2024
journal article
The strength-ductility synergy of magnesium matrix nanocomposite achieved by a dual-heterostructureFan, L.,Xiong, Y.,Zeng, Y.,Ni, R.,Zhang, Y.,Ren, L.,Dieringa, H.,Huang, Y.,Quan, G.,Zhang, X. (2024)
In: Journal of Materials Science & Technology, Vol. , , , , . journal article
Effect of Graphene Nanoplatelet Content on Mechanical and Elevated-Temperature Tribological Performance of Self-Lubricating ZE10 Magnesium Alloy NanocompositesKandemir, S.,Yöyler, S.,Kumar, R.,Antonov, M.,Dieringa, H. (2024)
In: Lubricants, Vol. 12, , , 2, 52.
journal article
In-situ study of damage mechanisms in Mg-6Li dual-phase alloyLi, J.,Jin, L.,Yi, S.,Zhang, X.,Dong, J.,Luo, M. (2024)
In: Journal of Materials Science & Technology, Vol. 179, , , , 114-124.
journal article
Deformation mechanisms of β-Li in Mg-Li dual-phase alloy and effects of surface oxide layerLi, J.,Jin, L.,Yi, S.,Zhang, X.,Dong, J.,Luo, M. (2024)
In: Materials Science and Engineering: A, Vol. 889, , , , 145856.
journal article
Insights into creep behavior of Mg–14Gd–1Zn–0.4Zr (wt.%) alloy containing β- and γ-type precipitatesShi, H.,Yang, L.,Huang, Y.,Zhou, S.,Wang, K.,Liu, C.,Gavras, S.,Xiao, L.,Willumeit-Römer, R.,Dieringa, H.,Hort, N. (2024)
In: Materials Science and Engineering: A, Vol. 893, , , , 146065. journal article
Behavior of microstructure and mechanical properties in the stir zone of friction stir welded ME21 magnesium alloyPasetti-Rosa, A.,Victoria-Hernandez, J.,da Cunha, P.H.C.P.,de Lima Lessa, C.R.,Bergmann, L.A.,Kurtz, G.,Letzig, D.,Klusemann, B. (2024)
In: Journal of Materials Research and Technology : JMRT, Vol. 29, , , , 4895-4901.
journal article
Scope of magnesium ceria nanocomposites for mandibular reconstruction: Degradation and biomechanical evaluation using a 3-dimensional finite element analysis approachKujur, M.S.,Krishnan, A.V.,Manakari, V.,Parande, G.,Dieringa, H.,Mallick, A.,Gupta, M. (2024)
In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 152, , , , 106424. journal article
Novel Magnesium Nanocomposite for Wire-Arc Directed Energy DepositionDieringa, H.,Nienaber, M.,Giannopoulou, D.,Isakovic, J.,Bohlen, J.,Kujur, M.S.,Ben Khalifa, N.,Klein, T.,Gneiger, S. (2024)
In: Materials, Vol. 17, , , 2, 500. journal article
Effects of Zn Addition and Twin Roll Casting Process on the Microstructure, Texture, and Mechanical Properties of the Mg-Al-Mn-Ca SheetEom, D.,Yi, S.,Letzig, D.,Park, N.J. (2024)
In: Metals, Vol. 14, , , 3, 261.
journal article
Exploring the Relationship Between Sputter-Deposition Conditions and Electrochemical Response of ZrO2 Films on Biodegradable MgZnCa AlloyMillán-Ramos, B.,Victoria-Hernández, J.,Letzig, D.,Rodil, S.E. (2024)
In: Journal of Vacuum Science and Technology A, Vol. 42, , , 2, 023102. journal article
Numerical simulation of friction extrusion: process characteristics and material deformation due to frictionDiyoke, G.,Rath, L.,Chafle, R.,Ben Khalifa, N.,Klusemann, B. (2024)
In: International Journal of Material Forming, Vol. 17, , , , 26. journal article
How alloying and processing effects can influence the microstructure and mechanical properties of directly extruded thin zinc wiresNienaber, M.,Bramkamp, S.,Ben Khalifa, N.,Bohlen, J. (2024)
In: Materials Science and Engineering: A, Vol. 905, , , , 146720. journal article
Process window and mechanical properties for thin magnesium- and zinc-wires in dieless wire drawingBraatz, M.,Bohlen, J.,Ben Khalifa, N. (2024)
In: International Journal of Material Forming, Vol. 17, , , , 46. journal article
Deformation Mechanisms of Magnesium Alloys with Rare-Earth and Zinc Additions Under Plane Strain CompressionZeng, X.,Yi, S. (2024)
In: Materials, Vol. 17, , , 1, 33.
