Publications
2023
- journal articleCompressive creep behavior and microstructural evolution of sand-cast and peak-aged Mg–12Gd–0.4Zr alloy at 250 °CShi, H., Huang, Y., Yang, L., Liu, C., Dieringa, H., Lu, C., Xiao, L., Willumeit-Römer, R., Hort, N. (2023)
In: Materials Science and Engineering: A, Vol. 882, 145422. 
journal articleImproving the ductility and toughness of nano-TiC/AZ61 composite by optimizing bimodal grain microstructure via extrusion speedFan, L., Zhou, M., Lao, W., Zhang, Y., Dieringa, H., Zeng, Y., Huang, Y., Quan, G. (2023)
In: Journal of Magnesium and Alloys,- journal articleMechanism and prediction of aging time related thermal conductivity evolution of Mg-Zn alloysChen, H., Xie, T., Liu, Q., Huang, Y., Liu, B., Luo, Q., Li, Q. (2023)
In: Journal of Alloys and Compounds, Vol. 930, 167392. - journal articleEffects of dynamic flow rates on degradation deposition behavior of Mg scaffoldJia, G., Zhou, M., Huang, Y., Chen, C., Jin, L., Wu, Q., Weng, J., Yu, F., Xiong, A., Yuan, G., Feyerabend, F., Zeng, H. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, 6, 2054-2060. - journal articleInvestigations on the tensile deformation of pure Mg and Mg–15Gd alloy by in-situ X-ray synchrotron radiation and visco-plastic self-consistent modelingXu, Y., Huang, Y., Wang, Y., Gan, W., Wang, S., Maawad, E., Schell, N., Hort, N. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, 2, 607-613. - journal articleMicrostructure and mechanical properties of Mg-3Sn-1Ca reinforced with AlN nano-particlesWang, S., Huang, Y., Yang, L., Zeng, Y., Hu, Y., Zhang, X., Sun, Q., Shi, S., Meng, G., Hort, N. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, 1, 259-269. - journal articleAchieving high strength and ductility in a heterogeneous bimodal grain structured TiC/AZ61 magnesium nanocomposites via powder metallurgyFan, L., Zhou, M., Zhang, Y., Dieringa, H., Qian, X., Zeng, Y., Lu, X., Huang, Y., Quan, G. (2023)
In: Materials Science and Engineering: A, Vol. 867, 144344. - conference lecture: Cetraro (ITA)Rotary barrel finishing for magnesium sample preparationDühring, N., Petersen, N., Helmholz, H., Wiese, B., Hort, N. (2023)
In: 15th International Symposium on Biodegradable Metals, Cetraro (ITA), - journal articleDesigning Mg alloys with high strength and ductility by reducing the strength difference between the basal and non-basal slipsZhou, S., Liu, T., Tang, A., Huang, Y., Peng, P., Zhang, J., Hort, N., Willumeit-Römer, R., Pan, F. (2023)
In: Materials & Design, Vol. 225, 111476. - journal articleRole of solute in stress development of nanocrystalline films during heating: An in situ synchrotron X-ray diffraction studyWang, J., Li, X., Maawad, E., Han, L., Huang, Y., Liu, Y., Wang, Z. (2023)
In: Journal of Materials Science & Technology, Vol. 144, 188-197. - conference paper:Barrel Finishing of Magnesium AlloysPetersen, N., Wiese, B., Hort, N. (2023)
In: Magnesium Technology 2023. TMS 2023. The Minerals, Metals & Materials Series, 101-106. - conference lecture: San Diego (USA)Barrel Finishing of Magnesium AlloysPetersen, N., Wiese, B., Hort, N. (2023)
In: TMS 2023 Annual Meeting & Exhibition, San Diego (USA), - journal articleEffect of potential difference between nano-Al2O3 whisker and Mg matrix on the dispersion of Mg compositesQian, X., Yang, H., Hu, C., Zeng, Y., Huang, Y., Shang, X., Wan, Y., Jiang, B., Feng, Q. (2023)
In: International Journal of Minerals, Metallurgy and Materials, Vol. 30, 1, 104-111. - journal articleStrength and Ductility Loss of Magnesium-Gadolinium due to Corrosion in Physiological Environment: Experiments and ModelingSteglich, D., Besson, J., Reinke, I., Helmholz, H., Luczak, M., Garamus, V.M., Wiese, B., Höche, D., Cyron, C.J., Willumeit-Römer, R. (2023)
In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 144, 105939. - conference lecture: San Diego (USA)Effect of Deformation Speed on Stress Corrosion and Fracture Toughness of Extruded Mg10Dy and Mg10Dy1Nd Using C-Ring TestsMaier, P., Pamidi, E., Clausius, B., Hort, N. (2023)
In: TMS Annual Meeting 2023 & Exhibition, San Diego (USA), - conference lecture: Cetraro (ITA)How accurate does accuracy have to be?Hort, N., Maier, P., Vogt, C. (2023)
In: 15th International Symposium on Biodegradable Metals, Cetraro (ITA), - Other: editorialRelationships between Processing and Properties of Magnesium-Based AlloysWiese, B., Celikin, M., Mendis, C.L. (2023)
In: Crystals, Vol. 13, 6, 882. - Other: datasetDataset and scripts for publication Property design of extruded magnesium-gadolinium alloys through machine learningBerger, S., Wiese, B., Bohlen, J., Nienaber, M., Hoeche, D. (2023)
In: zenodo, - journal articleDevelopment of high strength-ductility Mg-Er extruded alloys by micro-alloying with MnZhou, S., Tang, A., Liu, T., Huang, Y., Peng, P., Zhang, J., Hort, N., Willumeit-Römer, R., Pan, F. (2023)
In: Journal of Alloys and Compounds, Vol. 947, 169669. - journal articleEffect of Deformation Speed on Stress Corrosion and Fracture Toughness of Extruded Mg10Dy and Mg10Dy1Nd Using C-Ring TestsMaier, P., Pamidi, E., Clausius, B., Hort, N. (2023)
In: Magnesium Technology 2023. TMS 2023. The Minerals, Metals & Materials Series, 73-80. - journal articleNon-ignitable dilute Mg–0.36Al–1CaO (wt.%) alloy with high compressive strengthRafiei, S., Habibolahzadeh, A., Wiese, B. (2023)
In: Advances in Materials and Processing Technologies, Vol. 9, 1, 32-46. - conference lecture: San Diego (USA)Metastable–StableHort, N., Maier, P. (2023)
In: TMS Annual Meeting 2023 & Exhibition, San Diego (USA), - journal articleEffect of rotary swaging on the microstructure and mechanical properties of high-strength Mg-Mn-Al-Zn alloysChen, H., Hu, C., Hu, F., Liu, X., Kong, F., Xie, W., Wei, G., Yang, Y., Peng, X., Huang, Y., Hort, N. (2023)
In: Materials Characterization, Vol. 196, 112575. - journal articleProperty design of extruded magnesium-gadolinium alloys through machine learningWiese, B., Berger, S., Bohlen, J., Nienaber, M., Höche, D. (2023)
In: Materials Today : Communications, Vol. 36, 106566. - journal articleDevelopment of a bioreactor-coupled flow-cell setup for 3D in situ nanotomography of Mg alloy biodegradationReimers, J., Trinh, H.C., Wiese, B., Meyer, S., Brehling, J., Flenner, S., Hagemann, J., Kruth, M., Kibkalo, L., Cwieka, H., Hindenlang, B., Lipinska-Chwalek, M., Mayer, J., Willumeit-Roemer, R., Greving, I., Zeller-Plumhoff, B. (2023)
In: ACS Applied Materials and Interfaces, Vol. 15, 29, 35600-35610. - journal articleMetastable–StableHort, N. (2023)
In: Magnesium Technology 2023. TMS 2023. The Minerals, Metals & Materials Series, 11-13.
Link to publisher 2022
- journal articleRevisiting the tolerance limit of Fe impurity in biodegradable magnesiumZhang, Y., Huang, Y., Chen, X., Luthringer-Feyerabend, B., Xue, J., Zander, D., Willumeit-Römer, R., Kainer, K.U., Hort, N. (2022)
In: Scripta Materialia, Vol. 212, 114509. - conference lecture (invited): Anaheim (USA)The Comparability of In Vitro and In Vivo Experiments for Degradable Mg ImplantsWillumeit-Römer, R., Bruns, S., Helmholz, H., Krüger, D., Wiese, B., Galli, S., Moosmann, J., Zeller-Plumhoff, B. (2022)
In: Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition, Anaheim (USA), - conference lecture (invited): Bordeaux (FRA)The comparability of in vitro and in vivo experiments for degradable Mg-implants: basis for a digital twin of implant degradationWillumeit-Römer, R., Bruns, S., Helmholz, H., Hort, N., Krüger, D., Wiese, B., Galli, S., Moosmann, J., Cyron, C., Zeller-Plumhoff, B. (2022)
In: ESB2022 32nd Annual Conference of the European Society for Biomaterials, Bordeaux (FRA), - conference paper:Electrical Resistivity of Binary Mg AlloysZhang, X., Huang, Y., Kodetova, V., Vlach, M., Hort, N. (2022)
In: Magnesium Technology 2022, 43-49. - journal articleAdvances in bioorganic molecules inspired degradation and surface modifications on Mg and its alloysCai, L., Mei, D., Zhang, Z.-Q., Huang, Y.-D., Cui, L.-Y., Guan, S.-K., Chen, D.-C., Kannan, M.B., Zheng, Y.-F., Zeng, R.-C. (2022)
In: Journal of Magnesium and Alloys, Vol. 10, 3, 670-688. - journal articleCharacterization of the deformation state of magnesium by electrical resistanceMeyer, S., Wiese, B., Hort, N., Willumeit-Römer, R. (2022)
In: Scripta Materialia, Vol. 215, 114712. - journal articleDynamic in vivo monitoring of fracture healing process in response to magnesium implant with multimodal imaging: Pilot longitudinal study in a rat external fixation modelSun, Y., Helmholz, H., Will, O., Damm, T., Wiese, B., Luczak, M., Peschke, E., Luthringer-Feyerabend, B., Ebel, T., Hövener, J., Glüer, C., Willumeit-Römer, R. (2022)
In: Biomaterials Science, Vol. 10, 6, 1532-1543. - conference paper:The Comparability of In Vitro and In Vivo Experiments for Degradable Mg ImplantsWillumeit-Römer, R., Bruns, S., Helmholz, H., Krüger, D., Wiese, B., Galli, S., Moosmann, J., Zeller-Plumhoff, B. (2022)
In: Magnesium Technology 2022, 9-16. - conference paper:To Fail or Not to FailHort, N., Maier, P. (2022)
In: Magnesium Technology 2022, 165-168. - journal articleRevealing the role of Al in the microstructural evolution and creep properties of Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloyYang, H., Jiang, B., Huang, G., Huang, Y., Jin, Y., Gavras, S., Dieringa, H. (2022)
In: Materials Science and Engineering: A, Vol. 832, 142358. - journal articleComparison of edge cracking and tensile cracking in in-situ deformation at 150°C of Mg-2Zn-1.5Mn alloy sheetLiu, Q., Song, J., Huang, Y., Jiang, B., Xiao, B., Pan, F. (2022)
In: Journal of Materials Science & Technology, Vol. 112, 24-35. - journal articleEffects of Y Additions on the Microstructures and Mechanical Behaviours of as Cast Mg–xY–0.5Zr AlloysYou, S., Huang, Y., Dieringa, H., Maawad, E., Gan, W., Zhang, Y., Kainer, K., Willumeit-Römer, R., Hort, N. (2022)
In: Advanced Engineering Materials, Vol. 24, 4, 2101033. - journal articleHigh-resolution ex vivo analysis of the degradation and osseointegration of Mg-xGd implant screws in 3DKrüger, D., Galli, S., Zeller-Plumhoff, B., Wieland, F., Peruzzi, N., Wiese, B., Heuser, P., Mossmann, J., Wennerberg, A., Willumeit-Römer, R. (2022)
In: Bioactive Materials, Vol. 13, 37-52. - journal articleSelective laser melting of an Mg/Metallic Glass hybrid for significantly improving chemical and mechanical performancesYao, X., Tang, J., Zhou, Y., Huang, Z., Xu, J., Long, Y., Tan, L., Wiese, B., Ebel, T., Yan, M. (2022)
In: Applied Surface Science, Vol. 580, 152229. - journal articleCompressive deformation of as-extruded LPSO-containing Mg alloys at different temperaturesZhao, D., Zhao, C., Chen, X., Huang, Y., Hort, N., Gavras, S., Pan, F. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 16, 944-959. - Other: editorialEditorial for special issue on developments of magnesium alloys for structural and functional applicationsHuang, Y., Jiang, B. (2022)
In: International Journal of Minerals, Metallurgy and Material, Vol. 29, 7, 1307-1309. - journal articleAchieving advanced elevated-temperature strength by tailoring precipitates in Mg-Sn-Y alloysZeng, Y., Sun, K., Qian, X., Davis, A., Yuan, Y., Jiang, B., Huang, Y., Yin, D. (2022)
In: Journal of Alloys and Compounds, Vol. 924, 166644. - journal articleDegradable magnesium-hydroxyapatite interpenetrating phase composites processed by current assisted metal infiltration in additive-manufactured porous preformsCasas-Luna, M., Montufar, E.B., Hort, N., Díaz-de-la-Torre, S., Méndez-García, J.C., Vištejnová, L., Brínek, A., Daňhel, A., Dvořak, K., Kaiser, J., Čelko, L. (2022)
In: Journal of Magnesium and Alloys, Vol. 10, 12, 3641-3656. - journal articleIn Situ Synchrotron Radiation Diffraction Study of Compression of AZ91 Composites Reinforced with Recycled Carbon FibresMance, S., Dieringa, H., Bohlen, J., Gavras, S., Stark, A., Schell, N., Pereira da Silva, J., Tolnai, D. (2022)
In: Crystals, Vol. 12, 11, 1502. - journal articleIn vivo degradability and biocompatibility of a rheo-formed Mg–Zn–Sr alloy for ureteral implantationTie, D., Guan, R., Liu, H., Chen, M., Ulasevich, S.A., Skorb, E.V., Holt-Torres, P., Lu, X., Hort, N. (2022)
In: Journal of Magnesium and Alloys, Vol. 10, 6, 1631-1639. - journal articleObservations of Microstructure-Oriented Crack Growth in a Cast Mg-Al-Ba-Ca Alloy under Tension, Compression and FatigueMaier, P., Ginesta, D., Clausius, B., Hort, N. (2022)
In: Metals, Vol. 12, 4, 613. - journal articleEffects of Minor Gadolinium Addition and T4 Heat Treatment on Microstructure and Properties of MagnesiumLu, Y., Huang, Y., Bode, J., Vogt, C., Willumeit-Römer, R., Kainer, K., Hort, N. (2022)
In: Advanced Engineering Materials, Vol. 24, 12, 2200966. - conference poster: Kiel (DEU)Electrical resistivity testingMeyer, S., Wiese, B., Hort, N., Willumeit-Römer, R. (2022)
In: International Intelligent Materials 2022, Kiel (DEU), - journal articleSuperior elevated-temperature strength of Mg–Y–Sn alloys with thermostable multi-scale precipitates and grain structureYin, D., Li, S., Sun, K., Fu, R., Zhang, Y., Jiang, B., Huang, Y., Zeng, Y. (2022)
In: Materials Science and Engineering: A, Vol. 852, 143643. - journal articleIn vivo urinary compatibility of Mg-Sr-Ag alloy in swine modelTie, D., Hort, N., Chen, M., Guan, R., Ulasevich, S., Skorb, E.V., Zhao, D., Liu, Y., Holt-Torres, P., Liu, H. (2022)
In: Bioactive Materials, Vol. 7, 254-262. - journal articleReduced yield asymmetry and excellent strength-ductility synergy in Mg-Y-Sm-Zn-Zr alloy via ultra-grain refinement using simple hot extrusionLyu, S., Li, G., Zheng, R., Xiao, W., Huang, Y., Hort, N., Chen, M., Ma, C. (2022)
In: Materials Science and Engineering: A, Vol. 856, 143783. - conference lecture (invited): Kopenhagen (DNK)Laser directed energy deposition with wire of magnesium alloys with and without aluminiumRiekehr, S., Wiese, B., Odermatt, A., Ventzke, V., Kashaev, N. (2022)
In: 2nd Global Summit on 3D Printing & Additive Manufacturing (3DPRINTING-2022), Kopenhagen (DNK), - journal articleProperty Variation of Extruded Mg-Gd Alloys by Mn Addition and ProcessingWiese, B., Harmuth, J., Willumeit-Römer, R., Bohlen, J. (2022)
In: Crystals, Vol. 12, 8, 1036. - journal articleCompatibility of Different Commercial Alloys in High-Temperature, Supercritical Carbon DioxideZhang, G., Jiang, E., Liu, W., Yang, H., Wu, Y., Huang, Y. (2022)
In: Materials, Vol. 15, 13, 4456. - journal articleComparison on Hot Tearing Behavior of Binary Mg–Al, Mg–Y, Mg–Gd, Mg–Zn, and Mg–Ca AlloysSong, J., Zhao, H., Liao, J., Jiang, B., Zhang, A., Huang, Y., Kainer, K.U., Hort, N., Pan, F. (2022)
In: Metallurgical and Materials Transactions A, Vol. 53, 2986-3001. - journal articleNew strategy to solve the ambient strength-ductility dilemma in precipitation-strengthened Mg-Gd alloys via Li additionYu, Z., Huang, Y., Liu, L., Shi, K., Du, B., Liu, K., Li, S., Du, W (2022)
In: Scripta Materialia, Vol. 220, 114901. - journal articleComparison of 2D and 3D Plasma Electrolytic Oxidation (PEO)-Based Coating Porosity Data Obtained by X-ray Tomography Rendering and a Classical Metallographic ApproachKarlova, P., Serdechnova, M., Blawert, C., Lu, X., Mohedano, M., Tolnai, D., Zeller-Plumhoff, B., Zheludkevich, M.L. (2022)
In: Materials, Vol. 15, 18, 6315. - journal articleHot deformation behavior and microstructural evolution for dual-phase Mg–9Li–3Al alloysMa, Z., Li, G., Su, Z., Wei, G., Huang, Y., Hort, N., Hadadzadeh, A., Wells, M.A. (2022)
In: Journal of Materials Research and Technology, Vol. 19, 3536-3545.
Link to publication2021
- journal articleUtilizing Synchrotron Radiation for the Characterization of Biodegradable Magnesium Alloys—From Alloy Development to the Application as Implant MaterialZeller-Plumhoff, B., Tolnai, D., Wolff, M., Greving, I., Hort, N., Willumeit-Römer, R. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100197. - journal articleSurface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: Corrosion behaviour, microhardness and biocompatibilityYao, X., Tang, J., Zhou, Y., Atrens, A., Dargusch, M., Wiese, B., Ebel, T., Yan, M. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, 6, 2155-2168. - journal articleInterdiffusion and atomic mobility in hcp Mg–Al–Sn alloysZhang, Y., Du, C., Liu, Y., Wen, S., Liu, S., Huang, Y., Hort, N., Du, Y. (2021)
In: Journal of Alloys and Compounds, Vol. 871, 159517. - conference poster: VirtualMg-based microparticles (beads) as potential therapeutics for OsteoarthritisMavila, B., Helmholz, H., Wiese, B., Angrisain, N., Luthringer-Feyerabend, B., Willumeit-Römer, R. (2021)
In: Euromat 2021, Virtual, - journal articleMechanism of Mn on inhibiting Fe-caused magnesium corrosionYang, L., He, S., Yang, C., Zhou, X., Lu, X., Huang, Y., Qin, G., Zhang, E. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, 2, 676-685. - journal articleDeteriorated corrosion performance of micro-alloyed Mg-Zn alloy after heat treatment and mechanical processingJin, Y., Blawert, C., Hang, H., Wiese, B., Bohlen, J., Mei, D., Deng, M., Feyerabend, F., Willumeit, R. (2021)
In: Journal of Materials Science & Technology, Vol. 92, 214-224. - journal articleA Unique Quenching and Deformation Dilatometer for Combined In Situ Neutron Diffraction Analysis of Engineering MaterialsLi, X., Hofmann, M., Landesberger, M., Reiberg, M., Zhang, X., Huang, Y., Wang, L., Werner, E., Gan, W. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100163. - journal articleNovel Magnesium Based Materials: Are They Reliable Drone Construction Materials? A Mini ReviewHöche, D., Weber, W., Gazenbiller, E., Gavras, S., Hort, N., Dieringa, H. (2021)
In: Frontiers in Materials, Vol. 8, 575530. - conference paper:Improving the Creep Resistance of Elektron21 by Adding AlN/Al Nanoparticles Using the High Shear Dispersion TechniqueYang, H., Huang, Y., Kainer, K., Dieringa, H. (2021)
In: Magnesium 2021 : Proceedings of the 12th International Conference on Magnesium Alloys and their Applications, 57-69. - Other: editorialProcessing and Characterization of Magnesium-Based MaterialsTolnai, D. (2021)
In: Crystals, Vol. 11, 2, 96. - journal articleInfluence of the amount of intermetallics on the degradation of Mg-Nd alloys under physiological conditionsZhang, Y., Huang, Y., Feyerabend, F., Blawert, C., Gan, W., Maawad, E., You, S., Gavras, S., Scharnagl, N., Bode, J., Vogt, C., Zander, D., Willumeit-Römer, R., Kainer, K., Hort, N. (2021)
In: Acta Biomaterialia, Vol. 121, 695-712. - journal articleRecent progress on control strategies for inherent issues in friction stir weldingMeng, X., Huang, Y., Cao, J., Shen, J., Dos Santos, J. (2021)
In: Progress in Materials Science, Vol. 115, 100706. - journal articlePore characterization of PM Mg–0.6Ca alloy and its degradation behavior under physiological conditionsNidadavolu, E., Krüger, D., Zeller-Plumhoff, B., Tolnai, D., Wiese, B., Feyerabend, F., Ebel, T., Willumeit-Römer, R. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, 2, 686-703. - journal articleAlloying effect of silver in magnesium on the development of microstructure and mechanical properties by indirect extrusionWiese, B., Willumeit-Römer, R., Letzig, D., Bohlen, J. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, 1, 112-122. - journal articleExploring key ionic interactions for magnesium degradation in simulated body fluid – A data-driven approachZeller-Plumhoff, B., Gile, M., Priebe, M., Slominska, H., Boll, B., Wiese, B., Würger, T., Willumeit-Römer, R., Meißner, R. (2021)
In: Corrosion Science, Vol. 182, 109272. - journal articleCrack Propagation in As-Extruded and Heat-Treated Mg-Dy-Nd-Zn-Zr Alloy Explained by the Effect of LPSO Structures and Their Micro- and NanohardnessMaier, P., Clausius, B., Richter, A., Bittner, B., Hort, N., Menze, R. (2021)
In: Materials, Vol. 14, 13, 3686. - journal articleProperties of Mg-based Metal Matrix Nanocomposites Processed by High Shear Dispersion Technique (HSDT) - A ReviewYang, H., Patel, J., Yang, X., Gavras, S., Dieringa, H. (2021)
In: Current Nanomaterials, Vol. 6, 2, 106-118. - journal articleDegradation Analysis of Thin Mg-xAg Wires Using X-ray Near-Field HolotomographyMeyer, S., Wolf, A., Sanders, D., Iskhakova, K., Ćwieka, H., Bruns, S., Flenner, S., Greving, I., Hagemann, J., Willumeit-Römer, R., Wiese, B., Zeller-Plumhoff, B. (2021)
In: Metals, Vol. 11, 9, 1422. - journal articleThe temperature effect on the plastic deformation of the Mg88Zn7Y5 alloy with LPSO phase studied by in-situ synchrotron radiation diffractionFekete, K., Farkas, G., Drozdenko, D., Tolnai, D., Stark, A., Dobroň, P., Garcés, G., Máthis, K. (2021)
In: Intermetallics, Vol. 138, 107321. - book partCreep Characteristics of Metal Matrix CompositesYang, H., Gavras, S., Dieringa, H. (2021)
In: Encyclopedia of Materials: Composites, Vol. 1, 375-388. - journal articleSmall-sized magnesium cylinders influence subchondral bone quality in osteoarthritic rabbits - an in vivo pilot studyAngrisani, N., Willumeit-Römer, R., Windhagen, H., Mavila Chathoth, B., Scheper, V., Wiese, B., Helmholz, H., Reifenrath, J. (2021)
In: European Cells & Materials, Vol. 42, 179-195. - conference lecture: VirtualMagnesium - More than a load-bearing implantWiese, B. (2021)
In: IMA-Webinar: Magnesium Medical Applications — End-Product Focus, Virtual, - journal articleAssessing the microstructure and in vitro degradation behavior of Mg-xGd screw implants using µCTKrüger, D., Zeller-Plumhoff, B., Wiese, B., Yi, S., Zuber, M., Wieland, F., Moosmann, J., Willumeit-Römer, R. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, 6, 2207-2222. - conference lecture: VirtualMechanical properties of Mg-Ag wires with 2; 4 and 6 wt.% AgWiese, B., Meyer, S., Sanders, D., Ebel, T., Willumeit-Römer, R. (2021)
In: 13th Symposium on Biodegradable Metals for Biomedical Applications, Virtual, - journal articleMechanical behaviors of extruded Mg alloys with high Gd and Nd contentXu, Y., Wang, S., Wang, Y., Chen, L., Yang, L., Xiao, L., Hort, N. (2021)
In: Progress in Natural Science: Materials International, Vol. 31, 4, 591-598. - journal articleHigh temperature tensile, compression and creep behavior of recycled short carbon fibre reinforced AZ91 magnesium alloy fabricated by a high shearing dispersion techniqueKandemir, S., Gavras, S., Dieringa, H. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, 5, 1753-1767. - book partCreep Characteristics of Metal Matrix CompositesYang, H., Gavras, S., Dieringa, H. (2021)
In: Encyclopedia of Materials: Composites, Vol. 1, 375-388. - journal articleIn Situ Synchrotron Tomography of the Solidification of an Elektron 21 Mg AlloyTolnai, D., Gavras, S., Wilde, F., Hammel, J., Bruns, S. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2100383. - journal articleMicrostructure, mechanical properties and fracture behaviors of large-scale sand-cast Mg-3Y-2Gd-1Nd-0.4Zr alloyYang, L., Huang, Y., Hou. Z., Xiao, L., Xu, Y., Dong, X., Li, F., Kurz, G., Sun, B., Li, Z., Hort, N. (2021)
In: Journal of Magnesium and Alloys, - conference lecture: VirtualGrain refinement in cold drawn Mg-xAg wiresMeyer, S., Wiese, B., Ebel, T., Willumeit-Römer, R. (2021)
In: 13th Biometal 2021, Virtual, - conference lecture: VirtualImplantation of pure magnesium beads in the subchondral bone plate to influence bone quality in osteoarthritic rabbitsReifenrath, J., Willumeit-Römer, R., Windhagen, H., Wiese, B., Mavila, B., Helmholz, H., Scheper, V., Angrisani, N. (2021)
In: 13th Symposium on Biodegradable Metals for Biomedical Applications, Virtual,
2020
- journal articleAlloying and Processing Effects on the Microstructure, Mechanical Properties, and Degradation Behavior of Extruded Magnesium Alloys Containing Calcium, Cerium, or SilverBohlen, J., Meyer, S., Wiese, B., Luthringer-Feyerabend, B.J.C., Willumeit-Römer, R., Letzig, D. (2020)
In: Materials, Vol. 13, 2, 391. - conference paper:Investigation and Modelling of the Influence of Cooling Rates on the Microstructure of AZ91 AlloysGavras, S., Bilal, M., Tolnai, D., Hort, N. (2020)
In: Magnesium Technology 2020, 281-287. - conference paper:Predicting the interfacial heat transfer coefficient of cast Mg-Al alloys using Beck's inverse analysisBilal, M., Hort, N. (2020)
In: IOP Conference Series: Materials Science and Engineering, Vol. 861, 1, 012027. - conference lecture: Jönköping (SWE)Predicting the interfacial heat transfer coefficient of cast Mg-Al alloys using Beck's inverse analysisBilal, M., Hort, N. (2020)
In: International Conference on Modelling of Casting; Welding and Advanced Solidification Processes (MCWASP XV), Jönköping (SWE), - journal articleEffects of heat treatment on the microstructural evolution and creep resistance of Elektron21 alloy and its nanocompositeYang, H., Zander, D., Jiang, B., Huang, Y., Gavras, S., Kainer, K., Dieringa, H. (2020)
In: Materials Science and Engineering A, Vol. 789, 139669. - conference lecture: VirtualThe grain refinement effect of gadolinium in magnesium at modified extrusion ratioMeyer, S., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Römer, R. (2020)
In: Updates in Bioabsorbable Metals 2020, Virtual, - journal articleRoles of Nd and Mn in a new creep-resistant magnesium alloyMo, N., McCarroll, I., Tan, Q., Ceguerra, A., Cairney, J., Dieringa, H., Huang, Y., Jiang, B., Pan, F., Bermingham, M., Zhang, M.-X. (2020)
In: Materials Science and Engineering A, Vol. 779, 139152. - journal articleAnalysis of the bone ultrastructure around biodegradable Mg–xGd implants using small angle X-ray scattering and X-ray diffractionZeller-Plumhoff, B., Malich, C., Krueger, D., Campbell, G., Wiese, B., Galli, S., Wennerberg, A., Willumeit-Römer, R., Wieland, D.C.F. (2020)
In: Acta Biomaterialia, Vol. 101, 637-645. - journal articleFormation mechanism of the abnormal texture during extrusion in Mg-Y-Sm-Zn-Zr alloyLyu, S., Xiao, W., Li, G., Xia, D., Huang, Y., Gavras, S., Hort, N., Zheng, R., Ma, C. (2020)
In: Journal of Alloys and Compounds, Vol. 821, 153477. - journal articleIn situ compressive investigations on the effects of solid solution Gd on the texture and lattice strain evolution of MgXu, Y., Huang, Y., Zhong, Z., You, S., Gan, W., Xiao, B., Maawad, E., Schell, N., Gensch, F., Pan, F., Hort, N. (2020)
In: Materials Science and Engineering A, Vol. 774, 138938. - journal articleIn-situ characterization of continuous dynamic recrystallization during hot torsion of an Al–Si–Mg alloyCanelo-Yubero, D., Kovács, Z., Simonet Fotso, J., Tolnai, D., Schell, N., Groma, I., Poletti, C. (2020)
In: Journal of Alloys and Compounds, Vol. 822, 153282. - journal articleThixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistanceBuzolin, R., Volovitch, P., Maltseva, A., Lamaka, S., Blawert, C., Mendis, C., Lohmüller, A., Kainer, K., Hort, N. (2020)
In: Materials and Corrosion, Vol. 71, 3, 339-351. - journal articleIndividual/synergistic effects of Al and AlN on the microstructural evolution and creep resistance of Elektron21 alloyYang, H., Zander, D., Huang, Y., Kainer, K., Dieringa, H. (2020)
In: Materials Science and Engineering A, Vol. 777, 139072. - journal articleMicrostructure-corrosion behaviour relationship of micro-alloyed Mg-0.5Zn alloy with the addition of Ca, Sr, Ag, In and CuJin, Y., Blawert, C., Yang, H., Wiese, B., Feyerabend, F., Bohlen, J., Mei, D., Deng, M., Silva Campos, M., Scharnagl, N., Strecker, K., Bode, J., Vogt, C., Willumeit-Römer, R. (2020)
In: Materials and Design, Vol. 195, 108980. - journal articleMicrostructure and mechanical properties of large-scale Mg-Gd-Y-Zn-Mn alloys prepared through semi-continuous castingWang, K., Wang, J., Dou, X., Huang, Y., Hort, N., Gavras, S., Liu, S., Cai, Y., Pan, F. (2020)
In: Journal of Materials Science and Technology, Vol. 52, 72-82. - journal articleEffects of Intermetallic Microstructure on Degradation of Mg-5Nd AlloyZhang, Y., Huang, Y., Feyerabend, F., Gavras, S., Xu, Y., Willumeit-Römer, R., Ulrich Kainer, K., Hort, N. (2020)
In: Metallurgical and Materials Transactions A, Vol. 51, 5498-5515. - journal articleIn-situ synchrotron investigation of the phases- and their morphology-development in Mg–Nd–Zn alloysTolnai, D., Sosro, T., Gavras, S., Buzolin, R., Hort, N. (2020)
In: International Journal of Materials Research, Vol. 111, 1, 4-10. - journal articleHot deformation of Mg-Y-Zn alloy with a low content of the LPSO phase studied by in-situ synchrotron radiation diffractionHorváth Fekete, K., Drozdenko, D., Čapek, J., Máthis, K., Tolnai, D., Stark, A., Garcés, G., Dobroň, P. (2020)
In: Journal of Magnesium and Alloys, Vol. 8, 1, 199-209. - journal articleMicrostructural, mechanical and corrosion characterization of an as-cast Mg–3Zn–0.4Ca alloy for biomedical applicationsPulido-Gonzáles, N., Torres, B., Rodrigo, P., Hort, N., Rams, J. (2020)
In: Journal of Magnesium and Alloys, Vol. 8, 2, 510-522. - journal articleMechanical behaviors of novel multiple principal elements CuAl10Fe5Ni5Mn1.2 wt% with micro-nano structuresFu, Y., Huang, Y., Liu, Z., Guo, R., Li, S. (2020)
In: Journal of Alloys and Compounds, Vol. 843, 155993. - journal articleAdditively manufactured biomedical Ti-Nb-Ta-Zr lattices with tunable Young's modulus: Mechanical property, biocompatibility, and proteomics analysisLuo, J., Huang, Y., Xu, J., Sun, J., Dargusch, M., Hou, C., Ren, L., Wang, R., Ebel, T., Yan, M. (2020)
In: Materials Science and Engineering C, Vol. 114, 110903. - journal articleAchieving enhanced mechanical properties in Mg-Gd-Y-Zn-Mn alloy by altering dynamic recrystallization behavior via pre-ageing treatmentWang, K., Dou, X., Wang, J., Huang, Y., Gavras, S., Hort, N., Liu, S., Hu, H., Wang, J., Pan, F. (2020)
In: Materials Science and Engineering: A, Vol. 790, 139635. - conference paper:Investigation on the Microstructure and Mechanical Properties of Mg–Gd–Nd Ternary AlloysXu, Y., Yang, L., Liu, W., Sun, J., Xiao, L., Jiang, X., Hort, N. (2020)
In: Magnesium Technology 2020, 79-85. - conference lecture: San Diego (USA)Investigation on the Microstructure and Mechanical Properties of Mg–Gd–Nd Ternary AlloysXu, Y., Yang, L., Liu, W., Sun, J., Xiao, L., Jiang, X., Hort, N. (2020)
In: TMS Annual Meeting 2020, San Diego (USA), - journal articleEffect of Nd Additions on the Mechanical Properties of Mg Binary AlloysXu, Y., Gavras, S., Gensch, F., Kainer, K., Hort, N. (2020)
In: JOM: The Journal of the Minerals, Metals and Materials Society, Vol. 72, 1, 517-522. - conference paper:Effect of Gd and Nd Additions on the Thermo-Mechanical Response of a MgMn AlloyTolnai, D., Sarkis, G., Barriobero-Vila, P., Stark, A., Schell, N. (2020)
In: Magnesium Technology 2020, 37-42. - journal articleIn vivo assessment of biodegradable magnesium alloy ureteral stents in a pig modelTie, D., Liu, H., Guan, R., Holt-Torres, P., Liu, Y., Wang, Y., Hort, N. (2020)
In: Acta Biomaterialia, Vol. 116, 415-425. - journal articleCharacterization of an Extruded Mg-Dy-Nd Alloy during Stress Corrosion with C-Ring TestsMaier, P., Clausius, B., Wicke, J., Hort, N. (2020)
In: Metals, Vol. 10, 5, 584. - journal articleRestoration Mechanisms at Moderate Temperatures for As-Cast ZK40 Magnesium Alloys Modified with Individual Ca and Gd AdditionsBuzolin, R., Guimaraes, L., Díaz, J., da Silva, E., Tolnai, D., Mendis, C., Hort, N., Pinto, H. (2020)
In: Crystals, Vol. 10, 12, 1140. - journal articleInfluence of Solution Heat Treatment on the Microstructure, Hardness and Stress Corrosion Behavior of Extruded Resoloy®Maier, P., Steinacker, A., Clausius, B., Hort, N. (2020)
In: JOM: The Journal of the Minerals, Metals and Materials Society, Vol. 72, 1870-1879. - Other: editorialMagnesium Alloys for Biomedical ApplicationsMaier, P., Hort, N. (2020)
In: Metals, Vol. 10, 10, 1328. - journal articleDynamic tensile properties and microstructural evolution of extruded EW75 magnesium alloy at high strain ratesYu, J., Song, B., Xia, D., Zeng, X., Huang, Y., Hort, N., Mao, P., Liu, Z. (2020)
In: Journal of Magnesium and Alloys, Vol. 8, 3, 849-859. - journal articleEffect of biaxial compressive stress state on the microstructure evolution and deformation compatibility of rolled sheet Mg alloy AZ31 at room temperatureXia, D., Zhang, J., Chen, X., Huang, G., Jiang, B., Tang, A., Gavras, S., Huang, Y., Hort, N., Pan, F. (2020)
In: Materials Science and Engineering: A, Vol. 789, 139599.
