecnologia em Metalurgia, Materiais e Mineracao, Vol. 18, e2455. - ArticleTailoring of residual stresses by specific use of defined prestress during laser shock peeningSchwab, K.; Keller, S.; Kashaev, N.; Klusemann, B. (2021)
In: Journal of Materials Processing Technology, Vol. 295, 117154. - ArticlePhase-field modelling for fatigue crack growth under laser shock peening-induced residual stressesSeiler, M.; Keller, S.; Kashaev, N.; Klusemann, B.; Kästner, M. (2021)
In: Archive of Applied Mechanics, Vol. 91, 8, 3709 - 3723. - ArticleHybrid Modelling by Machine Learning Corrections of Analytical Model Predictions towards High-Fidelity Simulation SolutionsBock, F.; Keller, S.; Huber, N.; Klusemann, B. (2021)
In: Materials, Vol. 14, 8, 1883. - ArticleFriction-based processes for hybrid multi-material joiningLambiase, F.; Balle, F.; Blaga, L.; Liu, F.; Amancio-Filho, S. (2021)
In: Composite Structures, Vol. 266, 113828. - ArticleExperimental-numerical study of laser-shock-peening-induced retardation of fatigue crack propagation in Ti-17 titanium alloySun, R.; Keller, S.; Zhu, Y.; Guo, W.; Kashaev, N.; Klusemann, B. (2021)
In: International Journal of Fatigue, Vol. 145, 106081. - ArticleCompression Behaviour of Wire + Arc Additive Manufactured StructuresAbbaszadeh, M.; Ventzke, V.; Neto, L.; Riekehr, S.; Martina, F.; Kashaev, N.; Hönnige, J.; Williams, S.; Klusemann, B. (2021)
In: Metals, Vol. 11, 6, 877. - ArticleInfluence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing depositsEhrich, J.; Roos, A.; Klusemann, B.; Hanke, S. (2021)
In: Materials Science and Engineering: A, Vol. 819, 141407. - ArticleMicrostructure, mechanical and functional properties of refill friction stir spot welds on multilayered aluminum foils for battery applicationGera, D.; Fu, B.; Suhuddin, U.; Plaine, A.; Alcantara, N.; dos Santos, J.; Klusemann, B. (2021)
In: Journal of Materials Research and Technology : JMRT, Vol. 13, 2272 - 2286. - ArticleExperimental and Numerical Analysis of Refill Friction Stir Spot Welding of Thin AA7075-T6 SheetsJanga, V.S.R.; Awang, M.; Yamin, M.F.; Suhuddin, U.F.H.; Klusemann, B.; Dos Santos, J.F. (2021)
In: Materials, Vol. 14, 23, 7485. - ArticleEffect of the Gap Width in AZ31 Magnesium Alloy Joints Obtained by Friction Stir WeldingChiuzuli, F.; Batistão, B.; Bergmann, L.; Alcantara, N.; dos Santos, J.; Klusemann, B.; Gargarella, P. (2021)
In: Journal of Materials Research and Technology : JMRT, Vol. 15, 5297 - 5306. - ArticleProcess Transferability of Friction Riveting of AA2024-T351/Polyetherimide (PEI) Joints Using Hand-Driven, Low-Cost Drilling EquipmentFeier, A.; Becheru, A.; Brîndușoiu, M.; Blaga, L. (2021)
In: Processes, Vol. 9, 8, 1376. - ArticleMultimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloyEscobar, J.; Gwalani, B.; Olszta, M.; Silverstein, J.; Overman, N.; Bergmann, L.; dos Santos, J.F.; Staron, P.; Maawad, E.; Klusemann, B.; Mathaudhu, S.; Devaraj, A. (2021)
In: Journal of Alloys and Compounds, Vol. 887, 161351. - ArticleHydrothermal aging of friction riveted thermoplastic composite joints for aircraft applicationsBorba, N.; dos Santos, J.; Amancio-Filho, S. (2021)
In: Composite Structures, Vol. 255, 112871. - ArticleComparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-jointsSu, Y.; Li, W.; Shen, J.; Fu, B.; dos Santos, J.; Klusemann, B.; Vairis, A. (2021)
In: Materials Science and Engineering: A, Vol. 823, 141698. - ArticleRevealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steelFu, B.; Shen, J.; Suhuddin, U.; Pereira, A.; Maawad, E.; dos Santos, J.; Klusemann, B.; Rethmeier, M. (2021)
In: Materials & Design, Vol. 209, 109997. - ArticleImproved mechanical properties of cast Mg alloy welds via texture weakening by differential rotation refill friction stir spot weldingFu, B.; Shen, J.; Suhuddin, U.; Chen, T.; dos Santos, J.; Klusemann, B.; Rethmeier, M. (2021)
In: Scripta Materialia, Vol. 203, 114113. - ArticleEffect of filler wire and post weld heat treatment on the mechanical properties of laser beam-welded AA2198Examilioti, T.; Kashaev, N.; Ventzke, V.; Klusemann, B.; Alexopoulos, N. (2021)
In: Materials Characterization, Vol. 178, 111257.
2020
- ArticleCombined experimental–numerical study on residual stresses induced by a single impact as elementary process of mechanical peeningSandmann, P.; Nielsen, M.; Keller, S.; Maawad, E.; Staron, P.; Klusemann, B. (2020)
In: Strain : the journal of the British Society for Strain Measurement , Vol. 56, 4, e12338. - ArticleNumerical residual strength prediction of stationary shoulder friction stir welding structuresScheider, I.; Barbini, A.; dos Santos, J. (2020)
In: Engineering Fracture Mechanics, Vol. 230, 107010. - ArticleThe Influence of Laser Shock Peening on Fatigue Properties of AA2024-T3 Alloy with a Fastener HoleSikhamov, R.; Fomin, F.; Klusemann, B.; Kashaev, N. (2020)
In: Metals, Vol. 10, 4, 495. - ArticleInvestigation of internal defects and premature fracture of dissimilar refill friction stir spot welds of AA5754 and AA6061Ferreira, A.; Campanelli, L.; Suhuddin, U.; Alcantara, N.; dos Santos, J. (2020)
In: The International Journal of Advanced Manufacturing Technology, Vol. 106, 3523 - 3531. - ArticleDurability of Metal-Composite Friction Spot Joints under Environmental Conditions Goushegir, S.; Scharnagl, N.; dos Santos, J.; Amancio-Filho, S. (2020)
In: Materials, Vol. 13, 5, 1144. - ArticleMechanical integrity of friction-riveted joints for aircraft applicationsBorba, N.; Kötter, B.; Fiedler, B.; dos Santos, J.F.; Amancio-Filho, S.T. (2020)
In: Composite Structures, Vol. 232, 111542. - ArticleMicrostructure by design: An approach of grain refinement and isotropy improvement in multi-layer wire-based laser metal depositionFroend, M.; Ventzke, V.; Dorn, F.; Kashaev, N.; Klusemann, B.; Enz, J.; (2020)