2023
journal article
Compressive creep behavior and microstructural evolution of sand-cast and peak-aged Mg–12Gd–0.4Zr alloy at 250 °CShi, H.,Huang, Y.,Yang, L.,Liu, C.,Dieringa, H.,Lu, C.,Xiao, L.,Willumeit-Römer, R.,Hort, N. (2023)
In: Materials Science and Engineering: A, Vol. 882, , , , 145422.
journal article
Mechanistic origin of the enhanced strength and ductility in Mg-rare earth alloysOvri, H.,Markmann, J.,Barthel, J.,Kruth, M.,Dieringa, H.,Lilleodden, E. (2023)
In: Acta Materialia, Vol. 244, , , , 118550.
journal article
Achieving high strength and ductility in a heterogeneous bimodal grain structured TiC/AZ61 magnesium nanocomposites via powder metallurgyFan, L.,Zhou, M.,Zhang, Y.,Dieringa, H.,Qian, X.,Zeng, Y.,Lu, X.,Huang, Y.,Quan, G. (2023)
In: Materials Science and Engineering: A, Vol. 867, , , , 144344. journal article
Micro-alloyed Mg-Ca: Corrosion susceptibility to heating history and a plain problem-solving approachDeng, M.,Wang, L.,Snihirova, D.,Bohlen, J.,Kurz, G.,Lamaka, S.V.,Höche, D.,Zheludkevich, M.L. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , 4, 1193-1205.
journal article
Atomistic insights into the inhomogeneous nature of solute segregation to grain boundaries in magnesiumPei, R.,Xie, Z.,Yi, S.,Korte-Kerzel, S.,Guénolé, J.,Al-Samman, T. (2023)
In: Scripta Materialia, Vol. 230, , , , 115432. journal article
Improving the ductility and toughness of nano-TiC/AZ61 composite by optimizing bimodal grain microstructure via extrusion speedFan, L.,Zhou, M.,Lao, W.,Zhang, Y.,Dieringa, H.,Zeng, Y.,Huang, Y.,Quan, G. (2023)
In: Journal of Magnesium and Alloys, Vol. , , , , . journal article
Analysis of dislocation activity of Mg-Zn-Y alloy by using synchrotron radiation under tensile loadingHa, C.,Kim, Y.M.,Woo, S.W.,Maawad, E.,Letzig, D.,Yi, S. (2023)
In: Journal of Synchrotron Radiation, Vol. 30, , , , . journal article
Microstructure and texture evolution of the magnesium alloy ZMX210 during rolling and annealingKurz, G.,Ganne, K.,Nienaber, M.,Bohlen, J. (2023)
In: Materials, Vol. 16, , , 12, 4227.
journal article
Microstructure and Texture Evolution During the Heat Treatment of 0.6Zn–0.6Ca–Mg Alloy Sheet Manufactured via Twin Roll CastingLee, H.J.,Yi, S.,Letzig, D.,Park, N. (2023)
In: Metals and Materials International, Vol. 29, , , , 2955-2964. journal article
Microstructural evolution of Mg–14Gd–0.4Zr alloy during compressive creepShi, H.,Huang, Y.,Yang, L.,Liu, C.,Dieringa, H.,Lu, C.,Xiao, L.,Willumeit-Römer, R.,Hort, N. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , , 3161-3173. journal article
Advanced direct extrusion process with real-time controllable extrusion parameters for microstructure optimization of magnesium alloysAzpiazu, L.E.,Egea, A.,Letzig, D.,Ha, C. (2023)
In: International Journal of Material Forming, Vol. 16, , , , 39. journal article
Influence of recycled carbon fiber addition on the microstructure and creep response of extruded AZ91 magnesium alloyKandemir, S.,Bohlen, J.,Dieringa, H. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , 7, 2518-2529. journal article
Influence of Ca addition on the dynamic and static recrystallization behavior of direct extruded flat profiles of Mg-Y-Zn alloyNienaber, M.,Bohlen, J.,Yi, S.,Kainer, K.U.,Letzig, D. (2023)
In: Journal of Magnesium and Alloys, Vol. , , , , . journal article
Investigation of the friction behavior between dry/infiltrated glass fiber fabric and metal sheet during deep drawing of fiber metal laminatesKruse, M.,Werner, H.O.,Chen, H.,Mennecart, T.,Liebig, W.V.,Weidenmann, K.A.,Ben Khalifa, N. (2023)