2019
- journal articleThe Role of Second Phases on the Creep Behavior of As-Cast and Hot-Extruded Mg-Ca-Zr AlloysYou, S., Huang, Y., Dieringa, H., Maawad, E., Gan, W., kainer, K.U., Hort, N. (2019)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 71, 7, 2227-2234. - journal articleMechanical and Corrosion Properties of Two Precipitation-Hardened Mg-Y-Nd-Gd-Dy Alloys with Small Changes in Chemical CompositionMaier, P., Lauth, N., Mendis, C.L., Bechly, M., Hort, N. (2019)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 71, 4, 1426-1435. - book partConnected Process Design for Hot Working of a Creep-Resistant Mg–4Al–2Ba–2Ca Alloy (ABaX422)Rao, K.P., Chalasani, D., Suresh, K., Prasad, Y.V.R.K., Dieringa, H., Hort, N. (2019)
In: Material and Process Design for Lightweight Structures, Vol. 1319, 90-103. - journal articleCalculation of Schmid factor in Mg alloys: Influence of stress stateXia, D., Chen, X., Huang, G., Jiang, B., Tang, A., Yanh, H., Gavras, S., Huang, Y., Hort, N., Pan, F. (2019)
In: Scripta Materialia, Vol. 171, 31-35. - journal articleInfluences of AlN/Al Nanoparticles on the Creep Properties of Elektron21 Prepared by High Shear Dispersion TechnologyYang, H., Huang, Y., Gavras, S., Kainer, K.U., Hort, N., Dieringa, H. (2019)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 71, 7, 2245-2252. - journal articleDeveloping a die casting magnesium alloy with excellent mechanical performance by controlling intermetallic phaseMeng, F., Lv, S., Yang, Q., Qin, P., Zhang, J., Guan, K., Huang, Y., Hort, N., Li, B., Liu, X., Meng, J. (2019)
In: Journal of Alloys and Compounds, Vol. 795, 436-445. - conference paper: San Antonio, TX (USA)Microstructures, Corrosion and Mechanical Properties of Mg–Si Alloys as Biodegradable Implant MaterialsWang, W., Gao, M., Huang, Y., Tan, L., Yang, K., Hort, N. (2019)
In: Magnesium Technology 2019, 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), 151-157. - journal articleUnexpected Expansion Behavior of Mg-Al Alloys During Isothermal AgeingZhang, X., Huang, Y., Li, X., Gan, W., Kainer, K.U., Hort, N. (2019)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 71, 8, 2906-2912. - conference lecture: Salzburg (A)Grain refinements of magnesium alloys inoculated by additions of external SiC particlesHuang, Y., Gu, J., You, S., Kainer, K.U., Hort, N. (2019)
In: 5th International Conference on Advances in Solidification Processes, ICASP-5 - 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining, CSSCR-5, Salzburg (A), - journal articleAbnormal extrusion texture and reversed yield asymmetry in a Mg–Y-Sm-Zn-Zr alloyLyu, S., Zheng, R., Xiao, W., Huang, Y., Gavras, S., Hort, N., Li, G., Ma, C. (2019)
In: Materials Science and Engineering A, Vol. 760, 426-430. - journal articleEffects of samarium content on microstructure and mechanical properties of Mg–0.5Zn–0.5Zr alloyGuan, K., Meng, F., Qin, P., Yang, Q., Zhang, D., Li, B., Sun, W., Lv, S., Huang, Y., Hort, N., Meng, J. (2019)
In: Journal of Materials Science and Technology, Vol. 35, 7, 1368-1377. - conference paper: San Antonio, TX (USA)Influences of SiC Particle Additions on the Grain Refinement of Mg–Zn AlloysHuang, Y., Gu, J., You, S., Kainer, K.U., Hort, N. (2019)
In: Magnesium Technology 2019, 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), 331-338. - conference lecture: San Antonio, TX (USA)Microstructures, corrosion and mechanical properties of Mg-Si alloys as biodegradable implant materialsWang, W., Gao, M., Huang, Y., Tan, L., Yang, K., Hort, N. (2019)
In: 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), - conference paper: San Antonio, TX (USA)Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical ModelingRao, K.P., Suresh, K., Prasad, Y.V.R.K., Dharmendra, C., Hort, N. (2019)
In: Magnesium Technology 2019, 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), 313-318. - conference lecture: San Antonio, TX (USA)Forging of Mg-3Sn-2Ca-0.4Al alloy assisted by its processing map and validation through analytical modellingRao, K.P., Suresh, K., Prasad, Y.V.R.K., Dharmendra, C., Hort, N. (2019)
In: 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), - conference lecture: San Antonio, TX (USA)Influences of SiC particle additions on the grain refinement of Mg-Zn alloysHuang, Y., Gu, J., You, S., Kainer, K.U., Hort, N. (2019)
In: 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), - conference paper: San Antonio, TX (USA)Metallography of Mg AlloysHort, N., Floss, V., Gavras, S., Wiese, G., Tolnai, D. (2019)
In: Magnesium Technology 2019, 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), 267-276. - conference lecture: San Antonio, TX (USA)Metallography of Mg AlloysHort, N., Floss, V., Gavras, S., Wiese, G., Tolnai, D. (2019)
In: 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), - journal articleInfluences of Al and high shearing dispersion technique on the microstructure and creep resistance of Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloyYang, H., Huang, Y., Tolnai, D., Kainer, K.U., Dieringa, H. (2019)
In: Materials Science and Engineering A, Vol. 764, 138215. - conference paper: San Antonio, TX (USA)Effect of Alloying with Rare-Earth Metals on the Degradation of Magnesium Alloys Studied Using a Combination of Isothermal Calorimetry and Pressure MeasurementsWadsoe, L., Hort, N., Orlov, D. (2019)
In: Magnesium Technology 2019, 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), 121-126. - conference lecture: San Antonio, TX (USA)Effect of alloying with rare-earth metals on the degradation of magnesium alloys studied using a combination of isothermal calorimetry and pressure measurementsWadsoe, L., Hort, N., Orlov, D. (2019)
In: 148th Annual Meeting & Exhibition, TMS 2019, San Antonio, TX (USA), - journal articleEnhancing the creep resistance of AlN/Al nanoparticles reinforced Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloy by a high shear dispersion techniqueYang, H., Huang, Y., Song, B., Kainer, K.U., Dieringa, H. (2019)
In: Materials Science and Engineering A, Vol. 755, 18-27. - journal articleMicrostructures and mechanical properties of a hot-extruded Mg−8Gd−3Yb−1.2Zn−0.5Zr (wt%) alloyLi, B., Guan, K., Yang, Q., Niu, X., Zhang, D., Lv, S., Meng, F., Huang, Y., Hort, N., Meng, J. (2019)
In: Journal of Alloys and Compounds, Vol. 776, 666-678. - journal articleAcetic Acid Etching of Mg-xGd AlloysGawlik, M.M., Wiese, B., Welle, A., Gonzalez, J., Desharnais, V., Harmuth, J., Ebel, T., Willumeit-Roemer, R. (2019)
In: Metals, Vol. 9, 2, 117. - journal articleTime-sequential corrosion behaviour observation of micro-alloyed Mg-0.5Zn-0.2Ca alloy via a quasi-in situ approachJin, Y., Blawert, C., Feyerabend, F., Bohlen, J., Silva Campos, M., Gavras, S., Wiese, B., Mei, D., Deng, M., Yang, H., Willumeit-Roemer, R. (2019)
In: Corrosion Science, Vol. 158, 108096. - journal articleGrain refinements of magnesium alloys inoculated by additions of external SiC particlesHuang, Y., Gu, J., You, S., Kainer, K.U., Hort, N. (2019)
In: IOP Conference Series: Materials Science and Engineering, Vol. 529, 1, 012049. - conference poster: Alicante (E)Impact of etching on the degradation of Mg-Gd alloysGawlik, M.M., Ebel, T., Willumeit-Roemer, R., Wiese, B. (2019)
In: 11th Symposium on Biodegradable Metals, Biometal 2019, Alicante (E), - journal articleInfluence of Torsion on Precipitation and Hardening Effects during Aging of an Extruded AZ91 AlloySong, B., Liu, T., Xin, R., Yang, H., Guo, N., Chai, L., Huang, Y., Hort, N. (2019)
In: Journal of Materials Engineering and Performance, Vol. 28, 7, 4403-4414. - journal articleMicroscopic deformation compatibility during biaxial tension in AZ31 Mg alloy rolled sheet at room temperatureXia, D., Huang, G., Liu, S., Tang, A., Gavras, S., Huang, Y., Hort, N., Jiang, B., Pan, F. (2019)
In: Materials Science and Engineering: A, Vol. 756, 1-10. - journal articleThe Effect of Equal-Channel Angular Pressing on the Microstructure, the Mechanical and Corrosion Properties and the Anti-Tumor Activity of Magnesium Alloyed with SilverEstrin, Y., Martynenko, N., Anisimova, N., Temralieva, D., Kiselevskiy, M., Serebryany, V., Raab, G., Straumal, B., Wiese, B., Willumeit-Römer, R., Dobatkin, S. (2019)
In: Materials, Vol. 12, 23, 3832. - conference paper:Thermo-mechanical Processing of EZK Alloys in a Synchrotron Radiation BeamTolnai, D., Dupont, M., Gavras, S., Mathis, K., Klaudia, H., Stark, A., Schell, N. (2019)
In: Magnesium Technology 2019, 297-303. - journal articleIn situ synchrotron diffraction analysis of Zn additions on the compression properties of NK30Tolnai, D., Dupont, M.-A., Gavras, S., Fekete-Horváth, K., Stark, A., Schell, N., Máthis, K. (2019)
In: Materials, Vol. 12, 23, 3935. - conference lecture: Feucht (D)Medizinisches Magnesium: Ein aktueller ÜberblickWiese, B., Ebel, T., Willumeit-Römer, R. (2019)
In: 37. Arbeitskreis Magnesium, Feucht (D), - conference lecture: Manchester/UKInfluence of Al on the microstructural evolution and creep properties of Elektron21 processed by high shearing dispersion techniqueDieringa, H., Yang, H., Huang, Y., Tolnai, T., Kainer, K. (2019)
In: LightMAT2019, Manchester/UK, - journal articleWide Range Mechanical Customization of Mg-Gd Alloys With Low Degradation Rates by ExtrusionHarmuth, J., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Römer, R. (2019)
In: Frontiers in Materials, Vol. 6, 201. - journal articleEnhanced tensile plasticity of a CuZr-based bulk metallic glass composite induced by ion irradiationXue, P., Pauly, S., Gan, W., Jiang, S., Fan, H., Ning, Z., Huang, Y., Sun, J. (2019)
In: Journal of Materials Science & Technology, Vol. 35, 10, 2221-2226. - conference lecture: Manchester (GB)Influence of Al on the microstructural evolution and creep properties of Elektron21 processed by high shearing dispersion techniqueDieringa, H., Yang, H., Huang, Y., Tolnai, D., Kainer, K.U. (2019)
In: 3rd International Conference on Light Materials - Science and Technology, LightMAT 2019, Manchester (GB), - journal articleUnderstanding solid solution strengthening at elevated temperatures in a creep-resistant Mg–Gd–Ca alloyMo, N., McCarroll, I., Tan, Q., Ceguerra, A., Liu, Y., Cairney, J., Dieringa, H., Huang, Y., Jiang, B., Pan, F., Bermingham, M., Zhang, M.-X. (2019)
In: Acta Materialia, Vol. 181, 185-199. - conference paper:Continuous dynamic recrystallization during hot torsion of an aluminum alloyPoletti, C., Simonet-Fotso, T., Halici, D., Canelo Yubero, D., Montheillet, F., Piot, D., Kovacs, Z., Schell, N., Tolnai, D. (2019)
In: Journal of Physics: Conference Series, Vol. 1270, 1, 012049. - journal articlePowder metal injection moulding and heat treatment of AZ81 Mg alloySchaper, J.G., Wolff, M., Wiese, B., Ebel, T., Willumeit-Römer, R. (2019)
In: Journal of Materials Processing Technology, Vol. 267, 241-246. - conference object: Birmingham (GB)Numerical Prediction of the Interfacial Heat Transfer Coefficient for Permanent Mold Casting of Mg-Al AlloysBilal, M.U., Hort, N. (2019)
In: Proceedings of Liquid Metal Processing & Casting Conference 2019, Birmingham (GB), 267-274. - conference poster: Alicante (E)Microstructure of a Si contaminated Mg-Zn-Ca alloy and the corrosion behaviour observation via an in-situ approachJin, Y., Feyerabend, F., Blawert, C., Bohlen, J., Wiese, B., Willumeit-Roemer, R. (2019)
In: 11th Symposium on Biodegradable Metals, Biometal 2019, Alicante (E), - conference object: Alicante (E)Microstructure of a Si contaminated Mg-Zn-Ca alloy and the corrosion behaviour observation via an in-situ approachJin, Y., Feyerabend, F., Blawert, C., Bohlen, J., Wiese, B., Willumeit-Roemer, R. (2019)
In: Abstract Book, 11th Symposium on Biodegradable Metals, Biometal 2019, Alicante (E), Cor-7. - conference lecture: Birmingham (GB)Numerical Prediction of the Interfacial Heat Transfer Coefficient for Permanent Mold Casting of Mg-Al AlloysBilal, M.U., Hort, N. (2019)
In: Liquid Metal Processing & Casting Conference 2019, Birmingham (GB), - conference object: Alicante (E)Impact of etching on the degradation of Mg-Gd alloysGawlik, M.M., Ebel, T., Willumeit-Roemer, R., Wiese, B. (2019)
In: Abstract Book, 11th Symposium on Biodegradable Metals, Biometal 2019, Alicante (E), Cor-17. - journal articleCompressive creep behaviour of high-pressure die-cast aluminium-containing magnesium alloys developed for elevated temperature applicationsGavras, S., Zhu, S., Easton, M.A., Gibson, M.A., Dieringa, H. (2019)
In: Frontiers in Materials, Vol. 6, 262. - journal articleRole of Ca on the corrosion resistance of Mg–9Al and Mg–9Al–0.5Mn alloysMingo, B., Mohedano, M., Blawert, C., del Olmo, R., Hort, N., Arrabal, R. (2019)
In: Journal of Alloys and Compounds, Vol. 811, 151992. - conference lecture: Dresden (D)Druckkriechverhalten moderner aluminiumhaltiger Magnesiumlegierungen fuer den DruckgussDieringa, H., Gavras, S. (2019)
In: Werkstoffwoche 2019, Dresden (D),
2018
- journal articleDeformation Mechanisms and Formability Window for As-Cast Mg-6Al-2Ca-1Sn-0.3Sr Alloy (MRI 230D)Suresh, K., Rao, K.P., Chalasani, D., Krishna, P.Y.V.R., Hort, N., Dieringa, H. (2018)
In: Journal of Materials Engineering and Performance, Vol. 27, 3, 1440-1449. - conference paper: Phoenix, AZ (USA)Magnesium-Based Metal Matrix Nanocomposites - Processing and PropertiesDieringa, H., Hort, N. (2018)
In: Supplemental Proceedings, 147th Annual Meeting & Exhibition, TMS 2018 - Symposium on Functional Nanomaterials: Discovery and Integration of Nanomaterials, Phoenix, AZ (USA), 679-691. - journal articleHot Deformation Behavior and Processing Map of Mg-3Sn-2Ca-0.4Al-0.4Zn AlloyDharmendra, C., Rao, K.P., Suresh, K., Hort, N. (2018)
In: Metals, Vol. 8, 4, 216. - journal articleUnraveling Recrystallization Mechanisms Governing Texture Development from Rare-Earth Element Additions to MagnesiumImandoust, A., Barrett, C.D., Al-Samman, T., Tschopp, M.A., Essadiqi, E., Hort, N., El Kadiri, H. (2018)
In: Metallurgical and Materials Transactions A, Vol. 49, 5, 1809-1829. - journal articleIn vitro biodegradation testing of Mg-alloy EZK400 and manufacturing of implant prototypes using PM (powder metallurgy) methodsWolff, M., Luczak, M., Schaper, J.G., Wiese, B., Dahms, M., Ebel, T., Willumeit-Roemer, R., Klassen, T. (2018)
In: Bioactive Materials, Vol. 3, 3, 213-217. - journal articleCorrosion behaviour of as-cast ZK40 with CaO and Y additionsBuzolin, R.H., Mohedano, M., Mendis, C.L., Mingo, B., Tolnai, D., Blawert, C., Kainer, K.U., Pinto, H., Hort, N. (2018)
In: Transactions of Nonferrous Metals Society of China, Vol. 28, 3, 427-439. - journal articleZum Einfluss des Loesungsgluehens und Aushaertens auf die Mikrostruktur von ZK40-Legierungen, modifiziert durch Zugaben von Ca, Gd, Nd und Y - On the Influence of Solution and Ageing Treatments on the Microstructure of ZK40 Alloys Modified with Ca, Gd, Nd and YBuzolin, R.H., Mendis, C.L., Tolnai, D., Pereira da Silva, E., Kainer, K.U., Hort, N., Cavalcanti Pinto, H. (2018)
In: Practical Metallography - Praktische Metallographie, Vol. 55, 5, 268-287. - journal articleReview on Hot Working Behavior and Strength of Calcium-Containing Magnesium AlloysRao, K.P., Prasad, Y.V.R.K., Dharmendra, C., Suresh, K., Hort, N., Dieringa, H. (2018)
In: Advanced Engineering Materials, Vol. 20, 9, 1701102. - journal articleEnhancement of Strength and Hot Workability of AZX312 Magnesium Alloy by Disintegrated Melt Deposition (DMD) Processing in Contrast to Permanent Mold CastingRao, K.P., Suresh, K., Prasad, Y.V.R.K., Hort, N., Gupta, M. (2018)
In: Metals, Vol. 8, 6, 437. - conference lecture: Phoenix, AZ (USA)Magnesium-Based Metal Matrix Nanocomposites - Processing and PropertiesDieringa, H., Hort, N. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018, Symposium on Functional Nanomaterials: Discovery and Integration of Nanomaterials, Phoenix, AZ (USA), - journal articleCurrent development of creep-resistant magnesium cast alloys: A reviewMo, N., Tan, Q., Bermingham, M., Huang, Y., Dieringa, H., Hort, N., Zhang, M.-X. (2018)
In: Materials and Design, Vol. 155, 422-442. - journal articleThe Effect of Zn Content on the Mechanical Properties of Mg-4Nd-xZn Alloys (x = 0, 3, 5 and 8 wt.%)Gavras, S., Buzolin, R.H., Subroto, T., Stark, A., Tolnai, D. (2018)
In: Materials, Vol. 11, 7, 1103. - journal articleThe effect of Y addition on recrystallization and mechanical properties of Mg–6Zn–xY–0.5Ce–0.4Zr alloysLiu, L., Pan, F., Chen, X., Huang, Y., Song, B., Yang, H., Hort, N. (2018)
In: Vacuum, Vol. 155, 445-455. - journal articleConnected Process Design for Hot Working of a Creep-Resistant Mg–4Al–2Ba–2Ca Alloy (ABaX422)Rao, K.P., Chalasani, D., Suresh, K., Prasad, Y.V.R.K., Dieringa, H., Hort, N. (2018)
In: Metals, Vol. 8, 6, 463. - conference paper: Phoenix, AZ (USA)Mg Alloys: Challenges and Achievements in Controlling Performance, and Future Application PerspectivesDieringa, H., Hort, N., Letzig, D., Bohlen, J., Hoeche, D., Blawert, C., Zheludkevich, M., Kainer, K.U. (2018)
In: Conference Proceedings, Magnesium Technology 2018, TMS 2018, Phoenix, AZ (USA), 3-14. - conference lecture: Old Windsor (GB)Microstructure and degradation properties of Mg-Gd-Ag-Ca alloys as biodegradable implant materialsLu, Y., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Kainer, K.U., Hort, N. (2018)
In: 11th International Conference on Magnesium Alloys and Their Applications, Mg 2018, Old Windsor (GB), - conference paper: Phoenix, AZ (USA)Magnesium Pistons in Engines: Fiction or Fact?Hort, N., Dieringa, H., Kainer, K.U. (2018)
In: Conference Proceedings, Magnesium Technology 2018, TMS 2018, Phoenix, AZ (USA), 349-353. - conference lecture: Phoenix, AZ (USA)Magnesium Pistons in Engines: Fiction or Fact?Hort, N., Dieringa, H., Kainer, K.U. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018 - Symposium Magnesium Technology 2018, Phoenix, AZ (USA), - conference paper: Phoenix, AZ (USA)Visualization of Implant Failure by Synchrotron TomographyWillumeit-Roemer, R., Moosmann, J., Zeller-Plumhoff, B., Wieland, D.C.F., Krueger, D., Wiese, B., Wennerberg, A., Peruzzi, N., Galli, S., Beckmann, F., Hammel, J.U. (2018)
In: TMS 2018, 147th Annual Meeting & Exhibition, Supplemental Proceedings, Phoenix, AZ (USA), 275-284. - journal articleThe Role of Zn Additions on the Microstructure and Mechanical Properties of Mg–Nd–Zn AlloysGavras, S., Subroto, T., Buzolin, R.H., Hort, N., Tolnai, D. (2018)
In: International Journal of Metalcasting, Vol. 12, 3, 428-433. - conference lecture (invited): Phoenix, AZ (USA)Mg Alloys: Challenges and Achievements in Controlling Performance, and Future Application PerspectivesDieringa, H., Hort, N., Letzig, D., Bohlen, J., Hoeche, D., Blawert, C., Zheludkevich, M., Kainer, K.U. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018 - Symposium Magnesium Technology 2018, Phoenix, AZ (USA), - conference paper: Phoenix, AZ (USA)Hot Forging Behavior of Mg−8Al−4Ba−4Ca (ABaX844) Alloy and Validation of Processing MapRao, K.P., Dharmendra, C., Prasad, Y.V.R.K., Dieringa, H., Hort, N. (2018)
In: Conference Proceedings, Magnesium Technology 2018, TMS 2018, Phoenix, AZ (USA), 289-296. - conference lecture: Phoenix, AZ (USA)Hot Forging Behavior of Mg−8Al−4Ba−4Ca (ABaX844) Alloy and Validation of Processing MapRao, K.P., Dharmendra, C., Prasad, Y.V.R.K., Dieringa, H., Hort, N. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018 - Symposium Magnesium Technology 2018, Phoenix, AZ (USA), - conference lecture: Phoenix, AZ (USA)Magnesium Alloys in Transportation: Hidden Champions?Kainer, K.U., Hort, N. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018 - Symposium Energy and Transportation from a European Materials Perspective, Phoenix, AZ (USA), - conference paper: Phoenix, AZ (USA)Microstructure and Mechanical Properties of Mg-Gd Alloys as Biodegradable Implant MaterialsLu, Y., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Kainer, K.U., Hort, N. (2018)
In: TMS 2018, 147th Annual Meeting & Exhibition, Supplemental Proceedings, Phoenix, AZ (USA), 253-262. - conference lecture: Phoenix, AZ (USA)Microstructure and Mechanical Properties of Mg-Gd Alloys as Biodegradable Implant MaterialsLu, Y., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Kainer, K.U., Hort, N. (2018)
In: 147th Annual Meeting & Exhibition, Magnesium Technology 2018, Phoenix, AZ (USA), - conference lecture: Old Windsor (GB)Microstructural Changes of an Extruded WE33 Alloy during Precipitation HardeningMaier, P., Gavras, S., Freese, M., Schott, G., Hort, N. (2018)
In: 11th International Conference on Magnesium Alloys and Their Applications, Mg 2018, Old Windsor (GB), - journal articleSolid solution treatment on strength and corrosion of biodegradable Mg6Ag wiresMaier, P., Zimmermann, F., Rinne, M., Szakacs, G., Hort, N., Vogt, C. (2018)
In: Materials and Corrosion, Vol. 69, 2, 178-190. - journal articleNew methods for in vivo degradation testing of future stent materialsBartosch, M., Peters, H., Koerner, A., Schmitt, B., Berger, F., Hort, N., Witte, F. (2018)
In: Materials and Corrosion, Vol. 69, 2, 156-166. - conference lecture: Phoenix, AZ (USA)Visualization of Implant Failure by Synchrotron TomographyWillumeit-Roemer, R., Moosmann, J., Zeller-Plumhoff, B., Wieland, D.C.F., Krueger, D., Wiese, B., Wennerberg, A., Peruzzi, N., Galli, S., Beckmann, F., Hammel, J.U. (2018)
In: 147th Annual Meeting & Exhibition, TMS 2018, Phoenix, AZ (USA), - conference paper: Old Windsor (GB)Microstructure and degradation properties of Mg-Gd-Ag-Ca alloys as biodegradable implant materialsLu, Y., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Kainer, K.U., Hort, N. (2018)
In: Magnesium 2018, Proceedings of the 11th International Conference on Magnesium Alloys and Their Applications, Old Windsor (GB), 396-401. - conference paper: Old Windsor (GB)Tailoring of material properties of Mg-Gd alloys for biomedical applicationsHarmuth, J., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Roemer, R. (2018)
In: Magnesium 2018, Proceedings of the 11th International Conference on Magnesium Alloys and Their Applications, Old Windsor (GB), 376-381. - conference paper: Old Windsor (GB)Microstructural Changes of an Extruded WE33 Alloy during Precipitation HardeningMaier, P., Gavras, S., Freese, M., Schott, G., Hort, N. (2018)
In: Magnesium 2018, Proceedings of the 11th International Conference on Magnesium Alloys and Their Applications, Old Windsor (GB), 251-258. - conference lecture: Darmstadt (D)In-situ synchrotron investigation of the phases- and their morphology development in Mg-Nd-Zn allyosTolnai, D., Sosro, T., Gavras, S., Buzolin, R., Hort, N. (2018)
In: MSE 2018 - Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons, Darmstadt (D), - conference poster: Oxford (GB)Micro-alloying of Mg-Zn based alloys-Influence on corrosion behaviourJin, Y., Wiese, B., Feyerabend, F., Blawert, C., Bohlen, J., Willumeit-Roemer, R. (2018)
In: 10th Symposium on Biodegradable Metals for Biomedical Applications, BIOMETAL 2018, Oxford (GB), - conference object:Micro-alloying of Mg-Zn based alloys-Influence on corrosion behaviourJin, Y., Wiese, B., Feyerabend, F., Blawert, C., Bohlen, J., Willumeit-Roemer, R. (2018)
In: eCells and Materials - eCM Conferences, Vol. Collection6, 10. - conference paper: Teheran (IR)An Insight into Environment-Conscious (ECO) Magnesium: A ReviewRafiei, S., Habibollahzadeh, A., Wiese, B. (2018)
In: Proceedings of 7th International Conference on Materials Engineering and Metallurgy, IMAT 2018, Teheran (IR), IMES12_010. - journal article3D reconstruction of plasma electrolytic oxidation coatings on Mg alloy via synchrotron radiation tomographyLu, X., Blawert, C., Tolnai, D., Subroto, T., Kainer, K.U., Zhang, T., Wang, F., Zheludkevich, M.L. (2018)
In: Corrosion Science, Vol. 139, 395-402. - journal articleThe Effect of Solid Solute and Precipitate Phase on Young's Modulus of Binary Mg–RE AlloysXu,Y., Wang, L., Huang, M., Gensch, F., Kainer, K.U., Hort, N. (2018)
In: Advanced Engineering Materials, Vol. 20, 10, 1800271. - conference object:Suitability of as extruded Mg-Gd-0.5Mn for biomedical applicationsHarmuth, J., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Roemer, R. (2018)
In: eCells and Materials - eCM Conferences, Vol. Collection6, 2. - conference object: Oxford (GB)Suitability of as extruded Mg-Gd-0.5Mn for biomedical applicationsHarmuth, J., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Roemer, R. (2018)
In: Abstract Book of 10th Symposium on Biodegradable Metals for Biomedical Applications, BIOMETAL 2018, Oxford (GB), Met-2. - conference lecture: Oxford (GB)Suitability of as extruded Mg-Gd-0.5Mn for biomedical applicationsHarmuth, J., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Roemer, R. (2018)
In: 10th Symposium on Biodegradable Metals for Biomedical Applications, BIOMETAL 2018, Oxford (GB), - conference poster: Old Windsor (GB)Tailoring of material properties of Mg-Gd alloys for biomedical applicationsHarmuth, J., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Roemer, R. (2018)
In: 11th International Conference on Magnesium Alloys and Their Applications, Mg 2018, Old Windsor (GB), - journal articleEffects of Gd solutes on hardness and yield strength of Mg alloysXu, Y., Gensch, F., Ren, Z., Kainer, K.U., Hort, N. (2018)
In: Progress in Natural Science: Materials International, Vol. 28, 6, 724-730. - journal articleThe Effect of Surface Treatments on the Degradation of Biomedical Mg Alloys - A Review PaperGawlik, M.M., Wiese, B., Desharnais, V., Ebel, T., Willumeit-Roemer, R. (2018)
In: Materials, Vol. 11, 12, 2561. - journal articleHot forging of Mg-4Al-2Ba-2Ca (ABaX422) alloy and validation of processing mapSuresh, K., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Dieringa, H. (2018)
In: Transactions of Nonferrous Metals Society of China, Vol. 28, 8, 1495-1503. - journal articlePhase Formation during Solidification of Mg-Nd-Zn Alloys: An In Situ Synchrotron Radiation Diffraction StudyTolnai, D., Subroto, T., Gavras, S., Buzolin, R., Stark, A., Schell, N., Hort, N. (2018)
In: Materials, Vol. 11, 9, 1637. - conference poster: Teheran (IR)An Insight into Environment-Conscious (ECO) Magnesium: A ReviewRafiei, S., Habibollahzadeh, A., Wiese, B. (2018)
In: 7th International Conference on Materials Engineering and Metallurgy, iMat 2018, Teheran (IR), - conference object: Oxford (GB)Micro-alloying of Mg-Zn based alloys-Influence on corrosion behaviourJin, Y., Wiese, B., Feyerabend, F., Blawert, C., Bohlen, J., Willumeit-Roemer, R. (2018)
In: Abstract Book of 10th Symposium on Biodegradable Metals for Biomedical Applications, BIOMETAL 2018, Oxford (GB), Met-10. - conference lecture: Bremen (D)Precipitation Hardening on Mechanical and Corrosion Properties of Extruded Mg10Gd Modified with Nd and LaMaier, P., Bechly, M., Mendis, C.L., Hort, N. (2018)
In: 2nd International Conference on Light Materials, Science and Technology, LightMAT 2017, Bremen (D), - conference lecture: Old Windsor (GB)Microstructure, Mechanical and Creep Properties of Elektron21 Reinforced with AlN Nanoparticles by Intensive Melt ShearingYang, H., Huang, Y., Song, B., Kainer, K.U., Hort, N., Dieringa, H. (2018)
In: 11th International Conference on Magnesium Alloys and Their Applications, Mg 2018, Old Windsor (GB), - conference lecture: Old Windsor (GB)Microstructure, Mechanical and Creep Properties of Elektron21 Reinforced with AlN Nanoparticles by Intensive Melt ShearingYang, H., Huang, Y., Song, B., Kainer, K.U., Hort, N., Dieringa, H. (2018)
In: Magnesium 2018, Proceedings of the 11th International Conference on Magnesium Alloys and Their Applications, Old Windsor (GB), 128-135. - conference lecture: Old Windsor (GB)Effect of Nd Content on Tension-compression Yield Asymmetry of Mg–Nd AlloysXu, Y., Gan, W., Huang, Y., Kainer, K.U., Hort, N. (2018)
In: 11th International Conference on Magnesium Alloys and Their Applications, Mg 2018, Old Windsor (GB), - conference lecture: Old Windsor (GB)Effect of Nd Content on Tension-compression Yield Asymmetry of Mg–Nd AlloysXu, Y., Gan, W., Huang, Y., Kainer, K.U., Hort, N. (2018)
In: Magnesium 2018, Proceedings of the 11th International Conference on Magnesium Alloys and Their Applications, Old Windsor (GB), 147-153. - conference lecture (invited): Paris (F)Magnesium as biodegradable implant materials: how does the interface react to load?Willumeit-Roemer, R., Moosmann, J., Zeller-Plumhoff, B., Wieland, D.C.F., Krueger, D., Wiese, B., Wennerberg, A., Peruzzi, N., Galli, S., Beckmann, F., Hammel, J.U. (2018)
In: 10th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2018, Paris (F), - conference lecture (invited): Old Windsor (GB)From simple to very complex Mg implants: different processing routes for Ca containing Mg-alloysLetzig, D., Bohlen, J., Wiese, B., Wolff, M., Willumeit-Roemer, R. (2018)
In: 11th International Conference on Magnesium Alloys and Their Applications, Mg 2018, Old Windsor (GB), - journal articlePrecipitation Hardening on Mechanical and Corrosion Properties of Extruded Mg10Gd Modified with Nd and LaMaier, P., Bechly, M., Mendis, C.L., Hort, N. (2018)
In: Metals, Vol. 8, 8, 640. - journal articleEffect of TiBor on the grain refinement and hot tearing susceptibility of AZ91D magnesium alloyDavis, T.A., Bichler, L., D`Elia, F., Hort, N. (2018)
In: Journal of Alloys and Compounds, Vol. 759, 70-79.