In: Materials Science and Engineering A, Vol. 772, 138635. - ArticleOn the influence of laser beam welding parameters for autogenous AA2198 welded jointsExamilioti, T.; Kashaev, N.; Enz, J.; Klusemann, B.; Alexopoulos, N. (2020)
In: The International Journal of Advanced Manufacturing Technology, Vol. 110, 2079 - 2092. - ArticleLow-velocity impact response of friction riveted joints for aircraft application Borba, N.Z.; Körbelin, J.; Fiedler, B.; dos Santos, J.F.; Amancio-Filho, S.T. (2020)
In: Materials and Design, Vol. 186, 108369. - ArticleDiffusion-driven microstructure evolution in OpenCalphadHerrnring, J.; Sundman, B.; Klusemann, B. (2020)
In: Computational Materials Science, Vol. 175, 109236. - ArticleOn the application of laser shock peening for retardation of surface fatigue cracks in laser beam‐welded AA6056Kashaev, N.; Ushmaev, D.; Ventzke, V.; Klusemann, B.; Fomin, F. (2020)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, 7, 1500 - 1513. - ArticleExperimentally established correlation of friction surfacing process temperature and deposit geometryKallien, Z.; Rath, L.; Roos, A.; Klusemann, B. (2020)
In: Surface and Coatings Technology, Vol. 397, 126040. - ArticleMultiphase-field modeling of temperature-driven intermetallic compound evolution in an Al–Mg system for application to solid-state joining processesRaza, S.; Klusemann, B. (2020)
In: Modelling and Simulation in Materials Science Engineering, Vol. 28, 8, 085003. - ArticleImpact resistance of metal-composite hybrid joints produced by frictional heatAndré, N.; dos Santos, J.; Amancio-Filho, S. (2020)
In: Composite Structures, Vol. 233, 111754. - ArticleRefill friction stir spot welding of AA6082-T6 alloy: Hook defect formation and its influence on the mechanical properties and fracture behaviorHessel Silva, B.; Zepon, G.; Bolfarini, C.; dos Santos, J. (2020)
In: Materials Science and Engineering: A, Vol. 773, 138724. - ArticleNumerical investigation of the influence of FSW parameters on the heat and mass transfer of austenitic stainless steelsda Silva, Y.; Oliveira Júnior, F.; dos Santos, J.; Marcondes, F.; Silva, C. (2020)
In: Welding in the World, Vol. 64, 4, 2019 - 2032. - ArticleProcess-Related Changes in Polyetherimide Joined by Friction-Based Injection Clinching Joining (F-ICJ)Abibe, A.; Sônego, M.; Canto, L.; dos Santos, J.; Amancio-Filho, S. (2020)
In: Materials, Vol. 13, 5, 1027. - ArticleMicrostructure Features and Mechanical Properties of Double-Sided Friction Stir Welded Joints of AA2050-T84 Thick PlatesSantini, F.; Plaine, A.; Afonso, C.; Bergmann, L.; Alcantara, N.; dos Santos, J.; Miyazaki, M. (2020)
In: Materials Research, Vol. 23, 6, e20200309. - ArticleSingle-phase friction riveting: metallic rivet deformation, temperature evolution, and joint mechanical performancePina Cipriano, G.; Ahiya, A.; dos Santos, J.; Vilaça, P.; Amancio-Filho, S. (2020)
In: Welding in the World, Vol. 64, 47 - 58. - ArticleAn investigation of the ultrasonic joining process parameters effect on the mechanical properties of metal-composite hybrid jointsFeistauer, E.; dos Santos, J.; Amanci-Filho, S. (2020)
In: Welding in the World, Vol. 64, 1481 - 1495. - ArticleMechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding : Optimierung der mechanischen Leistungfähigkeit für artgleich produzierte AA 7075-T6-Bleche durch Rühr-Reib-Punkt-SchweißenYamin, M.; Awang, M.; Suhuddin, U.; Sallih, N.; Klusemann, B.; Dos Santos, J. (2020)
In: Materials Science and Engineering Technology - Materialwissenschaft und Werkstofftechnik, Vol. 51, 6, 830 - 835. - ArticleOn the stability of the passive Ti-6Al-4V film of friction stir welds with stainless steel: Effect of not native metal speciesSilva, D.; Campanelli, L.; Bergmann, L.; dos santos, J.; Hammer, P.; Della Rovere, C.; Aquino, J. (2020)
In: Electrochimica Acta, Vol. 358, 136900. - ArticlePrediction of the mechanical and failure behavior of metal-composite hybrid joints using cohesive surfacesAlessio, R.; Andre, N.; Goushegir, S.; dos Santos, J.; Mazzaferro, J.; T. Amancio-Filho, S. (2020)
In: Materials Today Communications, Vol. 24, 101205. - ArticleCharacterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steelBatistao, B.; Bergmann, L.; Gargarela, P.; Alcantara, N.; dos Santos, J.; Klusemann, B. (2020)
In: Journal of Materials Research and Technology, Vol. 9, 6, 15132 - 15142.
2019
- ArticleFundamentals of Force-Controlled Friction Riveting: Part II - Joint Global Mechanical Performance and Energy EfficiencyCipriano, G.P.; Blaga, L.A.; dos Santos, J.F.; Vilaca, P.; Amancio-Filho, S.T. (2019)
In: Materials, Vol. 11, 12, 2489. - ArticleA study of the parameters influencing mechanical properties and the fatigue performance of refill friction stir spot welded AlMgSc alloyLage, S.; Campanelli, L.; Guerra, A.; Shen, J.; dos Santos, J.; da Silva, P.; Bolfarini, C. (2019)
In: The International Journal of Advanced Manufacturing Technology, Vol. 100, 101 - 110. - ArticleEvaluation of Joint Formation and Mechanical Performance of the AA7075-T6/CFRP Spot Joints Produced by Frictional HeatManente Andre, N.; dos Santos, J.F.; Amancio-Filho, S.T. (2019)
In: Materials, Vol. 12, 6, 891. - ArticleMicrostructure and Mechanical Performance of Additively Manufactured Aluminum 2024-T3/Acrylonitrile Butadiene Styrene Hybrid Joints Using an AddJoining TechniqueFalck, R.; dos Santos, J.F.; Amancio-Filho, S.T. (2019)
In: Materials, Vol. 12, 6, 864. - ArticleThe Influence of Clamping Pressure on Joint Formation and Mechanical Performance of Ti6Al4V/CF-PEEK Friction-Riveted JointsZocoller Borba, N.; dos Santos, J.F.; Amancio-Filho, S.T. (2019)
In: Materials, Vol. 12, 5, 745. - ArticleApplication of design of experiments for laser shock peening process optimizationChupakhin, S.; Klusemann, B.; Huber, N.; Kashaev, N. (2019)
In: The International Journal of Advanced Manufacturing Technology, Vol. 102, 5 - 8, 1567 - 1581. - ArticleA review on direct assembly of through‐the‐thickness reinforced metal–polymer composite hybrid structuresFeistauer, E.; dos Santos, J.; Amancio-Filho, S. (2019)