In: Production Engineering, Vol. 17, , , , 37-46. journal article
Effects of Ca and Nd addition on plastic instability in extruded Mg-Mn alloy deformed under various conditionsWoo, S.K.,Pei, R.,Al-Samman, T.,Letzig, D.,Yi, S. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , 2, 543-552. journal article
Solute drag-controlled grain growth in magnesium investigated by quasi in-situ orientation mapping and level-set simulationsPei, R.,Zhao, Y.,Zubair, M.,Yi, S.,Al-Samman, T. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , 7, 2312-2325. journal article
Microstructure, mechanical properties and fracture behaviors of large-scale sand-cast Mg-3Y-2Gd-1Nd-0.4Zr alloyYang, L.,Huang, Y.,Hou. Z.,Xiao, L.,Xu, Y.,Dong, X.,Li, F.,Kurz, G.,Sun, B.,Li, Z.,Hort, N. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , 8, 2763-2775. journal article
Understanding the corrosion of Mg alloys in in vitro urinary tract conditions: a step forward towards a biodegradable metallic ureteral stentPacheco, M.,Aroso, I.M.,Silva, J. M.,Lamaka, S.V.,Bohlen, J.,Nienaber, M.,Letzig, D.,Lima, E.,Barros, A.A.,Reis, R.L. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , 11, 4301-4324. journal article
Individual effect of Y and Nd on the microstructure formation of Mg-Y-Nd alloys processed by severe plastic deformation and their effect on the subsequent mechanical and corrosion propertiesZemková, M.,Minárik, P.,Dittrich, J.,Bohlen, J.,Král, R. (2023)
In: Journal of Magnesium and Alloys, Vol. 11, , , 2, 509-521.
2022
journal article
In Situ Synchrotron Radiation Diffraction Study of Compression of AZ91 Composites Reinforced with Recycled Carbon FibresMance, S.,Dieringa, H.,Bohlen, J.,Gavras, S.,Stark, A.,Schell, N.,Pereira da Silva, J.,Tolnai, D. (2022)
In: Crystals, Vol. 12, , , 11, 1502. journal article
Assessment of the Mechanical and Corrosion Properties of Mg-1Zn-0.6Ca/Diamond Nanocomposites for Biomedical ApplicationsŞevik, H.,Özarslan, S.,Dieringa, H. (2022)
In: Nanomaterials, Vol. 12, , , 24, 4399. journal article
Concurrence of High Corrosion Resistance and Strength with Excellent Ductility in Ultrafine-Grained Mg-3Y AlloyZemková, M.,Minárik, P.,Jablonská, E.,Veselý, J.,Bohlen, J.,Kubásek, J.,Lipov, J.,Ruml, T.,Havlas, V.,Král, R. (2022)
In: Materials, Vol. 15, , , 21, 7571.
journal article
Influence of Ca+Bi on tensile and strain hardening behaviour of AZ91 alloyMajhi, J.,Mondal, A.,Basu, A.,Dieringa, H.,Kumar, S. (2022)
In: Materials Science and Technology, Vol. 38, , , 6, 377-389. journal article
Plastic instability and texture modification in extruded Mg-Mn-Nd alloyWoo, S.,Pei, R.,Al-Samman, T.,Letzig, D.,Yi, S. (2022)
In: Journal of Magnesium and Alloys, Vol. 10, , , 1, 146-159. journal article
Property profile development during wire extrusion and wire drawing of magnesium alloys AZ31 and ZX10Nienaber, M.,Braatz, M.,Ben Khalifa, N.,Bohlen, J. (2022)
In: Materials & Design, Vol. 224, , , , 111355. journal article
Effects of Y Additions on the Microstructures and Mechanical Behaviours of as Cast Mg–xY–0.5Zr AlloysYou, S.,Huang, Y.,Dieringa, H.,Maawad, E.,Gan, W.,Zhang, Y.,Kainer, K.,Willumeit-Römer, R.,Hort, N. (2022)
In: Advanced Engineering Materials, Vol. 24, , , 4, 2101033.
journal article
Role of non-basal slip systems on the microstructure and texture development of ZXK-Mg alloy deformed in Plane Strain Compression at elevated temperatureVictoria-Hernandez, J.,Yi, S.,Letzig, D. (2022)
In: Scripta Materialia, Vol. 208, , , , 114322.