2017
- journal articleMicrostructure and degradation performance of biodegradable Mg-Si-Sr implant alloysGil-Santos, A., Marco, I., Moelans, N., Hort, N., Biest, O.van der (2017)
In: Materials Science and Engineering C, Vol. 71, 25-34. - conference lecture: Bertinoro (I)Customizing the microstructure in three-dimensional Mg structuresMarek, R., Wohlfender, F., Wiese, B., de Wild, M. (2017)
In: 9th Symposium on Biodegradable Metals, Biometall 2017, Bertinoro (I), - journal articleCorrosion of Mg-9Al alloy with minor alloying elements (Mn, Nd, Ca, Y and Sn)Mingo, B., Arrabal, R., Mohedano, M., Mendis, C.L., del Olmo, R., Matykina, E., Hort, N., Merino, M.C., Pardo, A. (2017)
In: Materials and Design, Vol. 130, 48-58. - conference lecture (invited): Lund (S)The Role of Synchrotron and Neutron Methods in the Development of Mg Based AlloysKainer, K.U., Tolnai, D., Huang, Y., Buzolin, R., Hort, D. (2017)
In: Open Seminar Materials Engineering, Lund University, Lund (S), - journal articleInfluence of the microstructure and silver content on degradation, cytocompatibility and antibacterial properties of magnesium-silver alloys in vitroLiu, Z., Schade, R., Luthringer, B., Hort, N., Rothe, H., Mueller, S., Liefeith, K., Willumeit-Roemer, R., Feyerabend, F. (2017)
In: Oxidative Medicine and Cellular Longevity, 8091265. - conference poster: Weimar (D)The effect of HAc etching on the degradation behaviour of Mg-5GdGawlik, M.M., Steiner, M., Wiese, B., Dahms, M., Ebel, T., Willumeit-Roemer, R. (2017)
In: European Symposium and Exhibition on Biomaterials and Related Areas, EuroBioMat 2017, Weimar (D), - journal articleEvolution of twinning in extruded AZ31 alloy with bimodal grain structureGarces, G., Onorbe, E., gan, W., Mathis, K., Tolnai, D., Horvath, K., Perez, P., Adeva, P. (2017)
In: Materials Characterization, Vol. 126, 116-124. - conference lecture: Landshut (D)Magnesium Druckguss – Technologien, Legierungen und SchutzgaseHort, N., Dieringa, H. (2017)
In: Leichtbau grenzenlos, 8. Landshuter Leichtbau-Colloquium, Landshut (D), - journal articleThe Effects of HAc Etching on the Degradation Behavior of Mg-5GdGawlik, M.M., Steiner, M., Wiese, B., Gonzalez, J., Feyerabend, F., Dahms, M., Ebel, T., Willumeit-Roemer, R. (2017)
In: Journal of Medical Materials and Technologies, Vol. 1, 2, 22-25. - conference paper: San Diego, CA (USA)3D Microstructural Evolution on Solidifying Mg–5Nd–5Zn Alloy Observed via In Situ Synchrotron TomographySubroto, T., Mendis, C.L., D`Elia, F., Szakacs, G., Fife, J.L., Hort, N., Kainer, K.U., Tolnai, D. (2017)
In: Magnesium Technology 2017, 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), 605-612. - conference lecture: Old Windsor, (GB)A Combination of In Situ Synchrotron Diffraction and In Situ Synchrotron Tomography Techniques to Study the Solidification Behaviour of Mg-5Nd-5Zn AlloySosro, T., Gavras, S., Buzolin, R., Hort, N., Kainer, K.U., Tolnai, D. (2017)
In: 6th Decennial International Conference on Solidification Processing, Old Windsor, (GB), - journal articleHigh Temperature Deformation of Cast ZW11 Magnesium Alloy with Very Large Grain SizeRao, K.P., Bagheripoor, M., Dieringa, H., Hort, N. (2017)
In: Key Engineering Materials, Advances in Engineering Plasticity and its Application XIII, Vol. 725, 232-237. - conference lecture: San Diego, CA (USA)3D Microstructural Evolution on Solidifying Mg–5Nd–5Zn Alloy Observed via In Situ Synchrotron TomographySubroto, T., Mendis, C.L., D`Elia, F., Szakacs, G., Fife, J.L., Hort, N., Kainer, K.U., Tolnai, D. (2017)
In: 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), - conference paper: San Diego, CA (USA)Effects of Mn and Zn Solutes on Grain Refinement of Commercial Pure MagnesiumGu, J., Huang, Y., Zhang, M., Kainer, K.U., Hort, N. (2017)
In: Magnesium Technology 2017, 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), 191-198. - conference lecture: San Diego, CA (USA)Effects of Mn and Zn Solutes on Grain Refinement of Commercial Pure MagnesiumGu, J., Huang, Y., Zhang, M., Kainer, K.U., Hort, N. (2017)
In: 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), - journal articleInfluence of Dy in solid solution on the degradation behavior of binary Mg-Dy alloys in cell culture mediumYang, L., Ma, L., Huang, Y., Feyerabend, F., Blawert, C., Hoeche, D., Willumeit-Roemer, R., Zhang, E., Kainer, K.U., Hort, N. (2017)
In: Materials Science and Engineering C, Vol. 75, 1351-1358. - conference paper: San Diego, CA (USA)A Comparative Study on the Microstructure, Mechanical Properties, and Hot Deformation of Magnesium Alloys Containing Zinc, Calcium and YttriumRao, K.P., Suresh, K., Dieringa, H., Hort, N. (2017)
In: Magnesium Technology 2017, 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), 449-461. - conference lecture: San Diego, CA (USA)A Comparative Study on the Microstructure, Mechanical Properties, and Hot Deformation of Magnesium Alloys Containing Zinc, Calcium and YttriumRao, K.P., Suresh, K., Dieringa, H., Hort, N. (2017)
In: 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), - conference paper: San Diego, CA (USA)Corrosion and Creep Resistance of Thixomolded® Magnesium AlloysBuzolin, R., Dieringa, H., Blawert, C., Frank, H., Mendis, C.L., Lohmueller, A., Kainer, K.U., Hort, N. (2017)
In: Magnesium Technology 2017, 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), 381-389. - conference lecture: San Diego, CA (USA)Corrosion and Creep Resistance of Thixomolded® Magnesium AlloysBuzolin, R., Dieringa, H., Blawert, C., Frank, H., Mendis, C.L., Lohmueller, A., Kainer, K.U., Hort, N. (2017)
In: 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), - journal articleMicrostructure and mechanical characterization of cast Mg-Ca-Si alloysGil-Santos, A., Szakacs, G., Moelans, N., Hort, N., Biest, O.van der (2017)
In: Journal of Alloys and Compounds, Vol. 694, 767-776. - conference paper: San Diego, CA (USA)The Effect of Grain Refinement on Hot Tearing in AZ91D Magnesium AlloyDavies, T., Bichler, L., D´Elia, F., Hort, N. (2017)
In: Magnesium Technology 2017, 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), 653-660. - conference lecture: San Diego, CA (USA)The Effect of Grain Refinement on Hot Tearing in AZ91D Magnesium AlloyDavies, T., Bichler, L., D´Elia, F., Hort, N. (2017)
In: 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), - journal articleMicrohardness and In Vitro Corrosion of Heat-Treated Mg–Y–Ag Biodegradable AlloyVlcek, M., Lukac, F., Kudrnova, H., Smola, B., Stulikova, I., Luczak, M., Szakacs, G., Hort, N., Willumeit-Roemer, R. (2017)
In: Materials, Vol. 10, 1, 55. - conference paper: San Diego, CA (USA)Effect of the Zn Content on the Compression Behaviour of Mg5Nd(Zn): An In Situ Synchrotron Radiation Diffraction StudyTolnai, D., Kaercher, T., Buzolin, R., Sosro, T., Elia, F., Gavras, S., Stark, A., Schell, N., Hort, N., Kainer, K.U. (2017)
In: Magnesium Technology 2017, 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), 675-681. - conference lecture: San Diego, CA (USA)Effect of the Zn Content on the Compression Behaviour of Mg5Nd(Zn): An In Situ Synchrotron Radiation Diffraction StudyTolnai, D., Kaercher, T., Buzolin, R., Sosro, T., Elia, F., Gavras, S., Stark, A., Schell, N., Hort, N., Kainer, K.U. (2017)
In: 146th Annual Meeting and Exhibition, TMS 2017, San Diego, CA (USA), - conference object: Bertinoro (I)Customizing the microstructure in three-dimensional Mg structuresMarek, R., Wohlfender, F., Wiese, B., de Wild, M. (2017)
In: Abstract Book, 9th Symposium on Biodegradable Metals, Biometall 2017, Bertinoro (I), Met-4. - conference lecture: Kiel (D)The influence of surface treatments on the degradation behaviour of Mg-5GdGawlik, M.M., Wiese, B., Steiner, M., Lamaka, S., Dahms, M., Ebel, T., Willumeit-Roemer, R., Welle, A. (2017)
In: 3rd EURO Intelligent Materials 2017, Kiel (D), - conference paper: Old Windsor, (GB)A Combination of In Situ Synchrotron Diffraction and In Situ Synchrotron Tomography Techniques to Study the Solidification Behaviour of Mg-5Nd-5Zn AlloySosro, T., Gavras, S., Buzolin, R., Hort, N., Kainer, K.U., Tolnai, D. (2017)
In: Solidification Processing 2017: Proceedings of the 6th Decennial International Conference on Solidification Processing, Old Windsor, (GB), 230-234. - conference paper: San Diego, CA (USA)Biodegradable magnesium-based implants in bone studied by synchrotron radiation microtomographyMoosmann, J., Zeller-Plumhoff, B., Wieland, D.C.F., Galli, S., Krueger, D., Dose, T., Burmester, H., Wilde, F., Bech, M., Peruzzi, N., Wiese, B., Hipp, A., Beckmann, F., Hammel, J., Willumeit-Roemer, R. (2017)
In: Proceedings of SPIE, Developments in X-Ray Tomography XI, Vol. 10391, San Diego, CA (USA), 1039100. - conference lecture: Bremen (D)Microstructure and mechanical properties of as-cast and heat treated Mg-Ca-Y-Zr alloysYou, S., Huang, Y., Dieringa, H., Kainer, K.U., Hort, N. (2017)
In: 2nd International Conference on Light Materials, Science and Technology, LightMAT 2017, Bremen (D), - conference lecture: San Diego, CA (USA)Biodegradable magnesium-based implants in bone studied by synchrotron radiation microtomographyMoosmann, J., Zeller-Plumhoff, B., Wieland, D.C.F., Galli, S., Krueger, D., Dose, T., Burmester, H., Wilde, F., Bech, M., Peruzzi, N., Wiese, B., Hipp, A., Beckmann, F., Hammel, J., Willumeit-Roemer, R. (2017)
In: Developments in X-Ray Tomography XI, SPIE Optics and Photonics Conference 2017, San Diego, CA (USA), - conference paper:Microstructure and Residual Stress in Rotary Friction Welded Dissimilar Metals of AA7020 Aluminium Alloy with 316L SteelGan, W., Hofmann, M., Ventzke, V., Randau, C., Huang, Y., Kriele, A., Brokmeier, H.-G., Müller, M. (2017)
In: Materials Science Forum, Vol. 879, 572-577. - conference object: Bertinoro (I)Mg-Ag-Gd alloys as biodegradable implant materialsLu, Y., Zhidan, L., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Schade, R., Liefeit, K., Kainer, K.U., Hort, N. (2017)
In: Abstract Book, 9th Symposium on Biodegradable Metals, Biometall 2017, Bertinoro (I), Invit-13. - conference poster: Bertinoro (I)Mg-Ag-Gd alloys as biodegradable implant materialsLu, Y., Zhidan, L., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Schade, R., Liefeit, K., Kainer, K.U., Hort, N. (2017)
In: 9th Symposium on Biodegradable Metals, Biometall 2017, Bertinoro (I), - journal articleA new method of hybrid friction stir welding assisted by friction surfacing for joining dissimilar Ti/Al alloyHuang, Y., Lv, Z., Wan, L., Shen, J., dos Santos, J.F. (2017)
In: Materials Letters, Vol. 207, 172-175. - journal articleMechanism of Dynamic Recrystallization and Evolution of Texture in the Hot Working Domains of the Processing Map for Mg-4Al-2Ba-2Ca AlloySuresh, K., Rao, K.P., Prasad, Y.V.R.K., Wu, C.-M., Hort, N., Dieringa, H. (2017)
In: Metals, Vol. 7, 12, 539. - conference lecture: Bertinoro (I)Manufacturing and Assessment of high strength Mg-Nd-Gd-Zr-Zn alloy implant prototypes and test specimen, using PM (Powder Metallurgy) methodsWolff, M., Luczak, M., Schaper, J., Wiese, B., Dahms, M., Ebel, T., Willumeit-Roemer, R., Klassen, T. (2017)
In: 9th Symposium on Biodegradable Metals, Biometall 2017, Bertinoro (I), - conference lecture: Stralsund (D)The effect of yttrium addition on microstructure and mechanical properties of Mg-Ca alloysYou, S., Yuanding, H., Mendis, C., Kainer, K.U., Hort, N. (2017)
In: 23. International Symposium Research - Education - Technology, RET, Stralsund (D), - journal articleOptimization of Thermo-Mechanical Processing for Forging of Newly Developed Creep-Resistant Magnesium Alloy ABaX633Rao, K.P., Dharmendra, C., Prasad, Y.V.R.K., Hort, N., Dieringa, H. (2017)
In: Metals, Vol. 7, 11, 513. - conference object: Bertinoro (I)Manufacturing and Assessment of high strength Mg-Nd-Gd-Zr-Zn alloy implant prototypes and test specimen, using PM (Powder Metallurgy) methodsWolff, M., Luczak, M., Schaper, J., Wiese, B., Dahms, M., Ebel, T., Willumeit-Roemer, R., Klassen, T. (2017)
In: Abstract Book, 9th Symposium on Biodegradable Metals, Biometall 2017, Bertinoro (I), Met-8. - journal articleRecent research and developments on wrought magnesium alloysYou, S., Huang, Y., Kainer, K.U., Hort, N. (2017)
In: Journal of Magnesium and Alloys, Vol. 5, 3, 239-253. - conference paper:In Situ Tensile Texture Analysis of a New Mg-RE AlloyGan, W., Huang, Y., Xu, Y., Hofmann, M., Kainer, K., Hort, N. (2017)
In: Materials Science Forum, Vol. 879, 779-783. - conference lecture (invited): Madrid (E)Structure-property relations in Mg-Nd-Zn alloysTolnai, D., Gavras, S., Sosro, T., Buzolin, R., Hort, N. (2017)
In: Seminar of CSIC, CENIM, Madrid (E), - journal articleAs cast microstructures on the mechanical and corrosion behaviour of ZK40 modified with Gd and Nd additionsBuzolin, R.H., Mohedano, M., Mendis, C.L., Mingo, B., Tolnai, D., Blawert, C., Kainer, K.U., Pinto, H., Hort, N. (2017)
In: Materials Science and Engineering A, Vol. 682, 238-247. - conference object: Bertinoro (I)Influence of extrusion parameters on Mg-10GdHarmuth, J., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Roemer, R. (2017)
In: Abstract Book, 9th Symposium on Biodegradable Metals, Biometall 2017, Bertinoro (I), Met-5. - conference lecture (invited): Melbourne (AUS)Structure-property relations in Mg-Nd-Zn alloysTolnai, D., Gavras, S., Sosro, T., Buzolin, R., Hort, N. (2017)
In: Seminar of School of Engineering, RMIT, Melbourne (AUS), - conference poster: Bertinoro (I)Influence of extrusion parameters on Mg-10GdHarmuth, J., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Roemer, R. (2017)
In: 9th Symposium on Biodegradable Metals, Biometall 2017, Bertinoro (I), - journal articleEffects of extrusion ratio and annealing treatment on the mechanical properties and microstructure of a Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloyYu, Z., Huang, Y., Gan, W., Zhong, Z., Hort, N., Meng, J. (2017)
In: Journal of Materials Science, Vol. 52, 11, 6670-6686. - journal articleHigh Temperature Strength and Hot Working Technology for As-Cast Mg–1Zn–1Ca (ZX11) AlloyRao, K.P., Suresh, K., Prasad, Y.V.R.K., Dharmendra, C., Hort, N., Dieringa, H. (2017)
In: Metals, Vol. 7, 10, 405.
2016
- conference lecture: Nashville, TN (USA)Hot Tearing Susceptibility of Mg-5Nd-xZn AlloysD´Elia, F., Tolnai, D., Mendis, C.L., Hort, N. (2016)
In: 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), - conference lecture: Nashville, TN (USA)Hot Tearing Susceptibility of Mg-5Nd-xZn AlloysD´Elia, F., Tolnai, D., Mendis, C.L., Hort, N. (2016)
In: Magnesium Technology 2016, TMS 2016 Supplemental Proceedings, 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), 129-134. - conference lecture (invited): Singapore (SGP)Magnesium alloys - Smart Materials for Dual Use - Aerospace Applications and Degradable Metallic BiomaterialsKainer, K.U., Letzig, D., Hort, N. (2016)
In: 2nd Annual World Congress of Smart Material 2016, Singapore (SGP), - journal articleIntramedullary Mg2Ag nails augment callus formation during fracture healing in miceJaehn, K., Saito, H., Taipaleenmaeki, H., Gasser, A., Hort, N., Feyerabend, F., Schlueter, H., Rueger, J.M., Lehmann, W., Willumeit-Roemer, R., Hesse, E. (2016)
In: Acta Biomaterialia, Vol. 36, 350-360. - journal articleIn situ synchrotron radiation diffraction investigation of the compression behaviour at 350 °C of ZK40 alloys with addition of CaO and YBuzolin, R.H., Mendis, C.L., Tolnai, D., Stark, A., Schell, N., Pinto, H., Kainer, K.U., Hort, N. (2016)
In: Materials Science and Engineering A, Vol. 664, 2-9. - journal articleInfluence of Precipitation Hardening in Mg-Y-Nd on Mechanical and Corrosion PropertiesMaier, P., Peters, R., Mendis, C.L., Mueller, S., Hort, N. (2016)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 68, 4, 1183-1190. - conference poster: Interlaken (CH)Preliminary microstructural investigation of Mg cubes produced by SLMWohlfender, F., Saxer, S., Wiese, B., Rueegg, J., Dietschy, A., Schumacher, R., de Wild, M. (2016)
In: [MEET THE EXPERT] Implants, Innovation – from Idea to Patient Benefit, Interlaken (CH), - conference lecture: Nashville, TN (USA)In vitro corrosion and cytocompatibility of Mg-2Gd-x(Ag, Ca) alloysLu, Y., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Kainer, K.U., Hort, N. (2016)
In: Magnesium Technology 2016, TMS 2016 Supplemental Proceedings, 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), 347-351. - conference lecture: Nashville, TN (USA)In vitro corrosion and cytocompatibility of Mg-2Gd-x(Ag, Ca) alloysLu, Y., Huang, Y., Feyerabend, F., Willumeit, R., Kainer, K.U., Hort, N. (2016)
In: 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), - conference lecture: Venedig (I)Protecting molten Magnesium and its alloysHort, N., Wiese, B., Dieringa, H., Kainer, K.U. (2016)
In: High Tech Die Casting, HTDC 2016, Venedig (I), - journal articleProtecting molten Magnesium and its alloysHort, N., Wiese, B., Dieringa, H., Kainer, K.U. (2016)
In: Metallurgia Italiana, 6, 105-108. - conference lecture: Nashville, TN (USA)Role of SiC in Grain Refinement of Aluminum-Free Mg-Zn AlloysGu, J., Huang, Y., Kainer, K.U., Hort, N. (2016)
In: 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), - journal articleIdentification and description of intermetallic compounds in Mg–Si–Sr cast and heat-treated alloysGil-Santos, A., Moelans, N., Hort, N., Biest, O.van der (2016)
In: Journal of Alloys and Compounds, Vol. 669, 123-133. - conference lecture: Nashville, TN (USA)In Situ Synchrotron Radiation Diffraction of The Solidification of Mg-Dy(-Zr) AlloysTolnai, D., Staron, P., Staeck, A., Eckerlebe, H., Schell, N., Mueller, M., Groebner, J., Hort, N. (2016)
In: 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), - conference lecture: Nashville, TN (USA)As solidified microstructure investigation of Mg15Y and MgxYyGd (x+y=15 wt.%) ternary alloysSzakacs, G., Mendis, C., Tolnai, D., Vlcek, M., Lukac, F., Stulikova, I., Smola, B., Wolff, M., Schmidt-Fetzer, R., Schell, N., Kainer, K.U., Hort, N. (2016)
In: 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), - journal articleHot tearing characteristics of Mg–2Ca–xZn alloysSong, J., Wang, Z., Huang, Y., Srinivasan, A., Beckmann, F., Kainer, K.U., Hort, N. (2016)
In: Journal of Materials Science, Vol. 51, 5, 2687-2704. - journal articleAn in vivo study on the metabolism and osteogenic activity of bioabsorbable Mg–1Sr alloyTie, D., Guan, R., Liu, H., Cipriano, A., Liu, Y., Wang, Q., Huang, Y., Hort, N. (2016)
In: Acta Biomaterialia, Vol. 29, 455-467. - conference lecture: Montreal (CDN)Degradation morphology and pitting factor compared to degradation rateMaier, P., Gonzalez, J., Peters, R., Feyerabend, F., Ebel, T., Hort, N. (2016)
In: 8th Symposium on Biodegradable Metals for Biomedical Applications, Biometal 2016, Montreal (CDN), - conference lecture (invited): Chennai (IND)Mechanical property enhancement of magnesium alloys by reinforcing with nanoparticles: A reviewDieringa, H., Hort, N., Kainer, K.U. (2016)
In: International Conference and Expo on Magnesium, iMagCon 2016, Chennai (IND), - journal articlePlasma electrolytic oxidation coatings on Mg alloy with addition of SiO2 particlesLu, X., Blawert, C., Huang, Y., Ovri, H., Zheludkevich, M.L., Kainer, K.U. (2016)
In: Electrochimica Acta, Vol. 187, 20-33. - conference paper: Nashville, TN (USA)In Situ Synchrotron Radiation Diffraction of The Solidification of Mg-Dy(-Zr) AlloysTolnai, D., Staron, P., Staeck, A., Eckerlebe, H., Schell, N., Mueller, M., Groebner, J., Hort, N. (2016)
In: Magnesium Technology 2016, TMS 2016 Supplemental Proceedings, 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), 15-21. - journal articleMicrostructure evolution of Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloy during deformation and its effect on strengtheningYu, Z., Huang, Y., Gan, W., Mendis, C.L., Zhong, Z., Brokmeier, H.-G., Hort, N., Meng, J. (2016)
In: Materials Science and Engineering A, Vol. 657, 259-268. - conference paper: Nashville, TN (USA)As solidified microstructure investigation of Mg15Y and MgxYyGd (x+y=15 wt.%) ternary alloysSzakacs, G., Mendis, C., Tolnai, D., Vlcek, M., Lukac, F., Stulikova, I., Smola, B., Wolff, M., Schmidt-Fetzer, R., Schell, N., Kainer, K.U., Hort, N. (2016)
In: Magnesium Technology 2016, TMS 2016 Supplemental Proceedings, 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), 23-27. - conference paper: Nashville, TN (USA)Role of SiC in Grain Refinement of Aluminum-Free Mg-Zn AlloysGu, J., Huang, Y., Kainer, K.U., Hort, N. (2016)
In: Magnesium Technology 2016, TMS 2016 Supplemental Proceedings, 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), 177-181. - conference lecture: Nashville, TN (USA)Thermodynamic Description of Reactions between Mg and CaOSchmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, C.L., Tolnai, D., Kainer, K.U., Hort, N. (2016)
In: 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), - conference lecture: Nashville, TN (USA)Thermodynamic Description of Reactions between Mg and CaOSchmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, C.L., Tolnai, D., Kainer, K.U., Hort, N. (2016)
In: Magnesium Technology 2016, TMS 2016 Supplemental Proceedings, 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), 67-72. - conference lecture: Nashville, TN (USA)Solid solution strengthening in Mg-Gd alloysXu, Y., Ren, Z., Huang, Y., Kainer, K.U., Hort, N. (2016)
In: 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), - conference lecture: Nashville, TN (USA)Solid solution strengthening in Mg-Gd alloysXu, Y., Ren, Z., Huang, Y., Kainer, K.U., Hort, N. (2016)
In: Magnesium Technology 2016, TMS 2016 Supplemental Proceedings, 145th Annual Meeting and Exhibition, TMS 2016, Nashville, TN (USA), 135-139. - journal articleOn the microstructural factors affecting creep resistance of die-cast Mg–La-rare earth (Nd, Y or Gd) alloysGavras, S., Zhu, S.M., Nie, J.F., Gibson, M.A., Easton, M.A. (2016)
In: Materials Science and Engineering A, Vol. 675, 65-75. - journal articleCreep behavior of Mg–10Gd–xZn (x=2 and 6wt%) alloysSrinivasan, A., Dieringa, H., Mendis, C.L., Huang, Y., Rajesh Kumar, R., Kainer, K.U., Hort, N. (2016)
In: Materials Science and Engineering A, Vol. 649, 158-167. - conference lecture (invited): Budapest (H)Elevated temperature deformation behaviour of RE modified ZK40 alloysTolnai, D. (2016)
In: Seminar der Physik Institut der Eoetvoes Lorand Universitaet, Budapest (H), - conference paper: Chiang Mai (THA)High Temperature Deformation Behavior of a Newly Developed Mg Alloy Containing Al, Ba and CaRao, K.P., Lam, S.W., Hort, N., Dieringa, H. (2016)
In: Proceedings of 7th TSME International Conference on Mechanical Engineering, ICoME 2016, Chiang Mai (THA), 108-113. - journal articleForging of cast Mg-3Sn-2Ca-0.4Al-0.4Si magnesium alloy using processing mapRao, K.P., Suresh, K., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2016)
In: Journal of Mechanical Science and Technology, Vol. 30, 6, 2699-2705. - journal articleEvaluation of Magnesium Die-Casting Alloys for Elevated Temperature Applications: CastabilityEaston, M.A., Zhu, S., Abbott, T.B., Dargusch, M., Murray, M., Savage, G., Hort, N., Gibson, M.A. (2016)
In: Advanced Engineering Materials, Vol. 18, 6, 953-962. - conference object:Preliminary microstructural investigation of Mg cubes produced by SLMWohlfender, F., Saxer, S., Wiese, B., Rueegg, J., Dietschy, A., Schumacher, R., de Wild, M. (2016)
In: European Cells and Materials, Vol. 32, S1, 24. - doctoral thesis: Technische Universitaet Clausthal, FB Natur- und MaterialwissenschaftenThe Effect of CaO on Magnesium and Magnesium Calcium Alloys (Dissertation)Wiese, B. (2016)
- journal articleMicrostructural changes in an extruded Mg-Zn-Y alloy reinforced by quasicrystalline I-phase by small additions of calcium, manganese and cerium-rich mischmetalMedina, J., Perez, P., Garces, G., Tolnai, D., Stark, A., Schell, N., Adeva, P. (2016)
In: Materials Characterization, Vol. 118, 186-198. - conference object:Microstructure evolution and corrosion behaviour of the biodegradable EZK1110 alloySteinacker, A., Mendis, C.L., Mohedano, M., Feyerabend, F., Stekker, M., Maier, P., Kainer, K.U., Hort, N. (2016)
In: European Cells and Materials, Vol. 32, 6, 11. - conference lecture: Montreal (CDN)Microstructure evolution and corrosion behaviour of the biodegradable EZK1110 alloySteinacker, A., Mendis, C.L., Mohedano, M., Feyerabend, F., Stekker, M., Maier, P., Kainer, K.U., Hort, N. (2016)
In: 8th Symposium on Biodegradable Metals for Biomedical Applications, Biometal 2016, Montreal (CDN), - conference object:Degradation morphology and pitting factor compared to degradation rateMaier, P., Gonzalez, J., Peters, R., Feyerabend, F., Ebel, T., Hort, N. (2016)
In: European Cells and Materials, Vol. 32, S 6, 22. - journal articleIn vivo degradation of binary magnesium alloys – a long-term studyMyrissa, A., Martinalli, E., Szakacs, G., Berger, L., Eichler, J., Fischerauer, S.F., Kleinhans, C., Hort, N., Schaefer, U., Weinberg, A.M. (2016)
In: BioNanoMaterials, Vol. 17, 3-4, 121-130. - conference lecture: Darmstadt (D)Thermodynamic description of reactions between Mg and CaOSchmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, C., Tolnai, D., kainer, K.U., Hort, N. (2016)
In: Materials Science and Engineering, MSE 2016, Darmstadt (D), - lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IHort, N. (2016)
- lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IIHort, N. (2016)
- journal articleUnexpected formation of hydrides in heavy rare earth containing magnesium alloysHuang, Y., Yang, L., You, S., Gan, W., Kainer, K.U., Hort, N. (2016)
In: Journal of Magnesium and Alloys, Vol. 4, 3, 173-180. - journal articleFormation of an 18R long-period stacking ordered structure in rapidly solidified Mg88Y8Zn4 alloyGarces, G., Requena, G., Tolnai, D., Perez, P., Medina, J., Stark, A., Schell, N., Adeva, P. (2016)
In: Materials Characterization, Vol. 118, 514-518. - conference lecture: Chiang Mai (THA)High Temperature Deformation Behavior of a Newly Developed Mg Alloy Containing Al, Ba and CaRao, K.P., Lam, S.W., Hort, N., Dieringa, H. (2016)
In: 7th TSME International Conference on Mechanical Engineering, ICoME 2016, Chiang Mai (THA), - journal articleMaterial-flow behavior during friction-stir welding of 6082-T6 aluminum alloyHuang, Y., Wang, Y., Wan, L., Liu, H., Shen, J., dos Santos, J.F., Zhou, L., Feng, J. (2016)
In: The International Journal of Advanced Manufacturing Technology, Vol. 87, 1, 1115-1123. - conference paper: Kyoto (J)High Temperature Deformation Processing of Dilute Magnesium Alloy Z1 for Bioimplant ApplicationRao, K.P., Bagheripoor, M., Dieringa, H., Hort, N. (2016)
In: Proceedings of 9th Pacific Rim International Conference Advanced Materials and Processing, PRICM 9, Kyoto (J), 390-394. - conference lecture: Hiroshima (J)High Temperature Deformation of Cast ZW11 Magnesium Alloy with Very Large Grain SizeRao, K.P., Bagheripoor, M., Dieringa, H., Hort, N. (2016)
In: 13th Asia-Pacific Symposium on Engineering Plasticity and its Applications, AEPA 2016, Hiroshima (J), - conference lecture: Kyoto (J)High Temperature Deformation Processing of Dilute Magnesium Alloy Z1 for Bioimplant ApplicationRao, K.P., Bagheripoor, M., Dieringa, H., Hort, N. (2016)
In: 9th Pacific Rim International Conference Advanced Materials and Processing, PRICM 9, Kyoto (J), - journal articleCorrosion resistance of cerium-doped zinc calcium phosphate chemical conversion coatings on AZ31 magnesium alloyZeng, R., Hu, Y., Zhang, F., Huang, Y., Wang, Z., Li, S., Han, E. (2016)
In: Transactions of Nonferrous Metals Society of China, Vol. 26, 2, 472-483. - journal articleThe Role of Zn on the Elevated Temperature Compression Behavior of Mg5Nd: An In Situ Synchrotron Radiation Diffraction StudyTolnai, D., Buzolin, R.H., D`Elia, F., Subroto, T., Gavras, S., Stark, A., Schell, N., Kainer, K.U., Hort, N. (2016)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 68, 12, 3051-3056.
2015
- journal articleIn situ synchrotron radiation diffraction study of the role of Gd, Nd on the elevated temperature compression behavior of ZK40Buzolin,R.H., Tolnai, D., Mendis, C.L., Stark, A., Schell, N., Pinto, H., Kainer, K.U., Hort, N. (2015)
In: Materials Science and Engineering A, Vol. 640, 129-136. - journal articleHistological Comparison of New Biodegradable Magnesium-Based Implants for Maxillofacial ApplicationsCharyeva, O., Thormann, U., Lips, K.S., Heimann, L., Sommer, U., Szalay, G., Alt, V., Hort, N., Schnettler, R., Rauschmann, M., Schmidt, S. (2015)
In: Journal of Maxillofacial and Oral Surgery, Vol. 14, 3, 637-645. - conference paper: Port Elizabeth (ZA)Twin-roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiCDieringa, H., Das, S., Eskin, D., Fan, Z., Katsarou, L., Horstmann, M., Kurz, G., Mendis, C., Hort, N., Kainer, K.U. (2015)
In: Light Metals Technology 2015, 7th Internaternational Light Metals Technology Conference, LMT 2015, Port Elizabeth (ZA), 35-40. - conference paper: Port Elizabeth (ZA)Magnesium Melt ProtectionHort, N., Wiese, B., Dieringa, H., Kainer, K.U. (2015)
In: Light Metals Technology 2015, 7th Internaternational Light Metals Technology Conference, LMT 2015, Port Elizabeth (ZA), 78-81. - journal articleHigh temperature mechanical behavior of an extruded Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloyYu, Z., Huang, Y., Dieringa, H., Mendis, C.L., Guan, R., Hort, N., Meng, J. (2015)
In: Materials Science and Engineering A, Vol. 645, 213-224. - journal articleEffect of Zn addition on hot tearing behaviour of Mg–0.5Ca–xZn alloysSong, J., Wang, Z., Huang, Y., Srinivasan, A., Beckmann, F., Kainer, K.U., Hort, N. (2015)
In: Materials and Design, Vol. 87, 157-170. - conference lecture (invited): Warschau (PL)Magnesium Matrix Composites - Challenges and OpportunitiesKainer, K.U., Dieringa, H., Hort, N. (2015)
In: European Congress and Exhibition on Advanced Materials and Processes, EUROMAT 2015, Warschau (PL), - journal articleComparative study of microstructure and texture of cast and homogenized TX32 magnesium alloy after hot deformationDharmendra, C., Rao, K.P., Prasad, Y.V., R.K., Hort, N., Kainer, K.U. (2015)
In: Metals and Materials International, Vol. 21, 1, 134-146. - conference lecture: Carovigno (I)Phase Diagrams: Which information you can get from them for alloy and process design?Hort, N., Mendis, C., Maier, P. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - journal articleTwin-roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiCDieringa, H., Das, S., Eskin, D., Fan, Z., Katsarou, L., Horstmann, M., Kurz, G., Mendis, C., Hort, N., Kainer, K.U. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, 35-40. - conference object: Carovigno (I)Phase Diagrams: Which information you can get from them for alloy and process design?Hort, N., Mendis, C., Maier, P. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Met-18. - conference lecture: Carovigno (I)Microstructure of as-cast and T4 heat-treated Mg2Gd-x(Ag,Ca) ternary alloysLu, Y., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Kainer, K.U., Hort, N. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - conference object: Carovigno (I)Microstructure of as-cast and T4 heat-treated Mg2Gd-x(Ag,Ca) ternary alloysLu, Y., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Kainer, K.U., Hort, N. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Met-19. - conference lecture: Carovigno (I)In situ synchroton radiation diffraction during solidification of Mg4Y2Nd and Mg4Y2Ag1Nd alloysSzakacs, G., Mendis, C., Wiese, B., Stark, A., Kainer, K.U., Hort, N. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - conference object: Carovigno (I)In situ synchroton radiation diffraction during solidification of Mg4Y2Nd and Mg4Y2Ag1Nd alloysSzakacs, G., Mendis, C., Wiese, B., Stark, A., Kainer, K.U., Hort, N. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Met-22. - conference object:In situ synchroton radiation diffraction during solidification of Mg4Y2Nd and Mg4Y2Ag1Nd alloysSzakacs, G., Mendis, C., Wiese, B., Stark, A., Kainer, K.U., Hort, N. (2015)
In: European Cells and Materials, Vol. 30, S 3, 22. - conference object:Phase Diagrams: Which information you can get from them for alloy and process design?Hort, N., Mendis, C., Maier, P. (2015)
In: European Cells and Materials, Vol. 30, S 3, 18. - conference object:Microstructure of as-cast and T4 heat-treated Mg2Gd-x(Ag,Ca) ternary alloysLu, Y., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Kainer, K.U., Hort, N. (2015)
In: European Cells and Materials, Vol. 30, S 3, 19. - conference lecture: Carovigno (I)Can defects improve properties of metallic biomaterialsWiese, B., Mendis, C., Kainer, K.U., Hort, N. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - conference object: Carovigno (I)Can defects improve properties of metallic biomaterialsWiese, B., Mendis, C., Kainer, K.U., Hort, N. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Met-23. - journal articleCaO dissolution during melting and solidification of a Mg–10 wt.% CaO alloy detected with in situ synchrotron radiation diffractionWiese, B., Mendis, C.L., Tolnai, D., Stark, A., Schell, N., Reichel, H.-P., Brueckner, R., Kainer, K.U., Hort, N. (2015)
In: Journal of Alloys and Compounds, Vol. 618, 64-66. - journal articleThermal expansion behaviour of Long-Period Stacking Ordered (LPSO) phaseGarces, G., Requena, G., Tolnai, D., Perez, P., Adeva, P., Jimenez, J.A., Stark, A., Schell, N. (2015)
In: Revista de Metalurgia, Vol. 51, 2, e043. - conference lecture: Port Elizabeth (ZA)Twin-roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiCDieringa, H., Das, S., Eskin, D., Fan, Z., Katsarou, L., Horstmann, M., Kurz, G., Mendis, C., Hort, N., Kainer, K.U. (2015)
In: 7th Internaternational Light Metals Technology Conference, LMT 2015, Port Elizabeth (ZA), - conference lecture: Orlando, FL (USA)Investigation of Compression Behavior of Mg-4Zn-2(Nd,Gd)-0.5Zr at 350°C by In Situ Synchrotron Radiation DiffractionBuzolin,R.H., Tolnai, D., Mendis, C., Stark, A., Schell, N., Pinto, H., Kainer, K.U., Hort, N. (2015)
In: 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology, Orlando, FL (USA), - journal articleMechanical properties and corrosion behavior of Mg−Gd−Ca−Zr alloys for medical applicationsShi, L.-L., Huang, Y., Yang, L., Feyerabend, F., Mendis, C., Willumeit, R., Kainer, K.U., Hort, N. (2015)