In: Polymer Engineering & Science, Vol. 59, 4, 661 - 674. - ArticleIntergranular corrosion evaluation of friction stir welded AISI 410S ferritic stainless steelQueiroz Caetano, G.de; Carvalho Silva, C.; Motta, M.F.; Miranda, H.C.; Farias, J.P.; Bergmann, L.A.; dos Santos, J.F. (2019)
In: Journal of Materials Science and Technology, Vol. 8, 2, 1878 - 1887. - ArticleFatigue performance of hybrid overlap friction stir welding and adhesive bonding of an Al‐Mg‐Cu alloyBraga, D.F.O.; Maciel, R.; Bergmann, L.; da Silva, L.F.M.; Infante, V.; dos Santos, J.F.; Moreira, P.M.G.P. (2019)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 42, 6, 1262 - 1270. - ArticleExperimentally validated multi-step simulation strategy to predict the fatigue crack propagation rate in residual stress fields after laser shock peeningKeller, S.; Horstmann, M.; Kashaev, N.; Klusemann, B. (2019)
In: International Journal of Fatigue, Vol. 124, 265 - 276. - ArticleThe scaled boundary finite element method for computational homogenization of heterogeneous mediaTalebi, H.; Silani, M.; Klusemann, B. (2019)
In: International Journal for Numerical Methods in Engineering, Vol. 118, 1, 1 - 17. - ArticleComputational modeling of amorphous polymers: A Lagrangian logarithmic strain space formulation of a glass–rubber constitutive modelRaza, S.H.; Soyarslan, C.; Bargmann, S.; Klusemann, B. (2019)
In: Computer Methods in Applied Mechanics and Engineering, Vol. 344, 887 - 909. - ArticleEffect of friction spot welding parameters on the joint formation and mechanical properties of Al to CuCardillo, M.E.B.; Shen, J.; de Alcantara, N.G.; Afonso, C.R.M.; dos Santos, J.F. (2019)
In: Welding in the World, Vol. 63, 1, 33 - 41. - ArticleEffect of welding speed on friction stir welds of GL E36 shipbuilding steelCosta Pereira da Cunha, P.H.; Braga, Lemos, G,V.; Bergmann, L.; Reguly, A.; dos Santos, J.F.; Marinho, R.R.; Piza Paes, M.T. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 1, 1041 - 1051. - ArticleThe effect of grain boundary precipitates on stress corrosion cracking in a bobbin tool friction stir welded Al-Cu-Li alloyEntringer, J.; Meisnar, M.; Reimann, M.; Blawert, C.; Zheludkevich, M.; dos Santos, J.F. (2019)
In: Materials Letters: X, Vol. 2, 100014. - ArticleInfluence of Cu/Li ratio on the microstructure evolution of bobbin-tool friction stir welded Al–Cu–Li alloysEntringer, J.; Reimann, M.; Norman, A.; dos Santos, J.F. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 2, 2031 - 2040. - ArticleA Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials MechanicsBock, F.E.; Aydin, R.C.; Cyron, C.J.; Huber, N.; Kalidindi, S.R.; Klusemann, B. (2019)
In: Frontiers in Materials, Vol. 6, 110. - ArticleTwo-step simulation approach for laser shock peeningPozdnyakov, V.; Keller, S.; Kashaev, N.; Klusemann, B.; Oberrath, J. (2019)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 19, 1, e201900497. - ArticleThermomechanical Degradation of Polyetherimide (PEI) by Friction-Based Joining and the Effects on Quasi-Static Mechanical Strength of Hybrid JointsSonego, M.; Abibe, A.; Canevarolo, S.; Bettini, S.; dos Santos, J.; Canto, L.; Amancio-Filho, S. (2019)
In: International Polymer Processing, Vol. 34, 1, 100 - 110. - ArticleApplication of response surface methodology for optimization of hybrid friction diffusion bonding of tube-to-tube-sheet connections in coil-wound heat exchangersAlba, D.; Roos, A.; Wimmer, G.; Gonzalez, A.; Hanke, S.; Dos Santos, J. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 2, 1701 - 1711. - ArticleThermal analysis of wire-based direct energy deposition of Al-Mg using different laser irradiancesFroend, M.; Ventzke, V.; Kashaev, N.; Klusemann, B.; Enz, J. (2019)
In: Additive Manufacturing, Vol. 29, 100800. - ArticleComparison of Friction Surfacing Process and Coating Characteristics of Ti-6Al-4V and Ti Grade 1Vale, N.; Fitseva, V.; Urtiga Filho, S.; dos santos, J.; Hanke, S. (2019)
In: JOM: The Journal of the Minerals, Metals and Materials Society, Vol. 71, 4339 - 4348. - ArticleCorrosion behavior of metal–composite hybrid joints: Influence of precipitation state and bonding zonesAndre, N.M.; Bouali, A.; Maawad, E.; Staron, P.; dos Santos, J.F.; Zheludkevich, M.L.; Amancio-Filho, S.T. (2019)
In: Corrosion Science, Vol. 158, 108075. - ArticleEffects of Friction Surfacing on the Characteristics of Consumable Rods of Ti-6Al-4Vdo Vale, N.; Fitseva, V.; Hanke, S.; Filho, S.; dos Santos, J. (2019)
In: Materials Research : Revista Brasileira de Materiais , Vol. 22, e20180888. - ArticleResidual stress characterization in friction stir welds of alloy 625Lemos, G.V.B.; Farina, A.B.; Menezes Nunes, R.; Pereira da Cunha, P.H.C.; Bergmann, L.; dos Santos, J.F.; Reguly, A. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 3, 2528 - 2537. - ArticleNumerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured StructuresAbbaszadeh, M.; Hönnige, J.R.; Martina, F.; Neto, L.; Kashaev, N.; Colegrove, P.; Williams, S.; Klusemann, B. (2019)
In: Journal of Materials Engineering and Performance, Vol. 28, 8, 4931 - 4942. - ArticleEffect of Laser Peening Process Parameters and Sequences on Residual Stress ProfilesKallien, Z.; Keller, S.; Ventzke, V.; Kashaev, N.; Klusemann, B. (2019)
In: Metals, Vol. 9, 6, 655.
2018
- ArticleResidual stress and microstructural features of friction-stir-welded GL E36 shipbuilding steelLemos, G.V.B.; Cunha, P.H.C.P.; Nunes, R.M.; Bergmann, L.; dos Santos, J.F.; Clarke, T. (2018)
In: Materials Science and Technology, Vol. 34, 1, 95 - 103. - ArticleExperimental and numerical investigation of residual stresses in laser shock peened AA2198Keller, S.; Chupakhin, S.; Staron, P.; Maawad, E.; Kashaev, N.; Klusemann, B. (2018)
In: Journal of Materials Processing Technology, Vol. 255, 294 - 307. - ArticleImproving weld formability by a novel dual-rotation bobbin tool friction stir weldingWang, F.F.; Li, W.Y.; Shen, J.; Wen, Q.; dos Santos, J.F. (2018)