journal article
Revealing the role of Al in the microstructural evolution and creep properties of Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloyYang, H.,Jiang, B.,Huang, G.,Huang, Y.,Jin, Y.,Gavras, S.,Dieringa, H. (2022)
In: Materials Science and Engineering: A, Vol. 832, , , , 142358.
journal article
Effect of solute clusters on plastic instability in magnesium alloysPei, R.,Woo, S.,Yi, S.,Al-Samman, T. (2022)
In: Materials Science and Engineering: A, Vol. 835, , , , 142685. journal article
Degradation Behavior and Mechanical Integrity of a Mg-0.7Zn-0.6Ca (wt.%) Alloy: Effect of Grain Sizes and Crystallographic TextureMillán-Ramos, B.,Morquecho-Marín, D.,Silva-Bermudez, P.,Ramírez-Ortega, D.,Depablos-Rivera, O.,García-López, J.,Fernández-Lizárraga, M.,Almaguer-Flores, A.,Victoria-Hernández, J.,Letzig, D.,Rodil, S. (2022)
In: Materials, Vol. 15, , , 9, 3142.
journal article
Bilayer coatings for temporary and long–term corrosion protection of magnesium–AZ31 alloyKorrapati, V.,Scharnagl, N.,Letzig, D.,Zheludkevich, M. (2022)
In: Progress in Organic Coatings, Vol. 163, , , , 106608. journal article
Non-flammable magnesium sheet alloys with an excellent age-hardenabilityJo, S.,Kim, Y.,Letzig, D.,Yi, S. (2022)
In: Scripta Materialia, Vol. 219, , , , 114880. journal article
Property Variation of Extruded Mg-Gd Alloys by Mn Addition and ProcessingWiese, B.,Harmuth, J.,Willumeit-Römer, R.,Bohlen, J. (2022)
In: Crystals, Vol. 12, , , 8, 1036. journal article
Influence of Extrusion Rate on Microstructure and Mechanical Properties of Magnesium Alloy AM60 and an AM60-Based Metal Matrix NanocompositeGiannopoulou, D.,Bohlen, J.,Ben Khalifa, N.,Dieringa, H. (2022)
In: Nanomaterials, Vol. 12, , , 15, 2682. journal article
Individual Contribution of Zn and Ca on Age-Hardenability and Formability of Zn-Based Magnesium Alloy SheetJo, S.,Bohlen, J.,Kurz, G. (2022)
In: Materials, Vol. 15, , , 15, 5239.
journal article
Spark plasma sintered Mg-4Y-3Nd with exceptional tensile performanceKnapek, M.,Minárik, P.,Greš, A.,Zemková, M.,Lukáč, F.,Bohlen, J.,Chmelík, F.,Král, R. (2022)
In: Materials Science and Engineering: A, Vol. 849, , , , 143481. journal article
Effect of Process Temperature on the Texture Evolution and Mechanical Properties of Rolled and Extruded AZ31 Flat ProductsNienaber, M.,Kurz, G.,Letzig, D.,Kainer, K.,Bohlen, J. (2022)
In: Crystals, Vol. 12, , , 9, 1307. journal article
AM60-AlN Nanocomposite and AM60 Alloy Corrosion Activity in Simulated Marine-Coastal AmbienceChavez, L.,Veleva, L.,Sanchez, G.,Dieringa, H. (2022)
In: Metals, Vol. 12, , , 12, 1997.