In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 47, 38-48. - conference lecture: Orlando, FL (USA)In Situ Synchrotron Radiation Diffraction during Solidification of Mg15Gd: Effect of Cooling RateSzakacs, G., Mendis, C., Tolnai, D., Stark, A., Schell, N., Ovri, H., Wolff, M., Kainer, K.U., Groebner, J., Schmid-Fetzer, R., Hort, N. (2015)
In: 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology, Orlando, FL (USA), - conference paper: Orlando, FL (USA)In Situ Synchrotron Radiation Diffraction during Solidification of Mg15Gd: Effect of Cooling RateSzakacs, G., Mendis, C., Tolnai, D., Stark, A., Schell, N., Ovri, H., Wolff, M., Kainer, K.U., Groebner, J., Schmid-Fetzer, R., Hort, N. (2015)
In: Collected Proceedings, 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology 2015, Orlando, FL (USA), 79-84. - conference paper: Orlando, FL (USA)Powder Metallurgical Synthesis of Biodegradable Mg-Hydroxyapatite Composites for Biomedical ApplicationsStuepp, C.A., Szakacs, G., Mendis, C., Gensch, F., Mueller, S., Feyerabend, F., Hotza, D., Fredel, M.C., Hort, N. (2015)
In: Collected Proceedings, 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology 2015, Orlando, FL (USA), 425-429. - conference lecture: Orlando, FL (USA)Mechanical and Corrosive Properties of Two Magnesium Wires: Mg4Gd and Mg6AgMaier, P., Szakacs, G., Wala, M., Hort, N. (2015)
In: 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology, Orlando, FL (USA), - conference poster: Hamburg (D)In situ diffraction of CaO dissolution during melting and solidification of a Mg-20CaO alloyWiese, B., Tolnai, D., Mendis, C.L., Szakacs, G., Stark, A., Schell, N., Reichel, H.-P., Kainer, K.U., Hort, N. (2015)
In: DESY Photon Science Users´ Meeting 2015, Hamburg (D), - journal articleMicrostructural evolution and mechanical properties of Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr alloy prepared via pre-ageing and hot extrusionYu, Z., Huang, Y., Mendis, C.L., Hort, N., Meng, J. (2015)
In: Materials Science and Engineering A, Vol. 624, 23-31. - conference lecture: Orlando, FL (USA)Correlation between mechanical behaviour and microstructure in the Mg-Ca-Si-Sr system for degradable biomaterials based on thermodynamic calculationsGil-Santos, A., Szakacs, G., Moelans, N., Hort, N., Biest, O.van der (2015)
In: 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology, Orlando, FL (USA), - conference paper: Orlando, FL (USA)Correlation between mechanical behaviour and microstructure in the Mg-Ca-Si-Sr system for degradable biomaterials based on thermodynamic calculationsGil-Santos, A., Szakacs, G., Moelans, N., Hort, N., Biest, O. van der (2015)
In: Collected Proceedings, 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology 2015, Orlando, FL (USA), 431-436. - conference paper: Orlando, FL (USA)Investigation of Compression Behavior of Mg-4Zn-2(Nd,Gd)-0.5Zr at 350°C by In Situ Synchrotron Radiation DiffractionBuzolin,R.H., Tolnai, D., Mendis, C., Stark, A., Schell, N., Pinto, H., Kainer, K.U., Hort, N. (2015)
In: Collected Proceedings, 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology 2015, Orlando, FL (USA), 103-107. - journal articleMagnesium Melt ProtectionHort, N., Wiese, B., Dieringa, H., Kainer, K.U. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, 78-81. - conference lecture: Orlando, FL (USA)Microstructure and Properties of Magnesium Alloy Mg-1Zn-1Ca (ZX11)Katsarou, L., Suresh, K., Rao, K.P., Hort, N., Blawert, C., Mendis, C., Dieringa, H. (2015)
In: 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology, Orlando, FL (USA), - conference lecture: Carovigno (I)Challenges for accurate determination of rare earth elements in degradable Mg alloysVogt, C., Zimmermann, F., Hort, N. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - journal articleDeformation-induced dynamic precipitation during creep in magnesium-tin alloysHuang, Y., Dieringa, H., Kainer, K.U., Hort, N. (2015)
In: Key Engineering Materials, Advances in Fracture and Damage Mechanics XIII, Vol. 627, 365-368. - conference paper: Orlando, FL (USA)Microstructure and Properties of Magnesium Alloy Mg-1Zn-1Ca (ZX11)Katsarou, L., Suresh, K., Rao, K.P., Hort, N., Blawert, C., Mendis, C., Dieringa, H. (2015)
In: Collected Proceedings, 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology 2015, Orlando, FL (USA), 419-423. - journal articleAn Investigation on Hot Tearing of Mg-4.5Zn-(0.5Zr) Alloys with Y AdditionsWang, Z., Song, J., Huang, Y., Srinivasan, A., Liu, Z., Kainer, K.U., Hort, N. (2015)
In: Metallurgical and Materials Transactions A, Vol. 46, 5, 2108-2118. - journal articleFabrication of a high strength Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloy by thermomechanical treatmentsYu, Z., Huang, Y., Qiu, X., Wang, G., Meng, F., Hort, N., Meng, J. (2015)
In: Materials Science and Engineering A, Vol. 622, 121-130. - journal articlePlasticity analysis by synchrotron radiation in a Mg97Y2Zn1 alloy with bimodal grain structure and containing LPSO phaseGarces, G., Morris, D.G., Munoz-Morris, M.A., Perez, P., Tolnai, D., Mendis, C., Stark, A., Lim, H.K., kim, S., Shell, N., Adeva, P. (2015)
In: Acta Materialia, Vol. 94, 78-86. - journal articleIn Vitro Resorption of Magnesium Materials and its Effect on Surface and Surrounding EnvironmentCharyeva, O., Feyerabend, F., Willumeit, R., Zukowski, D., Gasqueres, C., Szakacs, G., Agha, N.A., Hort, N., Gensch, F., Cecchinato, F., Jimbo, R., Wennerberg, A., Lips, K.S. (2015)
In: MOJ Toxicology, Vol. 1, 1, 23-28. - conference lecture: Orlando, FL (USA)Powder Metallurgical Synthesis of Biodegradable Mg-Hydroxyapatite Composites for Biomedical ApplicationsStuepp, C.A., Szakacs, G., Mendis, C., Gensch, F., Mueller, S., Feyerabend, F., Hotza, D., Fredel, M.C., Hort, N. (2015)
In: 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology, Orlando, FL (USA), - conference lecture: Port Elizabeth (ZA)Magnesium Melt ProtectionHort, N., Wiese, B., Dieringa, H., Kainer, K.U. (2015)
In: 7th Internaternational Light Metals Technology Conference, LMT 2015, Port Elizabeth (ZA), - conference object:Can defects improve properties of metallic biomaterialsWiese, B., Mendis, C., Kainer, K.U., Hort, N. (2015)
In: European Cells and Materials, Vol. 30, S 3, 23. - conference paper: Orlando, FL (USA)Mechanical and Corrosive Properties of Two Magnesium Wires: Mg4Gd and Mg6AgMaier, P., Szakacs, G., Wala, M., Hort, N. (2015)
In: Collected Proceedings, 144th Annual Meeting & Exhibition, TMS 2015 - Magnesium Technology 2015, Orlando, FL (USA), 393-398. - conference object: Carovigno (I)Challenges for accurate determination of rare earth elements in degradable Mg alloysVogt, C., Zimmermann, F., Hort, N. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Cor-3. - conference paper: Jeju (ROK)Microstructure and Mechanical Properties of Mg-2Gd-x(Ag, Ca) Ternary Alloys Developed for Biomedical ApplicationsLu, Y., Huang, Y., Feyerabend, F., Willumeit, R., Kainer, K.U., Hort, N. (2015)
In: Proceedings of 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), 543-550. - conference lecture: Dresden (D)Koennen Legierungselemente Schutzgase in der Produktion von Magnesium ersetzen?Wiese, B., Kainer, K.U., Hort, N. (2015)
In: Werkstoffwoche 2015, Dresden (D), - journal articleSchutz von MagnesiumschmelzenWiese, B., Hort, N., Dieringa, H., Kainer, K.U. (2015)
In: Giesserei-Praxis : Fachzeitschrift fuer alle Bereiche der Giessereitechnik, Vol. 66, 12, 601-603. - journal articleHot Tearing Susceptibility of Mg-Ca Binary AlloysSong, J., Wang, Z., Huang, Y., Srinivasan, A., Beckmann, F., Kainer, K.U., Hort, N. (2015)
In: Metallurgical and Materials Transactions A, Vol. 46, 12, 6003-6017. - conference lecture: Jeju (ROK)Microstructural Response to Hot Working of Mg-4Al-2Ba-1Ca (ABaX421) as Revealed by Processing MapRao, K.P., Suresh, K., Prasad, Y.V.R.K., Hort, N., Dieringa, H. (2015)
In: 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), - conference paper: Jeju (ROK)Microstructural Response to Hot Working of Mg-4Al-2Ba-1Ca (ABaX421) as Revealed by Processing MapRao, K.P., Suresh, K., Prasad, Y.V.R.K., Hort, N., Dieringa, H. (2015)
In: Proceedings of 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), 97-104. - conference lecture: Jeju (ROK)In situ synchrotron radiation diffraction investigation on the deformation behaviour of ZKQX6000 and ZQX600 extruded alloysMendis, C.L., Hehenberger, M., Tolnai, D., Peyman, N., Stark, A., Schell, N., Kainer, K.U., Hort, N. (2015)
In: 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), - conference lecture: Port Elizabeth (ZA)Powder Metallurgical Synthesis of Biodegradable Mg-Hydroxyapatite Composites for Biomedical ApplicationsStuepp, C.A., Mendis, C.L., Mohedano, M., Szakacs, G., Gensch, F., Mueller, S., Feyerabend, F., Hortza, D., Fredel, M.C., Hort, N. (2015)
In: 7th Internaternational Light Metals Technology Conference, LMT 2015, Port Elizabeth (ZA), - conference paper: Port Elizabeth (ZA)Powder Metallurgical Synthesis of Biodegradable Mg-Hydroxyapatite Composites for Biomedical ApplicationsStuepp, C.A., Mendis, C.L., Mohedano, M., Szakacs, G., Gensch, F., Mueller, S., Feyerabend, F., Hortza, D., Fredel, M.C., Hort, N. (2015)
In: Light Metals Technology 2015, 7th Internaternational Light Metals Technology Conference, LMT 2015, Port Elizabeth (ZA), 165-171. - journal articlePowder Metallurgical Synthesis of Biodegradable Mg-Hydroxyapatite Composites for Biomedical ApplicationsStuepp, C.A., Mendis, C.L., Mohedano, M., Szakacs, G., Gensch, F., Mueller, S., Feyerabend, F., Hortza, D., Fredel, M.C., Hort, N. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, 165-171. - conference lecture: Jeju (ROK)Effect of Sn to Ca Ratio on the Processing Maps and Hot Deformation Mechanisms in Mg-Sn-Ca AlloysRao, K.P., Suresh, K., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2015)
In: Proceedings of 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), 604-612. - conference object: Carovigno (I)Heat treatment of Mg-Y- based alloys with addition of Ca or AgVlcek, M., Lukac, F., Stulikova, I., Smola, B., Kudrnova, H., Vlach, M., Kodetova, V., Szakacs, G., Hort, N. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Met-33. - conference lecture: Jeju (ROK)Role of CaO and Cover Gases on Protecting the Cast Surface of MgWiese, B., Mendis, C.L., Ovri, H., Reichel, H.-P., Lorenz, U., Kainer, K.U., Hort, N. (2015)
In: 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), - conference paper: Jeju (ROK)Role of CaO and Cover Gases on Protecting the Cast Surface of MgWiese, B., Mendis, C.L., Ovri, H., Reichel, H.-P., Lorenz, U., Kainer, K.U., Hort, N. (2015)
In: Proceedings of 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), 814-819. - conference lecture: Jeju (ROK)Role of post-heat treatment on hardness, bending strength and corrosion of Mg4Gd wire compared to pure Mg wireMaier, P., Peters, R., Szakacs, G., Hort, N. (2015)
In: 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), - conference paper: Jeju (ROK)Role of post-heat treatment on hardness, bending strength and corrosion of Mg4Gd wire compared to pure Mg wireMaier, P., Peters, R., Szakacs, G., Hort, N. (2015)
In: Proceedings of 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), 376-381. - lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IIHort, N. (2015)
- lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IHort, N. (2015)
- journal articleIn Situ Investigation of Microstructure Evolution during Solidification of Mg10CaxGd (x=5, 10, 20) AlloysMendis, C.L., Tolnai, D., Stark, A., Schell, N., Kainer, K.U., Hort, N. (2015)
In: Acta Physica Polonica A, Vol. 128, 6, 606-610. - conference lecture: Jeju (ROK)Microstructure and Mechanical Properties of Mg-2Gd-x(Ag, Ca) Ternary Alloys Developed for Biomedical ApplicationsLu, Y., Huang, Y., Feyerabend, F., Willumeit, R., Kainer, K.U., Hort, N. (2015)
In: 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), - conference object:Challenges for accurate determination of rare earth elements in degradable Mg alloysVogt, C., Zimmermann, F., Hort, N. (2015)
In: European Cells and Materials, Vol. 30, S 3, 41. - conference object:Heat treatment of Mg-Y- based alloys with addition of Ca or AgVlcek, M., Lukac, F., Stulikova, I., Smola, B., Kudrnova, H., Vlach, M., Kodetova, V., Szakacs, G., Hort, N. (2015)
In: European Cells and Materials, Vol. 30, S 3, 33. - conference lecture: Jeju (ROK)Effect of Sn to Ca Ratio on the Processing Maps and Hot Deformation Mechanisms in Mg-Sn-Ca AlloysRao, K.P., Suresh, K., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2015)
In: 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), - conference lecture: Carovigno (I)Heat treatment of Mg-Y- based alloys with addition of Ca or AgVlcek, M., Lukac, F., Stulikova, I., Smola, B., Kudrnova, H., Vlach, M., Kodetova, V., Szakacs, G., Hort, N. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - conference poster: Carovigno (I)Effect of composition on the microstructure and properties of Mg-Si-Sr alloys for resorable material applicationsGil-Santos, A., Szakacs, G., Marco, I., Moelans, N., Hort, N., Biest, O.van der (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - conference object:Precipitation hardening on hardness, grain size and corrosion of WE32Peters, R., Maier, P., Mendis, C., Hort, N. (2015)
In: European Cells and Materials, Vol. 30, S 3, 56. - journal articleTwinning Assisted Crack Propagation of Magnesium-Rare Earth Casting and Wrought Alloys under BendingMaier, P., Mendis, C., Wolff, M., Mueller, S., Hort, N. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, 311-317. - conference lecture: Carovigno (I)Tensile and microstructural properties of annealed Mg10Gd-alloy wiresBartosch, M., Peters, H., Schmitt, B., Berger, F., Hort, N., Witte, F. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - conference object: Carovigno (I)Tensile and microstructural properties of annealed Mg10Gd-alloy wiresBartosch, M., Peters, H., Schmitt, B., Berger, F., Hort, N., Witte, F. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Met-31. - conference object:Tensile and microstructural properties of annealed Mg10Gd-alloy wiresBartosch, M., Peters, H., Schmitt, B., Berger, F., Hort, N., Witte, F. (2015)
In: European Cells and Materials, Vol. 30, S 3, 30. - journal articleEffect of erbium modification on the microstructure, mechanical and corrosion characteristics of binary Mg–Al alloysSeetharaman, S., Blawert, C., Ng, B.M., Wong, W.L.E., Goh, C.S., Hort, N., Gupta, M. (2015)
In: Journal of Alloys and Compounds, Vol. 648, 759-770. - conference lecture: Jeju (ROK)Influences of Ca Addition on the Hot Tearing Behaviour of Mg-4Zn-xCa AlloysSong, J., Wang, Z., Huang, Y., Kainer, K.U., Hort, N. (2015)
In: 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), - conference object: Carovigno (I)Precipitation hardening on hardness, grain size and corrosion of WE32Peters, R., Maier, P., Mendis, C., Hort, N. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Cor-18. - conference lecture: Carovigno (I)Resorption of magnesium materials and its effect on human mesenchymal stem cells in vitroCharyeva, O., Feyerabend, F., Willumeit, R., Szakacs, G., Cecchinato, F., Agha, N.A., Hort, N., Wennerberg, A., Dakischew, O., Heiss, C., Schnettler, R., Lips, K.S. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - conference object: Carovigno (I)Resorption of magnesium materials and its effect on human mesenchymal stem cells in vitroCharyeva, O., Feyerabend, F., Willumeit, R., Szakacs, G., Cecchinato, F., Agha, N.A., Hort, N., Wennerberg, A., Dakischew, O., Heiss, C., Schnettler, R., Lips, K.S. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Vit-6. - conference object:Resorption of magnesium materials and its effect on human mesenchymal stem cells in vitroCharyeva, O., Feyerabend, F., Willumeit, R., Szakacs, G., Cecchinato, F., Agha, N.A., Hort, N., Wennerberg, A., Dakischew, O., Heiss, C., Schnettler, R., Lips, K.S. (2015)
In: European Cells and Materials, Vol. 30, S 3, 70. - conference paper: Jeju (ROK)Influences of Ca Addition on the Hot Tearing Behaviour of Mg-4Zn-xCa AlloysSong, J., Wang, Z., Huang, Y., Kainer, K.U., Hort, N. (2015)
In: Proceedings of 10th International Conference on Magnesium Alloys and Their Applications, Mg 2015, Jeju (ROK), 825-834. - conference lecture: Carovigno (I)Effect of composition on the microstructure and properties of Mg-Si-Sr alloys for resorable material applicationsGil-Santos, A., Szakacs, G., Marco, I., Moelans, N., Hort, N., Biest, O.van der (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Met-26. - conference lecture: Port Elizabeth (ZA)Twinning Assisted Crack Propagation of Magnesium-Rare Earth Casting and Wrought Alloys under BendingMaier, P., Mendis, C., Wolff, M., Mueller, S., Hort, N. (2015)
In: 7th Internaternational Light Metals Technology Conference, LMT 2015, Port Elizabeth (ZA), - conference poster: Carovigno (I)Cytotoxicity and antibacterial property of Mg-Ag alloysLiu, Z., Willumeit-Roemer, R., Hort, N., Schade, R., Feyerabend, F. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - conference lecture: Carovigno (I)Cytotoxicity and antibacterial property of Mg-Ag alloysLiu, Z., Willumeit-Roemer, R., Hort, N., Schade, R., Feyerabend, F. (2015)
In: Abstract Book, 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), Vit-1. - conference lecture: Carovigno (I)Precipitation hardening on hardness, grain size and corrosion of WE32Peters, R., Maier, P., Mendis, C., Hort, N. (2015)
In: 7th BIOMETAL, Symposium on Biodegradable Metals for Biomedical Applications, Carovigno (I), - conference object:Cytotoxicity and antibacterial property of Mg-Ag alloysLiu, Z., Willumeit-Roemer, R., Hort, N., Schade, R., Feyerabend, F. (2015)
In: European Cells and Materials, Vol. 30, S 3, 65. - conference paper: Port Elizabeth (ZA)Twinning Assisted Crack Propagation of Magnesium-Rare Earth Casting and Wrought Alloys under BendingMaier, P., Mendis, C., Wolff, M., Mueller, S., Hort, N. (2015)
In: Light Metals Technology 2015, 7th Internaternational Light Metals Technology Conference, LMT 2015, Port Elizabeth (ZA), - conference object:Effect of composition on the microstructure and properties of Mg-Si-Sr alloys for resorable material applicationsGil-Santos, A., Szakacs, G., Marco, I., Moelans, N., Hort, N., Biest, O.van der (2015)
In: European Cells and Materials, Vol. 30, S 3, 26.
2014
- journal articleMicrostructures and mechanical properties of pure Mg processed by rotary swagingGan, W.M., Huang, Y.D., Wang, R., Wang, G.F., Srinivasan, A., Brokmeier, H.-G., Schell, N., Kainer, K.U., Hort, N. (2014)
In: Materials and Design, Vol. 63, 83-88. - conference lecture: St. Julians (M)Magnesium Matrix Composites for Transportation IndustriesKainer, K.U., Dieringa, H., Hort, N. (2014)
In: 22nd Annual International Conference on Composites/Nanoengineering, ICCE 22, St. Julians (M), - journal articleHot tearing mechanisms of B206 aluminum–copper alloyD´Elia, F., Ravindran, C., Sediako, D., Kainer, K.U., Hort, N. (2014)
In: Materials and Design, Vol. 64, 44-55. - journal articleIn vitro mechanical and corrosion properties of biodegradable Mg–Ag alloysTie, D., Feyerabend, F., Hort, N., Hoeche, D., kainer, K.U., Willumeit, R., Mueller, W.D. (2014)
In: Materials and Corrosion, Vol. 65, 6, 569-576. - journal articleEffect of aluminum on microstructural evolution during hot deformation of TX32 magnesium alloyDharmendra, C., Rao, K.P., Zhao, F., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2014)
In: Journal of Materials Science, Vol. 49, 17, 5885-5898. - journal articleMicrostructure and Compression Creep Strength of the Newly Developed Magnesium Alloy DieMag422Dieringa, H., Hort, N., Kainer, K.U. (2014)
In: Advanced Materials Research, AMI Light Metals Conference 2014, Vol. 1019, 177-183. - conference paper: Las Vegas, CA (USA)Hot forging of cast magnesium alloy TX31 using semi-closed die and its finite element simulationRao, K.P., Suresh, K., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2014)
In: Proceedings of International Conference on Processing and Manufacturing of Advanced Materials, Thermec 2013, Las Vegas, CA (USA), 449-454. - journal articleMeasurement and calculation of the viscosity of metals - A review of the current status and developing trendsCheng, J., Groebner, J., Hort, N., Kainer, K.U., Schmid-Fetzer, R. (2014)
In: Measurement Science and Technology, Vol. 25, 6, 062001. - conference paper: Las Vegas, CA (USA)Influence of Nd in extruded Mg10Gd base alloys on fatigue strengthMaier, P., Tober, G., Mendis, C.L., Mueller, S., Hort, N. (2014)
In: Proceedings of International Conference on Processing and Manufacturing of Advanced Materials, Thermec 2013, Las Vegas, CA (USA), 419-424. - conference lecture (invited): Kwa Maritane Bush Lodge (ZA)Microstructure and Compression Creep Strength of the Newly Developed Magnesium Alloy DieMag422Dieringa, H., Hort, N., Kainer, K.U. (2014)
In: Light Metals Conference 2014, Kwa Maritane Bush Lodge (ZA), - book partImagerie 3D en mecanique des materiauxRequena, G., Tolnai, D., Asghar, Z., Degischer, H.-P., Koch, T., Soldera, F., Mueklich, F. (2014)
In: Imagerie 3D en mecanique des materiaux, 53-83. - conference lecture (invited): Shenyang (VRC)Applications of Magnesium AlloysHort, N., Huang, Y. (2014)
In: Seminar of the North Eastern University, Shenyang (VRC), - conference lecture (invited): Taizhou (VRC)Degradable Mg implant materialsHort, N., Huang, Y. (2014)
In: Seminar of the Taizhou Enze Medical Centre, Taizhou (VRC), - conference lecture (invited): Ningbo (VRC)State of the Art of Cast Magnesium AlloysHort, N., Huang, Y. (2014)
In: 2014 China International Forum on Advanced Materials and Commercialization, Ningbo (VRC), - journal articleInfluence of rare-earth addition on the long-period stacking ordered phase in cast Mg–Y–Zn alloysGarcers, G., Requena, G., Tolnai, D., Perez, P., Adeva, P., Stark, A., Schell, N. (2014)
In: Journal of Materials Science, Vol. 49, 7, 2714-2722. - conference paper: San Diego, CA (USA)Crack Propagation under Bending in Cast Mg10GdxNd-T4 AlloysMaier, P., Mendis, C.L., Wolff, M., Hort, N. (2014)
In: Magnesium Technology 2014, Proceedings of 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), 77-82. - journal articleRole of multi-microalloying by rare earth elements in ductilization of magnesium alloysHuang, Y., Gan, W., Kainer, K.U., Hort, N. (2014)
In: Journal of Magnesium and Alloys, Vol. 2, 1, 1-7. - conference paper: San Diego, CA (USA)Low Cycle Fatigue Properties of Extruded Mg10GdxNd AlloysTober, G., Maier, P., Mueller, S., Hort, N. (2014)
In: Magnesium Technology 2014, Proceedings of 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), 115-120. - journal articleInvestigations on microstructures, mechanical and corrosion properties of Mg-Gd-Zn alloysSrinivasan, A., Huang, Y., Mendis, C.L., Blawert, C., Kainer, K.U., Hort, N. (2014)
In: Materials Science and Engineering A, Vol. 595, 224-234. - conference paper: Singapore (SGP)Precipitate formation during creep of Mg10Gd(2-6)Zn alloysMendis, C.L., Srinivasan, A., Huang, Y., Hort, N., Kainer, K.U. (2014)
In: Proceedings of 22nd International Conference on Processing and Fabrication of Advanced Materials, PFAM XXII, Singapore (SGP), 120-127. - conference lecture: San Diego, CA (USA)In Situ Synchrotron Radiation Diffraction during Melting and Solidification of Mg-Al Alloys Containing CaOWiese, B., Mendis, C.L., Tolnai, D., Szakacs, G., Stark, A., Schell, N., Reichel, H.-P., Brueckner, R., Hort, N., Kainer, K.U. (2014)
In: 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), - conference paper: San Diego, CA (USA)In Situ Synchrotron Radiation Diffraction during Melting and Solidification of Mg-Al Alloys Containing CaOWiese, B., Mendis, C.L., Tolnai, D., Szakacs, G., Stark, A., Schell, N., Reichel, H.-P., Brueckner, R., Hort, N., Kainer, K.U. (2014)
In: Magnesium Technology 2014, Proceedings of 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), 191-195. - conference lecture: San Diego, CA (USA)Spike-Forging of As-Cast TX32 Magnesium AlloyRao, K.P., Suresh, K., Hort, N., Kainer, K.U. (2014)
In: 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), - conference paper: San Diego, CA (USA)Spike-Forging of As-Cast TX32 Magnesium AlloyRao, K.P., Suresh, K., Hort, N., Kainer, K.U. (2014)
In: Magnesium Technology 2014, Proceedings of 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), 275-279. - conference lecture: San Diego, CA (USA)Low Cycle Fatigue Properties of Extruded Mg10GdxNd AlloysTober, G., Maier, P., Mueller, S., Hort, N. (2014)
In: 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), - conference lecture: San Diego, CA (USA)Crack Propagation under Bending in Cast Mg10GdxNd-T4 AlloysMaier, P., Mendis, C.L., Wolff, M., Hort, N. (2014)
In: 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), - conference lecture:Hot forging of cast magnesium alloy TX31 using semi-closed die and its finite element simulationRao, K.P., Suresh, K., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2014)
In: Materials Science Forum, Thermec 2013, Vol. 783-786, 449-454. - journal articleExperimental and numerical analysis of hot tearing susceptibility for Mg–Y alloysWang, Z., Huang, Y., Srinivasan, A., Liu, Z., Beckmann, F., Kainer, K.U., Hort, N. (2014)
In: Journal of Materials Science, Vol. 49, 353-362. - conference lecture: Bielefeld (D)Magnesium – Stand der Technik und PotentialHort, N. (2014)
In: 12. Bielefelder Werkstofftag, Bielefeld (D), - journal articleA Study on the Hot Deformation Behavior of Cast Mg-4Sn-2Ca (TX42) AlloySuresh, K., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2014)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 66, 2, 322-328. - conference lecture:Influence of Nd in extruded Mg10Gd base alloys on fatigue strengthMaier, P., Tober, G., Mendis, C.L., Mueller, S., Hort, N. (2014)
In: Materials Science Forum, Thermec 2013, Vol. 783-786, 419-424. - journal articleThe interaction of precipitation and deformation in a binary Mg–Ca alloy at elevated temperaturesLalpoor, M., Miroux, A., Mendis, C.L., Hort, N., Offerman, S.E. (2014)
In: Materials Science and Engineering A, Vol. 609, 116-124. - lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IHort, N. (2014)
- journal articleEffect of silicon content on hot working, processing maps, and microstructural evolution of cast TX32–0.4Al magnesium alloyDharmendra, C., Rao, K.P., Zhao, F., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2014)
In: Materials Science and Engineering A, Vol. 606, 11-23. - book partAdvances in manufacturing processes for magnesium alloysDieringa, H., Hort, N., Bohlen, J., Letzig, D., Kainer, K.U. (2014)
In: Essential Readings in Magnesium Technology, 19-24. - conference lecture: Maratea (I)In situ synchrotron radiation diffraction during solidification of Mg15GdSzakacs, G., Mendis, C.L., Wiese, B., Tolnai, D., Stark, A., Schell, N., Kainer, K.U., Hort, N. (2014)
In: 6th Symposium on Biodegradable Metals, Maratea (I), - conference lecture: Maratea (I)Influence of corrosion on mechanical properties of Mg5Gd wireMaier, P., Erdmann, R., Tesch, R., Szakacs, G., Hort, N. (2014)
In: 6th Symposium on Biodegradable Metals, Maratea (I), - conference lecture: San Diego, CA (USA)In situ synchrotron radiation diffraction during solidification of Mg4Y and Mg4YxGd alloys (x - 1, 4 wt.%)Szakacs, G., Wiese, B., Mendis, C.L., Tolnai, D., Stark, A., Schell, N., Nair, M., Kainer, K.U., Hort, N. (2014)
In: 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), - conference poster: Kwa Maritane Bush Lodge (ZA)Mechanical Properties and Microstructures of Nano SiC Reinforced ZE10 Composites Prepared with Ultrasonic VibrationSong, J., Dieringa, H., Huang, Y., Gan, W., Kainer, K.U., Hort, N. (2014)
In: Light Metals Conference 2014, Kwa Maritane Bush Lodge (ZA), - journal articleMechanical Properties and Microstructures of Nano SiC Reinforced ZE10 Composites Prepared with Ultrasonic VibrationSong, J., Dieringa, H., Huang, Y., Gan, W., Kainer, K.U., Hort, N. (2014)
In: Advanced Materials Research, AMI Light Metals Conference 2014, Vol. 1019, 169-176. - conference lecture: Troyes (F)Residual stresses of the as-cast Mg-xCa alloys with hot sprues by neutron diffractionSong, J., Huang, Y., Kainer, K.U., Gan, W., Hort, N. (2014)
In: 9th European Conference on Residual Stresses, ECRS 9, Troyes (F), - journal articleResidual Stresses of the As-Cast Mg-xCa Alloys with Hot Sprues by Neutron DiffractionSong, J., Huang, Y., Kainer, K.U., Gan, W., Hort, N. (2014)
In: Advanced Materials Research, Residual Stresses IX, Vol. 996, 592-597. - journal articleUnderstanding effects of microstructural inhomogeneity on creep response – New approaches to improve the creep resistance in magnesium alloysHuang, Y., Dieringa, H., Kainer, K.U., Hort, N. (2014)
In: Journal of Magnesium and Alloys, Vol. 2, 2, 124-132. - conference lecture: Prag (CZ)In Situ Investigation of Microstructure Evolution during Solidification of Mg10CaxGd (x=5, 10, 20) AlloysMendis, C.L., Tolnai, D., Stark, A., Schell, N., Kainer, K.U., Hort, N. (2014)
In: 13th International Symposium on Physics of Materials, ISPMA13, Prag (CZ), - conference paper: San Diego, CA (USA)In situ synchrotron radiation diffraction during solidification of Mg4Y and Mg4YxGd alloys (x - 1, 4 wt.%)Szakacs, G., Wiese, B., Mendis, C.L., Tolnai, D., Stark, A., Schell, N., Nair, M., Kainer, K.U., Hort, N. (2014)
In: Magnesium Technology 2014, Proceedings of 143rd Annual Meeting & Exhibition, TMS 2014, San Diego, CA (USA), 213-218. - conference poster: Lausanne (CH)Properties of binary Mg-(Gd, Ag, Ca) alloys developed for biomedical applicationsLu, Y., Huang, Y., Feyerabend, F., Willumeit, R., Kainer, K.U., Hort, N. (2014)
In: Junior Euromat 2014, Lausanne (CH), - conference object:Influence of corrosion on mechanical properties of Mg5Gd wireMaier, P., Erdmann, R., Tesch, R., Szakacs, G., Hort, N. (2014)
In: European Cells and Materials, Vol. 28, S3, 36. - conference paper: Brno (CZ)Magnesium Alloy Containing Silver for Degradable Biomedical ImplantsLukac, F., Vlcek, M., Stulikova, I., Smola, B., Kudrnova, H., Vlach, M., Kekule, T., Szakacs, G., Hort, N., Kainer, K.U. (2014)
In: Conference Proceedings, 23rd International Conference on Metallurgy and Materials, METAL 2014, Brno (CZ), 1086-1091. - conference lecture: Brno (CZ)Precipitation Processes in Mg-Y-Nd-Ag Alloys Suitable for Biodegradable ImplantsVlcek, M., Lukac, F., Stulikova, I., Smola, B., Kudrnova, H., Vlach, M., Kodetova, V., Szakacs, G., Hort, N., Kainer, K.U. (2014)
In: 23rd International Conference on Metallurgy and Materials, METAL 2014, Brno (CZ), - conference paper: Brno (CZ)Precipitation Processes in Mg-Y-Nd-Ag Alloys Suitable for Biodegradable ImplantsVlcek, M., Lukac, F., Stulikova, I., Smola, B., Kudrnova, H., Vlach, M., Kodetova, V., Szakacs, G., Hort, N., Kainer, K.U. (2014)
In: Conference Proceedings, 23rd International Conference on Metallurgy and Materials, METAL 2014, Brno (CZ), 1103-1108. - lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IIHort, N. (2014)
- conference lecture: St. Julians (M)Magnesium Matrix Composites for Transportation IndustriesKainer, K.U., Dieringa, H., Hort, N. (2014)
In: Proceedings of 22nd Annual International Conference on Composites/Nanoengineering, ICCE 22, St. Julians (M), 429-430. - journal articleResidual Stresses in the Hot Sprues of as-cast Mg-Zn Alloys Investigated by STRESS-SPEC Neutron DiffractometerGan, W.M., Huang, Y.D., Wang, Z., Hort, N., Hofmann, M. (2014)
In: Materials Science Forum, International Conference on Residual Stresses 9, Vol. 768-789, 428-432. - conference poster: Lausanne (CH)Influence of Zn addition on hot tearing behaviour of Mg-0.5Ca-xZn alloysSong, J., Wang, Z., Huang, Y., Kainer, K.U., Hort, N. (2014)
In: Junior Euromat 2014, Lausanne (CH), - conference lecture: Brno (CZ)Magnesium Alloy Containing Silver for Degradable Biomedical ImplantsLukac, F., Vlcek, M., Stulikova, I., Smola, B., Kudrnova, H., Vlach, M., Kekule, T., Szakacs, G., Hort, N., Kainer, K.U. (2014)
In: 23rd International Conference on Metallurgy and Materials, METAL 2014, Brno (CZ), - journal articleVoid formation in metal matrix composites by solidification and shrinkage of an AlSi7 matrix between densely packed particlesSchoebel, M., Requena, G., Fiedler, G., Tolnai, D., Vaucher, S., Degischer, H.P. (2014)
In: Composites / A, Vol. 66, 103-108. - conference object:In situ synchrotron radiation diffraction during solidification of Mg15GdSzakacs, G., Mendis, C.L., Wiese, B., Tolnai, D., Stark, A., Schell, N., Kainer, K.U., Hort, N. (2014)
In: European Cells and Materials, Vol. 28, S3, 3. - conference object:Stiffness of metals, alloys and componentsHort, N., Wiese, B., Wolff, M., Ebel, T., Maier, P. (2014)
In: European Cells and Materials, Vol. 28, S3, 1. - journal articleCorrosion behavior of Mg–Gd–Zn based alloys in aqueous NaCl solutionSrinivasan, A., Blawert, C., Huang, Y., Mendis, C.L., Kainer, K.U., Hort, N. (2014)
In: Journal of Magnesium and Alloys, Vol. 2, 3, 245-256. - conference lecture: Vancouver (CDN)In situ synchrotron radiation diffraction during compression of a zkqx alloyTolnai, D., Hehenberger, M., Mendis, C.L., Stark, A., Schell, N., Hort, N., Kainer, K.U. (2014)
In: 53rd Annual Conference of Metallurgists, COM 2014, Vancouver (CDN), - conference paper: Vancouver (CDN)In situ synchrotron radiation diffraction during compression of a zkqx alloyTolnai, D., Hehenberger, M., Mendis, C.L., Stark, A., Schell, N., Hort, N., Kainer, K.U. (2014)
In: Proceedings of the Conference of Metallurgists, 53rd Annual Conference of Metallurgists, COM 2014, Vancouver (CDN), - conference object:Thermodynamic calculation and experimental studies of phase relations in the Mg-Si-Ca-Sr system for degradable biomaterialsGil-Santos, A., Szakacs, G., Hort, N., Biest, O.van der (2014)
In: European Cells and Materials, Vol. 28, S3, 35. - conference lecture: Sao Paulo (BR)In situ synchrotron radiation diffraction of the solidification of Mg-Y-Nd alloysTolnai, D., Mendis, C.L, Stark, A., Schell, N., Hort, N. (2014)
In: Pan American Materials Conference 2014, Sao Paulo (BR), - conference lecture: Maratea (I)Stiffness of metals, alloys and componentsHort, N., Wiese, B., Wolff, M., Ebel, T., Maier, P. (2014)