In: Journal of Materials Science and Technology, Vol. 34, 1, 135 - 139. - ArticleEstudo da Sensitizacao em Juntas Soldadas de Inconel® 625 Produzidas Atraves da Soldagem por Friccao e Mistura Mecanica - Sensitization Study in Friction Stir Welds of Inconel®625Martinazzi, D.; Lemos, G.V.B.; Cardoso, H.R.P.; dos Santos, R.E.; Ferreira, J.Z.; Bergmann, L.; dos Santos, J.F.; Reguly, A. (2018)
In: Periodico Tche Quimica, Vol. 15, 29, 53 - 60. - ArticleTexture Development and Material Flow Behavior During Refill Friction Stir Spot Welding of AlMgScShen, J.; Lage, S.B.M.; Suhuddin, U.F.H.; Bolfarini, C.; dos Santos, J.F. (2018)
In: Metallurgical and Materials Transactions A, Vol. 49, 1, 241 - 254. - ArticleAddJoining: a novel additive manufacturing approach for layered metal-polymer hybrid structuresFalck, R.; Goushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2018)
In: Materials Letters, Vol. 217, 211 - 214. - ArticleInfluence of Alloys Position, Rolling and Welding Directions on Properties of AA2024/AA7050 Dissimilar Butt Weld Obtained by Friction Stir WeldingBarbini, A.; Carstensen, J.; dos Santos, J.F. (2018)
In: Metals, Vol. 8, 4, 202. - ArticleDirect-Friction Riveting of polymer composite laminates for aircraft applicationsBorba, N.Z.; Blaga, L.; dos Santos, J.F.; Amancio-Filho, S.T. (2018)
In: Materials Letters, Vol. 215, 31 - 34. - ArticleMicrostructure Evolution and Mechanical Properties of Keyhole Repair Welds in AA 2219-T851 using Refill Friction Stir Spot WeldingReimann, M.; Goebel, J.; dos Santos, J.F. (2018)
In: Journal of Materials Engineering and Performance, Vol. 27, 10, 5220 - 5226. - ArticleGeneration of 3D representative volume elements for heterogeneous materials: A reviewBargmann, S.; Klusemann, B.; Markmann, J.; Schnabel, J.E.; Schneider, K.; Soyarslan, C.; Wilmers, J. (2018)
In: Progress in Materials Science, Vol. 96, 322 - 384. - ArticleEffect of reverse material flow on the microstructure and performance of friction stir welded T-joints of an Al-Mg alloyFeistauer, E.E.; Bergmann, L.A.; dos Santos, J.F. (2018)
In: Materials Science and Engineering A, Vol. 731, 454 - 464. - ArticleComposite surface pre-treatments: improvement on adhesion mechanisms and mechanical performance of metal-composite friction spot joints with additional film interlayerManente Andre, N.; Goushegir, S.M.; Scharnagl, N.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2018)
In: The Journal of Adhesion , Vol. 94, 9, 723 - 742. - ArticleA method for the in-situ study of solid-state joining techniques using synchrotron radiation - observation of phase transformations in Ti-6Al-4V after friction surfacingHanke, S.; Staron, P.; Fischer, T.; Fitseva, V.; dos Santos, J.F. (2018)
In: Surface and Coatings Technology, Vol. 335, 355 - 367. - ArticleProcess development for wire-based laser metal deposition of 5087 aluminium alloy by using fibre laserFroend, M.; Riekehr, S.; Kashaev, N.; Klusemann, B.; Enz, J. (2018)
In: Journal of Manufacturing Processes, Vol. 34 A, 721 - 732. - ArticleInfluence of Cu/Li Ratio on the Welding Forces and Mechanical Properties of Two Bobbin Tool Friction Stir Welded Al-Cu-Li AlloysGoebel, J.; Reimann, M.; dos Santos, J.F. (2018)
In: Journal of Materials Engineering and Performance, Vol. 27, 10, 5212 - 5219. - ArticleFundamentals of Force-Controlled Friction Riveting: Part I - Joint Formation and Heat DevelopmentCipriano, G.P.; Blaga, L.A.; dos Santos, J.F.; Vilaca, P.; Amancio-Filho, S.T. (2018)
In: Materials, Vol. 11, 11, 2294. - ArticleUnderstanding precipitate evolution during friction stir welding of Al-Zn-Mg-Cu alloy through in-situ measurement coupled with simulationdos Santos, J.F.; Staron, P.; Fischer, T.; Robson, J.D.; Kostka, A.; Colegrove, P.; Wang, H.; Hilgert, J.; Bergmann, L.; Huetsch, L.L.; Huber, N.; Schreyer, A. (2018)
In: Acta Materialia, Vol. 148, 163 - 172. - ArticleInfluence of a non-rotating shoulder on heat generation, microstructure and mechanical properties of dissimilar AA2024/AA7050 FSW jointsBarbini, A.; Carstensen, J.; dos Santos, J.F. (2018)
In: Journal of Materials Science and Technology, Vol. 34, 1, 119 - 127. - ArticleSurface modification methods for fatigue properties improvement of laser welded Ti64 butt jointsFomin, F.; Klusemann, B.; Kashaev, N. (2018)
In: Procedia Structural Integrity , Vol. 13, 273 - 278. - ArticlePrecipitation Kinetics of AA6082: An Experimental and Numerical Investigation Herrnring, J.; Kashaev, N.; Klusemann, B. (2018)
In: Materials Science Forum, THERMEC 2018, Vol. 941, 1411 - 1417. - ArticleExperimental Investigation of Temperature Distribution during Wire-Based Laser Metal Deposition of the Al-Mg Alloy 5087 Froend, M.; Bock, F.; Ventzke, V.; Riekehr, S.; Kashaev, N.; Klusemann, B.; Enz, J. (2018)
In: Materials Science Forum, THERMEC 2018, Vol. 941, 988 - 994. - ArticleMicrostructure and microhardness of wire-based laser metal deposited AA5087 using an Ytterbium fibre laserFroend, M.; Ventzke, V.; Riekehr, S.; Kashaev, N.; Klusemann, B.; Enz, J. (2018)
In: Materials Characterization, Vol. 143, 59 - 67. - ArticleMultiscale process simulation of residual stress fields of laser beam welded precipitation hardened AA6082Herrnring, J.; Staron, P.; Kashaev, N.; Klusemann, B. (2018)
In: Materialia, Vol. 3, 243 - 255. - ArticleInfluence of rotation speed and axial force on the friction stir welding of AISI 410S ferritic stainless steelde Queiroz Caetano, G.; Silva, C.C.; Motta, M.F.; Miranda, H.C.; Farias, J.P.; Bergmann, L.A.; dos Santos, J.F. (2018)
In: Journal of Materials Processing Technology, Vol. 262, 430 - 436. - ArticleMicrostructure and hardness evolution of laser metal deposited AA5087 wall-structuresFroend, M.; Ventzke, V.; Riekehr, S.; Kashaev, N.; Klusemann, B.; Enz, J. (2018)
In: Procedia CIRP, Vol. 74, 131 - 135.