2021
journal article
Novel Magnesium Based Materials: Are They Reliable Drone Construction Materials? A Mini ReviewHöche, D.,Weber, W.,Gazenbiller, E.,Gavras, S.,Hort, N.,Dieringa, H. (2021)
In: Frontiers in Materials, Vol. 8, , , , 575530. journal article
Texture development and dislocation activities in Mg-Nd and Mg-Ca alloy sheetsHa, C.,Bohlen, J.,Zhou, X.,Brokmeier, H.,Kainer, K.,Schell, N.,Letzig, D.,Yi, S. (2021)
In: Materials Characterization, Vol. 175, , , , 111044. journal article
The slip activity during the transition from elastic to plastic tensile deformation of the Mg-Al-Mn sheetDobron, P.,Drozdenko, D.,Fekete, K.,Knapek, M.,Bohlen, J.,Chmelik, F. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, , , 3, 1057-1067. journal article
Influence of Twin-Roll Casting Speed on Microstructural Homogeneity, Centerline Segregation, and Surface Quality of Three Different Mg AlloysVictoria-Hernandez, J.,Kurz, G.,Bohlen, J.,Yi, S.,Letzig, D. (2021)
In: JOM: The Journal of the Minerals, Metals and Materials Society, Vol. 73, , , 5, 1460-1470. journal article
Corrosion and mechanical properties of a novel biomedical WN43 magnesium alloy prepared by spark plasma sinteringKnapek, M.,Zemkova, M.,Gres, A.,Jablonska, E.,Lukac, F.,Kral, R.,Bohlen, J.,Minarik, P. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, , , 3, 853-865. journal article
Homogenization of the interfacial bonding of compound-cast AA7075/6060 bilayer billets by co-extrusionChen, H.,Giannopoulou, D.,Greß, T.,Isakovic, J.,Mittler, T.,Volk, W.,Ben Khalifa, N. (2021)
In: International Journal of Material Forming, Vol. 14, , , 5, 1109-1119. journal article
Superplasticity at Intermediate Temperatures of ZK60 Magnesium Alloy Processed by Indirect ExtrusionPalacios Trujillo, C.,Victoria-Hernandez, J.,Hernandez-Silva, D.,Letzig, D.,Garcia-Bernal, M. (2021)
In: Metals, Vol. 11, , , 4, 606. journal article
Assessing the microstructure and in vitro degradation behavior of Mg-xGd screw implants using µCTKrüger, D.,Zeller-Plumhoff, B.,Wiese, B.,Yi, S.,Zuber, M.,Wieland, F.,Moosmann, J.,Willumeit-Römer, R. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, , , 6, 2207-2222.
journal article
Deteriorated corrosion performance of micro-alloyed Mg-Zn alloy after heat treatment and mechanical processingJin, Y.,Blawert, C.,Hang, H.,Wiese, B.,Bohlen, J.,Mei, D.,Deng, M.,Feyerabend, F.,Willumeit, R. (2021)
In: Journal of Materials Science & Technology, Vol. 92, , , , 214-224. journal article
Corrosion Behavior of Extruded AM60-AlN Metal Matrix Nanocomposite and AM60 Alloy Exposed to Simulated Acid Rain EnvironmentChavez, L.,Veleva, L.,Feliu, S.,Giannopoulou, D.,Dieringa, H. (2021)
In: Metals, Vol. 11, , , 6, 990. journal article
Properties of Mg-based Metal Matrix Nanocomposites Processed by High Shear Dispersion Technique (HSDT) - A ReviewYang, H.,Patel, J.,Yang, X.,Gavras, S.,Dieringa, H. (2021)
In: Current Nanomaterials, Vol. 6, , , 2, 106-118.
journal article
New concepts of extrusion dies to reduce the anisotropy of extruded profiles by means of additive manufacturingBen Khalifa, N.,Isakovic, J.,Bohlen, J. (2021)
In: CIRP Annals, Vol. 70, , , 1, 231-234.
journal article
Corrosion behavior of Mg wires for ureteral stent in artificial urine solutionMei, D.,Wang, C.,Nienaber, M.,Pacheco, M.,Barros, A.,Neves, S.,Reis, R.,Zhu, S.,Bohlen, J.,Letzig, D.,Guan, S.,Zheludkevich, M.,Lamaka, S. (2021)
In: Corrosion Science, Vol. 189, , , , 109567. journal article
High temperature tensile, compression and creep behavior of recycled short carbon fibre reinforced AZ91 magnesium alloy fabricated by a high shearing dispersion techniqueKandemir, S.,Gavras, S.,Dieringa, H. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, , , 5, 1753-1767. journal article
Biocompatibility and electrochemical evaluation of ZrO2 thin films deposited by reactive magnetron sputtering on MgZnCa alloyMillán-Ramos, B.,Morquecho-Marín, D.,Silva-Bermudez, P.,Ramírez-Ortega, D.,Depablos-Rivera, O.,García-López, J.,Fernández-Lizárraga, M.,Victoria-Hernández, J.,Letzig, D.,Almaguer-Flores, A.,Rodil, S.E. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, , , 6, 2019-2038. journal article
Effect of Al Content on Texture Evolution and Recrystallization Behavior of Non-Flammable Magnesium Sheet AlloysJo, S.,Letzig, D.,Yi, S. (2021)
In: Metals, Vol. 11, , , 4, 468.
journal articleEffect of Graphene Nanoplatelet Content on Mechanical and Elevated-Temperature Tribological Performance of Self-Lubricating ZE10 Magnesium Alloy NanocompositesKandemir, S.,Yöyler, S.,Kumar, R.,Antonov, M.,Dieringa, H. (2024)
Zur Publikation beim Verlag 
Zur Publikation