In: 6th Symposium on Biodegradable Metals, Maratea (I), - conference lecture: Ponta Delgado, Sao Miguel (P)Deformation-induced dynamic precipitation during creep in magnesium-tin alloysHuang, Y., Dieringa, H., Kainer, K.U., Hort, N. (2014)
In: 13th International Conference on Fracture and Damage Mechanics, FDM 2014, Ponta Delgado, Sao Miguel (P), - conference lecture: Maratea (I)Thermodynamic calculation and experimental studies of phase relations in the Mg-Si-Ca-Sr system for degradable biomaterialsGil-Santos, A., Szakacs, G., Hort, N., Biest, O.van der (2014)
In: 6th Symposium on Biodegradable Metals, Maratea (I), - journal articleStudy of hot forging behavior of as-cast Mg–3Al–1Zn–2Ca alloy towards optimization of its hot workabilitySuresh, K., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2014)
In: Materials and Design, Vol. 57, 697-704. - conference poster: Maratea (I)Properties of pure Mg and low-concentrated binary Mg-(Gd, Ag, Ca) alloysLu, Y., Huang, Y., Feyerabend, F., Willumeit-Roemer, R., Kainer, K.U., Hort, N. (2014)
In: 6th Symposium on Biodegradable Metals, Maratea (I),
2013
- conference poster: Paris (F)Effect of gadolinium content on the corrosion behaviour of magnesium alloys in 1% NaCl solutionHamdani, M., Zidane, N., Ait Addi, A., Douch, J., Dietzel, W., Dieringa, H., Hort, N. (2013)
In: Proceedings of Journees Electrochimie 2013, Paris (F), 212. - journal articleHot Tearing Characteristics of Binary Mg-Gd Alloy CastingsSrinivasan, A., Wang, Z., Huang, Y., Beckmann, F., Kainer, K.U., Hort, N. (2013)
In: Metallurgical and Materials Transactions A, Vol. 44, 5, 2285-2298. - conference paper: San Antonio, TX (USA)High Temperature Deformation of Magnesium Alloy TX32-0.4Al-0.8SiDharmendra, C., Rao, K.P., Hort, N., Kainer, K.U. (2013)
In: Magnesium Technology 2013, Proceedings of TMS 2013 Annual Meeting & Exhibition, San Antonio, TX (USA), 41-45. - conference lecture: San Antonio, TX (USA)High Temperature Deformation of Magnesium Alloy TX32-0.4Al-0.8SiDharmendra, C., Rao, K.P., Hort, N., Kainer, K.U. (2013)
In: 142nd Annual Meeting & Exhibition, TMS 2013, San Antonio, TX (USA), - conference lecture: Old Windsor (GB)Influences of Y Additions on the Hot Tearing Susceptibility of Mg-1.5wt.%Zn AlloysWang, Z., Huang, Y., Srinivasan, A., Zhen, L., Kainer, K.U., Hort, N. (2013)
In: 6th Internaternational Light Metals Technology Conference, LMT 2013, Old Windsor (GB), - conference paper: San Antonio, TX (USA)Effect of Sn additions on the age hardening response, microstructures and corrosion resistance of Mg-0.8Ca (wt%) alloysMendis, C.L., Tolnai, D., Blawert, C., Hort, N. (2013)
In: Magnesium Technology 2013, Proceedings of TMS 2013 Annual Meeting & Exhibition, San Antonio, TX (USA), 237-241. - journal articleInfluence of Ce addition on microstructure and mechanical properties of high pressure die cast AM50 magnesium alloyMert, F., Oezdemir, A., Kainer, K.U., Hort, N. (2013)
In: Transactions of Nonferrous Metals Society of China, Vol. 23, 1, 66-72. - book partMagnesium and Magnesium AlloysSillekens, W., Hort, N. (2013)
In: Structural Materials and Processes in Transportation, 113-151. - conference paper: San Antonio, TX (USA)Nucleation Kinetics of the Gamma-Phase in a Binary Mg-Al AlloyLalporr, M., Dzwonczyk, J.S., Hort, N., Offermann, S.E. (2013)
In: Magnesium Technology 2013, Proceedings of TMS 2013 Annual Meeting & Exhibition, San Antonio, TX (USA), 259-262. - journal articleInfluences of Y Additions on the Hot Tearing Susceptibility of Mg-1.5wt.%Zn AlloysWang, Z., Huang, Y., Srinivasan, A., Zhen, L., Kainer, K.U., Hort, N. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, 306-310. - journal articleEffects of Sn segregation and precipitates on creep response of Mg-Sn alloysHuang, Y., Dieringa, H., Kainer, K.U., Hort, N. (2013)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 36, 4, 308-315. - journal articleElement distribution in the corrosion layer and cytotoxicity of alloy Mg–10Dy during in vitro biodegradationYang, L., Hort, N., Laipple, D., Hoeche, D., Huang, Y., Kainer, K.U., Willumeit, R., Feyerabend, F. (2013)
In: Acta Biomaterialia, Vol. 9, 10, 8475-8487. - conference lecture: Zeulenroda (D)Alternative metallische Korrosionsschutzschichten fuer MagnesiumlegierungenBlawert, C., Stoermer, M., Huang, Y., Hoeche, D. (2013)
In: 9. ThGOT Thementage Grenz- und Oberflaechentechnik, Zeulenroda (D), - journal articleMicrostructure, mechanical and corrosion properties of Mg–Dy–Gd–Zr alloys for medical applicationsYang, L., Huang, Y., Feyerabend, F., Willumeit, R., Mendis, C., Kainer, K.U., Hort, N. (2013)
In: Acta Biomaterialia, Vol. 9, 10, 8499-8508. - journal articleCompression-creep response of magnesium alloy DieMag422 containing barium compared with the commercial creep-resistant alloys AE42 and MRI230DDieringa, H., Huang, Y., Wittke, P., Klein, M., Walther, F., Dikovits, M., Poletti, C. (2013)
In: Materials Science and Engineering A, Vol. 585, 430-438. - journal articleFabrication of magnesium alloy with high strength and heat-resistance by hot extrusion and ageingYu, Z.J., Huang, Y., Qiu, X., Yang, Q., Sun, W., Tian, Z., Zhang, D.P., Meng, J. (2013)
In: Materials Science and Engineering A, Vol. 578, 346-353. - journal articleNucleation mechanism of Mg17Al12-precipitates in binary Mg–7 wt.% Al alloyLalpoor, M., Dzwonczyk, J.S., Hort, N., Offerman, S.E. (2013)
In: Journal of Alloys and Compounds, Vol. 557, 73-76. - journal articleIn situ synchrotron diffraction of the solidification of Mg4Y3NdTolnai, D., Mendis, C.L., Stark, A., Szakacs, G., Wiese, B., Kainer, K.U., Hort, N. (2013)
In: Materials Letters, Vol. 102-103, 62-64. - conference lecture: San Antonio, TX (USA)Effect of Sn additions on the age hardening response, microstructures and corrosion resistance of Mg-0.8Ca (wt%) alloysMendis, C.L., Tolnai, D., Blawert, C., Hort, N. (2013)
In: 142nd Annual Meeting & Exhibition, TMS 2013, San Antonio, TX (USA), - journal articleDevelopment of a magnesium secondary alloy system for mixed magnesium post-consumer scrapFechner, D., Blawert, C., Hort, N., Dieringa, H., Kainer, K.U. (2013)
In: Materials Science and Engineering A, Vol. 576, 222-230. - conference lecture: San Antonio, TX (USA)Nucleation Kinetics of the Gamma-Phase in a Binary Mg-Al AlloyLalporr, M., Dzwonczyk, J.S., Hort, N., Offermann, S.E. (2013)
In: 142nd Annual Meeting & Exhibition, TMS 2013, San Antonio, TX (USA), - conference paper: San Antonio, TX (USA)A new magnesium alloy system: TEXASWiese, B., Mendis, C.L., Blawert, C., Hort, N., Kainer, K.U., Nyberg, E. (2013)
In: Magnesium Technology 2013, Proceedings of TMS 2013 Annual Meeting & Exhibition, San Antonio, TX (USA), 231-235. - conference lecture: Old Windsor (GB)Microstructure, Mechanical and Corrosion Properties of Mg-Gd-Zn AlloysSrinivasan, A., Huang, Y., Mendis, C., Dieringa, H., Blawert, C., Kainer, K.U., Hort, N. (2013)
In: 6th Internaternational Light Metals Technology Conference, LMT 2013, Old Windsor (GB), - journal articleMicrostructure, Mechanical and Corrosion Properties of Mg-Gd-Zn AlloysSrinivasan, A., Huang, Y., Mendis, C., Dieringa, H., Blawert, C., Kainer, K.U., Hort, N. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, 28-32. - lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IHort, N. (2013)
- conference lecture: San Antonio, TX (USA)A new magnesium alloy system: TEXASWiese, B., Mendis, C.L., Blawert, C., Hort, N., Kainer, K.U., Nyberg, E. (2013)
In: 142nd Annual Meeting & Exhibition, TMS 2013, San Antonio, TX (USA), - conference poster: Hamburg (D)In situ solidification of a Mg-10 wt% CaOWiese, B., Mendis, C., Tolnai, D., Stark, A., Schell, N., Hort, N., Kainer, K.U., Reichel, H.-P., Brueckner, R. (2013)
In: European XFEL / DESY Photon Science Users Meeting, Hamburg (D), - conference poster: Paris (F)Effect of gadolinium content on the corrosion behaviour of magnesium alloys in 1% NaCl solutionHamdani, M., Zidane, N., Ait Addi, A., Douch, J., Dietzel, W., Dieringa, H., Hort, N. (2013)
In: Journees Electrochimie 2013, Paris (F), - conference lecture: Bellevue, WA (USA)Magnesium Alloys in AerospaceDieringa, H., Hort, N., Kainer, K.U. (2013)
In: AeroMat 2013, Bellevue, WA (USA), - journal articleFast Escape of Hydrogen From Gas Cavities Around Corroding Magnesium ImplantsKuhlmann, J., Bartsch, I., Willbold, E., Schuchardt, S., Holz, O., Hort, N., Hoeche, D., Heineman, W.R., Witte, F. (2013)
In: Acta Biomaterialia, Vol. 9, 10, 8714-8721. - conference paper: Brno (CZ)Effect of Internal Defects on Tensile Properties of A356 Casting AlloysCheng, J., Hort, N., Kainer, K.U., Kwak, S. (2013)
In: METAL 2013 - 22nd International Conference on Metallurgy and Materials, Conference Proceedings, Brno (CZ), 1171-1176. - journal articleStudy of the Solidification of AS Alloys Combining in situ Synchrotron Diffraction and Differential Scanning CalorimetryTolnai, D., Szakacs, G., Requena, G., Stark, A., Schell, N., Kainer, K.U., Hort, N. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, 286-290. - journal articleHot tearing susceptibility of binary MgY alloy castingsWang, Z., Huang, Y., Srinivasan, A., Zheng, L., Beckmann, F., Kainer, K.U., Hort, N. (2013)
In: Materials and Design, Vol. 47, 90-100. - conference lecture: San Antonio, TX (USA)In situ synchrotron diffraction of the solidification of Mg-RE alloysTolnai, D., Mendis, C.L., Stark, A., Szakacs, G., Wiese, B., Kainer, K.U., Hort, N. (2013)
In: 142nd Annual Meeting & Exhibition, TMS 2013, San Antonio, TX (USA), - conference paper: San Antonio, TX (USA)In situ synchrotron diffraction of the solidification of Mg-RE alloysTolnai, D., Mendis, C.L., Stark, A., Szakacs, G., Wiese, B., Kainer, K.U., Hort, N. (2013)
In: Magnesium Technology 2013, Proceedings of TMS 2013 Annual Meeting & Exhibition, San Antonio, TX (USA), 253-257. - conference lecture: Xian (VRC)Hot Tearing of Magnesium AlloysWang, Z., Huang, Y., Zhen, Z., Liu, Z., Kainer, K.U., Hort, N. (2013)
In: 70th Annual World Magnesium Conference, Xian (VRC), - conference paper: Xian (VRC)Hot Tearing of Magnesium AlloysWang, Z., Huang, Y., Zhen, Z., Liu, Z., Kainer, K.U., Hort, N. (2013)
In: Proceedings of 70th Annual World Magnesium Conference, Xian (VRC), 53-63. - conference lecture: Brno (CZ)Effect of Internal Defects on Tensile Properties of A356 Casting AlloysCheng, J., Hort, N., Kainer, K.U., Siyoung, K. (2013)
In: 22nd International Conference on Metallurgy and Materials, Metal 2013, Brno (CZ), - conference lecture: Old Windsor (GB)Study of the Solidification of AS Alloys Combining in situ Synchrotron Diffraction and Differential Scanning CalorimetryTolnai, D., Szakacs, G., Requena, G., Stark, A., Schell, N., Kainer, K.U., Hort, N. (2013)
In: 6th Internaternational Light Metals Technology Conference, LMT 2013, Old Windsor (GB), - conference object:Bending strength and crack propagation in cast Mg10Gd influenced by corrosionMaier, P., Mendis, C.L., Tober, G., Briesemeister, J., Minciel, E., Hort, N. (2013)
In: European Cells and Materials, Vol. 26, S 5, 23. - conference poster: Erlangen (D)Mikrostruktur und Ermuedungsverhalten von Magnesium Stent-Roehrchen in Luft und koerperaehnlichem SerumKlein, M., Penning, B., Walther, F., Dietzel, W., Hort, N. (2013)
In: Jahrestagung der Deutschen Gesellschaft fuer Biomaterialien, DGBM 2013, Erlangen (D), - conference lecture (invited): Singapore (SGP)Precipitate formation during creep of Mg10Gd(2-6)Zn alloysMendis, C.L., Srinivasan, A., Huang, Y., Hort, N., Kainer, K.U. (2013)
In: 22nd International Conference on Processing and Fabrication of Advanced Materials, PFAM XXII, Singapore (SGP), - conference paper: Old Windsor (GB)Study of the Solidification of AS Alloys Combining in situ Synchrotron Diffraction and Differential Scanning CalorimetryTolnai, D., Szakacs, G., Requena, G., Stark, A., Schell, N., Kainer, K.U., Hort, N. (2013)
In: Light Metals Technology 2013, 6th Internaternational Light Metals Technology Conference, LMT 2013, Old Windsor (GB), 286-290. - conference lecture: Zeulenroda (D)Alternative metallische Korrosionsschutzschichten fuer MagnesiumlegierungenBlawert, C., Stoermer, M., Huang, Y., Hoeche, D. (2013)
In: Tagungsband, 9. ThGOT Thementage Grenz- und Oberflaechentechnik, Zeulenroda (D), 56-60. - conference lecture: Umang Island (RI)Do we need alloying elements for Mg implant materials?Hort, N., Mendis, C.L., Maier, P. (2013)
In: 5th Symposium on Biodegradable Metals for Biomedical Applications, Biometal 2013, Umang Island (RI), - conference paper: Old Windsor (GB)Effect of Grain Size and Structure, Solid Solution Elements, Precipitates and Twinning on Nanohardness of Mg-RE alloysMaier, P., Richter, A., Tober, G., Hort, N. (2013)
In: Light Metals Technology 2013, 6th Internaternational Light Metals Technology Conference, LMT 2013, Old Windsor (GB), 491-495. - journal articleEffect of Grain Size and Structure, Solid Solution Elements, Precipitates and Twinning on Nanohardness of Mg-RE alloysMaier, P., Richter, A., Tober, G., Hort, N. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, 491-495. - journal articleMechanical properties and corrosion behaviour of freestanding, precipitate-free magnesium WE43 thin filmsSchlueter, K., Zamponi, C., Hapke, J., Hort, N., Kainer, K.U., Quandt, E. (2013)
In: International Journal of Materials Research, Vol. 104, 3, 286-292. - conference lecture: Las Vegas, CA (USA)Influence of Nd in extruded Mg10Gd base alloys on fatigue strengthMaier, P., Tober, G., Mendis, C.L., Mueller, S., Hort, N. (2013)
In: International Conference on Processing and Manufacturing of Advanced Materials, Thermec 2013, Las Vegas, CA (USA), - conference paper: Old Windsor (GB)Microstructure, Mechanical and Corrosion Properties of Mg-Gd-Zn AlloysSrinivasan, A., Huang, Y., Mendis, C., Dieringa, H., Blawert, C., Kainer, K.U., Hort, N. (2013)
In: Light Metals Technology 2013, 6th Internaternational Light Metals Technology Conference, LMT 2013, Old Windsor (GB), 28-32. - journal articleZone coulometry and ion-release analysis of degradable magnesium alloysSchille, C., Schweizer, E., Hort, N., Reichel, H.-P., Geis-Gerstorfer, J. (2013)
In: Emerging Materials Research, Vol. 2, 5, 248-262. - journal articleTailoring properties of cast Mg10Gd by alloying Nd and heat treatmentMaier, P., Mendis, C., Tober, G., Hort, N. (2013)
In: Emerging Materials Research, Vol. 2, 5, 229-238. - journal articleMicrostructure and mechanical properties of as-cast Mg–Sn–Ca alloys and effect of alloying elementsSuresh, K., Rao, K.P., Prasad, Y.V.R,K., Hort, N., Kainer, K.U. (2013)
In: Transactions of Nonferrous Metals Society of China, Vol. 23, 12, 3604-3610. - conference lecture: Las Vegas, CA (USA)Hot forging of cast magnesium alloy TX31 using semi-closed die and its finite element simulationRao, K.P., Suresh, K., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2013)
In: International Conference on Processing and Manufacturing of Advanced Materials, Thermec 2013, Las Vegas, CA (USA), - journal articleBulk and local textures of pure magnesium processed by rotary swagingGan, W.M., Huang, Y.D., Wang, R., Zhong, Z.Y., Hort, N., Kainer, K.U., Schell, N., Brokmeier, H.-G., Schreyer, A. (2013)
In: Journal of Magnesium and Alloys, Vol. 1, 4, 341-345. - report partIn situ diffraction of the melting and the solidification of magnesium alloys containing CaOWiese, B., Tolnai, D., Mendis, C., Eckerlebe, H., Hort, N. (2013)
In: Annual Report Photon Science 2013, - conference lecture: Hamburg (D)Powder Metallurgy Processing of Magnesium Alloys Challenges and Potential Contributions for Light Weight StructuresHort, N., Ebel, T., Wolff, M. (2013)
In: Light Metals for Future Vehicle Concepts, Hamburg (D), - conference paper: Old Windsor (GB)Influences of Y Additions on the Hot Tearing Susceptibility of Mg-1.5wt.%Zn AlloysWang, Z., Huang, Y., Srinivasan, A., Zhen, L., Kainer, K.U., Hort, N. (2013)
In: Light Metals Technology 2013, 6th Internaternational Light Metals Technology Conference, LMT 2013, Old Windsor (GB), 306-310. - conference lecture: Old Windsor (GB)Effect of Grain Size and Structure, Solid Solution Elements, Precipitates and Twinning on Nanohardness of Mg-RE alloysMaier, P., Richter, A., Tober, G., Hort, N. (2013)
In: 6th Internaternational Light Metals Technology Conference, LMT 2013, Old Windsor (GB), - journal articleComparison of different in vitro tests for biocompatibility screening of Mg alloysScheideler, L., Fueger, C., Schille, C., Rupp, F., Wendel, H.-P., Hort, N., Reichel, H.P., Geis-Gerstorfer, J. (2013)
In: Acta Biomaterialia, Vol. 9, 10, 8740-8745. - conference lecture: Madrid (E)Characterisation of Nano-scaled Precipitates in a Peak Aged Mg-8Gd-2Dy AlloyMendis, C., Lefebvre, W., Yang, L., Huang, Y., Kainer, K.U., Hort, N. (2013)
In: International Workshop on Processing-Microstructure-Mechanical Property of Magnesium Alloys, Madrid (E), - journal articleMikrostruktur und Ermuedungsverhalten von Magnesium Stent-Roehrchen in Luft und koerperaehnlichem SerumKlein, M., Penning, B., Walther, F., Dietzel, W., Hort, N. (2013)
In: BioNanoMaterials, Vol. 14, S, 17. - conference lecture (invited): Changchun (VRC)Magnesium Alloys Containing Rare EarthHort, N. (2013)
In: Materials Science Seminar of CIAC, Changchun (VRC), - conference lecture: Bremen (D)In situ synchrotron diffraction of the solidification of Mg-Al alloys containing CaOWiese, B., Mendis, C., Tolnai, D., Szakacs, G., Stark, A., Schell, N., Reichel, H.-P., Brueckner, R., Hort, N., Kainer, K.U. (2013)
In: International Congress and Exhibition on Light Materials Aluminium, Magnesium, Titanium and their Alloys, Euro LightMAT 2013, Bremen (D), - conference poster: Umang Island (RI)Bending strength and crack propagation in cast Mg10Gd influenced by corrosionMaier, P., Mendis, C.L., Tober, G., Briesemeister, J., Minciel, E., Hort, N. (2013)
In: 5th Symposium on Biodegradable Metals for Biomedical Applications, Biometal 2013, Umang Island (RI), - journal articleHigh Temperature Deformation and Microstructural Features of TXA321 Magnesium Alloy: Correlations with Processing MapDharmendra, C., Rao, K.P., Venkata, Y., Prasad, R.K., Hort, N., Kainer, K.U. (2013)
In: Advanced Engineering Materials, Vol. 15, 8, 761-766. - conference object:Do we need alloying elements for Mg implant materials?Hort, N., Mendis, C.L., Maier, P. (2013)
In: European Cells and Materials, Vol. 26, S 5, 1. - conference lecture: Montreal (CDN)Microstructure investigation of Mg-10Gd-1La containing alloy subjected to fatigue deformationMendis, C.L., Maier, P., Mueller, S., Kainer, K.U., Hort, N. (2013)
In: Materials Science and Technology 2013, Montreal (CDN), - conference paper: Montreal (CDN)Microstructure investigation of Mg-10Gd-1La containing alloy subjected to fatigue deformationMendis, C.L., Maier, P., Mueller, S., Kainer, K.U., Hort, N. (2013)
In: Materials Science and Technology 2013, Montreal (CDN), 1542-1549. - journal articleThree-dimensional characterisation of micropores and graphite nodules in ductile cast ironCrespo, J., Requena, G., Degischer, H.-P., Track, K., Tolnai, D. (2013)
In: International Foundry Research, 3, 04. - lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IIHort, N. (2013)
- conference lecture (invited): Las Vegas, CA (USA)Challenges in the development of degradable Mg implant materialsHort, N. (2013)
In: International Conference on Processing and Manufacturing of Advanced Materials, Thermec 2013, Las Vegas, CA (USA), - journal articleEffect of solution heat treatment on the internal architecture and compressive strength of an AlMg4.7Si8 alloyTolnai, D., Requena, G., CCloetens, P., Lendvai, J., Degischer, H.P. (2013)
In: Materials Science and Engineering A, Vol. 585, 480-487. - lecture: Universidade de Sao Paolo, FB Engenharia de MateriaisElectrons, Neutrons and Synchrotron Radiation for Engineering MaterialsTolnai, D. (2013)
- journal articleCompressive strength and hot deformation mechanisms in as-cast Mg-4Al-2Ba-2Ca (ABaX422) alloyRao, K.P., Ip, H.Y., Suresh, K., Prasad, Y.V.R.K., Wu, C.M.L., Hort, N., Kainer, K.U. (2013)
In: Philosophical Magazine, Vol. 93, 35, 4364-4377. - journal articleThermodynamic assessment and experimental study of MgGd alloysHampl, M., Blawert, C., Silva Campos, M.R., Hort, N., Peng, Q., Kainer, K.U., Schmid-Fetzer, R. (2013)
In: Journal of Alloys and Compounds, Vol. 581, 166-177.
2012
- conference lecture: Venedig (I)Ultrasonic Stirring as a Production Process for Nanoparticle Reinforced Magnesium Alloys and the Compression Creep Response of Ze10 Reinforced with Ceria NanoparticlesDieringa, H., Hort, N., Kainer, K.U. (2012)
In: Proceedings of the 15th European Conference on Composite Materials, ECCM 15, Venedig (I), - journal articleIn situ synchrotron tomographic investigation of the solidification of an AlMg4.7Si8 alloyTolnai, D., Townsend, P., Requena, G., Salvo, L., Lendvai, J., Degischer, H.P. (2012)
In: Acta Materialia, Vol. 60, 6-7, 2568-2577. - conference lecture: Venedig (I)Ultrasonic Stirring as a Production Process for Nanoparticle Reinforced Magnesium Alloys and the Compression Creep Response of Ze10 Reinforced with Ceria NanoparticlesDieringa, H., Hort, N., Kainer, K.U. (2012)
In: 15th European Conference on Composite Materials, ECCM 15, Venedig (I), - book partMetal Matrix Composites: MagnesiumLuthringer, B.J.C., Hort, N., Feyerabend, F. (2012)
In: Wiley Encyclopedia of Composites, 2nd Edition, Vol. 3, 1756-1777. - conference lecture: Vancouver (CDN)The Influence of Micro-Alloying Elements Al and Si on Properties of the Alloy Mg-3Sn-2CaHapke, J., Abu Leil, T., Huang, Y., Kainer, K.U., Hort, N. (2012)
In: 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), - conference paper: Vancouver (CDN)Development of a Standard Test to Evaluate Bolt-Load Retention of Magnesium AlloysXu, S., Shen, G., Williams, G., Anopuo, O., Hort, N., Kainer, K.U., Staron, P. (2012)
In: Proceedings of the 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), 689-694. - conference paper: Vancouver (CDN)The Influence of Micro-Alloying Elements Al and Si on Properties of the Alloy Mg-3Sn-2CaHapke, J., Abu Leil, T., Huang, Y., Kainer, K.U., Hort, N. (2012)
In: Proceedings of the 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), 143-148. - journal articlePolycrystalline and amorphous MgZnCa thin filmsSchlueter, K., Zamponi, C., Hort, N., Kainer, K.U., Quandt, E. (2012)
In: Corrosion Science, Vol. 63, 234-238. - conference lecture: Vancouver (CDN)Development of a Standard Test to Evaluate Bolt-Load Retention of Magnesium AlloysXu, S., Shen, G., Williams, G., Anopuo, O., Hort, N., Kainer, K.U., Staron, P. (2012)
In: 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), - conference lecture: Vancouver (CDN)Amorphous Thin Films Consisting of Ternary MgZnCa-AlloysSchlueter, K., Zamponi, C., Schuermann, U., Hort, N., Kienle, L., Kainer, K.U., Quandt, E. (2012)
In: 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), - conference paper: Vancouver (CDN)Amorphous Thin Films Consisting of Ternary MgZnCa-AlloysSchlueter, K., Zamponi, C., Schuermann, U., Hort, N., Kienle, L., Kainer, K.U., Quandt, E. (2012)
In: Proceedings of the 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), 129-133. - conference lecture: Vancouver (CDN)Corrosion Behaviour of High Pressure Die Cast Mg-5al-0.4mn-Xce(X=0, 0.5, 1) AlloysMert, F., Blawert, C., Kainer, K.U., Hort, N. (2012)
In: 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), - journal articleCorrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill castingQiao, Z., Shi, Z., Hort, N., Abidin, N.I.Z., Atrens, A. (2012)
In: Corrosion Science, Vol. 61, 185-207. - conference paper: Vancouver (CDN)Corrosion Behaviour of High Pressure Die Cast Mg-5al-0.4mn-Xce(X=0, 0.5, 1) AlloysMert, F., Blawert, C., Kainer, K.U., Hort, N. (2012)
In: Proceedings of the 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), 203-208. - journal articleEffects of corrosion environment and proteins on magnesium corrosionYang, L., Hort, N., Willumeit, R., Feyerabend, F. (2012)
In: Corrosion Engineering Science and Technology, Vol. 47, 5, 335-339. - conference lecture (invited): Vancouver (CDN)PEO processing of magnesium alloys using particle containing electrolytesBlawert, C., Srinivasan, B., Liang, J., Huang, Y., Hoeche, D. (2012)
In: 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), - journal articleDevelopment of High Performance Single-Phase Solid Solution Magnesium Alloy at Low TemperaturePeng, Q., Huang, Y., Kainer, K.U., Hort, N. (2012)
In: Advanced Engineering Materials, Vol. 14, 3, 178-184. - journal articleThe formation of Sr6.33Mg16.67Si13 in magnesium alloy AM50 and its effect on mechanical propertiesFechner, D., Hort, N., Blawert, C., Dieringa, H., Stoermer, M., Kainer, K.U. (2012)
In: Journal of Materials Science, Vol. 47, 14, 5461-5469. - conference lecture (invited): Budapest (H)Entwicklung von Mg Legierungen im MagICHort, N. (2012)
In: Seminar des Instituts fuer Werkstoffphysik, Budapest (H), - conference paper: Orlando, FL (USA)Texture Evolution During Hot Deformation Processing of Mg-3sn-2ca-0.4Al AlloyDharmendra, C., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Orlando, FL (USA), 295-300. - conference lecture: Orlando, FL (USA)Texture Evolution During Hot Deformation Processing of Mg-3sn-2ca-0.4Al AlloyDharmendra, C., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Orlando, FL (USA), - conference paper: Orlando, FL (USA)Mechanical and Corrosion Properties of As-Cast and Extruded Mg10gd Alloy for Biomedical ApplicationMaier, P., Mueller, S., Dieringa, H., Hort, N. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Orlando, FL (USA), 253-259. - conference lecture: Orlando, FL (USA)Mechanical and Corrosion Properties of As-Cast and Extruded Mg10gd Alloy for Biomedical ApplicationMaier, P., Mueller, S., Dieringa, H., Hort, N. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Orlando, FL (USA), - conference paper: Orlando, FL (USA)Microstructure and Mechanical Properties of High Pressure Die Cast Am50 Magnesium Alloy Containing CeMert, F., Oezdemir, A., Kainer, K.U., Hort, N. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Orlando, FL (USA), 149-154. - conference lecture: Orlando, FL (USA)Microstructure and Mechanical Properties of High Pressure Die Cast Am50 Magnesium Alloy Containing CeMert, F., Oezdemir, A., Kainer, K.U., Hort, N. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Orlando, FL (USA), - conference paper: Orlando, FL (USA)Microstructure and Creep Properties of MEZ Magnesium Alloy Processed by ThixocastingMorales Garza, E.D., Dieringa, H., Hort, N., Kainer, K.U. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Orlando, FL (USA), 385-389. - conference poster: Chengdu (VRC)Magnesium silver alloys as multifunctional biodegradable biomaterialsFeyerabend, F., Tie, D., Schade, R., Liefeith, K., Hoeche, D., Laipple, D., Mueller, W.-D., Kainer, K.U., Schreyer, A., Hort, N., Willumeit, R. (2012)
In: 9th World Biomaterials Congress, Chengdu (VRC), - conference paper: Vancouver (CDN)Effect of Deformation Conditions on Microstructure and Texture During Compression of Mg-3Sn-2Ca-0.4Al-0.4Si AlloyDharmendra, C., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2012)
In: Proceedings of the 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), 473-478. - journal articleIdentification of unexpected hydrides in Mg-20 wt% Dy alloy by high-brilliance synchrotron radiationGan, W., Huang, Y., Yang, L., Kainer, K.U., Jiang, M., Brokmeier, H.-G., Hort, N. (2012)
In: Journal of Applied Crystallography, Vol. 45, 17-21. - journal articleIon release from magnesium materials in physiological solutions under different oxygen tensionsFeyerabend, F., Druecker, H., Laipple, D., Vogt, C., Stekker, M., Hort, N., Willumeit, R. (2012)
In: Journal of Materials Science: Materials in Medicine, Vol. 23, 1, 9-24. - conference lecture: Orlando, FL (USA)Microstructure and Creep Properties of MEZ Magnesium Alloy Processed by ThixocastingMorales Garza, E.D., Dieringa, H., Hort, N., Kainer, K.U. (2012)
In: Magnesium Technology 2012, TMS Annual Meeting & Exhibition, Symposium, Orlando, FL (USA), - conference lecture: Vancouver (CDN)Effect of Deformation Conditions on Microstructure and Texture During Compression of Mg-3Sn-2Ca-0.4Al-0.4Si AlloyDharmendra, C., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2012)
In: 9th International Conference on Magnesium Alloys and their Applications, MG 2012, Vancouver (CDN), - journal articleRole of sintering and clay particle additions on coating formation during PEO processing of AM50 magnesium alloyBlawert, C., Sah, S.P., Liang, J., Huang, Y., Hoeche, D. (2012)
In: Surface and Coatings Technology, Vol. 213, 48-58. - journal articleInfluence of ageing treatment on microstructure, mechanical and bio-corrosion properties of Mg–Dy alloysYang, L., Huang, Y., Feyerabend, F., Willumeit, R., Kainer, K.U., Hort, N. (2012)
In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 13, 36-44. - journal articleSub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloyTolnai, D., Requena, G., Cloetens, P., Lendvai, J., Degischer, H.-P. (2012)
In: Materials Science and Engineering A, Vol. 550, 214-221. - lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IHort, N. (2012)
- journal articleHot Deformation Mechanisms in AZ31 Magnesium Alloy Extruded at Different Temperatures: Impact of TextureRao, K.P., Prasad, Y.V.R.K., Dzwonczyk, J., Hort, N., Kainer, K.U. (2012)
In: Metals, Vol. 2, 3, 292-312. - conference lecture: Hamburg (D)Influence of Ageing Treatment on Microstructure, Mechanical and Bio-corrosion Properties of Mg-Dy alloysFeyerabend, F., Yang, L., Huang, Y., Willumeit, R., Kainer, K.U., Hort, N. (2012)
In: Jahrestagung der Deutschen Gesellschaft fuer Biomaterialien, DGBM 2012, Hamburg (D), - report partIn situ solidifcation of a Mg-10 wt% CaOWiese, B., Tolnai, D., Mendis, C., Stark, A., Kainer, K.U., Hort, N. (2012)
In: Annual Report Photon Science 2012, - conference lecture: Garmisch-Partenkirchen (D)Residual stresses near the hot sprues of as-cast Mg-Zn alloys investigated by STRESS-SPEC neutron diffractometerGan, W.M., Huang, Y.D., Wang, Z., Hort, N., Hofmann, M. (2012)
In: International Conference on Residual Stress, ICRS-9, Garmisch-Partenkirchen (D), - book partPrediction of hot tearing tendency for binary Mg-Y alloysWang, Z., Huang, Y., Srinivasan, A., Liu, Z., Kainer, K.U., Hort, N. (2012)
In: Developments in mechanical engineering, Vol. 5, 191-197. - conference lecture: Chengdu (VRC)Influence of Ageing Treatment on Microstructure, Mechanical and Bio-corrosion Properties of Mg-Dy alloysYang, L., Huang, Y., Feyerabend, F., Willumeit, R., Kainer, K.U., Hort, N. (2012)
In: 9th World Biomaterial Congress, Chengdu (VRC), - conference lecture: Maratea (I)Influence of Dy on the bio-corrosion behavior of binary Mg-Dy alloys in cell culture mediumYang, L., Feyerabend, F., Blawert, C., Willumeit, R., Huang, Y., Kainer, K.U., Hort, N. (2012)
In: 4th International Symposium on Biodegradable Metals, Maratea (I), - conference lecture: Melbourne (AUS)Deformation Microstructures and Textures of Cast Mg-3Sn-2Ca Alloy under Uniaxial Hot CompressionDharmendra, C., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2012)
In: International Conference on Mechanical Engineering and Materials, ICMEM 2012, Melbourne (AUS), - conference lecture: Aschaffenburg (D)MIM von MagnesiumEbel, T., Wolff, M., Wiese, B., Deussing, J. (2012)
In: 25. MIM Expertenkreis Sitzung, Aschaffenburg (D), - journal articleHot Tearing Susceptibility of Magnesium–Gadolinium Binary AlloysSrinivasan, A., Wang, Z., Huang, Y., Beckmann, F., Kainer, K.U., Hort, N. (2012)
In: Transactions of the Indian Institute of Metals, Vol. 65, 6, 701-706. - lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IIHort, N. (2012)
- journal articleInfluence of cerium additions on the corrosion behaviour of high pressure die cast AM50 alloyMert, F., Blawert, C., Kainer, K.U., Hort, N. (2012)
In: Corrosion Science, Vol. 65, 145-151. - conference lecture (invited): Busan (ROK)Changing PEO coating formation on Mg alloys by particle additions to the treatment electrolyteBlawert, C., Srinivasan, P.B., Liang, J., Huang, Y., Hoeche, D., Scharnagl, N., Heitmann, V., Burmester, U. (2012)
In: 2012 Fall Meeting of the Korean Institute of Surface Engineering, Busan (ROK), - conference lecture: Joenkoeping (S)State of the Art for Cast Magnesium – A Material for the FutureHort, N. (2012)
In: Cost Efficient Cast Components, Joenkoeping (S), - journal articleHot working mechanisms and texture development in Mg-3Sn-2Ca-0.4Al alloyDharmendra, C., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2012)
In: Materials Chemistry and Physics, Vol. 136, 2-3, 1081-1091. - journal articleDeformation Microstructures and Textures of Cast Mg-3Sn-2Ca Alloy under Uniaxial Hot CompressionDharmendra, C., Rao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2012)
In: Applied Mechanics and Materials, Mechanical Engineering and Materials, Vol. 152-154, 322-325. - conference lecture: Maratea (I)Impurities in the Production and Processing of Magnesium AlloysHort, N., Vogt, C. (2012)
In: 4th International Symposium on Biodegradable Metals, Maratea (I), - journal articleMetallurgical Characterization of Hot Tearing Curves Recorded during Solidification of Magnesium AlloysHuang, Y., Wang, Z., Srinivasan, A., Kainer, K.U., Hort, N. (2012)
In: Acta Physica Polonica A, Vol. 122, 3, 497-500. - conference poster: Chengdu (VRC)Magnesium corrosion in a bioreactorWillumeit, R., Fischer, J., Poertner, R., Di, T., Hort, N., Kainer, K.U., Wilde, F., Schreyer, A., Feyerabend, F. (2012)
In: 9th World Biomaterials Congress, Chengdu (VRC), - conference lecture: Maratea (I)Magnesium Silver Alloys as Multifunctional Biodegradable BiomaterialsDi, T., Feyerabend, F., Schade, R., Liefeith, K., Hoeche, D., Laipple, D., Mueller, W.-D., Kainer, K.U., Schreyer, A., Hort, N., Willumeit, R. (2012)
In: 4th International Symposium on Biodegradable Metals, Maratea (I), - journal articleHigh ductile as-cast Mg–RE based alloys at room temperaturePeng, Q., Huang, Y., Kainer, K.U., Hort, N. (2012)
In: Materials Letters, Vol. 83, 209-212. - journal articleHot deformation behavior of Mg–2Sn–2Ca alloy in as-cast condition and after homogenizationRao, K.P., Prasad, Y.V.R.K., Suresh, K., Hort, N., Kainer, K.U. (2012)
In: Materials Science and Engineering A, Vol. 552, 444-450.