2017
- ArticleNumerical simulation of thermally induced residual stresses in friction stir welding of aluminum alloy 2024-T3 at different welding speedsBachmann, M.; Carstensen, J.; Bergmann, L.; dos Santos, J.F.; Wu, C.S.; Rethmeier, M. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 91, 1-4, 1443 - 1452. - ArticleInfluence of rotational speed on process characteristics in friction surfacing of Ti-6Al-4V Fitseva, V.; Hanke, S.; dos Santos, J.F. (2017)
In: Materials and Manufacturing Processes, Vol. 32, 5, 557 - 563. - ArticleProcess Optimization and Microstructure Analysis in Refill Friction Stir Spot Welding of 3-mm-thick Al-Mg-Si Aluminum AlloySantana, L.M.; Suhuddin, U.F.H.; Oelscher, M.H.; Strohaecker, T.R.; dos Santos, J.F. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 92, 9-12, 4213 - 4220. - ArticleSemi-stationary shoulder bobbin tool friction stir welding of AA2198-T851 Goebel, J.; Reimann, M.; Norman, A.; dos Santos, J.F. (2017)
In: Journal of Materials Processing Technology, Vol. 245, 37 - 45. - ArticleProgress in friction stir welding of Ni alloysLemos, G.V.B.; Hanke, S.; dos Santos, J.F.; Bergmann, L.; Reguly, A.; Strohaecker, T.R. (2017)
In: Science and Technology of Welding and Joining, Vol. 22, 8, 643 - 657. - ArticleOn the Process-Related Rivet Microstructural Evolution, Material Flow and Mechanical Properties of Ti-6Al-4V/GFRP Friction-Riveted JointsZocoller Borba, N.; Afonso, C.R.M.; Blaga, L.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2017)
In: Materials, Vol. 10, 2, 184. - ArticleDegradation mechanisms of pcBN tool material during Friction Stir Welding of Ni-base alloy 625Hanke, S.; Lemos, G.V.B.; Bergmann, L.; Martinazzi, D.; dos Santos, J.F.; Strohaecker, T.R. (2017)
In: Wear , Vol. A346-A377, 403 - 408. - ArticleComparative study of severe plastic deformation at elevated temperatures of two aluminium alloys during friction surfacingHanke, S.; dos Santos, J.F. (2017)
In: Journal of Materials Processing Technology, Vol. 247, 257 - 267. - ArticleRefilling termination hole in AA 2198–T851 by refill friction stir spot welding Reimann, M.; Goebel, J.; Gartner, T.M.; dos Santos, J.F. (2017)
In: Journal of Materials Processing Technology, Vol. 245, 157 - 166. - ArticleFully periodic RVEs for technological relevant composites: not worth the effort!Schneider, K.; Klusemann, B.; Bargmann, S. (2017)
In: Journal of Mechanics of Materials and Structures, Vol. 12, 4, 471 - 484. - ArticleFiber laser welding of dissimilar titanium (Ti-6Al-4V/cp-Ti) T-joints and their laser forming process for aircraft applicationFroend, M.; Fomin, F.; Riekehr, S.; Alvarez, P.; Zubiri, F.; Bauer, S.; Klusemann, B.; Kashaev, N. (2017)
In: Optics and Laser Technology, Vol. 96, 123 - 131. - ArticleMicrostructure evolution in refill friction stir spot weld of a dissimilar Al–Mg alloy to Zn-coated steelSuhuddin, U.F.H.; Fischer, V.; Kostka, A.; dos Santos, J.F. (2017)
In: Science and Technology of Welding and Joining, Vol. 22, 8, 658 - 665. - ArticleResidual Stress Evaluation in Friction Stir Welds of Inconel 625 - Avaliacao das Tensoes Residuais em Juntas Soldadas de Inconel 625 Obtidas Atraves da Soldagem por Friccao e Mistura Mecanica Lemos, G.V.B.; Nunes, R.M.; Doll, P.; Bergmann, L.; Strohaecker, T.R.; dos Santos, J.F. (2017)
In: Soldagem & Inspecao, Vol. 22, 1, 35 - 45. - ArticleArtificial neural network for correction of effects of plasticity in equibiaxial residual stress profiles measured by hole drillingChupakhin, S.; Kashaev, N.; Klusemann, B.; Huber, N. (2017)
In: The Journal of Strain Analysis for Engineering Design, Vol. 52, 3, 137 - 151. - ArticleThe weld interface for friction spot welded 5052 aluminium alloyTier, M.D.; Rosendo, T.S.; Mazzaferro, J.A.; Mazzaferro, C.P.; dos Santos, J.F.; Strohaecker, T.R. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 90, 1-4, 267 - 276. - ArticleA new method of hybrid friction stir welding assisted by friction surfacing for joining dissimilar Ti/Al alloyHuang, Y.; Lv, Z.; Wan, L.; Shen, J.; dos Santos, J.F. (2017)
In: Materials Letters, Vol. 207, 172 - 175. - ArticleMicrostructure and mechanical behavior of friction spot welded AA6181-T4/Ti6Al4V dissimilar jointsPlaine, A.H.; Suhuddin, U.F.H.; Alcantara, N.G.; dos Santos, J.F. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 92, 9-12, 3703 - 3714. - ArticleInfluence of Rotational Speed in the Friction Surfacing of Titanium Grade 1 on Ti-6Al-4VLopes do Vale, N.; Fitseva, V.; Hanke, S.; Urtiga Filho, S.L.; dos Santos, J.F. (2017)
In: Materials Research : Revista Brasileira de Materiais , Vol. 20, 2, 830 - 835. - ArticleFriction riveting (‘FricRiveting’) of 6056 T6 aluminium alloy and polyamide 6: influence of rotational speed on the formation of the anchoring zone and on mechanical performanceProenca, B.C.; Blaga, L.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2017)
In: Welding International, Vol. 31, 7, 509 - 518. - ArticleMicrostructure and mechanical properties of keyhole repair welds in AA 7075-T651 using refill friction stir spot weldingReimann, M.; Goebel, J.; dos Santos, J.F. (2017)
In: Materials and Design, Vol. 132, 283 - 294. - ArticleHydrogen embrittlement under cathodic protection of friction stir welded UNS S32760 super duplex stainless steelPohl Meinhardt, C.; Scheid, A.; dos Santos, J.F.; Bergmann, L.A.; Borges, Favaro, M.; Fortis Kwietniewski, C.E. (2017)
In: Materials Science and Engineering A, Vol. 706, 48 - 56. - ArticleInfluence of aluminum surface pre-treatments on the bonding mechanisms and mechanical performance of metal-composite single-lap jointsGoushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2017)
In: Welding in the world, Vol. 61, 6, 1099 - 1115.
2016
- ArticleXPS analysis of the interface between AA2024-T3 / CF-PPS friction spot jointsGoushegir, S.M.; Scharnagl, N.; dos Santos, J.F.; Amancio-Filho, S.T. (2016)
In: Surface and Interface Analysis :SIA, Vol. 48, 8, 706 - 711. - ArticleImprovement of friction spot welding (FSpW) to join polyamide 6 and polyamide 66/carbon fibre laminateGoncalves, J.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2016)
In: Welding International, Vol. 30, 4, 247 - 254. - ArticleFatigue behavior of friction spot welds in lap shear specimens of AA5754 and Ti6Al4V alloysPlaine, A.H.; Suhuddin, U.F.H.; Alcantara, N.G.; dos Santos, J.F. (2016)
In: International Journal of Fatigue, Vol. 91, 149 - 157. - ArticleInterface formation and properties of friction spot welded joints of AA5754 and Ti6Al4V alloysPlaine, A.H.; Suhuddin, U.F.H.; Afonso, C.R.M.; Alcantara, N.G.; dos Santos, J.F. (2016)
In: Materials and Design, Vol. 93, 224 - 231. - ArticleProcess parameter optimization in friction spot welding of AA5754 and Ti6Al4V dissimilar joints using response surface methodologyPlaine, A.H.; Gonzalez, A.R.; Suhuddin, U.F.H.; dos Santos, J.F.; Alcantara, N.G. (2016)
In: The International Journal of Advanced Manufacturing Technology, Vol. 85, 5, 1575 - 1583. - ArticleFailure and fracture micro-mechanisms in metal-composite single lap joints produced by welding-based joining techniquesGoushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2016)
In: Composites / A, Vol. 81, 121 - 128. - ArticleFatigue life assessment of friction spot welded 7050-T76 aluminium alloy using Weibull distributionEffertz, P.S.; Infante, V.; Quintino, L.; Suhuddin, U.; Hanke, S.; dos Santos, J.F. (2016)
In: International Journal of Fatigue, Vol. 87, 381 - 390. - ArticleFriction Spot Joining of aluminum alloy 2024-T3 and carbon-fiber-reinforced poly(phenylene sulfide) laminate with additional PPS film interlayer: Microstructure, mechanical strength and failure mechanismsAndre, N.M.; Goushegir, S.M.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2016)
In: Composites / B, Vol. 94, 197 - 208. - ArticleUltrasonic joining: A novel direct-assembly technique for metal-composite hybrid structuresFeistauer, E.E.; Guimaraes, R.P.M.; Ebel, T.; dos Santos, J.F.; Amancio-Filho, S.T. (2016)
In: Materials Letters, Vol. 170, 1 - 4. - ArticleInfluence of the Interlayer Film Thickness on the Mechanical Performance of AA2024-T3/CF-PPS Hybrid Joints Produced by Friction Spot Joining - Influencia da Espessura do Filme Polimerico Intermediario na Resistencia Mecanica de Juntas Hibridas de Alumínio 2024-T3 e CF-PPS Produzidas por Uniao Pontual por FriccaoAndre, N.M.; Goushegir, S.M.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2016)
In: Soldagem & Inspecao, Vol. 21, 1, 2 - 15. - ArticleInfluence of Rotational Speed on the Microstructure and Mechanical Performance of Friction-Riveted Thermosetting Composite Joints - Influencia da Velocidade de Rotacao do Rebite na Microestrutura e no Desempenho Mecanico de Juntas de Composito Termofixo Rebitadas por FriccaoZocoller Borba, N.; Blaga, L.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2016)
In: Soldagem & Inspecao, Vol. 21, 1, 30 - 43. - ArticleKeyhole closure using friction spot welding in aluminum alloy 6061–T6Reimann, M.; Gartner, T.; Suhuddin, U.; Goebel, J.; dos Santos, J.F. (2016)
In: Journal of Materials Processing Technology, Vol. 237, 12 - 18. - ArticleOn the feasibility of a friction-based staking joining method for polymer–metal hybrid structuresAbibe, A.B.; Sonego, M.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2016)
In: Materials and Design, Vol. 92, 632 - 642. - ArticleAutomatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion compositesSchneider, K.; Klusemann, B.; Bargmann, S. (2016)
In: Advances in Engineering Software, Vol. 99, 177 - 188. - ArticleModeling of microstructural pattern formation in crystal plasticityKlusemann, B. (2016)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 16, 1, 361 - 362. - ArticleMaterial-flow behavior during friction-stir welding of 6082-T6 aluminum alloyHuang, Y.; Wang, Y.; Wan, L.; Liu, H.; Shen, J.; dos Santos, J.F.; Zhou, L.; Feng, J. (2016)
In: The International Journal of Advanced Manufacturing Technology, Vol. 87, 1, 1115 - 1123. - ArticleThe role of process temperature and rotational speed in the microstructure evolution of Ti-6Al-4V friction surfacing coatingsFitseva, V.; Hanke, S.; dos Santos, J.F.; Stemmer, P.; Gleising, B. (2016)
In: Materials and Design, Vol. 110, 112 - 123. - ArticleFriction Stir Welding of Shipbuilding Steel with PrimerAzevedo, J.; Quintino, L.; Infante, V.; Miranda, R.M.; dos Santos, J.F. (2016)
In: Soldagem & Inspecao, Vol. 21, 1, 16 - 29. - ArticleFourth-order strain-gradient phase mixture model for nanocrystalline fcc materialsKlusemann, B.; Bargmann, S.; Estrin, Y. (2016)
In: Modelling and Simulation in Materials Science Engineering, Vol. 24, 8, 085016. - ArticlePerformance of friction stir welded tailor welded blanks in AA5059 and AA6082 alloys for marine applicationsFeistauer, E.; Bergmann, L.; dos Santos, J.F. (2016)
In: Key Engineering Materials, Aluminium Constructions: Sustainability, Durability and Structural Advantages, Vol. 710, 91 - 96. - ArticleThe effect of yield surface curvature change by cross hardening on forming limit diagrams of sheetsSoyarslan, C.; Klusemann, B.; Bargmann, S. (2016)
In: International Journal of Mechanical Sciences, Vol. 117, 53 - 66. - ArticleGlobal and local mechanical properties and microstructure of Bobbin tool friction-stir-welded Al–Li alloyWang, F.F.; Li, W.Y.; Shen, J.; Zhang, Z.H.; Li, J.L.; dos Santos, J.F. (2016)
In: Science and Technology of Welding and Joining, Vol. 21, 6, 479 - 483. - ArticleFatigue Crack Growth Behaviour in Friction Stir Welded Aluminium–Lithium Alloy Subjected to Biaxial LoadsRichter-Trummer, V.; Zhang, X.; Irving, P.E.; Pacchione, M.; Beltrao, M.; dos Santos, J.F. (2016)
In: Experimental Techniques, Vol. 40, 3, 921 - 935.
2015
- ArticleInfluence of external cooling configuration on friction surfacing of AA6082 T6 over AA2024 T351Krohn, H.; Hanke, S.; Beyer, M.; dos Santos, J.F. (2015)
In: Manufacturing Letters, Vol. 5, 17 - 20. - ArticleFriction spot joining of aluminum AA6181-T4 and carbon fiber-reinforced poly(phenylene sulfide): Effects of process parameters on the microstructure and mechanical strengthEsteves, J.V.; Goushegir, S.M.; dos Santos, J.F.; Canto, L.B.; Hage, E.Jr.; Amancio-Filho, S.T. (2015)
In: Materials and Design, Vol. 66 B, 437 - 445. - ArticleThe plastic yield and flow behavior in metallic glassesThamburaja, P.; Klusemann, B.; Adibi, S.; Bargmann, S. (2015)
In: Applied Physics Letters, Vol. 106, 5, 051903. - ArticleEffect of tool rotational speed on the microstructure and mechanical properties of bobbin tool friction stir welding of Al-Li alloyWang, F.F.; Li, W.Y.; Shen, J.J.; Hu, S.Y.; Li, J.L.; dos Santos, J.F.; Huber, N. (2015)
In: Materials and Design, Vol. 86, 933 - 940. - ArticleInfluence of process parameters on mechanical performance and bonding area of AA2024/carbon-fiber-reinforced poly(phenylene sulfide) friction spot single lap jointsGoushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2015)
In: Materials and Design, Vol. 83, 431 - 442. - ArticleCrystallographic Texture in Bobbin Tool Friction-Stir-Welded AluminumShen, J.; Wang, F.; Suhuddin, U.F.H.; Hu, S.; Li, W.; dos Santos, J.F. (2015)
In: Metallurgical and Materials Transactions A, Vol. 46, 7, 2809 - 2813. - ArticleCharacterization of the Microstructure Evolution in IF-Steel and AA6016 during Plane-Strain Tension and Simple ShearGerstein, G.; Klusemann, B.; Bargmann, S.; Schaper, M. (2015)
In: Materials, Vol. 8, 1, 285 - 301. - ArticleFriction Spot Welding of Similar AA5754 to AA5754 Aluminum Alloys and Dissimilar AA5754 Aluminum to AZ31 Magnesium AlloysSuhuddin, U.; Piccolo, D.; Fischer, V.; dos Santos, J.F. (2015)
In: Advanced Materials Research, Advanced Materials Research and Production, Vol. 1112, 485 - 488. - ArticleThe optimization of friction spot welding process parameters in AA6181-T4 and Ti6Al4V dissimilar jointsPlaine, A.H.; Gonzalez, A.R.; Suhuddin, U.F.H.; dos Santos, J.F.; Alcantara, N.G. (2015)
In: Materials and Design, Vol. 83, 36 - 41. - ArticleMicrostructure and mechanical performance of metal-composite hybrid joints produced by FricRivetingAltmeyer, J.; Suhuddin, U.F.H.; dos Santos, J.F.; Amancio-Filho, S.T. (2015)
In: Composites / B, Vol. 81, 130 - 140. - ArticleSliding wear behaviour of a Cr-base alloy after microstructure alterations induced by friction surfacingHanke, S.; Fischer, A.; dos Santos, J.F. (2015)
In: Wear , Vol. 338-339, 332 - 338. - ArticleFriction spot welding of carbon fiber-reinforced polyamide 66 laminateGoncalves, J.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2015)
In: Materials Letters, Vol. 159, 509 - 509. - ArticleA directional modification of the Levkovitch–Svendsen cross-hardening model based on the stress deviatorSoyarslan, C.; Klusemann, B.; Bargmann, S. (2015)
In: Mechanics of Materials, Vol. 86, 21 - 30. - ArticleMicrostructure of AISI 410S Ferritic Stainless Steel and AISI 304L Austenitic Stainless Steel Dissimilar Weld Joined by FSW Process - Microestrutura de uma Solda Dissimilar entre o Aço Inoxidável Ferrítico AISI 410S e o Aço Inoxidável Austenítico AISI 304L Soldado pelo Processo FSWAndrade, T.C.; Silva, C.C.; Miranda, H.C.de; Motta, M.F.; Farias, J.P.; Bergman, L.A.; dos Santos, J.F. (2015)
In: Soldagem & Inspecao, Vol. 20, 4, 467 - 478. - ArticleFriction surfacing of Ti–6Al–4V: Process characteristics and deposition behaviour at various rotational speedsFitseva, V.; Krohn, H.; Hanke, S.; dos Santos, J.F. (2015)
In: Surface and Coatings Technology, Vol. 278, 56 - 63. - ArticleFriction Riveting of Aluminum Alloy 6056 T6 and Polyamide 6: Role of the Rotation Speed on the Formation of the Anchoring Zone and Mechanical Performance - Rebitagem por Friccao (“FricRiveting”) de Liga de Alumínio 6056 T6 e Poliamida 6: Influencia da Velocidade de Rotacao na Formacao da Zona de Ancoragem e no Desempenho MecanicoProenca, B.C.; Blaga, L.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2015)
In: Soldagem & Inspecao, Vol. 20, 4, 489 - 500.