2011
- journal articleModeling Bolt Load Retention of Ca Modified AS41 Using Compliance-Creep MethodAnopuo, O., Huang, Y., Hort, N., Kainer, K.U., Maier, P. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, 278-281. - conference lecture: Lueneburg (D)Castability of some Magnesium Alloys in a Novel Castability DieEaston, M.A., Gibson, M.A., Gershenzon, M., Savage, G., Tyagi, V., Abbott, T.B., Hort, N. (2011)
In: 5th International Light Metals Technology Conference 2011, Lueneburg (D), - conference paper: Lueneburg (D)Castability of some Magnesium Alloys in a Novel Castability DieEaston, M.A., Gibson, M.A., Gershenzon, M., Savage, G., Tyagi, V., Abbott, T.B., Hort, N. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Lueneburg (D), 61-64. - conference lecture (invited): Puerto Vallarta (MEX)Slip and twinning in Mg single crystalsLilleodden, E., Kim, G.S., Sangbong,Y., Huang, Y. (2011)
In: Plasticity 2011, Puerto Vallarta (MEX), - journal articleCastability of some Magnesium Alloys in a Novel Castability DieEaston, M.A., Gibson, M.A., Gershenzon, M., Savage, G., Tyagi, V., Abbott, T.B., Hort, N. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, 61-64. - conference paper: Zeulenroda-Triebes (D)Herstellung und Eigenschaften von partikelverstaerkten keramischen Schichten auf MagnesiumlegierungenBlawert, C., Liang, J., Huang, Y.Hoeche, D. (2011)
In: Tagungsband, 7. Thueringer Grenz- und Oberflaechentage, ThGOT, Zeulenroda-Triebes (D), 106-111. - conference paper: Lueneburg (D)Modeling Bolt Load Retention of Ca Modified AS41 Using Compliance-Creep MethodAnopuo, O., Huang, Y., Hort, N., Kainer, K.U., Maier, P. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Vol. 690, Lueneburg (D), 373-376. - conference lecture: Barcelona (E)Binder development for Magnesium Powder Injection MouldingWolff, M., Wiese, B., Dahms, M., Ebel, T. (2011)
In: International Congress and Exhibition, EURO PM 2011, Barcelona (E), - conference lecture: Dublin (IRL)Factors influencing magnesium corrosion in vitro – environment, proteins and oxygenFeyerabend, F., Yang, L., Tie, D., Laipple, D., Schreyer, A., Kainer, K.U., Hort, N., Druecker, H., Vogt, C., Willumeit, R. (2011)
In: 24th European Conference on Biomaterials, ESB 2011, Dublin (IRL), - conference lecture: Lueneburg (D)Modeling Bolt Load Retention of Ca Modified AS41 Using Compliance-Creep MethodAnopuo, O., Huang, Y., Hort, N., Kainer, K.U., Maier, P. (2011)
In: 5th International Light Metals Technology Conference 2011, Lueneburg (D), - journal articleInfluence of composition on hot tearing in binary Mg‐Zn alloysZhou, L., Huang, Y., Mao, P., Kainer, K.U., Liu, Z., Hort, N. (2011)
In: International Journal of Cast Metals Research, Vol. 24, 3-4, 170-176. - journal articleMechanical and Corrosion Properties of Binary Mg-Dy Alloys for Medical ApplicationYang, L., Huang, Y., Peng, Q., Feyerabend, F., Kainer, K.U., Willumeit, R., Hort, N. (2011)
In: Materials Science and Engineering B, Vol. 176, 20, 1827-1834. - conference lecture: Lueneburg (D)Corrosion Behavior of As-Cast Binary Mg-Dy AlloysYang, L., Feyerabend, F., Kainer, K.U., Willumeit, R., Hort, N. (2011)
In: 5th International Light Metals Technology Conference 2011, Lueneburg (D), - conference paper: Lueneburg (D)Corrosion Behavior of As-Cast Binary Mg-Dy AlloysYang, L., Feyerabend, F., Kainer, K.U., Willumeit, R., Hort, N. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Vol. 690, Lueneburg (D), 417-421. - journal articleCorrosion Behavior of As-Cast Binary Mg-Dy AlloysYang, L., Feyerabend, F., Kainer, K.U., Willumeit, R., Hort, N. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, 417-421. - journal articleStrain induced GdH2 precipitate in Mg-Gd based alloysPeng, Q., Huang, Y., Meng, J., Li, Y., Kainer, K.U. (2011)
In: Intermetallics, Vol. 19, 3, 382-389. - conference lecture (invited): Quebec (CDN)Magnesium corrosion in vitro – towards physiological environmentsFeyerabend, F., Yang, L., Hort, N., Kainer, K.U., Schreyer, A., Vogt, C., Druecker, H., Willumeit, R. (2011)
In: Internationale Conference on Processing & Manufacturing of Advanced Materials, THERMEC 2011, Quebec (CDN), - journal articleMechanism of grain refinement of Mg–Al alloys by SiC inoculationHuang, Y., Kainer, K.U., Hort, N. (2011)
In: Scripta Materialia, Vol. 64, 8, 793-796. - conference lecture: Geesthacht (D)Legierungsentwicklung fuer degradierbare MagnesumimplantateHort, N. (2011)
In: Fizika Tverdogo Tela : FTT, Geesthacht (D), - conference lecture: San Diego, CA (USA)Macrostructure evolution in directionally solidified Mg-RE alloysSalgado-Ordorica, M., Punessen, W., Yi, S., Bohlen, J., Kainer, K.U., Hort, N. (2011)
In: TMS 2011 Annual Meeting & Exhibition, Magnesium Technology, San Diego, CA (USA), - conference paper: San Diego, CA (USA)Investigations on hot tearing of Mg-Zn-(Al) alloysZhou, L., Huang, Y., Mao, P., Kainer, K.U., Liu, Z., Hort, N. (2011)
In: Magnesium Technology 2011, TMS 2011 Annual Meeting & Exhibition, San Diego, CA (USA), 125-130. - conference lecture: San Diego, CA (USA)Investigations on hot tearing of Mg-Zn-(Al) alloysZhou, L., Huang, Y., Mao, P., Kainer, K.U., Liu, Z., Hort, N. (2011)
In: TMS 2011 Annual Meeting & Exhibition, Magnesium Technology, San Diego, CA (USA), - conference lecture: Zeulenroda-Triebes (D)Herstellung und Eigenschaften von partikelverstaerkten keramischen Schichten auf MagnesiumlegierungenBlawert, C., Liang, J., Huang, Y.Hoeche, D. (2011)
In: 7. Thueringer Grenz- und Oberflaechentage, ThGOT, Zeulenroda-Triebes (D), - conference paper: Lueneburg (D)Mechanical behaviour and corrosion performance of thin film magnesium WE alloysSchlueter, K., Reverey, J., Hort, N., Zamponi, C., Quandt, E. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Vol. 690, Lueneburg (D), 286-289. - conference paper: San Diego, CA (USA)Macrostructure evolution in directionally solidified Mg-RE alloysSalgado-Ordorica, M., Punessen, W., Yi, S., Bohlen, J., Kainer, K.U., Hort, N. (2011)
In: Magnesium Technology 2011, TMS 2011 Annual Meeting & Exhibition, San Diego, CA (USA), 113-118. - conference lecture: Jena (D)Physiological corrosion – Towards in vitro setups for degradable metalsFeyerabend, F., Yang, L., Hort, N., Kainer, K.U., Schreyer, A., Vogt, C., Druecker, H., Willumeit, R. (2011)
In: European Symposium on Biomaterials and Related Areas,, EuroBioMat 2011, Jena (D), - journal articleProperties and processing of magnesium-tin-calcium alloysHort, N., Huang, Y.D., Abu Leil, T., Rao, K.P., Kainer, K.U. (2011)
In: Kovove materialy / Metallic materials, Vol. 49, 3, 163-177. - conference poster: Quebec (CDN)Effects of the Heat Treatmenton the Corrosion Behaviorof Mg-Ag Biodegradable AlloysTie, D., Willumeit, R., Feyerabend, F., Hort, N., Kainer, K.U., Mueller, W.D. (2011)
In: Internationale Conference on Processing & Manufacturing of Advanced Materials, THERMEC 2011, Quebec (CDN), - conference lecture: Lueneburg (D)Compression creep at 240°C of extruded magnesium alloys containing GadoliniumDieringa, H., Hort, N., Mueller, S., Kainer, K.U. (2011)
In: 5th International Light Metals Technology Conference 2011, Lueneburg (D), - conference paper: Lueneburg (D)Compression creep at 240°C of extruded magnesium alloys containing GadoliniumDieringa, H., Hort, N., Kainer, K.U. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Lueneburg (D), 270-273. - journal articleImproved cytotoxicity testing of magnesium materialsFischer, J., Proefrock, D., Hort, N., Willumeit, R., Feyerabend, F. (2011)
In: Materials Science and Engineering B, Vol. 176, 11, 830-834. - journal articleCompression creep at 240°C of extruded magnesium alloys containing GadoliniumDieringa, H., Hort, N., Mueller, S., Kainer, K.U. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, 270-273. - journal articleEffect of yttrium addition on lattice parameter, Young's modulus and vacancy of magnesiumPeng, Q., Meng, J., Li, Y., Huang, Y., Hort, N. (2011)
In: Materials Science and Engineering A, Vol. 528, 4-5, 2106-2109. - conference lecture: Lueneburg (D)Mechanical behaviour and corrosion performance of thin film magnesium WE alloysSchlueter, K., Reverey, J., Hort, N., Zamponi, C., Quandt, E. (2011)
In: 5th International Light Metals Technology Conference 2011, Lueneburg (D), - journal articleIn situ studies of light metals with synchrotron radiation and neutronsStaron, P., Beckmann, F., Lippmann, T., Stark, A., Oehring, M., Pyczak, F., Salgado, M, Hort, N., Eckerlebe, H., Kainer, K.U., Mueller, M., Schreyer, A. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, 192-197. - journal articleMechanical behaviour and corrosion performance of thin film magnesium WE alloysSchlueter, K., Reverey, J., Hort, N., Zamponi, C., Quandt, E. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, 286-289. - journal articleCharacterization of calcium-modified zinc phosphate conversion coatings and their influences on corrosion resistance of AZ31 alloyZeng, R., Lan, Z., Kong, L., Huang, Y., Cui, H. (2011)
In: Surface and Coatings Technology, Vol. 205, 11, 3347-3355. - journal articleCorrosion of experimental magnesium alloys in blood and PBS: A gravimetric and microscopic evaluationSchille, C., Braun, M., Wendel, H.P., Scheideler, L., Hort, N., Reichel, H.-P., Schweizer, E., Geis-Gerstorfer, J. (2011)
In: Materials Science and Engineering B, Vol. 176, 20, 1797-1801. - journal articleBlood triggered corrosion of magnesium alloysGeis-Gerstorfer, J., Schille, C., Schweizer, E., Rupp, E., Scheideler, L., Reichel, H.-P., Hort, N., Nolte, A., Wendel, H.P.; (2011)
In: Materials Science and Engineering B, Vol. 176, 20, 1761-1766. - conference lecture: San Diego, CA (USA)Compressive Strength and Hot Deformation Behavior of TX32 Magnesium Alloy with 0.4% Al and 0.4% Si AdditionsRao, K.P., Prasad, Y.V.R.K., Suresh, K., Dharmendra, C., Hort, N., Kainer, K.U. (2011)
In: TMS 2011 Annual Meeting & Exhibition, Magnesium Technology, San Diego, CA (USA), - conference paper: San Diego, CA (USA)Compressive Strength and Hot Deformation Behavior of TX32 Magnesium Alloy with 0.4% Al and 0.4% Si AdditionsRao, K.P., Prasad, Y.V.R.K., Suresh, K., Dharmendra, C., Hort, N., Kainer, K.U. (2011)
In: Magnesium Technology 2011, TMS 2011 Annual Meeting & Exhibition, San Diego, CA (USA), 169-174. - conference lecture (invited): London (GB)Contributions of Alloy Development for Extending the Range of Applications of Magnesium AlloysKainer, K.U., Hort, N. (2011)
In: The John Hunt International Symposium, London (GB), - conference paper: London (GB)Contributions of Alloy Development for Extending the Range of Applications of Magnesium AlloysKainer, K.U., Hort, N. (2011)
In: Proceedings of the John Hunt International Symposium, London (GB), 137-148. - conference paper: Barcelona (E)Binder development for Magnesium Powder Injection MouldingWolff, M., Wiese, B., Dahms, M., Ebel, T. (2011)
In: Proceedings of EURO PM 2011, International Congress and Exhibition, Vol. 2, Barcelona (E), 271-276. - journal articleChemical surface alteration of biodegradable magnesium exposed to corrosion mediaWillumeit, R., Fischer, J., Feyerabend, F., Hort, N., Bismayer, U., Heidrich, S., Mihailova, B. (2011)
In: Acta Biomaterialia, Vol. 7, 6, 2704-2715. - conference lecture: Prag (CZ)Metallurgical Characterization of Hot Tearing Curves Recorded during Solidification of Magnesium AlloysHuang, Y., Wang, Z., Srinivasan, A., Kainer, K.U., Hort, N. (2011)
In: 12th International Symposium on Physics of Materials, ISPMA 12, Prag (CZ), - book partMagnesium Corrosion: A Challenging Concept for Degradable ImplantsWitte, F., Hort, N., Feyerabend, F., Vogt, C. (2011)
In: Corrosion of Magnesium Alloys, 403-425. - lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IIHort, N. (2011)
- lecture: Leuphana Universitaet Lueneburg, FB WirtschaftswissenschaftenEinfuehrung in Werkstoffkunde IHort, N. (2011)
- conference lecture: San Diego, CA (USA)Biodegradable Magnesium Implants - How Do They Corrode in-vivo?Witte, F., Hort, N., Feyerabend, F. (2011)
In: TMS 2011 Annual Meeting & Exhibition, Magnesium Technology, San Diego, CA (USA), - conference lecture: Lueneburg (D)Magnesium Permanent Mold Castings OptimizationElsayed, F.R., Hort, N., Salgado-Ordorica, M., Kainer, K.U. (2011)
In: 5th International Light Metals Technology Conference 2011, Lueneburg (D), - journal articleCompressive strength and hot deformation behavior of TX32 magnesium alloy with 0.4% Al and 0.4% Si additionsRao, K.P., Prasad, Y.V.R.K., Dharmendra, C., Hort, N., Kainer, K.U. (2011)
In: Materials Science and Engineering A, Vol. 528, 22-23, 6964-6970. - conference lecture: Bologna (I)Degradation of magnesium alloys by “physiological” corrosion – setups and influencing factorsFeyerabend, F., Tie, D., Yang, L., Hort, N., Kainer, K.U., Schreyer, A., Vogt, C., Druecker, H., Willumeit, R. (2011)
In: Euromag 2011, Bologna (I), - journal articleMagnesium Permanent Mold Castings OptimizationElsayed, F.R., Hort, N., Salgado-Ordorica, M., Kainer, K.U. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, 65-68. - conference paper: Lueneburg (D)Influence of cerium on the formation of micro-galvanic corrosion elements of AZ91Zander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Groebner, J., Schmid-Fetzer, R. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Vol. 690, Lueneburg (D), 381-384. - journal articleEffect of fetal calf serum on the corrosion behaviour of magnesium alloysHornberger, H., Witte, F., Hort, N., Mueller, W.-D. (2011)
In: Materials Science and Engineering B, Vol. 176, 20, 1746-1755. - conference paper: Lueneburg (D)Magnesium Permanent Mold Castings OptimizationElsayed, F.R., Hort, N., Salgado-Ordorica, M., Kainer, K.U. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Vol. 690, Lueneburg (D), 65-68. - journal articleCyclic deformation of newly developed Magnesium cast alloys in corrosive environmentMaier, P., Anopuo, O, Malchau, F., Wienck, G., Hort, N. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, 495-498. - conference paper: Lueneburg (D)Cyclic deformation of newly developed Magnesium cast alloys in corrosive environmentMaier, P., Anopuo, O, Malchau, F., Wienck, G., Hort, N. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Vol. 690, Lueneburg (D), 495-498. - conference lecture: Lueneburg (D)Cyclic deformation of newly developed Magnesium cast alloys in corrosive environmentMaier, P., Anopuo, O, Malchau, F., Wienck, G., Hort, N. (2011)
In: 5th International Light Metals Technology Conference 2011, Lueneburg (D), - conference object: San Diego, CA (USA)Biodegradable Magnesium Implants - How Do They Corrode in-vivo?Witte, F., Hort, N., Feyerabend, F. (2011)
In: Magnesium Technology 2011, TMS 2011 Annual Meeting & Exhibition, San Diego, CA (USA), 17. - conference lecture: Lueneburg (D)Influence of cerium on the formation of micro-galvanic corrosion elements of AZ91Zander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Groebner, J., Schmid-Fetzer, R. (2011)
In: 5th International Light Metals Technology Conference 2011, Lueneburg (D), - conference paper: Lueneburg (D)In situ studies of light metals with synchrotron radiation and neutronsStaron, P., Beckmann, F., Lippmann, T., Stark, A., Oehring, M., Pyczak, F., Salgado, M, Hort, N., Eckerlebe, H., Kainer, K.U., Mueller, M., Schreyer, A. (2011)
In: Proceedings of the Fifth International Light Metals Technology Conference 2011, Vol. 690, Lueneburg (D), 192-197. - conference lecture: Lueneburg (D)In situ studies of light metals with synchrotron radiation and neutronsStaron, P., Beckmann, F., Lippmann, T., Stark, A., Oehring, M., Pyczak, F., Salgado, M, Hort, N., Eckerlebe, H., Kainer, K.U., Mueller, M., Schreyer, A. (2011)
In: 5th International Light Metals Technology Conference 2011, Lueneburg (D), - journal articleInfluence of cerium on the formation of micro-galvanic corrosion elements of AZ91Zander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Groebner, J., Schmid-Fetzer, R. (2011)
In: Materials Science Forum, Light Metals Technology V, Vol. 690, 381-384.
2010
- conference paper: Seattle, WA (USA)Simulation of Stresses During Casting of Binary Magnesium-Aluminum AlloysPokorny, M.G., Monroe, C.A., Beckermann, C., Zhen, Z., Hort, N. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Seattle, WA (USA), 401-407. - conference lecture: Seattle, WA (USA)Investigations on Microstructure and Properties of Mg-Sn-Ca alloys with 3% Al additionsEl Sayed, F., Abuleil, T., El Aziz, A., Kainer, K.U., Hort, N. (2010)
In: TMS Annual Meeting 2010, Seattle, WA (USA), - conference paper: Seattle, WA (USA)Investigations on Microstructure and Properties of Mg-Sn-Ca alloys with 3% Al additionsEl Sayed, F., Abuleil, T., El Aziz, A., Kainer, K.U., Hort, N. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Seattle, WA (USA), 395-400. - conference lecture: Seattle, WA (USA)Rheological Behaviour of Semi-Solid Mg-Y AlloysPeng, Q., Huang, Y., Hort, N., Kainer, K.U. (2010)
In: TMS Annual Meeting 2010, Seattle, WA (USA), - conference lecture: Seattle, WA (USA)Influence of Cerium on Stress Corrosion Cracking in AZ91DHeilig, M., Zander, D., Olson, D., Mishra, B., Hort, N., Klaus, G., Buehrig-Polaczek, A., Groebner, J., Schmid-Fetzer, R. (2010)
In: TMS Annual Meeting 2010, Seattle, WA (USA), - conference paper: Seattle, WA (USA)Rheological Behaviour of Semi-Solid Mg-Y AlloysPeng, Q., Huang, Y., Hort, N., Kainer, K.U. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Seattle, WA (USA), 329-332. - conference paper: Seattle, WA (USA)Grain Refinement of Mg-Al Alloys by Carbon InoculationHuang, Y., Zheng, X., Liu, B., Anopuo, O., Hort, N., Kainer, K.U., Kim, G.S. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Seattle, WA (USA), 419-424. - conference paper: Seattle, WA (USA)Influence of Cerium on Stress Corrosion Cracking in AZ91DHeilig, M., Zander, D., Olson, D., Mishra, B., Hort, N., Klaus, G., Buehrig-Polaczek, A., Groebner, J., Schmid-Fetzer, R. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Seattle, WA (USA), 305-309. - conference lecture: Seattle, WA (USA)Approaching Bolt Load Retention Behaviour of AS41 Through Compliance and Creep DeformationAnopuo, O., Huang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2010)
In: TMS Annual Meeting 2010, Seattle, WA (USA), - conference paper: Seattle, WA (USA)Approaching Bolt Load Retention Behaviour of AS41 Through Compliance and Creep DeformationAnopuo, O., Huang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Seattle, WA (USA), 215-220. - conference lecture: Seattle, WA (USA)Effect of Aluminum Addition on the Strengthening and High Temperature Deformation Behaviour of Mg-3Sn-2Ca AlloyRao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2010)
In: TMS Annual Meeting 2010, Seattle, WA (USA), - conference paper: Seattle, WA (USA)Effect of Aluminum Addition on the Strengthening and High Temperature Deformation Behaviour of Mg-3Sn-2Ca AlloyRao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Seattle, WA (USA), 201-205. - conference lecture: Seattle, WA (USA)Simulation of Stresses During Casting of Binary Magnesium-Aluminum AlloysPokorny, M.G., Monroe, C.A., Beckermann, C., Zhen, Z., Hort, N. (2010)
In: TMS Annual Meeting 2010, Seattle, WA (USA), - conference paper: Weimar (D)Barium as alloying element for a creep resistant magnesium alloyDieringa, H., Hort, N., Kainer, K.U. (2010)
In: Magnesium, 8th International Conference on Magnesium Alloys and their Applications, Magnesium 2009, Weimar (D), 62-67. - conference lecture: Seattle, WA (USA)Grain Refinement of Mg-Al Alloys by Carbon InoculationHuang, Y., Zheng, X., Liu, B., Anopuo, O., Hort, N., Kainer, K.U., Kim, G.S. (2010)
In: TMS Annual Meeting 2010, Seattle, WA (USA), - conference paper: Seattle, WA (USA)Development of Recyclable Mg-Based Alloys: AZ91D and AZC1231 Phase Information Derived from Heating/Cooling Curve AnalysisGesing, A.J., Reade, N.G., Sokolowski, J.H., Blawert, C., Fechner, D., Hort, N. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Seattle, WA (USA), 97-105. - conference lecture: Seattle, WA (USA)Development of Recyclable Mg-Based Alloys: AZ91D and AZC1231 Phase Information Derived from Heating/Cooling Curve AnalysisGesing, A.J., Reade, N.G., Sokolowski, J.H., Blawert, C., Fechner, D., Hort, N. (2010)
In: TMS Annual Meeting 2010, Seattle, WA (USA), - conference poster: Tampere (FIN)Improved in vitro Testing of Degradable MagnesiumFischer, J., Proefrock, D., Hort, N., Willumeit, R., Kainer, K.U., Schreyer, A., Feyerabend, F. (2010)
In: 23rd European Conference on Biomaterials, ESB 2010, Tampere (FIN), - conference lecture: Seattle, WA (USA)Optimised fatigue behaviour of Ti-6Al-4V alloy components fabricated by MIMLilleodden, E., Kim, G.S., Yi, S., Huang, Y., Fivel, M., Huber, N. (2010)
In: 139th Annual Meeting & Exhibition, TMS 2010, Seattle, WA (USA), - journal articleHigh Temperature Deformation Mechanisms and Processing Map for Hot Working of Cast-Homogenized Mg-3Sn-2Ca AlloyRao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2010)
In: Materials Science Forum, THERMEC 2009, Vol. 638-642, 3616-3621. - journal articleStatus of the Development of Creep Resistant Magnesium Materials for Automotive ApplicationsKainer, K.U., Huang, Y., Dieringa, H., Hort, N. (2010)
In: Materials Science Forum, THERMEC 2009, Vol. 638-642, 73-80. - journal articlePreparation and properties of high purity Mg–Y biomaterialsPeng, Q., Huang, Y., Zhou, L., Hort, N., Kainer, K.U. (2010)
In: Biomaterials, Vol. 31, 3, 398-403. - conference paper: Seattle, WA (USA)Microstructure and corrosion of AZ91 with small amounts of ceriumZander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Groegner, J., Schmid-Fetzer, R. (2010)
In: Magnesium Technology, TMS Annual Meeting 2010, Seattle, WA (USA), 187-191. - journal articleEvaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell linesFeyerabend, F., Fischer, J., Holtz, J., Witte, F., Willumeit, R., Druecker, H., Vogt, C., Hort, N. (2010)
In: Acta Biomaterialia, Vol. 6, 5, 1834-1842. - conference paper: Weimar (D)In Vitro Testing of Magnesium Alloys - Challenges and OptionsFeyerabend, F., Witte, F., Vogt, C., Fischer, J., Schreyer, A., Kainer, K.U., Hort, N., Willumeit, R. (2010)
In: Magnesium, 8th International Conference on Magnesium Alloys and their Applications, Magnesium 2009, Weimar (D), 1156-1161. - conference paper: Weimar (D)Cytotoxic and Immunological Effects of Magnesium Alloy Elements on CellsFischer, J., Feyerabend, F., Hort, N., Kainer, K.U., Schreyer, A., Willumeit, R. (2010)
In: Magnesium, 8th International Conference on Magnesium Alloys and their Applications, Magnesium 2009, Weimar (D), 1175-1181. - journal articleMagnesium alloys as implant materials – Principles of property design for Mg–RE alloysHort, N., Huang, Y., Fechner, D., Stoermer, M., Blawert, C., Witte, F., Vogt, C., Druecker, H., Willumeit, R., Kainer, K.U., Feyerabend, F. (2010)
In: Acta Biomaterialia, Vol. 6, 5, 1714-1725. - journal articleInterference of magnesium corrosion with tetrazolium-based cytotoxicity assaysFischer, J., Prosenc, M.H., Wolff, M., Hort, N., Willumeit, R., Feyerabend, F. (2010)
In: Acta Biomaterialia, Vol. 6, 5, 1813-1823. - conference lecture: Seattle, WA (USA)Microstructure and corrosion of AZ91 with small amounts of ceriumZander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Groegner, J., Schmid-Fetzer, R. (2010)
In: TMS Annual Meeting 2010, Seattle, WA (USA), - journal articleEffect of thermal and mechanical treatments on the hot working response of Mg-3Sn-1Ca alloyPrasad, Y.V.R.K., Rao, K.P., Hort, N., Kainer, K.U. (2010)
In: International Journal of Materials Research, Vol. 101, 2, 300-306. - lecture: Leuphana Universitaet Lueneburg, FB Automatisierungs- und ProduktionstechnikEinfuehrung in Werkstoffkunde IHort, N. (2010)
- conference paper: Florenz (I)Sintering of porous components from ternary Mg-Y-Ca alloys for orthopedic applicationsWolff, M., Fischer, J., Wiese, B., Guelck, T., Willumeit, R., Ebel, T. (2010)
In: Powder Metallurgy, PM 2010, Conference Proceedings, World Congress & Exhibition, Vol. 4, Florenz (I), 755-764. - conference lecture: Eindhoven (NL)Mechanism of Grain Refinement in Mg-Al Alloys with Carbon InoculationsHuang, Y., Zheng, X., Kainer, K.U., Hort, N. (2010)
In: New Frontiers in Light Metals, Proceedings of the 11th International Aluminium Conference INALCO 2010, Eindhoven (NL), 451-459. - conference lecture: Eindhoven (NL)Mechanism of Grain Refinement in Mg-Al Alloys with Carbon InoculationsHuang, Y., Zheng, X., Kainer, K.U., Hort, N. (2010)
In: 11th International Aluminium Conference, INALCO 2010, Eindhoven (NL), - conference lecture: Maratea (I)Corrosion of experimental magnesium alloys in blood and PBS: A gravimetric and microscopic evaluationSchille, C., Braun, M., Wendel, H.P., Scheideler, L., Hort, N., Reichel, H.-P., Schweizer, E., Geis-Gerstorfer, J. (2010)
In: 2nd Symposium on Biodegradable Metals 2010, Maratea (I), - conference lecture: Maratea (I)Blood triggered corrosion of magnesium alloysGeis-Gerstorfer, J., Schille, C., Schweizer, E., Rupp, E., Scheideler, L., Reichel, H.-P., Hort, N., Nolte, A., Wendel, H.P.; (2010)
In: 2nd Symposium on Biodegradable Metals 2010, Maratea (I), - conference poster: Darmstadt (D)XPS studies of magnesium surfaces after exposure to Dulbecco's Modified Eagle Medium, Hank's Buffered Salt Solution, Simulated Body FluidTie, D., Feyerabend, F., Willumeit, R., Hort, N., Hoeche, D. (2010)
In: Materials Science and Engineering, MSE 2010, Darmstadt (D), - lecture: Leuphana Universitaet Lueneburg, FB IngenieurwissenschaftenEinfuehrung in Werkstoffkunde IHort, N. (2010)
- conference paper: Boston, MA (USA)Twining and slip activity in magnesium <11-20> single crystalKim, G.S., Yi, S., Huang, Y., Huber, N., Fivel, M., Lilleodden, E. (2010)
In: Mechanical Behavior at Small Scales - Experiments and Modeling, Symposium Proceedings MRS Fall Meeting 2009, Vol. 1224, Boston, MA (USA), 181-186. - conference lecture: Maratea (I)Mechanical and Corrosion Properties of Binary Mg-Dy Alloys for Medical ApplicationYang, L., Huang, Y., Peng, Q., Feyerabend, F., Kainer, K.U., Willumeit, R., Hort, N. (2010)
In: 2nd Symposium on Biodegradable Metals 2010, Maratea (I), - journal articleXPS studies of magnesium surfaces after exposure to Dulbecco's Modified Eagle Medium, Hank's Buffered Salt Solution and Simulated Body FluidTie, D., Feyerabend, F., Hort, N., Willumeit, R., Hoeche, D. (2010)
In: Advanced Engineering Materials, Vol. 12, 12, B699-B704. - conference lecture: Maratea (I)Bioreactor Test Set Up for in vitro Cytocompatiblity Testing of Magnesium MaterialsFischer, J., Poertner, R., Feyerabend, F., Hort, N., Kainer, K.U., Schreyer, A., Willumeit, R. (2010)
In: 2nd Symposium on Biodegradable Metals 2010, Maratea (I), - journal articleBolt Load Retention and Creep Response of AS41 Alloyed with 0.15 % CaAnopuo, O., Huang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2010)
In: The SAE International Journal of Materials and Manufacturing, Vol. 3, 1, 202-210. - conference lecture: Maratea (I)Effect of fetal calf serum on the corrosion behaviour of magnesium alloysHornberger, H., Witte, F., Hort, N., Mueller, W.-D. (2010)
In: 2nd Symposium on Biodegradable Metals 2010, Maratea (I), - conference lecture: Florence (I)Sintering of porous components from ternary Mg-Y-Ca alloys for orthopedic applicationsWolff, M., Fischer, J., Wiese, B., Guelck, T., Willumeit, R., Ebel, T. (2010)
In: Powder Metallurgy, World Congress and Exhibition PM 2010, Florence (I), - conference lecture: Heilbad Heiligenstadt (D)Magnesium Corrosion in vitro – influence of corrosion media and environmentFeyerabend, F., Fischer, J., Schreyer, A., Druecker, H., Mihailova, B., Hort, N., Kainer, K.U., Willumeit, R. (2010)
In: Jahrestagung der Deutschen Gesellschaft fuer Biomaterialien, DGBM 2010, Heilbad Heiligenstadt (D), - conference lecture: Cairns (AUS)Aluminium-Rich Coring Structures in Mg-Al Alloys with Carbon InoculationHuang, Y., Zheng, X., Anopuo, O., Kim, G.S., Kainer, K.U., Hort, N. (2010)
In: 7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM 7, Cairns (AUS), - journal articleEffect of Minor Additions of Al and Si on the Mechanical Properties of Cast Mg-3Sn-2Ca Alloys in Low Temperature RangeRao, K.P., Suresh, K., Hort, N., Kainer, K.U. (2010)
In: Materials Science Forum, PRICM 7, Vol. 654-656, 635-638. - conference lecture: Cairns (AUS)Effect of Minor Additions of Al and Si on the Mechanical Properties of Cast Mg-3Sn-2Ca Alloys in Low Temperature RangeRao, K.P., Suresh, K., Hort, N., Kainer, K.U. (2010)
In: 7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM 7, Cairns (AUS), - conference lecture: Detroit, MI (USA)Bolt load retention and creep response of AS41 alloyed with 0.15% CaAnopuo, O., Huang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2010)
In: SAE 2010 World Congress & Exhibition, Detroit, MI (USA), - journal articleSimulation of Stresses during Casting of Binary Magnesium-Aluminum AlloysPokorny, M.G., Monroe, C.A., Beckermann, C., Zhen, Z., Hort, N. (2010)
In: Metallurgical and Materials Transactions A, Vol. 41, 12, 3196-3207. - conference paper: Detroit, MI (USA)Bolt load retention and creep response of AS41 alloyed with 0.15% CaAnopuo, O., Huang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2010)
In: Advances In Light Weight Materials – Aluminum, Casting Materials, and Magnesium Technologies, 2010, SAE 2010 World Congress & Exhibition, Vol. SP 2294, Detroit, MI (USA), 0404. - conference lecture (invited): Sinaia (RO)Understanding physiological magnesium corrosion – an in vitro approachFeyerabend, F., Hort, N., Willumeit, R. (2010)
In: 4th International Conference on Biomaterials, Biomaterials & Medical Devices, BiomMedD 2010, Sinaia (RO), - journal articleAluminium-Rich Coring Structures in Mg-Al Alloys with Carbon InoculationHuang, Y., Zheng, X., Anopuo, O., Kim, G.S., Kainer, K.U., Hort, N. (2010)
In: Materials Science Forum, PRICM 7, Vol. 654-656, 675-678. - conference lecture: Regensburg (D)Magnesium als ImplantatwerkstoffHort, N., Feyerabend, F., Kainer, K.U., Willumeit, R., Witte, F. (2010)
In: Implantate - Materialien, Beschichtungen und Anwendungen, Regensburg (D), - conference paper: Bayreuth (D)Magnesium als ImplantatwerkstoffHort, N., Feyerabend, F., Kainer, K.U., Willumeit, R., Witte, F. (2010)
In: Implantate - Materialien, Beschichtungen und Anwendungen, Tagungsband, Bayreuth (D), 163-190.