2014
- ArticleFricRiveting of aluminum 2024-T351 and polycarbonate: Temperature evolution, microstructure and mechanical performanceRodrigues, C.F.; Blaga, L.A.; dos Santos, J.F.; Canto, L.B.; Hage, E. Jr.; Amancio-Filho, S.T. (2014)
In: Journal of Materials Processing Technology, Vol. 214, 10, 2029 - 2039. - ArticleIncreased Room Temperature Formability of Mg AZ31 by High Speed Friction Stir ProcessingHuetsch, L.L.; Huetsch, J.; Herzberg, K.; dos Santos, J.F.; Huber, N. (2014)
In: Materials and Design, Vol. 54, 980 - 988. - ArticleComputational modelling of submicron-sized metallic glassesBargmann, S.; Xiao, T.; Klusemann, B. (2014)
In: Philosophical Magazine, Vol. 94, 1, 1 - 19. - ArticleFriction surfacing - A reviewGandra, J.; Krohn, H.; Miranda, R.M.; Vilaca, P.; Quintino, L.; dos Santos, J.F. (2014)
In: Journal of Materials Processing Technology, Vol. 214, 5, 1062 - 1093. - ArticleHybrid Friction Diffusion Bonding of Aluminium Tube-to-Tube-Sheet Connections in Coil-Wound Heat ExchangersDethlefs, A.; Roos, A.; dos Santos, J.F.; Wimmer, G. (2014)
In: Materials and Design, Vol. 60, 7 - 12. - ArticleEffect of the friction riveting process parameters on the joint formation and performance of Ti alloy/short-fibre reinforced polyether ether ketone jointsAltmeyer, J.; dos Santos, J.F.; Amancio-Filho, S.T. (2014)
In: Materials and Design, Vol. 60, 164 - 176. - ArticleMechanical behaviour of dissimilar friction stir welded tailor welded blanks in Al–Mg alloys for Marine applicationsFeistauer, E.E.; Bergmann, L.A.; Barreto, L.S.; dos Santos, J.F. (2014)
In: Materials and Design, 323 - 332. - ArticleEutectic structures in friction spot welding joint of aluminum alloy to copperShen, J.; Suhuddin, U.F.H.; Barbosa, M.E.B.; dos Santos, J.F. (2014)
In: Applied Physics Letters, Vol. 104, 19, 191901. - ArticleMaterials by design: An experimental and computational investigation on the microanatomy arrangement of porous metallic glassesSarac, B.; Klusemann, B.; Xiao, T.; Bargmann, S. (2014)
In: Acta Materialia, Vol. 77, 411 - 422. - ArticleMicrostructure and mechanical properties of friction spot welds of dissimilar AA5754 Al and AZ31 Mg alloysSuhuddin, U.; Fischer, V.; Kroeff, F.; dos Santos, J.F. (2014)
In: Materials Science and Engineering A, Vol. 590, 384 - 389. - ArticleEffects of tool rotational and welding speed on microstructure and mechanical properties of bobbin-tool friction-stir welded Mg AZ31Li, W.Y.; Fu, T.; Huetsch, L.; Hilgert, J.; Wang, F.F.; dos Santos, J.F.; Huber, N. (2014)
In: Materials and Design, Vol. 64, 714 - 720. - ArticleFeasibility study of friction spot welding of dissimilar single-lap joint between poly(methyl methacrylate) and poly(methyl methacrylate)-SiO2 nanocompositeJunior, W.S.; Handge, U.A.; dos Santos, J.F.; Abetz, V.; Amancio-Filho, S.T. (2014)
In: Materials and Design, Vol. 64, 246 - 250. - ArticleImprovement of the Friction Spot Welding (FSpW) to join Polyamide 6 and Polyamide 66/Carbon Fiber Laminate - Aperfeicoamento da Tecnica de Soldagem Pontual por Friccao (FSpW) para Uniao de Poliamida 6 e Laminado de Poliamida 66 com Fibra de CarbonoGoncalves, J.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2014)
In: Soldagem & Inspecao, Vol. 19, 1, 19 - 27. - ArticleInherent and induced anisotropic finite visco-plasticity with applications to the forming of DC06 sheetsBehrouzi, A.; Soyarslan, C.; Klusemann, B.; Bargmann, S. (2014)
In: International Journal of Mechanical Sciences, Vol. 89, 101 - 111. - ArticleA computational study of a model of single-crystal strain-gradient viscoplasticity with an interactive hardening relationBargmann, S.; Reddy, B.D.; Klusemann, B. (2014)
In: International Journal of Solids and Structures, Vol. 51, 15-16, 2754 - 2764. - ArticleNon-local modeling of size effects in amorphous metalsKlusemann, B.; Xiao, T.; Bargmann, S. (2014)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 14, 1, 529 - 530. - ArticleFriction Spot Joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: Microstructure and mechanical performanceGoushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2014)
In: Materials and Design, Vol. 54, 196 - 206. - ArticleFriction spot welding of PMMA with PMMA/silica and PMMA/silica-g-PMMA nanocomposites functionalized via ATRPJunior, W.S.; Emmler, T.; Abetz, C.; Handge, U.A.; dos Santos, J.F.; Amancio-Filho, S.T.; Abetz, V. (2014)
In: Polymer, Vol. 55, 20, 5146 - 5159. - ArticleMicrostructure and interface characterization of dissimilar friction stir welded lap joints between Ti–6Al–4V and AISI 304Campo, K.N.; Campanelli, L.C.; Bergmann, L.; dos Santos, J.F.; Bolfarini, C. (2014)
In: Materials and Design, Vol. 56, 139 - 145.
2013
- ArticleModeling and simulation of size effects in metallic glasses with a non-local continuum mechanics theoryKlusemann, B.; Bargmann, S. (2013)
In: Journal of the Mechanical Behavior of Materials, Vol. 22, 1-2, 51 - 66. - ArticleFormation of Intermetallic Compounds in Dissimilar Friction Spot Weld of Al to Mg AlloysSuhuddin, U.; Fischer, V.; dos Santos, J.F. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, 731 - 735. - ArticleThe thermal cycle during the dissimilar friction spot welding of aluminum and magnesium alloySuhuddin, U.F.H.; Fischer, V.; dos Santos, J.F. (2013)
In: Scripta Materialia, Vol. 68, 1, 87 - 90. - ArticleAnalysis and comparison of two finite element algorithms for dislocation density based crystal plasticityKlusemann, B.; Svendsen, B.; Bargmann, S. (2013)
In: GAMM-Mitteilungen, Vol. 36, 2, 219 - 238. - ArticleAsymmetric mechanical properties and tensile behaviour prediction of aluminium alloy 5083 friction stir welding jointsRao, D.; Huber, K.; Heerens, J.; dos Santos, J.F.; Huber, N. (2013)
In: Materials Science and Engineering A, Vol. 565, 44 - 50. - ArticleMechanical and failure behaviour of hybrid polymer–metal staked jointsAbibe, A.B.; Amancio-Filho, S.T.; dos Santos, J.F.; Hage, E.jr. (2013)
In: Materials and Design, Vol. 46, 338 - 347. - ArticleMetallurgy and Mechanical Performance of AZ31 Magnesium Alloy Friction Spot WeldsCampanelli, L.C.; Suhuddin, U.F.H.; Antonialli, A.I.S.; dos Santos, J.F.; Alcantara, N.G.; Bolfarini, C. (2013)
In: Journal of Materials Processing Technology, Vol. 213, 4, 515 - 521. - ArticleHybrid modelling of 7449-T7 aluminium alloy friction stir welded jointsWang, H.; Colegrove, P.A.; dos Santos, J.F. (2013)
In: Science and Technology of Welding and Joining, Vol. 18, 2, 147 - 153. - ArticleFriction riveting (FricRiveting) – An innovative technology for joining hybrid polymer-metal and composite-metal structures / Nituirea prin frecare (FricRiveting) – O tehnologie inovativă pentru îmbinarea structurilor hibride polimer-metal și compozit-metalAmancio-Filho, S.T.; Blaga, L.; dos Santos, J.F.; Bancila, R. (2013)
In: Sudura : Romanian Welding Society´s Review, Vol. 23, 1, 14 - 16. - ArticleNumerical investigation of the tool contact condition during friction stir welding of aerospace aluminium alloyWang, H.; Colegrove, P.A.; dos Santos, J.F. (2013)
In: Computational Materials Science, Vol. 71, 101 - 108. - ArticleLap Shear Test of a Magnesium Friction Spot Joint: Numeric ModelingCampanelli, L.C.; Antonialli, A.I.S.; de.Alcantara, N.G.; Bolfarini, C.; Suhuddin, U.F.H.; dos Santos, J.F. (2013)
In: Tecnologia em Metalurgia, Materiais e Mineracao, Vol. 10, 2, 97 - 102. - ArticleCavitation erosion of Cr60Ni40 coatings generated by friction surfacingHanke, S.; Beyer, M.; Silvonen, A.; dos Santos, J.F.; Fischer, A. (2013)
In: Wear , Vol. 301, 1-2, 415 - 423. - ArticleThe influence of refill FSSW parameters on the microstructure and shear strength of 5042 aluminium weldsTier, M.D; Rosendo, T.S; dos Santos, J.F.; Huber, N.; Mazzaferro, J.A.; Mazzaferro, C.P.; Strohaecker, T.R. (2013)
In: Journal of Materials Processing Technology, Vol. 213, 6, 997 - 1005. - ArticleMethodology for prediction of distortion of workpieces manufactured by high speed machining based on an accurate through-the-thickness residual stress determinationRichter-Trummer, V.; Koch, D.; Witte, A.; dos Santos, J.F.; de Castro, P.M.S.T. (2013)
In: The International Journal of Advanced Manufacturing Technology, Vol. 68, 9-12, 2271 - 2281. - ArticleFriction stir welding development of aluminium alloys for structural connectionsGabor, R.; dos Santos, J.F. (2013)
In: Proceedings of the Romanian Academy : Series A, Vol. 14, 1, 64 - 71. - ArticleFriction stir welding of structural steel S235 and S355Szabo, R.; Bergmann, L.; dos Santos, J.F. (2013)
In: Welding and Material Testing, Vol. 22, 4, 3 - 7. - ArticleFriction Riveting of glass-fibre-reinforced polyetherimide composite and titanium grade 2 hybrid jointsBlaga, L.; Bancila, R.; dos Santos, J.F.; Amancio-Filho, S.T. (2013)
In: Materials and Design, Vol. 50, 825 - 829.
2012
- ArticleFeasibility study of the Friction Spot Welding (FSpW) process in thermoplastics - Estudo de viabilidade da soldagem de termoplásticos por "Friction Spot Welding" (FSpW)de Oliveira, P.H.F.; Amancio Filho, S.T; dos Santos, J.F.; Hage, E.jr. (2012)
In: Soldagem & Inspecao, Vol. 17, 2, 96 - 103. - ArticlePreliminary Investigation on Friction Spot Welding of AZ31 Magnesium AlloyCampanelli, L.C.; Suhuddin, U.F.H.; dos Santos, J.F.; Alcantara, N.G. (2012)
In: Materials Science Forum, THERMEC 2011, Vol. 706-709, 3016 - 3021. - ArticleTemperature and Texture Development during High Speed Friction Stir Processing of Magnesium AZ31Huetsch, L.L.; Hilgert, J.; Herzberg, K.; dos Santos, J.; Huber, N. (2012)
In: Advanced Engineering Materials, Vol. 14, 9, 762 - 771. - ArticleShear layer modelling for bobbin tool friction stir weldingHilgert, J.; dos Santos, J.F.; Huber, N. (2012)
In: Science and Technology of Welding and Joining, Vol. 17, 6, 454 - 459. - ArticleFriction-stir dissimilar welding of aluminium alloy to high strength steels: Mechanical properties and their relation to microstructureCoelho, R.S.; Kostka, A.; dos Santos, J.F.; Kaysser-Pyzalla, A. (2012)
In: Materials Science and Engineering A, Vol. 556, 175 - 183. - ArticleMicrostructural Evolution During Friction Surfacing of Dissimilar Aluminum AlloysSuhuddin, U.; Mironow, S.; Krohn, H.; Beyer, M.; dos Santos, J.F. (2012)
In: Metallurgical and Materials Transactions A, Vol. 43, 13, 5224 - 5231. - ArticleInfluence of the FSW clamping force on the final distortion and residual stress fieldRichter-Trummer, V.; Suzano, E.; Beltrao, M.; Roos, A.; dos Santos, J.F.; de Castro, P.M.S.T. (2012)
In: Materials Science and Engineering A, Vol. 538, 81 - 88. - ArticleParameters optimization for friction spot welding of AZ31 magnesium alloy by Taguchi method - Otimizacao dos parametros de soldagem por friccao por ponto da liga de magnesio AZ31 pelo metodo de TaguchiCampanelli, L.C.; Suhuddin, U.F.H.; dos Santos, J.F.Alcantara, N.G. (2012)
In: Soldagem & Inspecao, Vol. 17, 1, 26 - 31. - ArticleDevelopment of computational models to predict the mechanical behavior of Friction Riveting jointsBorges, M.F.; Amancio-Filho, S.T.; dos Santos, J.F.; Strohaecker, T.R.; Mezzaferro, J.A.E. (2012)
In: Computational Materials Science, Vol. 54, 7 - 15.