2009
- conference lecture: San Francisco, CA (USA)Elevated temperature and varied load response of AS41 at bolted jointAnopuo, O., Shen, G., Xu, S., Hort, N., Kainer, K.U. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), - conference paper: San Francisco, CA (USA)Elevated temperature and varied load response of AS41 at bolted jointAnopuo, O., Shen, G., Xu, S., Hort, N., Kainer, K.U. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), 509-514. - conference lecture (invited): Taiyuan (VRC)Development of advanced magnesium cast alloys and technologiesKainer, K.U., Hort, N., Dieringa, H. (2009)
In: IMA 2009 Taiyuan Global Magnesium Conference and Exhibition, Taiyuan (VRC), - conference lecture: Weimar (D)In vitro testing of magnesium alloys – Challenges and optionsFeyerabend, F., Witte, F., Vogt, C., Fischer, J., Schreyer, A., Kainer, K.U., Hort, N., Willumeit, R. (2009)
In: 8th International Conference on Magnesium Alloys and their Applications, Magnesium 2009, Weimar (D), - journal articleMechanical Properties and Corrosion Performance of AZ-Mg Alloy Modified with Ca and SrAnopuo, O., Huang, Y., Dieringa, H., Hort, N., Kainer, K.U., Abdul, K.K. (2009)
In: The SAE International Journal of Materials and Manufacturing, Vol. 1, 1, 103-110. - journal articleMicrostructure and corrosion behavior of Mg-Sn-Ca alloys after extrusionAbu Leil, T., Hort, N., Dietzel, W., Blawert, C., Huang, Y., Kainer, K.U., Rao, K.P. (2009)
In: Transactions of Nonferrous Metals Society of China, Vol. 19, 1, 40-44. - journal articleNumerical Determination of Heat Distribution and Castability Simulations of as Cast Mg - Al AlloysKhan, S., Hort, N., Eiken, J., Steinbach, I., Schmauder, S. (2009)
In: Advanced Engineering Materials, Vol. 11, 3, 162-168. - journal articleNeue Entwicklungen bei der Anwendung von MagnesiumlegierungenDieringa, H., Hort, N., Kainer, K.U. (2009)
In: Praxis der Naturwissenschaften - Chemie in der Schule, Vol. 58, 3, 9-13. - conference lecture (invited): Shenyang (VRC)Magnesium Based Implant MaterialsHort, N., Kainer, K.U., Witte, F., Willumeit, R., Feyerabend, F. (2009)
In: Sino-German Joint Symposium on Advanced Materials and Technology, Shenyang (VRC), - conference lecture (invited): Augsburg (D)Magnesiumm Alloys and Magnesium Based MMCs for Structural Aerospace ApplicationsDieringa, H., Hort, N., Kainer, K.U. (2009)
In: European Conference on Materials and Structures in Aerospace, EUCOMAS 2009, Augsburg (D), - conference lecture: Singapore (SGP)Influence of grain size and artificial ageing on the corrosion of an extruded magnesium alloy ZK60 componentZeng, R., Kainer, K.U., Blawert, C., Dietzel, W., Hort, N. (2009)
In: International Conference on Materials for Advanced Technologies, ICMAT 2009, Singapore (SGP), - conference paper: San Francisco, CA (USA)Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative methodZhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N., Kainer, K.U. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), 105-110. - journal articleMagnesium Recycling: State-of-the-Art Developments, Part IFechner, D., Hort, N., Blawert, C., Dietzel, W., Kainer, K.U. (2009)
In: Light Metal Age, August, 20-24. - conference lecture: San Francisco, CA (USA)On the influence of settling of (ZrB2)p inoculants on grain refinement of magnesium alloys: experiment and theoretical calculationGuenther, R., Hartig, C., Hort, N., Bormann, R. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), - conference paper: San Francisco, CA (USA)Microstructural and mechanical aspects of reinforcement welds for lightweight components produced by friction hydro pillar processingPinheiro, G., dos Santos, J., Hort, N., Kainer, K.U. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), 191-196. - conference lecture: San Francisco, CA (USA)Microstructural and mechanical aspects of reinforcement welds for lightweight components produced by friction hydro pillar processingPinheiro, G., dos Santos, J., Hort, N., Kainer, K.U. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), - conference paper: San Francisco, CA (USA)Magnesium recycling system prepared by permanent mould- and high pressure die castingFechner, D., Hort, N., Kainer, K.U. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), 111-116. - conference lecture: San Francisco, CA (USA)Magnesium recycling system prepared by permanent mould- and high pressure die castingFechner, D., Hort, N., Kainer, K.U. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), - conference lecture (invited): Berlin (D)Status of the Development of Creep Resistant Magnesium Materials for Automotive ApplicationsKainer, K.U., Huang, Y., Hort, N. (2009)
In: International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2009, Berlin (D), - conference lecture (invited): Berlin (D)Challenges of in vitro testing of magnesium alloysFeyerabend, F., Witte, F., Vogt, C., Fischer, J., Willumeit, R., Kainer, K.U., Hort, N. (2009)
In: International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2009, Berlin (D), - conference lecture: San Francisco, CA (USA)Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative methodZhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N., Kainer, K.U. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), - journal articleOptimum parameters and rate-controlling mechanisms for hot working of extruded Mg-3Sn-1Ca alloyPrasad, Y.V.R.K., Rao, K.P., Hort, N., Kainer, K.U. (2009)
In: Materials Science and Engineering A, Vol. 502, 1-2, 25-31. - conference lecture: Lausanne (CH)Rare earth element cytotoxicity and their use for magnesium alloyingFeyerabend, F., Hort, N., Witte, F., Fischer, J., Kainer, K.U., Willumeit, R. (2009)
In: 22nd European Conference on Biomaterials, Lausanne (CH), - journal articleInvestigation of minimum creep rates and stress exponents calculated from tensile and compressive creep data of magnesium alloy AE42Dieringa, H., Hort, N., Kainer, K.U. (2009)
In: Materials Science and Engineering A, Vol. 510-511, 382-386. - journal articleRecycling of magnesium drive train componentsFechner, D., Blawert, C., Hort, N., Kainer, K.U. (2009)
In: Science in China E, Vol. 52, 1, 148-154. - conference paper: San Francisco, CA (USA)On the influence of settling of (ZrB2)p inoculants on grain refinement of magnesium alloys: experiment and theoretical calculationGuenther, R., Hartig, C., Hort, N., Bormann, R. (2009)
In: Magnesium Technology, TMS Annual Meeting 2009, San Francisco, CA (USA), 309-314. - conference lecture: Barcelona (E)Challenges of reliable in vitro testing of magnesium alloysFeyerabend, F., Witte, F., Vogt, C., Fischer, J., Kainer, K.U., Hort, N., Willumeit, R. (2009)
In: 2nd China-Europe Symposium on Biomaterials in Regenerative Medicine, Barcelona (E), - conference lecture: Broadbeach (AUS)Influence of Strontium, Silicon and Calcium Additions on the Properties of the AM50 AlloyFechner, D., Blawert, C., Hort, N., Kainer, K.U. (2009)
In: 4th International Light Metals Technology Conference 2009, Broadbeach (AUS), - lecture: TU Hamburg-Harburg, FB MaschinenbauGrundlagen der WerkstoffwissenschaftenHort, N. (2009)
- journal articleMagnesium Recycling: State-of-the-Art Developments, Part IIFechner, D., Hort, N., Blawert, C., Dietzel, W., Kainer, K.U. (2009)
In: Light Metal Age, Oktober, 34-36. - conference poster: Boston, MA (USA)Twining and slip activity in magnesium <11-20> single crystalKim, G.S., Yi, S., Huang, Y., Huber, N., Fivel, M., Lilleodden, E. (2009)
In: MRS Fall Meeting 2009, Boston, MA (USA), - conference lecture: Berlin (D)High Temperature Deformation Mechanisms and Processing Map for Hot Working of Cast-Homogenized Mg-3Sn-2Ca AlloyRao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2009)
In: International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2009, Berlin (D), - conference lecture (invited): Sendai (J)Magnesium Alloys for the Design of ImplantsKainer, K.U., Hort, N., Willumeit, R., Feyerabend, F., Witte, F. (2009)
In: 18th International Symposium on Processing and Fabrcation of Advanced Materials, PFAM 18, Sendai (J), - conference paper: Sendai (J)Thermodynamic investigations on grain refining mechanisms of Mg-Al alloys inoculated by SiC particlesLiu, B., Huang, Y., Hort, N., Peng, Q., Kainer, K.U., Pan, F. (2009)
In: Processing and Fabrcation of Advanced Materials, Proceedings of 18th International Symposium, PFAM 18, Vol. 1, Sendai (J), 421-430. - conference lecture (invited): Sendai (J)Thermodynamic investigations on grain refining mechanisms of Mg-Al alloys inoculated by SiC particlesLiu, B., Huang, Y., Hort, N., Peng, Q., Kainer, K.U., Pan, F. (2009)
In: 18th International Symposium on Processing and Fabrcation of Advanced Materials, PFAM 18, Sendai (J), - conference lecture: Weimar (D)Barium as alloying element for a creep resistant magnesium alloyDieringa, H., Hort, N., Kainer, K.U. (2009)
In: 8th International Conference on Magnesium Alloys and their Applications, Magnesium 2009, Weimar (D), - conference lecture: Jena (D)In vitro Tests fuer metallische MaterialienFeyerabend, F., Ulmer, J., Hort, N. (2009)
In: DGM-Fachausschuss Biomaterialien, Jena (D), - journal articleInfluence of Strontium, Silicon and Calcium Additions on the Properties of the AM50 AlloyFechner, D., Blawert, C., Hort, N., Kainer, K.U. (2009)
In: Materials Science Forum, Light Metals Technology 2009, Vol. 618-619, 459-462. - conference paper: Sendai (J)Magnesium Alloys for the Design of ImplantsKainer, K.U., Hort, N., Willumeit, R., Feyerabend, F., Witte, F. (2009)
In: Processing and Fabrcation of Advanced Materials, Proceedings of 18th International Symposium, PFAM 18, Vol. 1, Sendai (J), 975-984. - conference lecture: Weimar (D)In Vitro Testing of Magnesium Alloys - Challenges and OptionsFeyerabend, F., Witte, F., Vogt, C., Fischer, J., Schreyer, A., Kainer, K.U., Hort, N., Willumeit, R. (2009)
In: 8th International Conference on Magnesium Alloys and their Applications, Magnesium 2009, Weimar (D), - conference lecture (invited): Berlin (D)Magnesium Alloys as Implant Materials - Principles of Property Design for Mg-RE AlloysHort, N., Huang, Y., fechner, D., Stoermer, M., Blawert, C., Witte, F., Vogt, C., Druecker, H., Willumeit, R., Kainer, K.U., Feyerabend, F. (2009)
In: International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2009, Berlin (D), - conference lecture: Stuttgart (D)Recycling of Magnesium Alloys - State of the ArtFechner, D., Blawert, C., Hort, N., Kainer, K.V. (2009)
In: 17th Magnesium Automotive- und Abnehmerseminar 2009, Stuttgart (D), - conference lecture: Broadbeach (AUS)Quantitative Determination on Hot Tearing in Mg-Al Binary AlloysZhen, Z., Hort, N., Huang, Y., Petri, N., Utke, O., Kainer, K.U. (2009)
In: 4th International Light Metals Technology Conference 2009, Broadbeach (AUS), - journal articleQuantitative Determination on Hot Tearing in Mg-Al Binary AlloysZhen, Z., Hort, N., Huang, Y., Petri, N., Utke, O., Kainer, K.U. (2009)
In: Materials Science Forum, Light Metals Technology 2009, Vol. 618-619, 533-540. - conference lecture: Weimar (D)Cytotoxic and Immunological Effects of Magnesium Alloy Elements on CellsFischer, J., Feyerabend, F., Hort, N., Kainer, K.U., Schreyer, A., Willumeit, R. (2009)
In: 8th International Conference on Magnesium Alloys and their Applications, Magnesium 2009, Weimar (D), - conference paper: Risoe (DK)Nanostructured Magnesium AlloysKainer, K.U., Huang, Y., Peng, Q., Hort, N. (2009)
In: Nanostructured Metals – Fundamentals to Applications, Proceedings of the 30th Risoe International Symposium on Materials Science, Risoe (DK), 81-99. - conference lecture (invited): Risoe (DK)Nanostructured Magnesium AlloysKainer, K.U., Huang, Y., Peng, Q., Hort, N. (2009)
In: 30th Risoe International Symposium on Materials Science: Nanostructured Metals – Fundamentals to Applications, Risoe (DK), - conference lecture: Iasi (RO)Strategies for development and testing of degradable magnesium alloysFeyerabend, F., Fischer, J., Witte, F., Vogt, C., Druecker, H., Schreyer, A., Kainer, K.U., Blawert, C., Hort, N., Willumeit, R. (2009)
In: 12th International Magnesium Symposium, Iasi (RO), - conference lecture: Tuebingen (D)Optimization of in vitro corrosion of magnesium and its alloysWillumeit, R., Fischer, J., Druecker, H., Vogt, C., Kainer, K.U., Schreyer, A., Hort, N., Feyerabend, F. (2009)
In: Jahrestagung der Deutschen Gesellschaft fuer Biomaterialien, DGBM 2009, Tuebingen (D),
2008
- conference lecture: Chongqing (VRC)Corrosion morphologies on the extruded magnesium alloy ZK60 componentZeng, R., Blawert, C., Dietzel, W., Hort, N., Kainer, K.U. (2008)
In: 3rd China-Europe Advanced Materials Symposium, CEAM 3, Chongqing (VRC), - conference lecture: Dudelange (L)Introduction in Magnesium, Thixomolding and Demands of Automotive IndustryKainer, K.U., Dieringe, H., Hort, N. (2008)
In: Husky Metal Molding Day 2008, Dudelange (L), - conference lecture: Nuernberg (D)Microstructural and Mechanical Aspects of Reinforcement Welds for Lightweight Components produced by Friction Hydro Pillar ProcessingPinheiro, G., Hort, N., dos Santos, J., Kainer, K.U. (2008)
In: Materials Science and Engineering, MSE 2008, Nuernberg (D), - conference poster: Porto (P)Biodegradable magnesium alloys for tissue engineering and other biological applications: unexpected findings from a mouse modelYuen, C.K., Hort, N., Ip, W.Y. (2008)
In: TERMIS-EU 2008 Meeting, Porto (P), - conference object: Porto (P)Biodegradable magnesium alloys for tissue engineering and other biological applications: unexpected findings from a mouse modelYuen, C.K., Hort, N., Ip, W.Y. (2008)
In: Proceedings of TERMIS-EU 2008 Meeting, Porto (P), 452. - conference lecture: Nagoya (J)Fluidity of magnesium alloys, an experimental and numerical approachKhan, S., Hort, N., Subasic, E., Schmauder, S. (2008)
In: 10th Asian Foundry Congress, AFC-10, Nagoya (J), - journal articleInfluence of Processing Route on the Properties of Magnesium AlloysFrank, H., Hort, N., Dieringa, H., Kainer, K.U. (2008)
In: Solid State Phenomena, Semi-Solid Processing of Alloys and Composites X, Vol. 141-143, 43-18. - conference lecture: New Orleans, LA (USA)The Role of solutes for Grain Refinement by (SiC)p: Experiment and Theoritical CalculationGuenther, R., Hartig, C., Anopuo, O., Hort, N., Bormann, R. (2008)
In: 2008 TMS Annual Meeting & Exhibition, New Orleans, LA (USA), - conference paper: Nagoya (J)Fluidity of magnesium alloys, an experimental and numerical approachKhan, S., Hort, N., Subasic, E., Schmauder, S. (2008)
In: Proceedings of 10th Asian Foundry Congress, AFC-10, Nagoya (J), 329-334. - conference lecture: New Orleans, LA (USA)Creep and Hot Working Behavior of a new Magnesium Alloy Mg-3Sn-2CaHort, N., Rao, K.P., Abu Leil, T., Dieringa, H., Prasad, V.Y.R.K., Kainer, K.U. (2008)
In: 2008 TMS Annual Meeting & Exhibition, New Orleans, LA (USA), - conference paper: New Orleans, LA (USA)The Role of solutes for Grain Refinement by (SiC)p: Experiment and Theoritical CalculationGuenther, R., Hartig, C., Anopuo, O., Hort, N., Bormann, R. (2008)
In: Magnesium Technology 2008, TMS Annual Meeting & Exhibition, New Orleans, LA (USA), 95-99. - conference lecture: Paris (F)Microstructure and Mechanical properties of AlSi9Cu3 Alloy Based Hybrid CompositesHuang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2008)
In: SAMPE EUROPE 28th International Conference and Forum: Composites Forever, SEICO 08, Paris (F), - conference paper: Chongqing (VRC)Approaches to improve high temperature creep resistance of magnesium alloys by alleviating the segregation of primary alloying elementsHuang, Y., Dieringa, H., Hort, N., Zhen, Z., Kainer, K.U. (2008)
In: China-Europe Collaboration: 3rd China-Europe Advanced Materials Symposium, CEAM 3, Chongqing (VRC), 133-137. - conference lecture: Chongqing (VRC)Approaches to improve high temperature creep resistance of magnesium alloys by alleviating the segregation of primary alloying elementsHuang, Y., Dieringa, H., Hort, N., Zhen, Z., Kainer, K.U. (2008)
In: China-Europe Collaboration: 3rd China-Europe Advanced Materials Symposium, CEAM 3, Chongqing (VRC), - conference paper: Detroit, MI (USA)Mechanical Properties and Corrosion Performance of AZ-Mg Alloy Modified with Ca and SrAnopuo, O., Huang, Y., Dieringa, H., Hort, N., Kainer, K.U., Abdul, K.K. (2008)
In: SAE Technical Paper Series, SAE 2008 World Congress, Detroit, MI (USA), 01-0372. - conference lecture (invited): Chongqing (VRC)Tension and Compression Creep Asymmetry in Magnesium Alloy AE42Kainer, K.U., Dieringa, H., Hort, N. (2008)
In: 3rd China-Europe Advanced Materials Symposium, Chongqing (VRC), - conference paper: Paris (F)Microstructure and Mechanical properties of AlSi9Cu3 Alloy Based Hybrid CompositesHuang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2008)
In: SAMPE EUROPE 28th International Conference and Forum: Composites Forever, SEICO 08, Paris (F), 398-403. - conference lecture: Amsterdam (NL)An in vitro test for corrosion and cytocompatibility of two magnesium alloysFeyerabend, F., Hort, N., Witte, F., Kainer, K.U., Willumeit, R. (2008)
In: 8th World Biomaterials Congress, Amsterdam (NL), - conference lecture: Stuttgart (D)Alloy DevelopmentKainer, K.U., Dieringa, H., Hort, N. (2008)
In: 2nd Annual European Magnesium in Automotive Seminar, Stuttgart (D), - conference lecture: Nuernberg (D)Short term effects of magnesium alloy elements on human cellsFeyerabend, F., Hort, N., Kainer, K.U., Willumeit, R. (2008)
In: Materials Science and Engineering, MSE 2008, Nuernberg (D), - conference lecture: New Orleans, LA (USA)Castability of Magnesium AlloysKhan, S., Hort, N., Steinbach, I., Schmauder, S. (2008)
In: 2008 TMS Annual Meeting & Exhibition, New Orleans, LA (USA), - journal articleEffects of segregation of primary alloying elements on the creep response in magnesium alloysHuang, Y., Dieringa, H., Hort, N., Abu Leil, T., Kainer, K.U., Liu, Y. (2008)
In: Scripta Materialia, Vol. 58, 10, 894-897. - journal articleThree-dimensional microstructural analysis of Mg–Al–Zn alloys by synchrotron-radiation-based microtomographyWitte, F., Fischer, J., Beckmann, F., Stoermer, M., Hort, N. (2008)
In: Scripta Materialia, Vol. 58, 6, 453-456. - conference paper: New Orleans, LA (USA)Creep and Hot Working Behavior of a new Magnesium Alloy Mg-3Sn-2CaHort, N., Rao, K.P., Abu Leil, T., Dieringa, H., Prasad, V.Y.R.K., Kainer, K.U. (2008)
In: Magnesium Technology 2008, TMS Annual Meeting & Exhibition, New Orleans, LA (USA), 401-406. - conference lecture: Detroit, MI (USA)Mechanical Properties and Corrosion Performance of AZ-Mg Alloy Modified with Ca and SrAnopuo, O., Huang, Y., Dieringa, H., Hort, N., Kainer, K.U., Abdul, K.K. (2008)
In: SAE 2008 World Congress, Detroit, MI (USA), - conference paper: New Orleans, LA (USA)Castability of Magnesium AlloysKhan, S., Hort, N., Steinbach, I., Schmauder, S. (2008)
In: Magnesium Technology 2008, TMS Annual Meeting & Exhibition, New Orleans, LA (USA), 197-202. - conference lecture (invited): Worcester, MA (USA)Magnesium Alloys (Die Casting)Kainer, K.U., Zhen, Z., Huang, Y., Hort, N. (2008)
In: International Summer School on High-Integrity Die Castings, Worcester, MA (USA), - journal articleHot working parameters and mechanisms in as-cast Mg-3Sn-1Ca alloyPrasad, Y.V.R.K., Rao, K.P., Hort, N., Kainer, K.U. (2008)
In: Materials Letters, Vol. 62, 26, 4207-4209. - conference lecture: Bayreuth (D)Investigation of minimum creep rates and stress exponents calculated from tensile and compressive creep data of magnesium alloy AE42Dieringa, H., Hort, N., Kainer, K.U. (2008)
In: 11th International Conference on Creep and Fracture of Engineering Materials and Structures, CREEP 2008, Bayreuth (D), - conference lecture: Kiel (D)Magnesium-Werkstoffe fuer medizinische AnwendungenKainer, K.U., Feyerabend, F., Witte, F., Hort, N. (2008)
In: Kolloquium der Technischen Fakultaet der Christian Albrechts Universitaet, Kiel (D), - conference lecture: Hamburg (D)Challenges of in vitro testing of magnesium alloysWillumeit, R., Witte, F., Fischer, J., Hort, N., Kainer, K.U., Feyerabend, F. (2008)
In: Jahrestagung der Deutschen Gesellschaft fuer Biomaterialien, Hamburg (D), - conference lecture: New Delhi (IND)Sophisticated magnesium alloys and composites as implant materialsHort, N., Kainer, K.-U., Witte, F., Feyerabend, F. (2008)
In: 17th International Symposium on Processing and Fabrication of Advance Materials, PFAM XVII, New Delhi (IND), - conference paper: Chongqing (VRC)Corrosion morphologies on the extruded magnesium alloy ZK60 componentZeng, R., Blawert, C., Dietzel, W., Hort, N., Kainer, K.U. (2008)
In: China-Europe Collaboration, 3rd China-Europe Advanced Materials Symposium, CEAM 3, Chongqing (VRC), 150-153. - conference paper: New Delhi (IND)Sophisticated magnesium alloys and composites as implant materialsHort, N., Kainer, K.-U., Witte, F., Feyerabend, F. (2008)
In: Processing and Fabrication of Advance Materials, PFAM XVII, New Delhi (IND), 819-831. - journal articleProgress and Challenge for Magnesium Alloys as BiomaterialsZeng, R., Dietzel, W., Witte, F., Hort, N., Blawert, C. (2008)
In: Advanced Engineering Materials, Vol. 10, 8, B3-B14. - journal articlePhase equilibria, thermodynamics and solidification microstructures of Mg–Sn–Ca alloys, Part 2: Prediction of phase formation in Mg-rich Mg–Sn–Ca cast alloysKozlov, A., Ohno, M., Abu Leil, T., Hort, N., Kainer, K.U., Schmid-Fetzer, R. (2008)
In: Intermetallics, Vol. 16, 2, 316-321. - conference object:Biodegradable magnesium alloys for tissue engineering and other biological applications: Unexpected findings from a mouse modelYuen, C.K., Hort, N., Ip, W.Y. (2008)
In: Tissue Engineering A, Vol. 14, 5, 813. - journal articleHot workability characteristics of cast and homogenized Mg–3Sn–1Ca alloyRao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2008)
In: Journal of Materials Processing Technology, Vol. 201, 1-3, 359-363. - journal articleEvolution of microstructure and hardness of AE42 alloy after heat treatmentsHuang, Y., Dieringa, H., Hort, N., Maier, P., Kainer, K.U., Liu, Y. (2008)
In: Journal of Alloys and Compounds, Vol. 463, 1-2, 238-245. - journal articleLooking to the future: Magnesium powder injection mouldingHort, N., Wolff, M. (2008)
In: Powder Injection Moulding International, Vol. 2, 2, 63-65. - journal articleDegradable biomaterials based on magnesium corrosionWitte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K.U., Willumeit, R., Feyerabend, F. (2008)
In: Current Opinion in Solid State and Materials Science, Vol. 12, 5-6, 63-72.
2007
- journal articleDevelopment of a Magnesium Recycling Alloy Based on AM50Fechner, D., Maier, P., Hort, N., Kainer, K.U. (2007)
In: Materials Science Forum, THERMEC 2006, Vol. 539-543, 108-113. - conference lecture: Orlando, FL (USA)Microstructural Investigations of Mg-Al Alloys Containing Small Amount of SiC NucleantsHuang, Y., Hort, N., Anapuo, O., Kainer, K.U., Vidrich, G., Schiffl, A., Liu, Y. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Orlando, FL (USA), - conference paper: Orlando, FL (USA)Microstructural Investigations of Mg-Al Alloys Containing Small Amount of SiC NucleantsHuang, Y., Hort, N., Anapuo, O., Kainer, K.U., Vidrich, G., Schiffl, A., Liu, Y. (2007)
In: Magnesium Technology 2007, TMS Annual Meeting & Exhibition, Orlando, FL (USA), 421-426. - conference lecture: Orlando, FL (USA)Development of a Magnesium Recycling Alloy Based on the AM Alloy SystemFechner, D., Hort, N., Blawert, C., Kainer, K.U. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Orlando, FL (USA), - conference paper: Orlando, FL (USA)Development of a Magnesium Recycling Alloy Based on the AM Alloy SystemFechner, D., Hort, N., Blawert, C., Kainer, K.U. (2007)
In: Magnesium Technology 2007, TMS Annual Meeting & Exhibition, Orlando, FL (USA), 287-291. - conference paper: Orlando, FL (USA)Threshold Stress during Tensile and Compressive Creep in AE42 Magnesium AlloyDieringa, H., Hort, N., Kainer, K.U. (2007)
In: Magnesium Technology 2007, TMS Annual Meeting & Exhibition, Orlando, FL (USA), 395-400. - conference lecture: Orlando, FL (USA)Threshold Stress during Tensile and Compressive Creep in AE42 Magnesium AlloyDieringa, H., Hort, N., Kainer, K.U. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Orlando, FL (USA), - conference lecture: Orlando, FL (USA)3D Characterization of Beta-Phases AZ91D by Synchrotron-Radiation Based MicrotomographyWitte, F., Fischer, J., Stoermer, M., Hort, N. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Orlando, FL (USA), - conference lecture: Orlando, FL (USA)The Influence of De-Icing Salts on Corrosion of Mg-AlloysAnopuo, O., Hort, N., Huang, Y., Kainer, K.U. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Orlando, FL (USA), - conference paper: Orlando, FL (USA)The Influence of De-Icing Salts on Corrosion of Mg-AlloysAnopuo, O., Hort, N., Huang, Y., Kainer, K.U. (2007)
In: Magnesium Technology 2007, TMS Annual Meeting & Exhibition, Orlando, FL (USA), 439-444. - conference paper: Orlando, FL (USA)Microstructure, Corrosion and Creep of As-Cast Magnesium Alloys Mg-2Sn-2Ca and Mg-4Sn-2CaAbu Leil, T., Rao, K.P., Hort, N., Huang, Y., Blawert, C., Dieringa, H., Kainer, K.U. (2007)
In: Magnesium Technology 2007, TMS Annual Meeting & Exhibition, Orlando, FL (USA), 257-262. - conference paper: Orlando, FL (USA)3D Characterization of Beta-Phases AZ91D by Synchrotron-Radiation Based MicrotomographyWitte, F., Fischer, J., Stoermer, M., Hort, N. (2007)
In: Magnesium Technologiony 2007, TMS Annual Meeting & Exhibit, Orlando, FL (USA), 389-394. - conference lecture: Brighton (GB)Enhanced cytocompatibility of magnesium alloy AZ91D by the addition of hydroxyapatiteFeyerabend, F., Witte, F., Hort, N., Stoermer, M., Kainer, K.U., Willumeit, R. (2007)
In: 21st European Conference on Biomaterials, Brighton (GB), - conference paper: Orlando, FL (USA)Advances in Manufacturing Processes for Magnesium AlloysKainer, K.U., Dieringa, H., Bohlen, J., Hort, N., Letzig, D. (2007)
In: Magnesium Technology 2007, TMS Annual Meeting & Exhibition, Orlando, FL (USA), 3-8. - conference lecture (invited): Orlando, FL (USA)Advances in Manufacturing Processes for Magnesium AlloysKainer, K.U., Dieringa, H., Bohlen, J., Hort, N., Letzig, D. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Orlando, FL (USA), - journal articleHigh Temperature Deformation Behaviour of a New Magnesium AlloyRao, K.P., Prasad, Y.V.R.K., Hort, N., Huang, Y., Kainer, K.U. (2007)
In: Key Engineering Materials, Engineering Plasticity and Its Applications, Vol. 340-341, 89-94. - journal articleBiodegradable magnesium–hydroxyapatite metal matrix compositesWitte, F., Feyerabend, F., Maier, P., Fischer, J., Stoermer, M., Blawert, C., Dietzel, W., Hort, N. (2007)
In: Biomaterials, Vol. 28, 13, 2163-2174. - conference paper: Dresden (D)Production of a Fine-grained Mg Alloy AZ31 with SiC ParticlesVidrich, G., Schiffl, A., Pravdic, F., Ferkel, H., Estrin, Y., Kaufmann, H., Hort, N. (2007)
In: Magnesium, Proceedings of the 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), 1027-1032. - journal articleEffect of Heat Treatment on the Microstructure and Creep Behavior of Mg-Sn-Ca AlloysAbu Leil, T., Huang, Y., Dieringa, H., Hort, N., Kainer, K.U., Bursik, J., Jiraskova, Y., Rao, K.P. (2007)
In: Materials Science Forum, Progress in Light Metals, Aerospace Materials and Superconductors, Vol. 546-549, 69-72. - conference lecture: Orlando, FL (USA)Microstructure, Corrosion and Creep of As-Cast Magnesium Alloys Mg-2Sn-2Ca and Mg-4Sn-2CaAbu Leil, T., Rao, K.P., Hort, N., Huang, Y., Blawert, C., Dieringa, H., Kainer, K.U. (2007)
In: 2007 TMS Annual Meeting & Exhibition, Orlando, FL (USA), - conference paper: Dresden (D)Effect of Heat-Treatment on the Microstructure, Microhardness and Corrosion of Cast Mg-3Sn-2Ca AlloyBursik, J., Zabransky, K., Jiraskova, Y., Bursikova, V., Abu Leil, T., Blawert, C., Huang, Y., Dietzel, W., Hort, N., Kainer, K.U., Rao, K.P. (2007)
In: Magnesium, Proceedings of the 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), 49-54. - conference paper: Dresden (D)Development of an AM50 Based Magnesium Recycling AlloyFechner, D., Blawert, C., Maier, P., Hort, N., Kainer, K.U. (2007)
In: Magnesium, Proceedings of the 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), 262-267. - conference paper: Dresden (D)Rolling of AM50 Magnesium Cast AlloyGoeken, J., Stulikova, I., Smola, B., Steinhoff, K., Hort, N., Ocenasek, V. (2007)
In: Magnesium, Proceedings of the 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), 620-626. - conference paper: Dresden (D)In Mould Heating of Continuous Carbon Fibre Preforms for Reinforced High Pressure Die Casting Magnesium PartsOberschelp, C., Klaus, G., Buehring-Polaczek, A., Werner, J., Langkamp, A., Hufenbach, W., Hort, N., Dieringa, H., Kainer, K.U. (2007)
In: Magnesium, Proceedings of the 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), 929-934. - conference paper: Dresden (D)Magnesium-Hydroxyapatite Composites as an Approach to Degradable BiomaterialsWitte, F., Fischer, J., Maier, P., Blawert, C., Stoermer, M., Hort, N. (2007)
In: Magnesium, Proceedings of the 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), 958-964. - journal articleEffect of Microstructural Inhomogeneity on Creep Response of Mg-Sn AlloysHuang, Y., Hort, N., Abu Leil, T., Kainer, K.U., Liu, Y. (2007)
In: Key Engineering Materials, The Mechanical Behavior of Materials X, Vol. 345-346, 561-564. - conference lecture: Leipzig (D)In vitro corrosion and cytocompatibility of two magnesium alloysFeyerabend, F., Hort, N., Witte, F., Kainer, K.U., Willumeit, R. (2007)
In: 3rd World Congress on Regenerative Medicine, Leipzig (D), - journal articleCreep behavior of AE42 based hybrid compositesArunachaleswaran, A., Pereira, I., Dieringa, H., Huang, Y., Hort, N., Dhindaw, B.K., Kainer, K.U. (2007)
In: Materials Science and Engineering A, Vol. 460-461, 268-276. - conference lecture (invited): Singapore (SGP)Magnesium Materials for Transportation IndustriesKainer, K.U., Dieringa, H., Hort, N. (2007)
In: 16th International Symposium of Processing and Fabrication of Advanced Materials, PFAM 16, Singapore (SGP), - lecture: FH Luebeck, FB Angewandte Naturwissenschaften, Biomedical EngineeringMaterials SciencesHort, N. (2007)
- conference lecture: Nuernberg (D)Magnesium-Steel Joints Produced by Friction Stir WeldingWeis Olea, C.A., Glatz, A., Hort, N., Sheikhi, S., dos Santos, J.F. (2007)
In: EUROMAT 2007, Nuernberg (D), - conference poster: Paris (F)Numerical Determination of Heat Distribution and Castability Simulations of as-cast Mg-Al alloysKhan, S.S., Hort, N., Steinbach, I., Schmauder, S., Weber, U. (2007)
In: 17th International Workshop on Computational Mechanics of Materials, Paris (F), - conference object: Paris (F)Numerical Determination of Heat Distribution and Castability Simulations of as-cast Mg-Al alloysKhan, S.S., Hort, N., Steinbach, I., Schmauder, S., Weber, U. (2007)
In: IWCMM 17 - Book of Abstracts, 17th International Workshop on Computational Mechanics of Materials, Paris (F), 218. - conference poster: Eindhoven (NL)Microstructure evolution simulation of magnesium/aluminium alloysKhan, S., Eiken, J., Hort, N., Steinbach, I., Schmauder, S. (2007)
In: Multi-scale plasticity of crystalline materials, Symposium, Eindhoven (NL), - conference poster: Neuchatel (CH)Microtomography on Biomatirials using the HARWI-2 Beamline at DESYHerzen, J., Beckmann, F., Mueller, B., Witte, F., Donath, T., Leukers, B., Irsen, S.H., Stoermer, M., Hort, N., Schrott-Fischer, A., Glueckert, R., Schreyer, A. (2007)
In: 13th Swiss Conference on Biomaterials, Neuchatel (CH), - conference paper: Chongqing (VRC)Properties and Processing of New Magnesium-Tin-Calcium Alloys for Powertrain and Hand Tool ApplicationsKainer, K.U., Rao, K.P., Huang, Y., Abu Leil, T., Hort, N. (2007)
In: 2007 China Magnesium and Automotive Conference, Chongqing (VRC), 228-251. - conference lecture: Chongqing (VRC)Properties and Processing of New Magnesium-Tin-Calcium Alloys for Powertrain and Hand Tool ApplicationsKainer, K.U., Rao, K.P., Huang, Y., Abu Leil, T., Hort, N. (2007)
In: 2007 China Magnesium and Automotive Conference, Chongqing (VRC), - conference paper: Singapore (SGP)Comparison of tensile and compressive creep data of AE42 magnesium alloy and its short fiber compositeDieringa, H., Hort, N., Kainer, K.U. (2007)
In: Processing and Fabrication of Advanced Materials, 16th International Conference, Singapore (SGP), 248-255. - conference lecture: Singapore (SGP)Comparison of tensile and compressive creep data of AE42 magnesium alloy and its short fiber compositeDieringa, H., Hort, N., Kainer, K.U. (2007)
In: 16th International Conference on Processing and Fabrication of Advanced Materials, Singapore (SGP), - conference paper: Dresden (D)Microstructure and Micromechanical Properties of as-cast Mg-Sn-Ca and Mg-Sn-Mn AlloysBursik, J., Bursikova, V., Jiraskova, Y., Abu Leil, T., Blawert, C., Dietzel, W., Hort, N., Kainer, K.U. (2007)
In: Magnesium, Proceedings of the 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), 37-42. - journal articleIn vitro corrosion and cytocompatibility of two magnesium alloysFeyerabend, F., Hort, N., Witte, F., Kainer, K.U., Willumeit, R. (2007)
In: Regenerative Medicine, Vol. 2, 5, 612. - journal articleElectrochemical behavior of magnesium alloys in simulated body fluidsZeng, R., Chen, J., Dietzel, W., Hort, N., Kainer, K.U. (2007)
In: Transactions of Nonferrous Metals Society of China, Vol. 17, s166-s170. - journal articleMicrostructure Characterisation and creep properties of AE42 based hybrid composites prepared by squeeze casting processArunachaleswaran, A., Dhindhaw, B.K., Dieringa, H., Hort, N., Kainer, K.U. (2007)
In: Transactions of the Indian Institute of Metals, Vol. 60, 2-3, 87-91. - conference lecture: Nuernberg (D)Creep rates and stress exponents of unreinforced and short fiber reinforced magnesium alloy AE42Dieringa, H., Huang, Y., Hort, N., Kainer, K.U. (2007)
In: EUROMAT 2007, Nuernberg (D), - conference lecture: Hannover (D)Erhoehung der Zellvertraeglichkeit der Magnesiumlegierung AZ91D durch die Zugabe von Hydroxylapatit - Enhanced cytocompatibility of magnesium alloy AZ91D by the addition of hydroxyapatiteFeyerabend, F., Witte, F., Hort, N., Willumeit, R., Kainer, K.U. (2007)
In: Jahrestagung der Deutschen Gesellschaft fuer Biomaterialien, Hannover (D), - journal articleFestigkeit degradierbare Biowerkstoffe auf der Basis von Magnesium-Hydroxylapatit-Verbundwerkstoffen - Strength of degradable biomaterials based on Magnesium Hydroxy Apatite CompositesHort, N., Witte, F., Feyerabend, F., Willumeit, R., Kainer, K.U. (2007)
In: Biomaterialien, Vol. 8, 3, 235. - journal articleMicrotomography on Biomaterials using the HARWI-2 beamline at DESYHerzen, J., Beckmann, F., Mueller, B., Witte, F., Donath, T., Leukers, B., Irsen, S.H., Stoermer, M., Hort, N., Schrott-Fischer, A., Glueckert, R., Schreyer, A. (2007)
In: European Cells and Materials, Vol. 13, 3, 38. - conference lecture (invited): Trivandrum (IND)Minimum creep rates and calculated stress exponents compared in tensile and compressive creep of Saffil short fiber reinforced magnesium alloy AE42Dieringa, H., Hort, N., Kainer, K.U. (2007)
In: International Conference on Advanced Materials and Composites, ICAMC 2007, Trivandrum (IND), - conference paper: Trivandrum (IND)Minimum creep rates and calculated stress exponents compared in tensile and compressive creep of Saffil short fiber reinforced magnesium alloy AE42Dieringa, H., Hort, N., Kainer, K.U. (2007)
In: International Conference on Advanced Materials and Composites, ICAMC 2007, Trivandrum (IND), - journal articleErhoehung der Zellvertraeglichkeit der Magnesiumlegierung AZ91D durch die Zugabe von Hydroxylapatit - Enhanced cytocompatibility of magnesium alloy AZ91D by the addition of hydroxyapatiteFeyerabend, F., Witte, F., Hort, N., Kainer, K.U., Willumeit, R. (2007)
In: Biomaterialien, Vol. 8, 3, 179.
2006
- conference lecture (invited): Kharagpur (IND)Magnesium Wrought Alloys Produced by Spray FormingKainer, K.U., Hort, N. (2006)
In: International Conference on Advances in Materials and Materials Processing, ICAMMP 2006, Kharagpur (IND), - conference lecture (invited): Montreal (CDN)The Use of Magnesium Alloys: Past, Present and FutureKainer, K.U., Dieringa, H., Dietzel, W., Hort, N., Blawert, C. (2006)
In: Conference of Metallurgists, COM 2006, Montreal (CDN), - conference lecture: Aalen (D)Creep rates of tensile and compressive creep of magnesium alloy AE42 as a consequence of different twinning behaviourDieringa, H., Hort, N., Maier, P., Kainer, K.U. (2006)
In: 14th Magnesium Automotive and End User Seminar, Aalen (D), - conference lecture: San Antonio, TX (USA)Effects of Interfacial Reactions During Solidification Process on Mechanical Properties in Short Fiber Reinforced AlSi12CuMgNi CompositesHuang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2006)
In: TMS 2006: The Rohatgi Honorary Symposium on Solidification Processing of Metal Matrix Composites, San Antonio, TX (USA), - conference poster: Berlin (D)Untersuchungen zum Korrosions- und Kriechverhalten von Mg-Sn-Ca-Legierungen fuer den HochtemperatureinsatzAbu Leil, T., Hort, N., Blawert, C., Huang, Y., Dieringa, H., Kainer, K.U. (2006)
In: DGM-Tag 2006, Berlin (D), - conference lecture: San Antonio, TX (USA)Corrosion Behavior and Microstructure of a Broad Range of Mg-SnX AlloysAbu Leil, T., Hort, N., Blawert, C., Kainer, K.U., Rao, P.P. (2006)
In: 2006 TMS Annual Meeting, San Antonio, TX (USA), - conference lecture: Montreal (CDN)Development and characterization of a series of Mg-Sn-Ca alloysAbu Leil, T., Rao, K.P., Hort, N., Dieringa, H., Blawert, C., Huang, Y., Kainer, K.U. (2006)
In: International Symposium on Magnesium Technology in the Global Age, Montreal (CDN), - conference poster: Lausanne (CH)Characterization of a new series of Mg-Sn-Ca alloysAbu Leil, T., Hort, N., Dieringa, H., Blawert, C., Huang, Y., Kainer, K.U., Rao, K.P. (2006)
In: Junior EuroMat 2006, Lausanne (CH), - book partMagnesium Matrix CompositesHort, N., Dieringa, H., Thakur, S.K., Kainer, K.U. (2006)
In: Magnesium Technology, Metallurgy, Design Data, Applications, 315-334. - conference lecture: Beijing (VRC)Effect of Heat Treatment on the Microstructure and Creep Behavior of Mg-Sn-Ca AlloysAbu Leil, T., Huang, Y., Dieringa, H., Hort, N., Kainer, K.U., Bursik, J., Jiraskova, Y., Rao, K.P. (2006)
In: 2006 Beijing International Materials Week, Beijing (VRC), - conference lecture: Dresden (D)Microstructure and Micromechanical Properties of as-cast Mg-Sn-Ca and Mg-Sn-Mn AlloysBursik, J., Bursikova, V., Jiraskova, Y., Abu Leil, T., Blawert, C., Dietzel, W., Hort, N., Kainer, K.U. (2006)
In: 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), - conference lecture: San Antonio, TX (USA)Machining of hybrid reinforced Mg-MMCs using abrasive water jettingAust, E., Elsaesser, M., Hort, N., Limberg, W. (2006)
In: 2006 TMS Annual Meeting & Exhibition, San Antonio, TX (USA), - conference poster: Dresden (D)Effect of Heat-Treatment on the Microstructure, Microhardness and Corrosion of Cast Mg-3Sn-2Ca AlloyBursik, J., Zabransky, K., Jiraskova, Y., Bursikova, V., Abu Leil, T., Blawert, C., Huang, Y., Dietzel, W., Hort, N., Kainer, K.U., Rao, K.P. (2006)
In: 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), - journal articleIntermetallics in the Magnesium AlloysHort, N., Huang, Y., Kainer, K.U. (2006)
In: Advanced Engineering Materials, Vol. 8, 4, 235-240. - conference paper: Aalen (D)Creep rates of tensile and compressive creep of magnesium alloy AE42 as a consequence of different twinning behaviourDieringa, H., Hort, N., Maier, P., Kainer, K.U. (2006)
In: 14th Magnesium Automotive and End User Seminar, Aalen (D), - conference lecture: Nagoya (J)High Temperature Deformation Behaviour of a New Magnesium AlloyRao, K.P., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2006)
In: 8th Asia Pacific Symposium on Engineering Plasticity and its Applications, AEPA 2006, Nagoya (J), - conference paper: San Antonio, TX (USA)Effects of Interfacial Reactions During Solidification Process on Mechanical Properties in Short Fiber Reinforced AlSi12CuMgNi CompositesHuang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2006)
In: TMS 2006: The Rohatgi Honorary Symposium on Solidification Processing of Metal Matrix Composites, San Antonio, TX (USA), 165-172. - conference lecture: Opio (F)Creep resistant magnesium alloys for power train applicationsFrank, H., Dieringa, H., Hort, N., Kainer, K.U. (2006)
In: MCWASP Conference, Modeling of Casting, Welding and Advanced Soldification Processes XI, Opio (F), - book partPowder Metallurgically manufactured Metal Matrix CompositesHort, N., Kainer, K.U. (2006)
In: Metal Matrix Composites, 243-276. - conference paper: Opio (F)The Influence of the Casting Process on the Creep Properties of Different AZ-Based Magnesium AlloysFrank, H., Dieringa, H., Hort, N., Kainer, K.U. (2006)
In: Modeling of Casting, Welding and Advanced Soldification Processes-XI, MCWASP Conference, Opio (F), 669-676. - conference paper: Montreal (CDN)The Use of Magnesium Alloys: Past, Present and FutureKainer, K.U., Dieringa, H., Dietzel, W., Hort, N., Blawert, C. (2006)
In: Magnesium Technology in the Global Age, Conference of Metallurgists, COM 2006, Montreal (CDN), 3-19. - conference lecture: Dresden (D)Rolling of AM50 Magnesium Cast AlloyGoeken, J., Stulikova, I., Smola, B., Steinhoff, K., Hort, N., Ocenasek, V. (2006)
In: 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), - book partMagnesiumKainer, K.U., Hort, N., Blawert, C., Dietzel, W., Letzig, D., Stoessel, R.-P., Swiostek, J. (2006)
In: Winnacker-Kuechler: Chemische Technik - Metalle und Metallverbindungen - Prozesse und Produkte, Metalle, Vol. 6a, 567-608. - conference paper: Montreal (CDN)Development and characterization of a series of Mg-Sn-Ca alloysAbu Leil, T., Rao, K.P., Hort, N., Dieringa, H., Blawert, C., Huang, Y., Kainer, K.U. (2006)
In: Magnesium Technology in the Global Age, Conference of Metallurgists, COM 2006, Montreal (CDN), 739-749. - journal articleInvestigations on thermal fatigue of aluminium-and magnesium-alloy based compositesHuang, Y., Hort, N., Dieringa, H., Maier, P., Kainer, K.U. (2006)
In: International Journal of Fatigue, Vol. 28, 10, 1399-1405. - journal articleEnhancement of Workability in AZ31 alloy - Processing maps: Part 1, Cast materialDzwonczyk, J., Prasad, Y.V.R.K., Hort, N., Kainer, K.U. (2006)
In: Advanced Engineering Materials, Vol. 8, 10, 966-973. - journal articleMicrostructural Investigations of the Mg-Sn-xCa SystemHort, N., Huang, Y., Abu Leil, T., Maier, P., Kainer, K.U. (2006)
In: Advanced Engineering Materials, Vol. 8, 5, 359-364. - conference lecture: Dresden (D)Development of an AM50 Based Magnesium Recycling AlloyFechner, D., Blawert, C., Maier, P., Hort, N., Kainer, K.U. (2006)
In: 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), - conference lecture: San Antonio, TX (USA)Microstructure and Thermal Response of Mg-Sn AlloysAnopuo, O., Huang, Y., Blawert, C., Hort, N., Kainer, K.U. (2006)
In: TMS Annual Meeting 2006, San Antonio, TX (USA), - conference lecture: Dresden (D)In Mould Heating of Continuous Carbon Fibre Preforms for Reinforced High Pressure Die Casting Magnesium PartsOberschelp, C., Klaus, G., Buehring-Polaczek, A., Werner, J., Langkamp, A., Hufenbach, W., Hort, N., Dieringa, H., Kainer, K.U. (2006)
In: 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), - conference lecture: Dresden (D)Production of a Fine-grained Mg Alloy AZ31 with SiC ParticlesVidrich, G., Schiffl, A., Pravdic, F., Ferkel, H., Estrin, Y., Kaufmann, H., Hort, N. (2006)
In: 7th International Conference on Magnesium Alloys and their Applications, Dresden (D), - conference lecture: Vancouver (CDN)Development of a Magnesium Recycling Alloy Based on AM50Fechner, D., Maier, P., Hort, N., Kainer, K.U. (2006)
In: International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2006, Vancouver (CDN), - conference poster: Lausanne (CH)Magnesium Recycling Alloy Based on Automotive Post Consumer ScrapFechner, D., Blawert, C., Maier, P., Hort, N., Kainer, K.U. (2006)
In: Junior EuroMat 2006, Lausanne (CH), - conference poster: Lausanne (CH)A Comparative investigation of the bolt load retention behaviour of some selected Mg-alloysAnopuo, O., Dieringa, H., Huang, Y., Meier, P., Hort, N., Kainer, K.U. (2006)
In: Junior EuroMat 2006, Lausanne (CH), - conference paper: San Antonio, TX (USA)Microstructure and Thermal Response of Mg-Sn AlloysAnopuo, O., Huang, Y., Blawert, C., Hort, N., Kainer, K.U. (2006)
In: Magnesium Technology 2006, TMS Annual Meeting, San Antonio, TX (USA), 529-534. - conference lecture: Dresden (D)Magnesium-Hydroxyapatite Composites as an Approach to Degradable BiomaterialsWitte, F., Fischer, J., Maier, P., Blawert, C., Stoermer, M., Hort, N. (2006)
In: 7th International Conference on Magnesium Alloys and their Applications, Dresden (D),
2005
- journal articleMicrostructural Development in Tension and Compression Creep of Magnesium Alloy AE42Dieringa, H., Bowles, A., Hort, N., Kainer, K.U. (2005)
In: Materials Science Forum, Materials Structure & Micromechanics of Fracture, Vol. 482, 271-274. - conference lecture: Hamburg (D)Magnesium - Probleme, Anwendungen, PotenzialeHort, N., Kainer, K.U. (2005)
In: VDI - AK Werkstofftechnik, Hamburg (D), - conference lecture: Koeln (D)Recycling von Magnesium - Stand der Technik, Probleme, LoesungsansaetzeHort, N., Fechner, D., Kainer, K.U. (2005)
In: Autorecycling in Europa - Car Recycling in Europe, Koeln (D), - conference paper: St. Wolfgang (A)Assessment of AZ31 for wrought processingHort, N., Dzwonczyk, J., Kainer, K.U. (2005)
In: Proceedings of the 2nd International Light Metals Technology Conference 2005, St. Wolfgang (A), 143-148. - conference lecture: St. Wolfgang (A)Assessment of AZ31 for wrought processingHort, N., Dzwonczyk, J., Kainer, K.U. (2005)
In: 2nd International Light Metals Technology Conference 2005, St. Wolfgang (A), - conference lecture: Geesthacht (D)Faserverstaerkte Magnesiumlegierungen - Einfluss der Grenzflaechen auf die mechanischen EigenschaftenDieringa, H., Hort, N., Kainer, K.U. (2005)
In: Grenzflaechen in mehrphasigen Werkstoffen, Workshop der ISH-Initiative Oberflaechentechnik, Geesthacht (D), - journal articleInvestigations in the Magnesium-Tin systemBowles, A., Dieringa, H., Blawert, C., Hort, N., Kainer, K.U. (2005)
In: Materials Science Forum, Magnesium – Science, Technology and Applications, Vol. 488-489, 135-138. - conference paper: Kassel (D)Mechanical Properties of Short Fiber Reinforced AlSi12CuMgNi Piston Alloys Before and After Dynamic Thermal CyclingHort, N., Huang, Y., Dieringa, H., Kainer, K.U. (2005)
In: Verbundwerkstoffe und Werkstoffverbunde, Kassel (D), 563-563. - journal articleMicrostructural investigations of interfaces in short fiber reinforced AlSi12CuMgNi compositesHuang, Y., Hort, N., Dieringa, H., Kainer, K.U., Liu, Y. (2005)
In: Acta Materialia, Vol. 53, 14, 3913-3923. - conference paper: Kassel (D)Interfacial reaction in the short-fiber reinforced AlSi12CuMgNi piston alloysHuang, Y., Hort, N., Dieringa, H., Kainer, K.U., Liu, Y. (2005)
In: Verbundwerkstoffe und Werkstoffverbunde, Kassel (D), 33-38. - conference lecture: Bremen (D)Herstellung und Eigenschaften von Magnesium-BauteilenKainer, K.U., Hort, N. (2005)
In: Leichtbau mit metallischen Werkstoffen, VDI-Wissensforum Seminar, Bremen (D), - conference paper: San Francisco, CA (USA)Corrosion properties of secondary AZ91 alloysBlawert, C., Morales, E., Dietzel, W., Hort, N., Kainer, K.U., Scharf, C., Ditze, A., Endres, F. (2005)
In: Magnesium Technology 2005, TMS 2005, 134th Annual Meeting & Exhibition, San Francisco, CA (USA), 447-450. - journal articleThermal cycling and creep studies of AM50+Nd magnesium alloy based carbon fiber, SiC particulate and in-situ Mg2Si reinforced habrid compositesThakur, S., Dieringa, H., Dhindaw, B.K., Hort, N., Kainer, K.U. (2005)
In: Transactions of the Indian Institute of Metals, Vol. 58, 4, 653-659. - conference poster: San Francisco, CA (USA)Tensile and compressive creep behavior of Al2O3 (Saffil)-short fiber reinforced magnesium alloy AE42Dieringa, H., Huang, Y., Maier, P., Hort, N., Kainer, K.U. (2005)
In: TMS 2005, Magnesium Technology, San Francisco, CA (USA), - conference lecture: Durban (ZA)Creep and microstructure of hybrid reinforced magnesium alloy AE42Dieringa, H., Pereira, I.M., Hort, N., Kainer, K.U. (2005)
In: Fifteenth International Conference on Composite Materials, ICCM 15, Durban (ZA), - conference lecture: San Francisco, CA (USA)Corrosion properties of secondary AZ91 alloysBlawert, C., Morales, E., Dietzel, W., Hort, N., Kainer, K.U., Scharf, C., Ditze, A., Endres, F. (2005)
In: TMS 2005, 134th Annual Meeting & Exhibition, San Francisco, CA (USA), - conference poster: St. Wolfgang (A)Project: Development of a Magnesium Recycling alloyFechner, D., Hort, N., Kainer, K.U. (2005)
In: 2nd International Light Metals Technology Conference 2005, St. Wolfgang (A), - journal articleRecycling von Magnesium: Stand der Technik, Probleme und LoesungenHort, N., Fechner, D., Kainer, K.U. (2005)
In: Recycling Magazin, Vol. 60, 16, 14-17. - conference paper: Durban (ZA)Creep and microstructure of hybrid reinforced magnesium alloy AE42Dieringa, H., Pereira, I.M., Hort, N., Kainer, K.U. (2005)
In: Fifteenth International Conference on Composite Materials, Extended Abstracts, ICCM 15, Durban (ZA), 513-514. - conference paper: Bad Nauheim (D)Legierungs- und Verfahrensentwicklung fuer Mg-Bauteile im AutomobilbauHort, N., Kainer, K.U. (2005)
In: Schluesseltechnologie Leichtmetallguss im Automobilbau, Bad Nauheim (D), 25-49. - journal articleTensile and compressive creep behaviour of Al2O3 (Saffil) short fiber reinforced magnesium alloy AE42Dieringa, H., Huang, Y., Maier, P., Hort, N., Kainer, K.U. (2005)
In: Materials Science and Engineering A, Vol. 410-411, 85-88. - journal articleHot tearing of magnesium alloysHort, N., Dieringa, H., Kainer, K.U. (2005)
In: Transactions of the Indian Institute of Metals, Vol. 58, 4, 703-708. - conference lecture: Kassel (D)Mechanical Properties of Short Fiber Reinforced AlSi12CuMgNi Piston Alloys Before and After Dynamic Thermal CyclingHort, N., Huang, Y., Dieringa, H., Kainer, K.U. (2005)
In: 15. Symposium, Verbundwerkstoffe und Werkstoffverbunde, Kassel (D), - conference lecture: Geesthacht (D)Warmfeste Mg-WerkstoffeHort, N., Dieringa, H. (2005)
In: DGM Fortbildungsseminar Magnesium, Geesthacht (D), - journal articleA Critical Review of the Stress Corrosion Cracking (SCC) of Magnesium AlloysWinzer, N., Atrens, A., Song, G., Ghali, E., Dietzel, W., Kainer, K.U., Hort, N., Blawert, C. (2005)
In: Advanced Engineering Materials, Vol. 7, 8, 659-693. - journal articleAnalysis of instantaneous thermal expansion coefficient curve during thermal cycling in short fiber reinforced AlSi12CuMgNi compositesHuang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2005)
In: Composites Science and Technology, Vol. 65, 1, 137-147. - conference paper: Kassel (D)Mechanical Properties of Short Fiber Reinforced AlSi12CuMgNi Piston Alloys Before and After Dynamic Thermal CyclingHort, N., Huang, Y., Dieringa, H., Kainer, K.U. (2005)
In: Verbundwerkstoffe und Werkstoffverbunde, 15. Symposium, Kassel (D), 563-568. - conference lecture: Bad Nauheim (D)Legierungs- und Verfahrensentwicklung fuer Mg-Bauteile im AutomobilbauHort, N., Kainer, K.U. (2005)
In: Schluesseltechnologie Leichtmetallguss im Automobilbau, Bad Nauheim (D), - conference poster: Prag (CZ)Effect of Alloy Composition on Microstructure in Mg-Sn AlloysHuang, Y., Abu Leil, T., Hort, N., Kainer, K.U. (2005)
In: EUROMAT 2005, Prag (CZ), - conference poster: Kassel (D)Interfacial reaction in the short-fiber reinforced AlSi12CuMgNi piston alloysHuang, Y., Hort, N., Dieringa, H., Kainer, K.U., Liu, Y. (2005)
In: 15. Symposium, Verbundwerkstoffe und Werkstoffverbunde, Kassel (D), - reportMATALEND, Werkstoff- und Verfahrenstechnik fuer das Metallspritzgiessen von neuen kriechbestaendigen MagnesiumlegierungenFrank, H., Hort, N., Kainer, K.U. (2005)
- conference poster: Kassel (D)Mechanical Properties of Short Fiber Reinforced AlSi12CuMgNi Piston Alloys Before and After Dynamic Thermal CyclingHort, N., Huang, Y., Dieringa, H., Kainer, K.U. (2005)
In: 15. Symposium, Verbundwerkstoffe und Werkstoffverbunde, Kassel (D), - conference lecture: Prag (CZ)Intermetallics in the Magnesium alloys and their effects in improving mechanical propertiesHort, N., Huang, Y., Kainer, K.U. (2005)
In: 10th International Symposium on Physics of Materials, ISPMA10, Prag (CZ), - lecture: TU Hamburg-Harburg, FB MaschinenbauGefuege und Eigenschaften metallischer WerkstoffeKainer, K.U., Fechner, D., Hort, N. (2005)
- conference paper: Prag (CZ)Intermetallics in the Magnesium alloys and their effects in improving mechanical propertiesHort, N., Huang, Y., Kainer, K.U. (2005)
In: 10th International Symposium on Physics of Materials, ISPMA10, Prag (CZ), 39.
2004
- conference lecture: Bremen (D)Herstellung und Eigenschaften von Magnesium-BauteilenKainer, K.U., Hort, N. (2004)
In: Leichtbau mit metallischen Werkstoffen, VDI-Seminar, Bremen (D), - conference lecture (invited): Portoroz (SLO)Recent developments in magnesium die castingKainer, K.U., Hort, N. (2004)
In: 44th Foundry Conference, Portoroz (SLO), - conference lecture: Geesthacht (D)Schmelzmetallurgische Herstellung von MetallmatrixverbundwerkstoffenHort, N. (2004)
In: DGM Fortbildung Metallische Verbundwerkstoffe, Geesthacht (D), - journal articleSome Studies on the Thermal-Expansion Behaviour of C-Fiber, SiCp, and In-Situ Mg2Si-Reinforced AZ31 Mg Alloy-Based Hybrid CompositesThakur, S., Dhindaw, B.K., Hort, N., Kainer, K.U. (2004)
In: Metallurgical and Materials Transactions A, Vol. 35, 3, 1167-1176. - conference lecture: Geesthacht (D)Bunt- und Edelmetallmatrix-VerbundwerkstoffeBlawert, C., Hort, N. (2004)
In: DGM Fortbildungsseminar Metallische Verbundwerkstoffe, Geesthacht (D), - journal articleMicro-Strain Induced by Thermal Cycling in the Short Fiber Reinforced AlSi12CuMgNi Piston Alloys and AE42 Magnesium AlloysHuang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2004)
In: Advanced Engineering Materials, Vol. 6, 11, 883-888. - journal articleMagnesium based MMCs reinforced with C-fibersDieringa, H., Hort, N., Kainer, K.U. (2004)
In: Advances in Technology of Materials and Materials Processing, Vol. 6, 2, 136-141. - conference lecture: Charlotte, NC (USA)Microstructural Investigations of the Mg-Sn and Mg-Sn-Al Alloy SystemsBowles, A.L., Blawert, C., Hort, N., Kainer, K.U. (2004)
In: TMS Annual Meeting, Charlotte, NC (USA), - conference lecture: Long Beach, CA (USA)Thermal Cycling and Creep Studies of AM50+Nd Magnesium Alloy Based Carbon Fiber, SiC Particulate and IN-SITU Mg2Si Reinforced Hybrid CompositesThakur, S.K., Dieringa, H., Dhindaw, B.K., Hort, N., Kainer, K.U. (2004)
In: SAMPE 2004, Long Beach, CA (USA), - conference lecture (invited): Nagaoka (J)Magnesium Based Metal Matrix Composites Reinforced with C-FibersDieringa, H., Hort, N., Kainer, K.U. (2004)
In: 4th International Symposium on the 21st Centurry COE Program of Nagaoka University of Technology, Nagaoka (J), - journal articleAutomotive applications of magnesium and its alloysBlawert, C., Hort, N., Kainer, K.U. (2004)
In: Transactions of the Indian Institute of Metals, Vol. 57, 4, 397-408. - conference lecture: Brno (CZ)Microstructural development in tension and compression creep of magnesium alloy AE42Dieringa, H., Bowles, A., Hort, N., Kainer, K.U. (2004)
In: 4th Internationale Conference on Materials Structure & Micromechanics of Fracture, Brno (CZ), - journal articleThermal behavior of short fiber reinforced AlSi12CuMgNi piston alloysHuang, Y., Hort, N., Kainer, K.U. (2004)
In: Composites / A, Vol. 35, 2, 249-263. - conference lecture: Kyoto (J)Investigation on thermal fatigue of metal matrix compositesHuang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2004)
In: 3rd International Conference on Fatigue of Composites, Kyoto (J), - conference lecture: Geesthacht (D)Pulvermetallurgisch hergestellte VerbundwerkstoffeHort, N., Kainer, K.U. (2004)
In: DGM Fortbildung Metallische Verbundwerkstoffe, Geesthacht (D), - conference paper: Charlotte, NC (USA)Microstructural Investigations of the Mg-Sn and Mg-Sn-Al Alloy SystemsBowles, A.L., Blawert, C., Hort, N., Kainer, K.U. (2004)
In: Magnesium Technology 2004, TMS Annual Meeting, Charlotte, NC (USA), 307-310. - conference paper: Long Beach, CA (USA)Thermal Cycling and Creep Studies of AM50+Nd Magnesium Alloy Based Carbon Fiber, SiC Particulate and IN-SITU Mg2Si Reinforced Hybrid CompositesThakur, S.K., Dieringa, H., Dhindaw, B.K., Hort, N., Kainer, K.U. (2004)
In: SAMPE 2004, Conference Proceedings, Long Beach, CA (USA), CD. - conference lecture: Stockheim (D)Magnesium, der Werkstoff fuer innovative ProdukteHort, N., Maier, P., Kainer, K.U. (2004)
In: Magnesium Forum, Zitzmann Druckguss GmbH, Stockheim (D), - conference lecture (invited): Bangalore (IND)Hot Tearing of MagnesiumKainer, K.U., Hort, N., Dieringa, H. (2004)
In: International Conference on Solidification Science and Processing, Bangalore (IND), - conference lecture: Peking (VCR)Investigations in the Magnesium-Tin SystemBowles, A., Dieringa, H., Blawert, C., Hort, N., Kainer, K.U. (2004)
In: International Conference on Magnesium - Science, Technology and Applications, Peking (VCR), - conference paper: Kyoto (J)Investigation on thermal fatigue of metal matrix compositesHuang, Y., Hort, N., Dieringa, H., Kainer, K.U. (2004)
In: Fatigue of Composites, ICF 03, Kyoto (J), 63-64.
2003
- journal articleCompression creep of short fibre reinforced magnesium alloy AE42Dieringa, H., Hort, N., Kainer, K.U. (2003)
In: Kompozyty / Composites, Vol. 3, 7, 275-278. - conference lecture: Wien (A)Schaedigungen in kurzfaserverstaerktem AlSi12CuMgNi hervorgerufen durch thermisches ZyklierenHort, N., Huang, Y., Kainer, K.U. (2003)
In: 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (A), - conference poster: Wolfsburg (D)Non-destructive testing of cast magnesium alloys by computerized tomographyIllerhaus, B., Hort, N., Potzies, C., Frank, H., Goebbels, J. (2003)
In: 6th International Conference Magnesium Alloys and their Applications, Wolfsburg (D), - conference lecture: Blacksburg, VA (USA)Effect of post heat treatment after squeeze casting on the micro-strain induced by thermal stress in the short fiber reinforced piston alloyHuang, Y., Hort, N., Kainer, K.U. (2003)
In: 5. International Congress on Thermal Stresses and Related Topics, TS 2003, Blacksburg, VA (USA), - conference lecture (invited): Nagoya (J)New Development in Magnesium Technology for Transportation IndustriesHort, N., Kainer, K.U. (2003)
In: AIST-ISEM International Symposium 2003, Nagoya (J), - conference lecture: Geesthacht (D)Pulvermetallurgische Herstellung von metallischen VerbundwerkstoffenHort, N. (2003)
In: DGM Fortbildungsseminar Metallische Verbundwerkstoffe, Geesthacht (D), - conference lecture (invited): Stuttgart (D)R&D Activities in EuropePotzies, C., Hort, N., Kainer, K.U. (2003)
In: 60th Annual World Magnesium Conference, Stuttgart (D), - journal articleThermal behavior of AlSi12CuMgNi piston alloy with and without short fiber reinforcedHuang, Y., Hort, N., Kainer, K.U. (2003)
In: Kompozyty / Composites, Vol. 3, 7, 279-284. - conference paper: San Diego, CA (USA)Thermal expansion and dimensional stability oF short fiber reinforced AlSi12CuMgNi piston alloysHuang, Y., Hort, N., Kainer, K.U. (2003)
In: ICCM-14, Global Composite Advancements-Bridging Academia and Industry, Paper No.1325, San Diego, CA (USA), CD. - conference lecture: Sindelfingen (D)Magnesium und seine Legierungen – Herstellung, Be- und VerarbeitungHort, N., Kainer, K.U. (2003)
In: Intelligenter Magnesiumeinsatz im Automobil, Einfuehrungsworkshop, Sindelfingen (D), - conference poster: Brisbane (AUS)Corrosion Behaviour of Semi-Solid Processed Mg-Zn-Ca-RE AlloysHort, N., Morales, E., Blawert, C., Dietzel, W., Kainer, K.U., Ghali, E. (2003)
In: 1st International Conference on Light Metals Technology 2003, Brisbane (AUS), - conference lecture: Vancouver (CDN)The effect of semi-solid processing on the corrosion behaviour of Mg-Zn-RE alloysMorales, E., Blawert, C., Hort, N., Dietzel, W., Ghali, E., Kainer, K.U. (2003)
In: Environmental Degradation of Materials and Corrosion Control in Metals, COM 2003, International Symposium, Vancouver (CDN), - conference paper: Wien (A)Korrosions- und Verschleisseigenschaften von kurzfaserverstaerkter Magnesiumlegierung QE22Blawert, C., Morales, E., Dieringa, H., Hort, N., Azeem, M.A., Kumar, S. (2003)
In: Verbundwerkstoffe, 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (A), 159-164. - conference lecture (invited): Madrid (E)Effect of Thermal Treatment on Thermal Expansion Behaviour of Magnesium Alloy Based Hybrid CompositesThakur, S.K., Dhindaw, B.K., Hort, N., Kainer, K.U. (2003)
In: THERMEC 2003, Madrid (E), - journal articleEffect of Thermal Treatment on Thermal Expansion Behaviour of Magnesium Alloy Based Hybrid CompositesThakur, S.K., Dhindaw, B.K., Hort, N., Kainer, K.U. (2003)
In: Materials Science Forum, Vol. 426-432, 2027-2032. - conference lecture: Ustron-Jaszowiec (PL)Compression creep of short fibre reinforced magnesium alloy AE42Dieringa, H., Hort, N., Kainer, K.U. (2003)
In: Composites 2003, Theory and Practice, Ustron-Jaszowiec (PL), - conference lecture: Czestochowa (PL)Thermal behavior of AlSi12CuMgNi piston alloy with and without short fiber reinforcedHuang, Y., Hort, N., Kainer, K.U. (2003)
In: Composites 2003, Theory and Practice, Czestochowa (PL), - conference lecture: Osaka (J)Corrosion Behaviour of Magnesium Alloys with RE Additions in Sodium Chloride SolutionsMorales, E.D., Ghali, E., Hort, N., Dietzel, W., Kainer, K.U. (2003)
In: PSTAM 2003, 2nd International Conference on "Platform Science and Technology for Advanced Magnesium Alloys", Osaka (J), - journal articleSome studies on Mg alloy reinforced with ceramic discontinuous phasesThakur, S.K., Dhindaw, B.K., Hort, N., Kainer, K.U. (2003)
In: Materials Science Forum, Vol. 419-422, 4, 837-842. - conference lecture: Osaka (J)Some studies on Mg alloy reinforced with Ceramic discontinuous phasesThakur, S.K., Dhindaw, B.K., Hort, N., Kainer, K.U. (2003)
In: Platform Science and Technology for Advanced Magnesium Alloys, PSTAM 2003, Osaka (J), - book partPulvermatallurgisch hergestellte Metall-Matrix-VerbundwerkstoffeHort, N., Kainer, K.U. (2003)
In: MetallischeVerbundwerkstoffe, 260-295. - conference lecture (invited): Osaka (J)Influence of Heat Treatment on Microstructure of Hot Extruded AZ31Dzwonczyk, J., Bohlen, J., Hort, N., Kainer, K.U. (2003)
In: PSTAM 2003, 2nd International Conference on Platform Science and Technology for Advanced Magnesium Alloys, Osaka (J), - conference lecture: Wien (A)Thermische Ausdehnung in kurzfaserverstaerkten AlSi12CuMgNi- und AE42-LegierungenHuang, Y., Dieringa, H., Hort, N., Kainer, K.U. (2003)
In: 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (A), - conference lecture: Geesthacht (D)Verbundwerkstoffe mit BuntmetallmatrixHort, N., Blawert, C. (2003)
In: DGM Fortbildungsseminar Metallische Verbundwerkstoffe, Geesthacht (D), - conference lecture (invited): Puna (IND)Local Materials Engineering of Magnesium AlloysHort, N., Dieringa, H., Kainer, K.U. (2003)
In: International Conference on Advances in Materials & Processes for Industrial Applications, Puna (IND), - journal articleInfluence of Heat Treatment on Microstructure of Hot Extruded AZ31Dzwonczyk, J., Bohlen, J., Hort, N., Kainer, K.U. (2003)
In: Materials Science Forum, Vol. 419-422, 297-302. - conference paper: Wolfsburg (D)Non-destructive testing of cast magnesium alloys by computerized tomographyIllerhaus, B., Hort, N., Potzies, C., Frank, H., Goebbels, J. (2003)
In: Magnesium, 6th International Conference Magnesium Alloys and their Applications, Wolfsburg (D), 747-751. - conference paper: Wolfsburg (D)Friction Welding of Magnesium: Microstructural CharacterisationBowles, A.L., Hort, N., Meyer, A., dos Santos, J., Kainer, K.U. (2003)
In: Magnesium, 6th International Conference Magnesium Alloys and their Applications, Wolfsburg (D), 917-923. - conference paper: Wolfsburg (D)Influence of extrusion methods on microstructure and mechanical properties of AZ31 magnesium alloyDzwonczyk, J., Hort, N., Kainer, K.U. (2003)
In: Magnesium, 6th International Conference Magnesium Alloys and their Applications, Wolfsburg (D), 427-432. - conference lecture (invited): Pune (IND)Thermal cycling behaviour of short fiber reinforced AE42 Magnesium alloyDieringa, H., Bowles, A, Huang, Y., Hort, N., Kainer, K.U. (2003)
In: International Conference on Advances in Materials & Processes for Industrial Applications, Pune (IND), - conference lecture: Wolfsburg (D)Influence of extrusion methods on microstructure and mechanical properties of AZ31 magnesium alloyDzwonczyk, J., Hort, N., Kainer, K.U. (2003)
In: 6th International Conference Magnesium Alloys and their Applications, Wolfsburg (D), - conference paper: Puna (IND)Local Materials Engineering of Magnesium AlloysHort, N., Dieringa, H., Kainer, K.U. (2003)
In: Material Show 2003, International Conference on Advances in Materials & Processes for Industrial Applications, Puna (IND), 8-13. - conference paper: Nagoya (J)New Development in Magnesium Technology for Transportation IndustriesHort, N., Kainer, K.U. (2003)
In: AIST-ISEM International Symposium 2003, Nagoya (J), 23-27. - conference paper: Stuttgart (D)R&D Activities in EuropePotzies, C., Hort, N., Kainer, K.U. (2003)
In: 60th Annual World Magnesium Conference, Stuttgart (D), 52-56. - conference paper: Wien (A)Schaedigungen in kurzfaserverstaerktem AlSi12CuMgNi hervorgerufen durch thermisches ZyklierenHort, N., Huang, Y., Kainer, K.U. (2003)
In: Verbundwerkstoffe, 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (A), 242-247. - journal articleNew Development in Magnesium Technology for Light Weight Structures in Transportation IndustriesGoeken, J., Bohlen, J., Hort, N., Letzig, D., Kainer, K.U. (2003)
In: Materials Science Forum, Vol. 426-432, 153-160. - conference paper: Pune (IND)Thermal cycling behaviour of short fiber reinforced AE42 Magnesium alloyDieringa, H., Bowles, A, Huang, Y., Hort, N., Kainer, K.U. (2003)
In: Materials Show 2003, International Conference on Advances in Materials & Processes for Industrial Applications, Pune (IND), 194-199. - conference paper: Wien (A)Thermische Ausdehnung in kurzfaserverstaerkten AlSi12CuMgNi- und AE42-LegierungenHuang, Y., Dieringa, H., Hort, N., Kainer, K.U. (2003)
In: Verbundwerkstoffe, 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (A), 115-120. - conference paper: Wolfburg (D)Creep Behaviour of MgZnRE Alloys Formed by Semi-Solid-CastingMorales, E., Hort, N., Kainer, K.U. (2003)
In: Magnesium, 6th International Conference Magnesium Alloys and their Applications, Wolfburg (D), 68-73. - journal articleCorrosion Behaviour of Magnesium Alloys with RE Additions in Sodium Chloride SolutionsMorales, E.D., Ghali, E., Hort, N., Dietzel, W., Kainer, K.U. (2003)
In: Materials Science Forum, Vol. 419-422, 867-872. - conference poster: Wolfsburg (D)Friction Welding of Magnesium: Microstructural CharacterisationBowles, A.L., Hort, N., Meyer, A., dos Santos, J., Kainer, K.U. (2003)
In: 6th International Conference Magnesium Alloys and their Applications, Wolfsburg (D), - conference poster: Wolfsburg (D)Extending the Range of Applications for Magnesium Alloys - DFG Priority Programme 1168 - InnoMagTecHort, N., Kainer, K.U. (2003)
In: 6th International Conference and Exhibition on Magnesium Alloys and their Applications, Wolfsburg (D), - conference paper: Blacksburg, VA (USA)Effect of post heat treatment after squeeze casting on the micro-strain induced by thermal stress in the short fiber reinforced piston alloyHuang, Y., Hort, N., Kainer, K.U. (2003)
In: 5. International Congress on Thermal Stresses and Related Topics, TS 2003, Blacksburg, VA (USA), MA-3. - conference paper: Wolfsburg (D)Thermal spraying of Magnesium alloys for corrosion and wear protectionLugscheider, E., Parco, M., Kainer, K.U., Hort, N. (2003)
In: Magnesium, 6th International Conference Magnesium Alloys and their Applications, Wolfsburg (D), 860-868. - conference lecture (invited): Lausanne (CH)Progress in Usage of Magnesium Alloys for Light Weight Structures in Transportation IndustriesKainer, K.U., Hort, N., Bohlen, J., Dietzel, W. (2003)
In: Euromat 2003, Lausanne (CH), - conference lecture (invited): Madrid (E)New Development in Magnesium Technology for Light Weight Structures in Transportation IndustriesGoeken, J., Bohlen, J., Hort, N., Letzig, D., Kainer, K.U. (2003)
In: Thermec 2003, International Conference on Processing and Manufacturing of Advanced Materials, Madrid (E), - conference paper: Vancouver (CDN)The effect of semi-solid processing on the corrosion behaviour of Mg-Zn-RE alloysMorales, E., Blawert, C., Hort, N., Dietzel, W., Ghali, E., Kainer, K.U. (2003)
In: Environmental Degradation of Materials and Corrosion Control in Metals, COM 2003, International Symposium, Vancouver (CDN), 3-4.
2002
- conference lecture: Stuttgart (D)MagnesiumlegierungenHort, N., Dieringa, H., Kainer, K.U. (2002)
In: IIR-Workshop: Magnesium - Einsatz im Automobilbau, Stuttgart (D), - conference paper: Florence (I)Thermal Cycling of Light Metal Matrix Composites Reinforced with Ceremic Short-FibresHort, N., Dieringa, H., Kainer, K.U. (2002)
In: CIMTEC 2002, 3rd Forum on New Materials, Advanced Inorganic Structural Fiber Composites IV, Vol. 5, Florence (I), 218-226. - conference lecture (invited): Stuttgart (D)Verfahrensoptimierte LegierungsentwicklungenKainer, K.U., Letzig, D., Hort, N., Dieringa, H. (2002)
In: Magnesium im Automobil, Stuttgart (D), - conference paper: San Diego, CA (USA)Thermal cycling of hybrid reinforced Magnesium based metal matrix compositesThakur, S.K., Dhindaw, B.K., Hort, N., Kainer, K.U. (2002)
In: 9th International Conference on Composite Materials, ICCE 9, San Diego, CA (USA), 775-776. - conference lecture: Bremen (D)Neue Verfahren fuer metallische HochleistungswerkstoffeHort, N., Potzies, C., Kainer, K.U. (2002)
In: Leichtbau mit metallischen Werkstoffen, Seminar am IFAM, VDI Wissensforum, Bremen (D), - conference lecture: Stuttgart (D)Magnesium-Matrix-VerbundwerkstoffeHort, N., Dieringa, H., Kainer, K.U. (2002)
In: IIR-Workshop: Magnesium - Einsatz im Automobilbau, Stuttgart (D), - conference paper: Florence (I)Behaviour of Saffil-fibre reinforced ZE 41 magnesium hybrid MMC in creep and thermal cyclingDieringa, H., Hort, N., Kainer, K.U. (2002)
In: CIMTEC 2002, 3rd Forum on New Materials, Advanced Inorganic Structural Fiber Composites IV, Vol. 5, Florence (I), 227-234. - conference lecture: Lausanne (CH)Influence of Extrusion Ratio on Microstructure and Mechanical Properties of Hot Extruded AZ31Dzwonczyk, J., Bohlen, J., Hort, N., Kainer, K.U. (2002)
In: Junior EUROMAT 2002, Lausanne (CH), - conference lecture: Stuttgart (D)Herstellung, Ver- und Bearbeitung von MagnesiumlegierungenHort, N., Frank, H., Kainer, K.U. (2002)
In: IIR-Workshop: Magnesium - Einsatz im Automobilbau, Stuttgart (D), - conference paper: San Diego, Ca (USA)Creep and thermal loading of in situ processed magnesium metal matrix compositesDieringa, H., Hort, N., Kainer, K.U., Wesemann, J. (2002)
In: ICCE 9, 9th International Conference on Composite Materials, San Diego, Ca (USA), 169-170. - doctoral thesis: TU Clausthal, FB Bergbau, Huetten- und MaschinenwesenZum Verhalten der Kupfer-Nickellegierung Marinel unter Zugbelastung in korrosiven Medien (Dissertation)Hort, N. (2002)
- conference lecture: Muenchen (D)Influence of Heat Treatment on Microstructure and Mechanical Properties of AZ31 Extruded with different Extrusion RatiosDzwonczyk, J., Bohlen, J., Hort, N., Kainer, K.U. (2002)
In: Materials Week 2002, Muenchen (D), - conference lecture (invited): Hannover (D)Erweiterung der Einsatzbereiche von Magnesiumwerkstoffen unter Beruecksichtigung moderner VerbindungstechnikenKainer, K.U., Blawert, C., Hort, N., Letzig, D., dos Santos, J.F. (2002)
In: Intelligente Leichtbau Systeme, Congress, Hannover (D), - conference lecture: Laussane (CH)Corrosion Behaviour of Mg-Alloys with RE additions in ASTM WaterMorales, E., Hort, N., Ghali, E., Kainer, K.U. (2002)
In: Junior EUROMAT 2002, Laussane (CH),
2001
- conference lecture: Chemnitz (D)Thermozyklische Behandlung von Aluminium-Matrix-VerbundwerkstoffenHort, N., Kainer, K.U., Buschmann, R. (2001)
In: Verbundwerkstoffe und Werkstoffverbunde, Chemnitz (D), - conference lecture (invited): London (GB)Short-Fibre Reinforced Metal Matrix CompositesKainer, K.U., Hort, N. (2001)
In: MMC 8 - Metallic Composites and Foams, London (GB), - conference lecture (invited): Stuttgart (D)Magnesium als Werkstoff fuer den LeichtbauKainer, K.U., Potzies, C., Hort, N., Benzler, T.U. (2001)
In: Zukunft Fahrzeug-Leichtbau - Optimaler Werkstoffeinsatz, Stuttgart (D), - conference lecture (invited): GKSS, Geesthacht (D)Magnesiummatrix - VerbundwerkstoffeHort, N., Dieringa, H., Kainer, K.U. (2001)
In: DGM Fortbildungsseminar: Magnesium - Eigenschaften, Anwendungen, Potentiale, GKSS, Geesthacht (D), - conference lecture: Peking (VRC)Influence of thermal cycling on properties of Al based MMC's reinforced by ceramic fibresHort, N., Kainer, K.U. (2001)
In: International Conference on Composite Materials, ICCM-13, Peking (VRC), - conference lecture: Bremen (D)Potential von metallischen Verbundwerkstoffen fuer den Einsatz als Leichtbauwerkstoff in der VerkehrstechnikHort, N., Kainer, K.U. (2001)
In: Leichtbau mit metallischen Werkstoffen, VDI-Wissensforum, Seminar am IFAM, Bremen (D), - conference paper: Chemnitz (D)Thermozyklische Behandlung von Aluminium-Matrix-VerbundwerkstoffenHort, N., Kainer, K.U., Buschmann, R. (2001)
In: Verbundwerkstoffe und Werkstoffverbunde, Chemnitz (D), 170-175. - conference lecture: Muenchen (D)Kurzfaserverstaerkte Verbundwerkstoffe mit metallischer MatrixHort, N., Kainer, K.U. (2001)
In: DGM Fachausschuss Metall-Matrix-Verbundwerkstoffe, Arbeitskreis Zuverlaessigkeit von Metallmatrix-Verbundwerkstoffen, Muenchen (D), - conference paper: Peking (VRC)Influence of thermal cycling on properties of Al based MMC's reinforced by ceramic fibresHort, N., Kainer, K.U. (2001)
In: International Conference on Composite Materials, ICCM-13, Peking (VRC), CD.